Victron Energy is a renowned energy solutions provider known for its high-quality inverters and solar charge controllers. Victron products are characterized by their reliability, easy integration into existing systems and their ability to handle high power peaks.
The MPPT RS SmartSolar from Victron Energy (MPN SCC145110410) is a 48V solar charge controller with a PV input voltage of up to 450 VDC and an output current of 100A. It is used in on-grid and off-grid solar applications where maximum battery charging power is required. Characteristics With ultra-fast Maximum Power Point Tracking (MPPT) Multiple independent MPPT tracking inputs Isolated PV connectors for additional safety Wide MPPT voltage range Light, efficient and quiet Integrated display and Bluetooth communication PV insulation resistance monitoring for safety at higher voltages VE.Can and VE.Direct connection I/O connections Configure and monitor with VictronConnect app or VRM portal The integrated BluetoothSmart connection allows for quick monitoring or configuration of settings via app. The integrated 30-day history shows the individual performance of each MPPT tracker. The app allows the display of e.g. battery voltage and current, PV voltage and current, historical data and trends. The VictronConnect app is available for Android, iOS, Windows and macOS X. When the solar controller is connected to a GX device and the Internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers . Additional units connected in series The SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply "daisy chained" together with an RJ45 cable. When connected together, all individual charge controllers synchronize their charging levels. You can also send your data to a GX device (such as the CerboGX) for monitoring via the same cable. Technical data Battery voltage: 48V Nominal charging current: 100A Max. charging power: 5.8kW at 57.6V Charging algorithm: multi-stage adaptive (customizable) Max. DC PV voltage: 450V MPPT operating voltage range: 80-450V Number of trackers: 2 Max. PV operating input current: 18A per tracker Protection class: IP21 Dimensions: 440 x 313 x 126mm Weight: 7.9 kg Scope of delivery: 1x Victron SmartSolar MPPT RS 450/100 48V charge controller
€1.004,00
The Multiplus 24/3000/70-50 from Victron (MPN PMP243021011) is a device combination of a 24V 2400W sine wave inverter and battery charger. The permanently integrated battery charger delivers an impressive 70A, which means that even large batteries can be fully charged quickly when shore/mains power is available. The 24V sine wave voltage converter built into the Multiplus converts your power from the battery into 230V alternating current. Thanks to the real sine wave, the power quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, a lightning-fast 50A transfer switch is also installed, which can also be used to implement numerous grid-connected solutions. In addition to the VE.Bus port, a COM port is also available for system integration, which enables virtually limitless networking of the Multiplus. Comprehensive and flexible As it has an inverter and charger as well as a lightning-fast 50A transfer switch, it is an ideal inverter for mobile homes, boats or yachts and for grid-connected uninterruptible power supplies in the event of power fluctuations or power outages. It can also be used in grid-connected self-consumption systems that only draw power from the supplier when the battery power is no longer sufficient or as a UPS solution in which the Multiplus steps in when the power from the grid operator suddenly fails, thus ensuring an uninterruptible power supply. Key features of the Multiplus C 24/3000/70-50 2400W continuous power and 6000W peak power, for 24V battery voltage Device combination of inverter with transfer switch and 70A battery charger delivers pure 230V sine wave voltage and a clean 50Hz frequency VE.Bus communication port provides extensive possibilities for networking, system integration, configuration and control of Victron Multiplus devices. supports three-phase operation (3 identical units of the same model required) Multiplus devices can be connected in parallel, up to 6 devices can be connected in parallel and the system performance can thus be significantly increased if necessary 2 AC outputs from Multiplus 3000 and larger. The second output can be used to connect devices that should only run when mains power is available From the Multiplus 3000 onwards, a COM port is available in addition to the VE.Bus port, meaning that there are virtually no limits to system integration PowerControl function enables working with limited generator power as well as limited shore or mains power PowerAssist function enables “performance increase” of generators and shore connection support when required Can be used as a UPS solution for uninterruptible power supply, thanks to the integrated transfer switch with 16A or 50A Can be used for grid-connected self-consumption systems that only draw power from the grid operator when the battery capacity is no longer sufficient or other programmable events have occurred compatible with numerous Victron control and display panels Three-phase operation possible with identical MultiPlus inverters Massive performance expansion possible Apart from the parallel connection, three units of the same model can also be configured for a three-phase output. But that's not all: up to six sets of three units can be connected in parallel to achieve a huge 75 kW / 90 kVA inverter and over 2,000 A charging capacity (calculated with the 5000 version) PowerControl – Working with limited generator power, limited shore or mains power The MultiPlus is a very powerful battery charger. It therefore takes a lot of power from the generator or shore power supply (almost 10A per 5kVA Multi at 230 VAC). The maximum mains or generator current to be drawn can be set using the Multi Control remote control panel. The MultiPlus then takes other connected AC consumers into account and only uses the power that is "left over" for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist – “performance enhancement” of generators and shore connection support This function gives the PowerControl principle a new dimension. It enables the MultiPlus to support alternative sources that are too weak. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated for by energy from the battery. BackUp system: alternating current even in the event of a power failure The Multiplus can be used with both off-grid and grid-connected PV systems as well as other alternative energy systems. Software is available to detect a grid failure. Simple system configuration If settings need to be changed on a single device, this can be done within a few minutes using a DIP switch setting procedure. Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software. monitoring options and on-site control Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, Smartphone or Tablet (Bluetooth Smart), Laptop or Computer (USB or RS232). remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and monitoring of the MultiPlus. In addition, system data can be stored and viewed free of charge on the VRM (Victron Remote Management) website. remote configuration If systems with a Color Control Panel are connected to the Ethernet, they can be accessed and settings can be changed remotely. Scope of delivery: 1x Victron PMP243021011 Multiplus 24/3000/70-50 device combination consisting of 24V 2400W sine wave converter + 24V 70A battery charger + 50A transfer switch 1x user manual
€949,00
The Blue Smart IP22 12/15(3) charger from Victron Energy (MPN BPC121544002) is a professional, compact 12V 15A battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart IP22 12/15(3) charger can be used with equipment in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and mobile homes and charges both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/15(3) Blue Smart IP22 Charger Intelligent charging until the battery reaches its perfect state... The seven-stage charging algorithm gets the most out of your battery. The charger delivers the energy the battery needs, keeps it in a healthy state, ensures better performance... and a longer life. Recovery of deeply discharged "dead" batteries Unlike most other brands and ranges, the Blue Smart IP22 charger will attempt to recharge a deeply discharged battery by forcing a low charge current through it. Normal charging will then resume once sufficient voltage is present between the battery terminals. View battery status remotely with the VictronConnect app The Blue Smart IP22 12/15(3) charger has built-in Bluetooth. This allows you to check the status of the charger and battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app. The main technical features of the 12/15(3) Blue Smart IP22 Charger Victron Part Number: BPC121544002 charges 12V lead-acid, gel, AGM and lithium batteries 15A maximum charging current 3 battery charging outputs very compact dimensions: 235 x 108 x 65mm highly modern, seven-stage loading algorithm with integrated Bluetooth for use with the free VictronConnect app Other features of the 12/15(3) Blue Smart IP22 battery charger Trend-setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat than the industry standard. Additionally, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 7-stage charging algorithm The 12/15(3) Blue Smart charger is characterized by its microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adapted to the type of battery use. Storage mode: Less maintenance and aging when the battery is idle Storage mode is activated whenever no discharge has occurred within 24 hours. The float charge voltage is then reduced to 2.2V/cell (13.2V for a 12V battery) to minimize gassing and prevent corrosion of the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This creates a kind of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC121544002 12/15(3) IP22 Blue Smart Charger 1x User manual
