Schneider Electric EVlink Home, 7.4kW, 32A, 1P+N, with fixed 5m charging cable, with RDC-DD
EVlink Home is a simple and easy-to-install charging station that ensures the correct charging of your electric vehicle to minimize peak loads and avoid power overages and associated penalties.
€773,00
Schneider Electric EVlink Home, 7.4kW, 32A, 1P+N, with fixed 5m charging cable, with RDC-DD
EVlink Home is a simple and easy-to-install charging station that ensures the correct charging of your electric vehicle to minimize peak loads and avoid power overages and associated penalties.
€773,00
Schneider Electric EVlink Home, 7.4kW, 32A, 1P+N, 1xT2, with RDC-DD
EVlink Home is a simple and easy-to-install charging station that ensures the correct charging of your electric vehicle to minimize peak loads and avoid power overages and associated penalties.
€689,00
Schneider Electric EVlink Home, 3.7kW, 16A, 1P+N, with fixed 5m charging cable, with RDC-DD
EVlink Home is a simple and easy-to-install charging station that ensures the correct charging of your electric vehicle to minimize peak loads and avoid power overages and associated penalties.
€762,00
Schneider Electric EVlink Pro AC, 22kW, 32A, 3P+N, T2 Socket, MID meter
This EVlink Pro AC product is a wall-mounted charging station for all electric vehicles, compliant with IEC61851-1 standard. It can also be floor-standing, either fixed on a pedestal or integrated into a kit housing. Pedestal and kit housing must be ordered separately. It can be installed both indoors and outdoors. The IP protection level is IP55. The IK protection level is IK10. The operating temperature is between -30°C and 50°C. The storage temperature is between -40°C and 80°C. The output type is a T2 socket with shutter (T2S) fixed to the front of the station. All contacts of the T2S socket are silver plated to prevent overheating. The rated output power is 22 kW. It is supplied three-phase (3P+N). The rated charging current is 32 A at 380 V to 415 VAC with a frequency of 50 Hz to 60 Hz. It can be used with a TT, TN-S or TN-CS earthing system. It is also IT compatible with an additional isolation transformer on the power supply. The charging station is easy to install and commission. It is recommended at home as well as in fleets, on the road or in the workplace. The dimensions are (W) 317 mm x (H) 529 mm x (D) 153 mm. The product weight is 7.2 kg. Its color is white (RAL9003). It has built-in protection against DC residual current with a 6 mA DC residual current detection device (RDC-DD). In addition, it is necessary to meet the EV-Ready requirements. A MID energy meter with an accuracy class of Class 1 is also integrated into the charging station. The charging station can be supplied via a cable coming from the back, top or bottom. To charge an electric vehicle, access control is done through user authentication via RFID or NFC badge. However, the charging station can also be used for free access. The charging start can be delayed. During the charging time, the power can be limited to ensure operational continuity and optimize the charging time of all charging stations based on the same power supply. It has 2 Ethernet RJ45 ports for LAN connection. The parameters are set up via the eSetup app via Bluetooth or EcoStruxure EV Charging Expert. The charging station can be managed in a standalone or in a cluster architecture. The OCCP 1.6 communication protocol is used to connect to the monitoring device. The available services are the charging detail records, the diagnostic functions and the load management. The charging station is CE and EV Ready certified. The firmware of EVlink Pro AC is maintained until 2 years after the end of commercialization.