€157,00
The 12V 170Ah Super Cycle battery Victron Energy (MPN BAT412117081) is based on the latest findings in battery electrochemistry and therefore offers significantly more cycles and high resistance to deep discharge. The use of a Super Cycle battery is recommended if an occasional discharge to 100% (deep discharge) or a more frequent discharge to 60-80% is to be expected. Truly innovative: the Victron AGM 12V 170Ah Victron's AGM Super Cycle batteries contain the latest innovations from current developments in battery electrochemistry. The paste on the positive plates does not soften so quickly, even if the battery has been discharged to 100% several times. In addition, the battery chemistry has been supplemented with a number of additives that significantly reduce sulfation in the event of a deep discharge. The bottom line is that these technical innovations mean that the Ultra Deep Cycle batteries manage significantly more cycles and therefore have a longer lifespan. Features of the Victron 12V 170Ah Super Deep Cycle AGM battery Victron Part Number: BAT412117081 Battery nominal voltage: 12V Battery capacity: 170Ah efficient, even after three hundred 100% deep discharges Lifespan at 20°C 7-12 years Cycles at 20°C and 40% discharge: 1000 Cycles at 20°C and 60% discharge: 700 Cycles at 20°C and 80% discharge: 500 Cycles at 20°C and 100% discharge: 300 low internal resistance smaller and lighter than conventional deep-cycle batteries very good tolerance of high current discharge Weight: 45 kg, dimensions (WxLxH): 17.2 x 33.6 x 28 cm Exceptional performance during repeated deep discharge Tests have shown that the Super Cycle battery is still efficient even after at least three hundred 100% deep discharges. During the test, the batteries were discharged daily to 10.8 V with I = 0.2 C20. They were then left in the discharged state for two hours and then recharged with I = 0.2 C20. Most batteries are damaged if they are left in the discharged state for two hours 100 times, but not the Victron 12V 170Ah Super Cycle battery. Super Cycle Batteries: Smaller and lighter Another advantage of the new chemical composition is that the batteries are smaller and weigh less compared to our previous deep cycle AGM batteries. Typical areas of application of Applications with high current discharge, for example solar systems with inverter on the solar battery Applications where complete deep discharge may occur from time to time or where more frequent discharges down to 60-80% are to be expected Perfect for use as a starter battery Drive battery Thrusters, winches etc. Low self-discharge Thanks to the use of high-purity materials and lead-calcium grids in the Super Cycle AGM 12V 170Ah, it is ensured that the self-discharge of this battery is particularly low. This prevents the battery from discharging too quickly during longer periods without charging. Scope of delivery: 1x Victron Energy BAT412117081 AGM 12V 170Ah Super Cycle battery
€480,00
The Blue Smart IP 67 12/13 12V 230V battery charger from Victron Energy (MPN BPC121313006) is a smart, high-performance battery charger of the latest generation with 13A charging current for charging 12V AGM, gel and lead-acid batteries as well as lithium ion batteries. In terms of functionality, the Blue Smart IP67 series is, with the exception of a few functions, identical to the chargers in the Blue Smart IP 65 and IP 22 device families. Only the operating environment for which these chargers are designed differs. Thanks to integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new features become available. Key Features of Blue Smart IP67 12/13 13A Battery Charger Victron Part Number: BPC121313006 Model name: Blue Smart IP 67 12/13 Max. charging current: 13A for battery voltage: 12V DC for mains voltage: 180-265 VAC 45-65 Hz Fully encased: waterproof, shockproof and fire retardant Smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage charging algorithm extends the life of your batteries thanks to integrated storage mode can be used to supply power to 12V consumers high-quality housing made of cast aluminum Protection against application errors: reverse polarity on battery (fuse), protection against overtemperature, protection against output short circuit Fully encased: waterproof, shockproof and fire retardant Water, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are coated with resin. One of the highest charging efficiencies ever! Setting a new industry standard: With an efficiency of at least 92% or more, these chargers produce three to four times less heat. Adaptive 5-stage charging algorithm The Blue Smart charger is characterized by its microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adapted to the type of battery use. "Bulk" (constant current phase) "Absorption" (constant voltage phase) "Recondition" (regeneration phase) "Float" (float voltage phase) "Storage" (storage mode) Storage mode: Less maintenance and aging when the battery is idle Storage mode is activated whenever no discharge has occurred within 24 hours. In storage mode, the float charge voltage is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This creates a type of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Key differences to the Blue Smart IP 65 family The two device groups differ in the following points: the protection class, the IP 67 devices have the best possible protection Blue Smart IP 65 devices have a 7-stage charging algorithm, the IP67 has 5 stages Scope of delivery: 1x Victron BPC121313006 Blue Smart IP67 12/13 13A 12V 230V battery charger 1x User manual 1x 1.5m battery connection cable red/black
€134,00
The Lynx Smart BMS from Victron Energy (MPN LYN034160200) is a dedicated battery management system for Victron lithium smart batteries. It contains a positive and negative busbar, a BMS, a circuit breaker and a battery monitor. The Lynx Smart BMS is part of the modular Lynx Distribution system. Characteristics Built-in 500A circuit breaker for fallback protection Battery monitor that displays the charge level in percent and other data Alarm relay: provides a warning before the system shuts down Status and Bluetooth LED Communication via Bluetooth with VictronConnect app Communication via VE.Can with GX device Incl. Two VE.Can RJ45 terminators Technical data Supply voltage range: 9-58 VDC Supported system voltages: 12, 24 or 48V Reverse polarity protection: yes Main safety protection continuous current: 500A continuous Peak current main safety protection: 600A for 5 minutes Power consumption in active mode: approx. 2.6W (200mA at 13V) Operating temperature range: -40°C - +60°C Protection class: IP22 Dimensions: 190 x 180 x 80 mm Weight: 2kg The Lynx distribution system The Lynx distribution system is a modular busbar system that includes DC connections, distribution, fuse, battery monitoring and/or lithium battery management. The Lynx Distribution System consists of the following parts: Lynx Power In - A 4-terminal positive and negative bus bar for batteries or DC devices Lynx Distributor - A positive and negative bus bar with 4 fused connections for batteries or DC devices together with fuse monitoring Lynx Shunt VE.Can - A positive busbar with space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup in a GX device Lynx Smart BMS - For use with Victron Energy Smart Lithium batteries. It contains a positive busbar with a circuit breaker powered by a battery management system and a negative busbar with a shunt for battery monitoring. It has Bluetooth communication for monitoring and setup via the VictronConnect app and VE.Can communication for monitoring with a GX device and the VRM portal Scope of delivery: 1x Victron Energy Lynx Smart BMS (LYN034160200) 2x RJ45 VE.Can termination resistors 1x User manual
€822,00
The Quattro 24/5000/120-100/100 from Victron (MPN QUA245021010) is a device combination of a 24V 4000W sine wave inverter, a powerful battery charger and transfer switch. It has two switchable AC outputs and 2 AC inputs, each equipped with a 100A transfer switch. The Quattro can be connected to two independent AC sources: for example to the public power grid and a generator or to two generators. The Quattro automatically connects to the active source. The integrated battery charger delivers an impressive 120A, which means that even large batteries can be fully charged quickly if shore/mains power is available. The 24V sine wave voltage converter installed in the Quattro converts your battery power into 230V alternating current. Thanks to the real sine wave, the power quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, 1 lightning-fast 100A transfer switch is installed for each alternating current input. Thanks to these switches, countless applications can also be implemented in the grid-connected area. In addition to the VE.Bus port, 2 COM ports are also available for system integration, which enables virtually unlimited networking of the Quattro. Extremely flexible thanks to 2 AC inputs and 2 AC outputs The main output ensures uninterrupted operation. In the event of a power failure or an interruption in shore/generator power, the Quattro takes over the supply of the connected consumers. The switchover is so fast (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when AC power is available at one of the Quattro's inputs. Consumers that must not discharge the battery, such as a water heater, can be connected to this output. Key features of the Quattro 24/5000/120-100/100 4000W continuous power and 8000W peak power, for 24V battery voltage Device combination of inverter with transfer switch and 120A battery charger delivers pure 230V sine voltage and a clean 50Hz frequency 2 AC inputs with integrated transfer switch / 2 x 100 A maximum switchable current 2 AC outputs + 1x additional output which only allows current to pass to the consumer when the AC input is active. VE.Bus communication port provides extensive possibilities for networking, system integration, configuration and control of Victron Multiplus devices. supports three-phase operation (3 identical units of the same model required) Multiplus devices can be connected in parallel, up to 6 devices can be connected in parallel and the system performance can thus be significantly increased if necessary 2x COM ports are available in addition to the VE.Bus port, meaning there are virtually no limits to system integration PowerControl function enables working with limited generator power as well as limited shore or mains power PowerAssist function enables “performance increase” of generators and shore connection support when required Can be used as a UPS solution for uninterruptible power supply, thanks to the integrated transfer switch with 16A or 50A Can be used for grid-connected self-consumption systems that only draw power from the grid operator when the battery capacity is no longer sufficient or other programmable events have occurred 3 separately programmable relays Compatible with numerous Victron control and display panels very high efficiency and low self-consumption massive performance expansion possible Up to 6 Quattros can be connected in parallel. For example, with six 48/10000/140 units this results in 54 kW/60 kVA power or 840 A charging current. Three units can be connected in a three-phase configuration. But that's not all: up to 6 sets with three devices can be connected in parallel, giving 162 kW/180 kVA inverter power and over 2,500 A charging capacity. PowerControl – Working with limited generator power, limited shore or mains power The MultiPlus is a very powerful battery charger. It therefore draws a lot of power from the generator or shore power supply (almost 10A per 5kVA Multi at 230 VAC). The Multi Control remote control panel can be used to set the maximum mains or generator current to be drawn. The MultiPlus then takes other connected AC consumers into account and only uses the power that is "left over" for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist – “performance enhancement” of generators and shore connection support This function gives the PowerControl principle a new dimension. It enables the Quattro to support alternative sources that are too weak. Load peaks often only occur for a limited period of time. In such a case, the Quattro ensures that insufficient shore power or generator power is immediately compensated for by energy from the battery. BackUp system: alternating current even in the event of a power failure The Quattro can be used in both off-grid and grid-connected PV systems as well as other alternative energy systems. Software is available to detect a grid failure. simple system configuration If settings need to be changed on a single device, this can be done within a few minutes using a DIP switch setting procedure. Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software. On-site monitoring options and control Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, Smartphone or Tablet (Bluetooth Smart), Laptop or Computer (USB or RS232). Remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and monitoring of the MultiPlus. In addition, system data can be stored and viewed free of charge on the VRM (Victron Remote Management) website. Remote configuration If systems with a Color Control Panel are connected to the Ethernet, they can be accessed and settings can be changed remotely. Scope of delivery: 1x Victron QUA245021010 Quattro 24/5000/120-100/100 device combination consisting of 24V 4000W sine wave converter + 24V 120A battery charger + 2 AC inputs with integrated 100A transfer switches 1x User manual
€2.272,00
The Multiplus 12/3000/120-16 from Victron Energy (MPN: PMP123020001) is a device combination of a 12V 2400W sine wave inverter and a battery charger. The integrated battery charger delivers an impressive 120A, which means that even large batteries can be fully charged quickly if shore/mains power is available. The 12V sine wave voltage converter built into the Multiplus converts your power from the battery into 230V alternating current. Thanks to the real sine wave, the power quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, a lightning-fast transfer switch is also installed, which can be used to implement numerous grid-connected solutions. In addition to the VE.Bus port, a COM port is also available for system integration, which enables virtually limitless networking of the Multiplus. Comprehensive and flexible This inverter combines a charger, inverter and a fast transfer switch, perfect for RVs, boats, yachts and grid connection. It ensures uninterrupted power supply in the event of grid fluctuations or outages. Also ideal for self-consumption systems that only access grid power when battery power is low, or as a UPS solution that ensures uninterrupted power flow when the grid fails. About the Multiplus 12/3000/120-16 Powerful: 2400W continuous power, 6000W peak power at 12V battery voltage All-in-one device: inverter with transfer switch, 120A battery charger Reliable power supply: Pure 230V sine wave voltage, 50Hz frequency Networkability: VE.Bus communication port enables comprehensive networking, configuration and control Scalability: Parallel connection of up to 6 devices possible for higher performance Flexibility: 2 AC outputs, COM port from Multiplus 3000 for extended system integration Functions: PowerControl, PowerAssist for optimized power usage Versatility: Can be used as UPS, suitable for grid-connected self-consumption systems Compatibility: Supports various Victron control and display panels Three-phase operation possible with identical MultiPlus inverters Massive performance expansion possible Apart from the parallel connection, three units of the same model can also be configured for a three-phase output. But that's not all: up to six sets of three units can be connected in parallel to achieve a huge 75 kW / 90 kVA inverter and over 2,000 A charging capacity (calculated with the 5000 version) PowerControl Working with limited generator power, limited shore or mains power The MultiPlus is a very powerful battery charger. It therefore draws a lot of power from the generator or shore power supply (almost 10A per 5kVA Multi at 230 VAC). The maximum mains or generator current to be drawn can be set using the Multi Control remote control panel. The MultiPlus then takes other connected AC consumers into account and only uses the power that is "left over" for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist “Performance increase” of generators and shore connection support This function gives the PowerControl principle a new dimension. It enables the MultiPlus to support alternative sources that are too weak. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated for by energy from the battery. BackUp system: alternating current even in the event of a power failure The Multiplus can be used with both off-grid and grid-connected PV systems as well as other alternative energy systems. Software is available to detect a grid failure. Easy system configuration If settings need to be changed on a single device, this can be done within a few minutes using a DIP switch setting procedure. Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software. On-site monitoring options and control Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, Smartphone or Tablet (Bluetooth Smart), Laptop or Computer (USB or RS232). Remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and monitoring of the MultiPlus. In addition, system data can be stored and viewed free of charge on the VRM (Victron Remote Management) website. Remote configuration If systems with a Color Control Panel are connected to the Ethernet, they can be accessed and settings can be changed remotely. Technical data: Input voltage range: 9.5-17V, 19-33V, 38-66V Output voltage: 230VAC±2% - 50Hz ± 0.1% Peak power: 6000W Continuous power: 2400W Battery connection: Four M8 bolts (2 plus and 2 minus connections) 230VAC connection: screw terminals 13mm² (6 AWG) Max. efficiency: 95% Protection class: IP21 Dimensions: 362 x 258 x 218mm Weight: 18kg Scope of delivery: 1x Victron PMP123020001 Multiplus 12/3000/120-16 device combination 1x User manual
€1.193,00