€1.765,00
Schneider Electric EVlink Pro AC, 22kW, 32A, 3P+N, T2 Cable
This EVlink Pro AC product is a wall-mounted charging station for all electric vehicles. The charging station complies with the IEC 61851-1 standard. It can be fixed to the floor on a stand or integrated into a housing kit. Stand and housing kit must be ordered separately. Installation indoors and outdoors. The IP protection class is IP55. The IK protection class is IK10. The operating temperature is between -30 °C and 50 °C. The storage temperature is between -40 °C and 80 °C. The output type is a connected 5 meter cable with T2 connector with flap (T2S) at the end, installed at the top center of the charging station. All contacts of the T2 connector are silver plated to prevent overheating. The rated output power is 22 kW. Supply three-phase (3P+N). The rated charging current is 32 A at 380 V to 415 VAC at a frequency of 50 Hz to 60 Hz. Can be used with TT, TN-S or TN-CS earthing system. Also IT compatible with additional isolation transformer in the power supply. The charging station is easy to install and commission. Recommended for use at home, in vehicle fleets, on the road or in the workplace. The dimensions are (W) 317 mm x (H) 529 mm x (D) 183 mm. The product weighs 10 kg. The color is white (RAL 9003). Included are built-in leakage current protection with 6 mA leakage current detection (RDC-DD) and a 30 mA residual voltage device (RCD) of type A-Si. For safety reasons, an Mnx undervoltage release is also integrated into the charging station. In addition, the EV Ready requirements must be met. The charging station can be powered by a cable that runs from the back, top or bottom. For charging electric vehicles, access control is done by user authentication via an RFID or NFC badge. However, the charging station can also be used freely. The start of the charging process can be delayed. During the charging time, the power can be limited to ensure service continuity and optimize the charging time of all charging stations based on the same power supply. Two Ethernet RJ45 inputs for LAN connection. The parameters are set with the eSetup app via Bluetooth or EcoStruxure EV Charging Expert. The charging station can be managed in standalone or clustered architecture. The OCCP 1.6 communication protocol is used to connect to the monitoring device. Available services include charging data, diagnostics and charging management. The charging station has CE and EV Ready certification.
€1.659,00
Schneider Electric EVlink Pro AC, 22kW, 32A, 3P+N, T2S Socket, Type A
This EVlink Pro AC product is a wall-mounted charging station for all electric vehicles that complies with the IEC61851-1 standard. It can also be floor-standing, either fixed on a pedestal or integrated into a kit housing. Pedestal and kit housing must be ordered separately. It can be installed both indoors and outdoors. The IP protection level is IP55. The IK protection level is IK10. The operating temperature is between -30 °C and 50 °C. The storage temperature is between -40 °C and 80 °C. The output type is a T2 socket with shutter (T2S) fixed to the front of the station. All contacts of the T2S socket are silver plated to prevent overheating. The rated output power is 22 kW. It is supplied three-phase (3P+N). The rated charging current is 32 A at 380 V to 415 V AC with a frequency of 50 Hz to 60 Hz. It can be used with a TT, TN-S or TN-CS earthing system. It is also IT compatible with an additional isolation transformer on the power supply. The charging station is easy to install and commission. It is recommended at home as well as for fleets, on the road or in the workplace. The dimensions are (W) 317 mm x (H) 529 mm x (D) 153 mm. The product weight is 7.2 kg. Its color is white (RAL9003). It has built-in protection against residual direct current with a 6 mA residual direct current detection device (RDC-DD) and a 30 mA residual current device (RCD) of type A-Si. For safety reasons, an MNx undervoltage release is also integrated in the charging station. In addition, it is necessary to meet the EV Ready requirements. The charging station can be powered by a cable coming from the back, top or bottom. To charge an electric vehicle, access control is done by user authentication via RFID or NFC badge. But the charging station can also be used for free access. The charging start can be delayed. During the charging time, the power can be limited to ensure operational continuity and optimize the charging time of all charging stations based on the same power supply. It has 2 Ethernet RJ45 ports for LAN connection. The parameters are set up via the eSetup app via Bluetooth or EcoStruxure EV Charging Expert. The charging station can be managed in a standalone or cluster architecture. The OCCP 1.6 communication protocol is used to connect to the monitoring device. The available services are the charging detail records, the diagnostic functions and the load management. The charging station is CE and EV Ready certified. The EVlink Pro AC firmware is maintained until 2 years after the end of commercialization.