The Multiplus 12/2000/80-32 from Victron (MPN PMP122200000) is a device combination of a 12V 2000W sine wave inverter and battery charger. The permanently integrated battery charger delivers an impressive 80A, which means that even large batteries can be fully charged quickly if shore/mains power is available. The 12V sine wave voltage converter built into the Multiplus converts your power from the battery into 230V alternating current. Thanks to the real sine wave, the power quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, a lightning-fast 32A transfer switch is also installed, which can also be used to implement numerous grid-connected solutions. For system integration, the MultiPlus has a VE.Bus port, which enables virtually limitless networking. Comprehensive and flexible As it has an inverter and charger as well as a lightning-fast 32A transfer switch, it is an ideal inverter for mobile homes, boats or yachts and for grid-connected areas of uninterruptible power supply in the event of power fluctuations or power outages. It can also be used in grid-connected self-consumption systems that only draw power from the supplier when the battery power is no longer sufficient or as a UPS solution in which the Multiplus steps in when the power from the grid operator suddenly fails, thus ensuring an uninterruptible power supply. Key features of the Multiplus 12/2000/80-32 1600W continuous power and 3500W peak power, for 12V battery voltage Device combination of inverter with transfer switch and 80A battery charger delivers pure 230V sine voltage and a clean 50Hz frequency VE.Bus communication port provides extensive networking, system integration, configuration and control options for Victron Multiplus devices supports three-phase operation (3 identical units of the same model required) Multiplus devices can be connected in parallel, up to 6 devices can be connected in parallel and the system performance can thus be significantly increased if necessary PowerControl function enables working with limited generator power as well as limited shore or mains power PowerAssist function enables “performance increase” of generators and shore connection support when required Can be used as a UPS solution for uninterruptible power supply, thanks to the integrated transfer switch Can be used for grid-connected self-consumption systems that only draw power from the grid operator when the battery capacity is no longer sufficient or other programmable events have occurred Compatible with numerous Victron control and display panels Massive performance expansion possible Apart from parallel connection, three units of the same model can also be configured for a three-phase output. But that's not all: up to six sets of three units can be connected in parallel to achieve a huge charging capacity PowerControl – Working with limited generator power, limited shore or mains power The MultiPlus is a very powerful battery charger. It therefore draws a lot of power from the generator or shore power supply. The Multi Control remote control panel can be used to set the maximum mains or generator current that can be drawn. The MultiPlus then takes other connected AC consumers into account and only uses the power that is "left over" for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist – “performance enhancement” of generators and shore connection support This function gives the PowerControl principle a new dimension. It enables the MultiPlus to support alternative sources that are too weak. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated for by energy from the battery. BackUp system: alternating current even in the event of a power failure The Multiplus can be used with both off-grid and grid-connected PV systems as well as other alternative energy systems. Software is available to detect a grid failure. Easy system configuration If settings need to be changed on a single device, this can be done within a few minutes using a DIP switch setting procedure. Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software. On-site monitoring options and control Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, Smartphone or Tablet (Bluetooth Smart), Laptop or Computer (USB or RS232). Remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and monitoring of the MultiPlus. In addition, system data can be stored and viewed free of charge on the VRM (Victron Remote Management) website. Remote configuration If systems with a Color Control Panel are connected to the Ethernet, they can be accessed and settings can be changed remotely. Scope of delivery: 1x Victron PMP122200000 Multiplus 12/2000/80-32 device combination consisting of 12V 2000W sine wave converter + 12V 80A battery charger + 32A transfer switch 1x User manual
€927,00
The Smartsolar MPPT 150/70-tr from Victron Energy (MPN SCC115070210) belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer and processes a whopping 70A of solar power and can work flexibly with 12/24/36/48 V batteries. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new class of device. The SmartSolar 150/70-tr is also available as a version with MC4 connections on the solar side of the charge controller instead of screw terminals. This model can also be operated in parallel with other controllers of the same type. In comparison to the BlueSolar series, the Bluetooth module in the Smartsolar family is already integrated into the controller, which makes the Smart Dongle superfluous with this device. Also new is the optionally available LCD display, which can simply be plugged onto the SmartSolar 150/70-tr when required. The display then provides all the important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar charge controller . It safely covers the cable inputs and the connection terminals of the controller, thus protecting them from external influences and contact. Key product features of the SmartSolar 150/70-tr 70A 12V 24V 36V 48V MPPT Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies Nominal charging current 70A, 150V maximum PV open circuit voltage maximum PV power: 12 V 1000 W / 24 V 2000 W / 48 V 4000 W Victron Energy Part Number (MPN): SCC115070210 Automatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllers with optional LCD display Built-in Bluetooth module for app-based analysis and configuration of the controller (via free Victron app on compatible devices) optional LCD display available Integrated VE.Direct data communication port for connection to additional devices such as the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/70-tr controllers possible adjustable constant charging voltage adjustable trickle charge voltage suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries Fully programmable charging algorithms that can later be manually activated and switched via a switch on the housing integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm Remote controlled switching on and off possible via 2-pin plug Protection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor balances maintenance and constant charge voltage according to temperature Day/night time control and light dimming option Smart data communication via VE.Direct and lightning-fast Bluetooth Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the MPPT 150/70-tr SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the maximum power point in case of partial shading In case of partial shading, there may be two or more maximum power points ( MPP ) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP . However, this may not be the optimal MPP . The innovative algorithm of the SmartSolar 150/70-tr will always maximize the energy yield by adjusting to the optimal MPP . High-speed MPP tracker of the latest generation Especially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Comprehensive electronic protection Protection against reversed battery connection PV backflow preventer Protection against overheating of the device Protection against short circuits Protection against reversed PV connection The VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are linked to the charge controller and thus offers the possibility of communication with additional devices Systempanel GX Color Control. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand shop. Scope of delivery 1x Victron SCC115070210 SmartSolar MPPT 150/70-tr 12V 24V 36V 48V 70A charge controller User manual
€347,00
The Smartsolar MPPT 250/70-tr from Victron Energy (MPN SCC125070210) is part of the latest generation of smart solar controllers from the Dutch premium manufacturer. The controller processes a whopping 70A of solar power and can work flexibly with 12/24/36/48 V batteries with a maximum PV input voltage of 250V DC. The ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new device class. This model can also operate in parallel with other controllers of the same type. Compared to the Smartsolar 150/..... series, the 250/.... series can handle a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar controller family was able to increase efficiency by a further 1 percent to a total of 99%, thereby setting new standards across the industry. This value is currently the best of all solar charge controllers that we know of. Compared to the BlueSolar family, the Bluetooth module is already permanently integrated into the controller in the 250 Smartsolar series, which makes the Smart Dongle superfluous on this device if you want to analyze and configure the controller via Bluetooth using a smartphone or tablet. Also new is the optionally available LCD display, which can be easily plugged onto the SmartSolar 250/70-tr when required. The display then provides all the important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar charge controller . It safely covers the cable entries or the connection terminals of the controller and thus protects them from external influences and contact. Key product features of the SmartSolar 250/70-tr 70A 12V 24V 48V MPPT Victron Energy Part Number: SCC125070210 max. PV power: 12 V 1000 W / 24 V 2000 W / 48 V 4000 W Max. rated charging current 70A, 250V maximum PV open circuit voltage Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies Automatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllers with optional LCD display Built-in Bluetooth module for app-based analysis and configuration of the controller (via free Victron app on compatible devices) optional LCD display available Integrated VE.Direct data communication port for connection to additional devices such as the GX Color Control Panel or a Smart BMV battery monitor groundbreaking efficiency 99% Parallel operation with other 250/85 controllers possible adjustable constant charging voltage adjustable trickle charge voltage suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries Fully programmable charging algorithms that can later be manually activated and switched via a switch on the housing integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm Remote controlled switching on and off possible via 2-pin plug Protection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor balances maintenance and constant charge voltage according to temperature Day/night time control and light dimming options Smart configuration and analysis via Victron Connect app Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the maximum power point in case of partial shading In case of partial shading, there may be two or more maximum power points ( MPP ) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP . However, this may not be the optimal MPP . The innovative algorithm of the SmartSolar controller will always maximize energy yield by adjusting to the optimal MPP . High-speed MPP tracker of the latest generation Especially under overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Optional LCD display available for retrofitting If you prefer to operate and configure the Smartsolar MPPT 250/70-tr directly, you can retrofit the Smartsolar Control SCC900600010 display. The display enables easy configuration of the controller via key input and also provides all important performance data at a glance. Comprehensive electronic protection Protection against reversed battery connection PV backflow preventer Protection against overheating of the device Protection against short circuits Protection against reversed PV connection The VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are linked to the charge controller , thus offering the possibility of communication with additional devices such as the GX Color Control system panel. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand shop. Scope of delivery 1x Victron SCC125070210 SmartSolar MPPT 250/70-tr 12V 24V 48V 70A charge controller 1x User manual
€434,00
The new MultiPlus 12/1200/50-16 (Victron Energy, PMP122120000) is the successor to the Multiplus Compact 12/1200. This device is a modern device combination consisting of a powerful pure sine wave inverter, an advanced 50A battery charger that uses adaptive charging technology and a 16A high-speed AC transfer switch. In the event of a power failure or if the shore power or on-board generator is interrupted, the Multi's inverter is automatically switched on and takes over the supply of power to the connected consumers. The switchover takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. Main features of the MultiPlus 12/1200/50-16 Continuous output power at 25°C: 1200W Victron Energy MPN: PMP122120000 for 12V system voltage integrated 50A mains charger for your batteries integrated 16A mains transfer switch UPS operation possible Extensive accessories available Can be used in numerous applications, whether on land or mobile Proven reliability The complete bridging with a ring transformer topology has proven itself for years. The inverter is short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). PowerControl – (Multiplus 800VA 1200VA only). The Multi Control remote control panel can be used to set the maximum mains or generator current that can be drawn. The MultiPlus then takes other connected AC consumers into account and only uses the power that is "left over" for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist – (Multiplus 800VA 1200VA only) Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated for by energy from the battery. If the load is reduced, ie consumers are switched off, the energy that is then available again can be used to charge the batteries. High inrush power This is required to switch on loads with high inrush currents such as voltage converters for LED lamps, halogen lamps or power tools. Search mode When search mode is set to 'on', the inverter's power consumption is reduced by approximately 70% in no-load operation. In this mode, when the Multi is operating in inverter mode, it switches off at no load or at low load and switches back on for a short period every two seconds. If the output current exceeds a set limit, the inverter resumes operation. If this is not the case, the inverter switches off again. Programmable relay In the basic setting, the multifunction relay acts as an alarm relay, i.e. it switches the device off in the event of a fault (device gets too hot, hum voltage at the input is too high, battery voltage is too low). Scope of delivery: Victron Energy PMP122120000, MultiPlus 12/1200/50-16
€617,00
The Phoenix 12/3000 Smart Inverter from Victron Energy (MPN PIN122300000) is an advanced inverter based on the proven Phoenix series. It offers a continuous output of 3000W and is designed for 12V battery voltage. Compared to the previous models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration. The Phoenix 12/3000 Smart is further characterized by its high switch-on power and reliability and, thanks to the integrated ECO mode, is also in the top league of this device class in terms of self-consumption and efficiency. Features Phoenix 12/3000 Smart for 12V battery voltage, output voltage range 210C – 245V Output power (non-linear): 3000W, 2400W linear continuous load at 25 degrees ambient temperature 6000W peak power handling high starting currents integrated Bluetooth module and VE.Direct port for wireless monitoring and system integration designed for high inrush currents integrated alarm relay, ECO mode Monitoring of input and output voltage, load and alarms etc. via Bluetooth or VE.Direct integrated, two-pin plug for connecting an on/off switch (remote control) Parameters configurable via Bluetooth or VE.Direct Low battery alarm Thresholds for shutdown and restart at low battery voltage levels Dynamic shutdown: load-dependent shutdown threshold Output voltage: 210 - 245V, frequency: 50 Hz or 60 Hz Threshold for ECO mode on/off and ECO mode sensor Alarm relay High reliability thanks to ring transformer topology Complete bridging with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). Very high switch-on power This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Eco mode In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset threshold, the inverter remains switched on. Remote controlled on/off switch A remote-controlled on/off switch or a relay contact can be connected to the two-pin plug. Alternatively, connection H (left) of the two-pin plug can be connected to a battery positive terminal or connection L (right) of the two-pin plug can be connected to the battery negative terminal (or, for example, to the body of a vehicle). Scope of delivery: 1x Victron PIN122300000 Phoenix Smart 12/3000 1x User manual
€782,00
The EV Charging Station NS 22 kW (MPN: EVC200300200) from Victron Energy is a powerful electric vehicle charging station that you can operate in both 3-phase and 1-phase. It delivers an impressive 22 kW AC power in 3-phase operation, while a solid 7.3 kW is still available in 1-phase mode. Although technically identical to the EV Charging Station, the new version features a modern design that is available in 3 different colors. Setup, configuration and monitoring are conveniently done from VictronConnect via Bluetooth and/or the integrated web interface, which can be accessed via a WiFi access point or WiFi LAN. Furthermore, a GX device can be integrated, allowing you to control it remotely. What is particularly noteworthy is that excess solar energy is used directly to charge your vehicle. Manual and timed modes offer additional flexibility to meet the needs of the electric vehicle, the energy supply system and your general electromobility. About the EV Charging Station NS Powerful e-vehicle charging station WLAN communication 1- or 3-phase operation Easy operation and control Via Bluetooth and VictronConnect app Illuminated ring for status display 3 operating modes available Optionally available colored fronts: Black White Operation, control and display A single glance in the VictronConnect app or via Bluetooth gives you full control and overview of all operating parameters and statistics. Furthermore, a Cerbo-GX communication center can optionally be used for remote monitoring. The charging station is equipped with a fully programmable RGB light ring around the charging port, which makes it possible to see the status of the device at a glance. Using the integrated web interface, this light ring can be individually configured to display different light effects depending on the current status (disconnected, charged, in operation, etc.). Operating modes Manual mode for configuring the output current: In manual mode, it is possible to flexibly configure the output current in the range of 6 to 32 A. The charging power can be controlled in various ways. Either via the web interface, from a GX device and the VRM remote monitoring or via VictronConnect. In this way, it is easy to initiate or stop the charging process manually as soon as a vehicle is connected to the charging station. Optional GX device for VRM remote monitoring: Victron GX Touch 50 display panel for Cerbo GX Victron GX Touch 70 display panel for Cerbo GX Automatic mode to ensure maximum efficiency of the PV system: The charging station automatically detects when excess energy is available and uses only that to charge the vehicle. Instead of the energy loss that would occur if excess energy was lost, it is instead stored in the vehicle's battery. Timed mode to charge the vehicle at specific times: Thanks to a fully programmable timer, the vehicle can be charged at different times. For example, during the night when grid costs are lower. Technical data Input voltage range: 170-265V AC Nominal charging current: 32A / phase Rated power: 22 kW Current output range: 6-32 A Own consumption: 15 mA at 230 V Operating temperature range: -25°C - +50°C Storage temperature range: -40°C - +80°C Protection class: IP44 Weight: 3kg Dimensions: 372 x 292 x 122mm Data communication: Modbus TCP via WLAN, Bluetooth Scope of delivery: 1x Victron Energy EV Charging Station NS 22 kW
€607,00