€1.508,00
Schneider Electric EVlink Pro AC, 22kW, 32A, 3P+N, T2S socket
This EVlink Pro AC product is a wall-mounted charging station for all electric vehicles that complies with the IEC61851-1 standard. It can also be floor-standing, either fixed on a pedestal or integrated into a kit housing. Pedestal and kit housing must be ordered separately. It can be installed both indoors and outdoors. The IP protection level is IP55. The IK protection level is IK10. The operating temperature is between -30 °C and 50 °C. The storage temperature is between -40 °C and 80 °C. The output type is a T2 socket with shutter (T2S) which is fixed to the front of the station. All contacts of the T2S socket are silver plated to prevent overheating. The rated output power is 22 kW. It is supplied three-phase (3P+N). The rated charging current is 32 A at 380 V to 415 VAC with a frequency of 50 Hz to 60 Hz. It can be used with a TT, TN-S or TN-CS earthing system. It is also IT compatible with an additional isolation transformer on the power supply. The charging station is easy to install and commission. It is recommended at home as well as in fleets, on the road or in the workplace. The dimensions are (W) 317 mm x (H) 529 mm x (D) 153 mm. The product weight is 7.2 kg. Its color is white (RAL9003). It has built-in protection against DC residual current with a 6 mA DC residual current detection device (RDC-DD). For safety reasons, the charging station also has an MNx undervoltage tripping aid integrated. In addition, it is necessary to meet the EV Ready requirements. The charging station can be supplied by a cable coming from the back, top or bottom. To charge an electric vehicle, access control is done via user authentication via RFID or NFC badge. But the charging station can also be used for free access. The charging start can be time-delayed. During charging time, the power can be limited to ensure service continuity and optimize the charging time of all charging stations based on the same power supply. It has 2 Ethernet RJ45 ports for LAN connection. The parameters are set up through the eSetup app via Bluetooth or EcoStruxure EV Charging Expert. The charging station can be managed in a standalone or in a cluster architecture. The OCCP 1.6 communication protocol is used to connect to the monitoring device. The available services are the charging detail records, the diagnostic functions and the load management. The charging station is CE and EV Ready certified. The firmware of EVlink Pro AC is maintained until 2 years after the end of commercialization.
€1.327,00
Schneider Electric EVlink Pro AC, 11kW, 16A, 3P+N, T2 cable
This EVlink Pro AC product is a wall-mounted charging station for all electric vehicles. The charging station complies with the IEC 61851-1 standard. It can be mounted on the floor on a stand or integrated into a housing kit. The stand and housing kit must be ordered separately. Installation indoors and outdoors is possible. The IP protection class is IP55. The IK protection class is IK10. The operating temperature is between -30 °C and 50 °C. The storage temperature is between -40 °C and 80 °C. The output type is a connected 5 meter cable with T2 plug with flap (T2S) at the end, installed in the top center of the charging station. All contacts of the T2 plug are silver plated to prevent overheating. The rated output power is 11 kW. Supply three-phase (3P+N). The rated charging current is 16 A at 380 V to 415 VAC at a frequency of 50 Hz to 60 Hz. Can be used with TT, TN-S or TN-CS earthing system. Also IT compatible with additional isolation transformer in the power supply. The charging station is easy to install and commission. Recommended for use at home, in vehicle fleets, on the road or in the workplace. Dimensions are (W) 317mm x (H) 529mm x (D) 183mm. The product weighs 10kg. Colour is white (RAL 9003). Included is a built-in leakage current protection with 6mA leakage current detection (RDC-DD) and a 30mA residual current device (RCD) type A-Si. For safety reasons, an Mnx undervoltage release is also integrated in the charging station. In addition, the EV Ready requirements must be met. The charging station can be powered by a cable running from the back, top or bottom. To charge electric vehicles, access control is carried out by user authentication via an RFID or NFC card. The charging station can also be used freely accessible. The start of the charging process can be delayed. During the charging time, the power can be limited to ensure service continuity and optimize the charging time of all charging stations based on the same power supply. Two Ethernet RJ45 inputs for LAN connection. The parameters are set using the eSetup app via Bluetooth or EcoStruxure EV Charging Expert. The charging station can be managed in standalone or clustered architecture. The OCCP 1.6 communication protocol is used to connect to the monitoring device. Available services are charging data, diagnostics and charging management. The charging station has CE and EV Ready certification.