The LiFePO4 12.8V 100Ah Smart Battery (MPN BAT512110610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, the LiFePO4 12.8/100 Smart stores a whopping 1280Wh of power with very low self-discharge and an outstanding service life. The LiFePO4 battery family from Victron already has an integrated cell balancing and a BMS (Battery Management System) interface. The integrated Bluetooth for connecting to the Li-Ion app rounds off the overall package. Victron LiFePO4 12.8V 100AH Smart Battery Nominal voltage: 12.8V Integrated Bluetooth for connection to the Victron Li-Ion app Victron Part Number: BAT512110610 Nominal energy at 25°C*: 1280Wh Nominal capacity at 25°C/0°C/-25°C: 100Ah / 80Ah / 50Ah Number of cycles at depth of discharge 80%/70%/50%: 2500 / 3000 / 5000 cycles Recommended continuous discharge current: 100A Maximum continuous discharge current: 200A Weight: 16kg Connection terminal: M8 Further technical data can be found in the official data sheet and further down in the “technical data” section. Efficient, economical...: LiFePO4 12.8V 100Ah Smart Battery Although LiFePO4 batteries are expensive compared to AGM batteries or GEL batteries, the higher purchase costs are more than worth it in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries by several times. In addition, the LFP 12.8/100 scores highly in terms of space saving and weight saving, each with 70%. The energy utilization rate of 92% is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance in off-grid systems, especially in off-grid solar and/or wind power plants. All-rounder: infinitely flexible with lithium technology from Victron Energy LiFePO4 Smart batteries from Victron can be implemented in almost all common applications. This technology has long played an important role in the mobile sector. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and irregular charging does not harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000AH at 48V Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, which results in a maximum of 3000Ah at 48V - this corresponds to a maximum storable nominal energy of around 154,000 Wh (when used with the 300Ah 12.8V version). Integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful for detecting a (possible) problem such as a cell imbalance in good time. IMPORTANT NOTE: The use of an additional BMS is mandatory to interrupt or switch off the load when the voltage of a battery cell drops below 2.5V or to stop the charging process when the voltage of a battery cell rises above 4.2V and to switch off the system when the temperature of the cell exceeds 50°C. You can choose between the BMS 12/200 and the VE.Bus BMS – for further details about the devices, please refer to the respective article descriptions. Due to the classification as dangerous goods, this product will be shipped via freight forwarder! Scope of delivery: 1x Victron Energy BAT512110610 LiFePO4 12.8V 100AH Smart Battery 1x User manual Further resources on lithium batteries: Victron LiFePO4 batteries - All product families from the category LiFePO4 batteries from VE Category Lithium Batteries - Complete range with all available batteries from this range
€652,00
The Blue Smart IP65 12/15 12V 230V battery charger (BPC121531064R) is the latest professional charger from Victron Energy with built-in Bluetooth. It is designed to charge 12V batteries of various types and delivers a maximum charging current of 15A. Together with the free VictronConnect app, you can easily and smartly evaluate the activity of your battery charger via your smartphone, tablet or computer and even configure it to a certain extent. Technical highlights of the Blue Smart IP65 12/15 battery charger Easy configuration and setup of the Blue Smart IP65 12/15 via Bluetooth interface suitable for all 12V battery types max. 15A charging current Solid protection against splash water, dust and chemicals thanks to protection class IP65 has several features to extend battery life Automatic temperature adjustment at low or high temperatures automatic power supply function 7-stage intelligent charging algorithm can restore completely discharged batteries “dead batteries” has low energy mode for charging small batteries Victron part number: BPC121531064R Lithium-ion battery mode Ultra-high efficiency “green” battery charger With an efficiency of up to 95%, these chargers generate three to four times less heat than the industry standard. And, after the battery is fully charged, power consumption is reduced to 0.5 watts, which is five to ten times better than the industry standard. Durable, safe and quiet low heat load on electronic components protected against the ingress of dust, water and chemicals. Overheating protection: The output current is reduced linearly when the temperature rises up to 60 °C, so the charger does not fail even at extreme temperatures the chargers are absolutely silent thanks to passive cooling: no fan or other moving parts Reconditioning A lead-acid battery that has not been sufficiently charged or has been left in a discharged state for days or weeks will deteriorate in performance due to sulfation. If the process is stopped in time, the sulfation can be partially reversed by charging the battery with a low current until a higher voltage is reached. Function for recovering completely discharged batteries Most chargers with reverse polarity protection will not detect and therefore will not recharge a battery that has been discharged to zero or near zero volts. However, the Blue Power charger will attempt to recharge a completely discharged battery at a low current and will resume normal charging after sufficient voltage has been built up across the battery terminals. Optional accessories Blue Smart IP 65 12/15 BPC121531064R 12 V cigarette lighter plug with fuse 2 meter extension cable Connection terminals with fuses M6 cable lug connector with fuse Scope of delivery: 1x Victron BPC121531064R Blue Smart IP65 12/15 12V 230V battery charger 1x User manual 1x connection terminals 1x M8 cable lug connector
€163,00
The Victron Phoenix 24/1200VE.Direct (MPN PIN242120200) is a small sine wave inverter with 1000W continuous power. The device converts 24V direct current from your battery into 230V AC alternating current with a pure sine wave voltage and uncompromising power quality that is also ideal for sensitive electronic products. trend-setting efficiency and modern system communication The efficiency of the Phoenix is excellent and, thanks to the ECO mode, one of the highest in its class. Using the VE.Direct communication port, you can connect the device to a computer or smartphone with optional accessories and program some system parameters such as the switch-off voltage and switch-on voltage when the battery is empty completely freely! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter. The performance range of the Phoenix VE.Direct 24/1200 series is currently unique on the market for the price and goes far beyond the capabilities of other devices in the same performance class. Technical features of the Phoenix 1241200 VE.Direct 1000 watts continuous power at 230V 50Hz sine wave voltage 1200 watts continuous power at non-linear load full control over almost all system parameters suitable for all common 24V batteries 230V AC power with pure sine wave delivers perfect power quality Freely programmable switch-on and switch-off thresholds freely adjustable output voltage in the range of 210 – 245V Technical highlights of the Phoenix VE.Direct series 250VA – 1200VA VE.Direct connection allows the power converter to be connected to a computer (VE.Direct to USB interface cable required) or your smartphone on which you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Low battery alarm trigger and reset thresholds + Low battery shutdown and restart thresholds + Output voltage 210 - 245V + Low battery shutdown and restart thresholds + Frequency 50 Hz or 60 Hz + ECO mode on/off threshold and ECO mode sensor Integrated ECO mode: In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). If the load exceeds a preset threshold, the inverter remains switched on. Proven reliability of the power converter: The complete bridging with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). High inrush power: This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Remote on/off switching possible: A remote on/off switch can be connected with a two-pin plug or between the positive pole of the battery and the left contact of the two-pin plug. Scope of delivery: 1x Victron PIN242120200 Phoenix 24/1200 24V to 230V 1000W 50Hz 60Hz
€303,00