€1.544,00
Schneider Electric EVlink Pro AC, 11kW, 16A, 3P+N, T2S socket
This EVlink Pro AC product is a wall-mounted charging station for all electric vehicles in accordance with the IEC 61851-1 standard. Installation on the floor is also possible, either attached to a stand or integrated into a housing kit. Stand and housing kit must be ordered separately. Installation indoors and outdoors is possible. The IP protection class is IP55. The IK protection class is IK10. The operating temperature is between -30 °C and 45 °C. The storage temperature is between -40 °C and 80 °C. The output type is a T2 socket with flap (T2S) that is attached to the front of the station. All contacts of the T2S socket are silver plated to prevent overheating. The rated output power is 7.4 kW. Single phase (1P+N) supply. The rated charging current is 32 A at 220 V to 240 VAC at a frequency of 50 Hz to 60 Hz. Can be used with TT, TN-S or TN-CS earthing system. IT compatible with additional isolation transformer in the power supply. The charging station is easy to install and commission. Recommended for apartment buildings, vehicle fleets, on the road or in the workplace. The dimensions are (W) 317 mm x (H) 529 mm x (D) 153 mm. The product weight is 7.2 kg. The color is dark gray (RAL 7016). Included is built-in protection against residual direct current with 6 mA residual direct current detection (RDC-DD) and a 30 mA residual current device (RCD) of type A-Si. For safety reasons, an MNx undervoltage release is also integrated into the charging station. In addition, the EV Ready requirements must be met. In addition, a MID energy meter with accuracy class 1 is integrated into the charging station. The charging station can be powered by a cable that runs from the back, top or bottom. For charging electric vehicles, access control is carried out by user authentication using an RFID or NFC badge. However, the charging station can also be used freely. The charging process can be started with a time delay. During the charging time, the power can be limited to ensure service continuity and to optimize the charging time of all charging stations based on the same power supply. Two Ethernet RJ45 inputs for LAN connection. The parameters are set with the eSetup app via Bluetooth or EcoStruxure EV Charging Expert. The charging station can be managed in standalone or clustered architecture. The OCPP 1.6 communication protocol is used to connect to the monitoring device. The available services are CDR, diagnostic capabilities and charging management. The charging station has CE and EV Ready certification.
€1.403,00
Schneider Electric EVlink Home, 11kW, 16A, 3P+N, 1xT2, with RDC-DD
EVlink Home is a simple and easy-to-install charging station that ensures the correct charging of your electric vehicle to minimize peak loads and avoid power overages and associated penalties.
€684,00
Schneider Electric EVlink Home, 3.7kW, 16A, 1P+N, 1xT2, with RDC-DD
EVlink Home is a simple and easy-to-install charging station that ensures the correct charging of your electric vehicle to minimize peak loads and avoid power overages and associated penalties.
€669,00
Schneider Electric EVlink Pro AC, 22kW, 32A, 3P+N, T2S Socket, Type B
This EVlink Pro AC product is a wall-mounted charging station for all electric vehicles that complies with the IEC61851-1 standard. It can also be floor-standing, either fixed on a base or integrated into a kit housing. Base and kit housing must be ordered separately. It can be installed both indoors and outdoors. The IP protection level is IP55. The IK protection level is IK10. The operating temperature is between -30 °C and 50 °C. The storage temperature is between -40°C and 80°C. The output type is a T2 socket with shutter (T2S) which is fixed to the front of the station. All contacts of the T2S socket are silver plated to prevent overheating. The rated output power is 22kW. It is supplied three phase (3P+N). The rated charging current is 32A at 380V to 415VAC with a frequency of 50Hz to 60Hz. It can be used with a TT, TN-S or TN-CS earthing system. It is also IT compatible with an additional isolation transformer on the power supply. The charging station is easy to install and commission. It is recommended at home as well as in fleets, on the road or in the workplace. The dimensions are (W) 317mm x (H) 529mm x (D) 153mm. The product weight is 7.2kg. Its color is white (RAL9003). It has built-in protection against direct current faults with a residual current device (RCD) type B-EV (electric vehicle). For safety reasons, the charging station also has an MNx undervoltage release integrated. In addition, it is necessary to meet the EV Ready requirements. The charging station can be powered by a cable coming from the back, top or bottom. To charge an electric vehicle, access control is done through user authentication via RFID or NFC badge. However, the charging station can also be used for free access. The charging start can be delayed. During the charging time, the power can be limited to ensure operational continuity and optimize the charging time of all charging stations based on the same power supply. It has 2 Ethernet RJ45 ports for LAN connection. The parameters are set up via the eSetup app via Bluetooth or EcoStruxure EV Charging Expert. The charging station can be managed in a standalone or in a cluster architecture. The OCCP 1.6 communication protocol is used to connect to the monitoring device. The available services are the charging detail records, the diagnostic functions and the load management. The charging station is CE and EV Ready certified. The firmware of EVlink Pro AC is maintained until 2 years after the end of commercialization.