The Phoenix Smart Charger 12/50(1+1) IP43 from Victron Energy (MPN PSC125051085) is a powerful battery charger of the latest generation. The device is designed for 12V battery voltage and offers not only the powerful 50A main charging output but also a secondary charging output with 3A charging power for a starter battery. The Phoenix Smart Charger 12/50(1+1) IP43 with its integrated Bluetooth module fits into Victron's ever-growing Smart family, which can be perfectly networked and centrally controlled in various ways. In addition to the Bluetooth module, there is also a VE.Direct connection and a freely programmable relay. The Smart Battery Sense can also be optionally connected to control the battery temperature compensation. The proven five-stage charging algorithm and the option to program your own charging algorithm make the Phoenix Smart Charger 12/50(1+1) IP43 a universally applicable high-tech battery charger that can optimally charge almost any battery type. Perfect battery charger for boats and vehicles Phoenix Smart battery chargers that contain (1+1) in the model name have a main charging output with full charging current and a 3A secondary charging output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name were developed especially with the needs of the marine sector in mind and offer three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/50(1+1) IP43 integrated Bluetooth module integrated VE.Direct connections 1x 50A main charging output and 1 additional secondary charging output for starter batteries automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase optimally charges all common battery types Prevent damage caused by gassing thanks to BatterySafe mode Reduced aging through storage with the storage mode also charges LiFePO4 batteries and can be connected to a BMS via optocoupler fully programmable charging algorithm Remote On/Off can be used as a power source Technical features of the Phoenix Smart 12/30(1+1) Victron Part Number: PSC125051085 Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3A charge) Maximum rated charging current: 50A, battery voltage: 12V high efficiency: 94% Protection class: IP43 (electronic components), IP22 (connection area) Further information can be found in the technical data three integrated technologies for all-round healthy batteries Variable constant voltage phase: always delivers the right amount of charge When the battery discharge is small (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. Preventing damage from excessive gassing: BatterySafe mode To shorten the charging time, the highest possible charging current was selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the speed of the voltage increase after the gassing voltage has been reached (see also the graphics in the brochure). Less maintenance and aging when the battery is idle: storage mode Storage mode is activated whenever no discharge has occurred within 24 hours. In storage mode, the float charge voltage is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This creates a type of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Also perfect for LiFePO4 battery The Phoenix Smart Charger 12/50(1+1) IP43 can be fitted with an on/off control by connecting a relay or an open collector optocoupler output from a Li-Ion BMS to the remote on/off port. Alternatively, voltage and current can also be fully controlled via Bluetooth. VE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 12/50(1+1) IP43 from Victron is ideal for a wired data connection to a Color Control panel, PC or other devices thanks to the VE.Direct port. Also note the VictronConnect app for Android and IOS, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the VE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events. Required accessories Please note that an AC connection cable is required to connect the Phoenix Smart Charger 12/50(1+1) IP43 to the power grid. This is not included in the scope of delivery. Scope of delivery 1x PSC125051085 Victron Phoenix Smart Charger 12/50(1+1) IP43 1x AC cable clamp 1x User manual
€410,00
The Victron Orion-Tr 12/24-5 (MPN ORI122410110) is an isolated DC DC voltage converter and ensures a regulated direct voltage and thus trouble-free operation of your DC consumers. The device converts the DC input voltage (8-17V) into an adjustable output voltage (20-30V) and delivers a constant continuous current of 5A, which corresponds to an output of 120W. This means you can supply every 12V consumer with exactly the right voltage. For many sensitive electronic devices, maintaining the exact operating voltage is essential for flawless function. The Orion-Tr 12/24-5 can also be connected in parallel with identical devices and has a remote-controlled on/off switch. Important features of the Orion-Tr 12/24-5 120W (with galvanic isolation) 12V DC operating voltage, adjustable output voltage 20-30V can be connected in parallel with similar devices to increase performance remote-controlled on/off switch Protection class IP43 Wide input voltage range: 8V – 17V 120W power at 5A continuous current max. 6.3A output current high efficiency of 87% only 0.42 KG weight Not designed to charge batteries. Please consider using an Orion-Tr Smart to charge the batteries. DC-DC converters of the Orion family generate a clean output voltage in the range of 20 - 30V DC from a 12V power source and compensate for possible line losses as well as fluctuations in the battery voltage. remote control on/off switch The remote on/off connection eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power-saving switch or by the motor's run/stop switch (see manual). can be connected in parallel to increase the output current An unlimited number of identical devices can be connected in parallel to increase the output power. Scope of delivery: 1x Victron Energy ORI122410110 Orion 12/24-5 DC DC converter 12V to 24V (20-30V adjustable) 5A 120W
€59,23
The AGM 12V 220Ah deep-cycle battery from Victron Energy (MPN BAT412201084) is characterized by high cycle stability and, due to its low internal resistance, is ideal for applications with high-current discharge, such as when operating an inverter in a solar system. Features of the Victron 12V 220Ah Deep Cycle AGM Battery Victron Part Number: BAT412201084 Battery nominal voltage: 12V Battery capacity: 220Ah Lifespan at 20°C 7-10 years Cycles at 20°C and 30% discharge: 1500 Cycles at 20°C and 50% discharge: 600 Cycles at 20°C and 80% discharge: 400 low internal resistance very good tolerance of high current discharge Weight: 65 kg, dimensions (WxLxH): 52.2 x 23.8 x 24 cm Typical areas of application of Applications with high current discharge, for example solar systems with inverter on the solar battery Perfect for use as a starter battery Drive battery Thrusters, winches etc. Low self-discharge Thanks to the use of high-purity materials and lead-calcium grids in the Victron AGM 12V 220Ah battery, the self-discharge of this battery is particularly low. This prevents the battery from discharging too quickly during longer periods without charging. Perfect contact: equipped with M8 copper cable lug The deep-cycle battery 12V 220Ah offers the best possible contact thanks to the permanently integrated copper cable lugs and thus ensures a perfect current flow, without any loss of performance due to a poor battery connection. Scope of delivery: 1x Victron Energy BAT412201084 AGM 12V 220Ah deep cycle battery
€465,00
The Multi RS Solar 48/6000/100-450/100 Dual (MPN PMR482602020) from Victron Energy's renowned product range combines the functions of a hybrid inverter and a battery charger in an extremely powerful device combination to meet your energy needs efficiently and reliably. In mid-2023, the original single MPPT tracker was further developed into this dual MPPT tracker model with two independent MPPT tracker inputs for a total of 6 kWp PV power. Thanks to high frequency technology and a new design, the powerful device combination weighs only 11 kg, has excellent efficiency, low standby power and is also very quiet in operation. Dual model with 4 operating modes Hybrid mode: Stores excess solar energy in a battery for use at night or during times of high demand. Provides additional power from the battery when demand exceeds grid capacity. Backup Mode: Switches to backup mode during a power failure. Off-grid mode: Works without a power connection. Generator Mode: Controls the generator to minimize run time. Provides additional power from the battery when demand exceeds the generator's capacity. The Victron Multi RS Solar Hybrid inverter/charger Dual MPPT tracker and 6000 VA power Efficient battery charging, pulse width modulation (PWM) Protective functions: Device fuse FKS MasterBus compatible: integration into energy management systems Versatile applications Programmable relay Energy optimization through feed-in User-friendly, intuitive display Powerful and flexible The state-of-the-art device combination offers an impressive peak power of 6000 VA (watts), which can handle even demanding applications such as powering household appliances, office equipment or electric vehicles. Not only does it provide a reliable power supply, it also allows you to feed excess energy back into the batteries and thus increase self-consumption. With an input voltage of 48 V and a charging current of 100 A, this device enables fast and efficient charging of your batteries. The integrated pulse width modulation (PWM) for charging voltage control ensures optimal charging of your batteries, while the device fuse FKS (Fast-Blow Fuse) protects the device and your energy system from overload and short circuits. PowerControl and PowerAssist The PowerControl function limits the maximum mains or generator current to make the Multi RS consider other AC loads. It then only uses excess power to charge the battery, preventing overloads. The PowerAssist function ensures that batteries are immediately supported during short-term load peaks and charged when the load is reduced. Easy operation and monitoring With a user-friendly display and intuitive interface, you can easily monitor and adjust the operating status and settings, as well as the battery, inverter and solar parameters, of the Victron Multi RS Solar 48/6000/100-450/100 Dual. Thanks to MasterBus compatibility, you can seamlessly integrate the device into a smart energy management system and also centrally control multiple devices with a smartphone or other Bluetooth-enabled device via the VictronConnect app. Technical data: Inverter: DC input voltage range: 38-62 V AC output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1 % Max. continuous current: 25 A AC Max. output power: 5300 W at 52 VDC Peak power: 9 kW for 3 s / 7 kW for 4 min Short circuit output current: 45 A Max. AC output overcurrent protection: 30 A Efficiency: 96.5% at 1kW load Solar: Max. PV test voltage: 450 V Starting voltage: 120 V MPPT operating voltage range 80-450 V Max. operational PV input current limit: 13 A Max. PV conversion power: total 6 kW - 3 kW per tracker Max. PV short circuit current: 16 A Earth fault trip level: 30 mA Insulation failure level: 100 kΩ Charger: Nominal voltage: 230 VAC Input voltage range: 187-265 VAC Nominal frequency: 50 Hz Input frequency: 45-65 Hz AC inrush current: Nz programmable charging voltage range: 36-60 V Charging voltage "constant voltage": 57.6 V (adjustable) "Trick" charging voltage: 55.2 V (adjustable) Max. charging current from AC: 88 A @ 57.6 VDC Max. charging current total (AC+PV): 100 A DC Battery temperature sensor: included Battery voltage sensor: yes General: Additional output (AC-out-2): yes Three-phase and parallel operation: 2x 2023 Q4 Connections: VE.Direct, VE.Can & Bluetooth Bluetooth frequency and power: 2402-2480 MHz, 4 dBm Operating temperature range -40 to +65 °C Maximum altitude 2000 m Humidity: max. 95% non-condensing Protection class: IP21 Battery connection: M8 bolt PV connection: 2 strings with MC4 230VAC connection: screw terminals 10 mm² (6 AWG) Dimensions: 425 × 460 × 125 mm Weight: 12.3kg Scope of delivery: 1× Victron Multi RS Solar 48/6000/100-450/100 Dual
€1.716,00
The Blue Smart IP 67 12/7 12V 230V battery charger from Victron Energy (MPN BPC120713006) is a smart, high-performance battery charger of the latest generation with 7A charging current for charging 12V AGM, gel and lead-acid batteries as well as lithium ion batteries. In terms of functionality, the Blue Smart IP67 series is, with a few exceptions, identical to the chargers in the Blue Smart IP 65 and IP 22 device families. Only the operating environment for which these chargers are designed differs. Thanks to integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new features become available. Key features of the Blue Smart IP67 12/7 Battery Charger Victron Part Number: BPC120713006 Model name: Blue Smart IP 67 12/7 Max. charging current: 7A for battery voltage: 12V DC for mains voltage: 180-265 VAC 45-65 Hz Fully encased: waterproof, shockproof and fire retardant Smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage charging algorithm extends the life of your batteries thanks to integrated storage mode can be used to supply power to 12V consumers high-quality housing made of cast aluminum Protection against application errors: reverse polarity on battery (fuse), protection against overtemperature, protection against output short circuit Fully encased: waterproof, shockproof and fire retardant Water, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are coated with resin. One of the highest charging efficiencies ever! Setting a new industry standard: With an efficiency of at least 92% or more, these chargers produce three to four times less heat. Adaptive 5-stage charging algorithm The Blue Smart charger is characterized by its microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adapted to the type of battery use. "Bulk" (constant current phase) "Absorption" (constant voltage phase) "Recondition" (regeneration phase) "Float" (float voltage phase) "Storage" (storage mode) Storage mode: Less maintenance and aging when the battery is idle Storage mode is activated whenever no discharge has occurred within 24 hours. In storage mode, the float charge voltage is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This creates a type of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Key differences to the Blue Smart IP 65 family The two device groups differ in the following points: the protection class, the IP 67 devices have the best possible protection Blue Smart IP 65 devices have a 7-stage charging algorithm, the IP67 has 5 stages Scope of delivery: 1x Victron BPC120713006 Blue Smart IP67 12/7 7A 12V 230V battery charger 1x User manual 1x 1.5m battery connection cable red/black
€101,00
The Victron Orion-Tr 48/12-9 (MPN ORI481210110) is an isolated DC DC voltage converter and ensures a regulated direct voltage and thus trouble-free operation of your DC consumers. The device converts the DC input voltage (32-70V) into an adjustable 12V output voltage (10-15V) and delivers a constant continuous current of 9A, which corresponds to an output of 110W. This means you can supply every 12V consumer with exactly the right voltage. For many sensitive electronic devices, maintaining the exact operating voltage is essential for flawless function. The Orion-Tr 48/12-9 can also be connected in parallel with identical devices and has a remote-controlled on/off switch. Important features of the Orion-Tr 48/12-9 110W (with galvanic isolation) 48V DC operating voltage, adjustable 12V output voltage 10-15V can be connected in parallel with similar devices to increase performance remote-controlled on/off switch Protection class IP43 wide input voltage range: 32V – 70V 110W power at 9A continuous current max. 12.5A output current high efficiency of 87% only 0.42 KG weight Not designed to charge batteries. Please consider using an Orion-Tr Smart to charge the batteries. DC-DC converters of the Orion family generate a clean output voltage in the range of 10 - 15V DC from a 48V power source and compensate for possible line losses as well as fluctuations in the battery voltage. Remote control on/off switch The remote on/off connection eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power-saving switch or by the motor's run/stop switch (see manual). Can be connected in parallel to increase the output current An unlimited number of identical devices can be connected in parallel to increase the output power. Scope of delivery: 1x Victron Energy ORI481210110 Orion 48/12-9 DC DC converter 48V to 12V (10-15V adjustable) 9A 120W
€68,00
The Smartsolar MPPT 250/85-tr from Victron Energy (MPN SCC125085210) is part of the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new device class. In addition, this model can operate in parallel with other controllers of the same type. Compared to the Smartsolar 150/..... series, the 250/.... series can handle a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar controller family was able to increase efficiency by a further 1 percent to a total of 99%, thereby setting new standards across the industry. This value is currently the best of all solar charge controllers that we know of. Compared to the BlueSolar family, the Bluetooth module is already permanently integrated into the controller in the 250 Smartsolar series, which makes the Smart Dongle superfluous on this device if you want to analyze and configure the controller via Bluetooth using a smartphone or tablet. Also new is the optionally available LCD display, which can be easily plugged onto the SmartSolar 150/85-tr when required. The display then provides all the important information about the controller. If required, the MPPT WireBox-XL Tr from Victron Energy is the ideal addition to your SmartSolar charge controller . It safely covers the cable entries or the connection terminals of the controller and thus protects them from external influences and contact. Key product features of the SmartSolar 250/85-Tr 85A 12V 24V 48V MPPT Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies Automatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllers with optional LCD display Built-in Bluetooth module for app-based analysis and configuration of the controller (via free Victron app on compatible devices) optional LCD display available max. PV power: 12V 1200W / 24V 2400W / 48V 4900W Max. rated charging current 85A, 150V maximum PV open circuit voltage Max. PV input current: 250 volts Integrated VE.Direct data communication port for connection to additional devices such as the GX Color Control Panel or a Smart BMV battery monitor groundbreaking efficiency 99% Parallel operation with other 250/85 controllers possible Adjustable constant charging voltage Adjustable trickle charge voltage Suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries Fully programmable charging algorithms that can later be manually activated and switched via a switch on the housing integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm Remote controlled switching on and off possible via 2-pin plug Protection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor balances maintenance and constant charge voltage according to temperature Day/night time control and light dimming option Smart configuration and analysis via Victron Connect app Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the maximum power point in case of partial shading In case of partial shading, there may be two or more maximum power points ( MPP ) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP . However, this may not be the optimal MPP . The innovative algorithm of the SmartSolar controller will always maximize energy yield by adjusting to the optimal MPP . High-speed MPP tracker of the latest generation Especially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Optional LCD display available for retrofitting If you prefer to operate and configure the Smartsolar MPPT 250/85-tr directly, you can retrofit the Smartsolar Control SCC900600010 display. The display enables easy configuration of the controller via key input and also provides all important performance data at a glance. comprehensive electronic protection Protection against reversed battery connection PV backflow preventer Protection against overheating of the device Protection against short circuits Protection against reversed PV connection the VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are linked to the charge controller and thus offers the possibility of communication with additional devices Systempanel GX Color Control. The VE.Direct connection is intended for products where complete Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand shop. optionally available as a version with MC4 connectors The devices of classes 250/60-Tr to 250/100-Tr are also available as a version with MC4 connections on the solar side of the charge controller instead of the screw terminals. Scope of delivery 1x Victron SCC125085210 SmartSolar MPPT 250/85-tr 12V 24V 48V 85A charge controller 1x User manual
€498,00
You have seen 24 out of 71 products