€1.528,00
Schneider Electric EVlink Pro AC, 7.4kW, 32A, 1P+N, T2S socket, MID meter
This EVlink Pro AC product is a wall-mounted charging station for all electric vehicles in accordance with the IEC 61851-1 standard. Installation on the floor is also possible, either attached to a stand or integrated into a housing kit. Stand and housing kit must be ordered separately. Installation indoors and outdoors possible. The IP protection class is IP55. The IK protection class is IK10. The operating temperature is between -30 °C and 45 °C. The storage temperature is between -40 °C and 80 °C. The output type is a T2 socket with flap (T2S) which is attached to the front of the station. All contacts of the T2S socket are silver plated to prevent overheating. The nominal output power is 7.4 kW. Single phase (1P+N) supply. The nominal charging current is 32 A at 220 V to 240 VAC at a frequency of 50 Hz to 60 Hz. Can be used with TT, TN-S or TN-CS earthing system. IT compatible with additional isolation transformer in the power supply. The charging station is easy to install and commission. Recommended for apartment buildings, vehicle fleets, on the road or in the workplace. The dimensions are (W) 317 mm x (H) 529 mm x (D) 153 mm. The product weight is 7.2 kg. The color is dark gray (RAL 7016). Included is built-in protection against residual direct current with 6 mA residual direct current detection (RDC-DD) and a 30 mA residual current device (RCD) of type A-Si. For safety reasons, an MNx undervoltage release is also integrated in the charging station. In addition, the EV Ready requirements must be met. In addition, an MID energy meter with accuracy class 1 is integrated in the charging station. The charging station can be fed by a cable that runs from the back, top or bottom. For charging electric vehicles, access control is carried out by user authentication using an RFID or NFC card. The charging station can also be used freely. The charging process can be started with a time delay. During the charging time, the power can be limited to ensure service continuity and to optimize the charging time of all charging stations based on the same power supply. Two Ethernet RJ45 inputs for LAN connection. Parameters are set using the eSetup app via Bluetooth or EcoStruxure EV Charging Expert. The charging station can be managed in standalone or clustered architecture. The OCPP 1.6 communication protocol is used to connect to the monitoring device. The available services are CDR, diagnostic capabilities and charging management. The charging station has CE and EV Ready certification.
€1.498,00
Schneider Electric (RCBO) Acti9 iCV40N - 1P+N - C20 - 6000A - A-SI Type - 30mA
This Acti9 iCV40 is a modular residual current device with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole, a nominal current of 20A and a C tripping characteristic. The residual current device belongs to class A-SI with a sensitivity of 30mA. The time delay for the residual current protection is instantaneous. The rated short-circuit breaking capacity limit (Icn) is up to 6000A according to EN/IEC 61009-2-1 standard. This product protects against short circuits, cable overloads, electric shocks from indirect contact and fire hazards. The 2 unique Visitrip indicators reduce intervention time by indicating the faulty circuit and quickly identifying the fault. The Visisafe green strip ensures the physical opening of the contacts to allow downstream maintenance. This product complies with EN/IEC 61009-2-1 standard. It has an electrical life of up to 20000 cycles and a mechanical life of up to 20000 cycles. The operating voltage (Ue) is 230VAC. The rated insulation voltage (Ui) is 400VAC. The rated impulse withstand voltage (Uimp) is 4kV. The frequency is 50/60Hz. It is mountable on a DIN rail. The width in 9mm increments is 4. The product color is white (RAL9003). The dimensions are (W) 36mm x (H) 85mm x (D) 73mm. The weight is 210g. According to the IEC 60529 standard, the degree of protection is IP20 and IP40 in the housing. The operating temperature is between -25°C and 60°C. The storage temperature is between -40°C and 85°C.
€129,00
Schneider Electric (RCBO) Acti9 iCV40N - 1P+N - C20 - 6000A - A-SI Type - 30mA
This Acti9 iCV40 is a modular residual current device with overcurrent protection (RCBO). It is a 1P+N miniature circuit breaker with 1 protected pole, a rated current of 20A and a C tripping characteristic. The residual current device is class A-SI with a sensitivity of 30mA. The time delay for residual current protection is instantaneous. The rated short-circuit breaking capacity limit (Icn) is up to 6000A according to the EN/IEC 61009-2-1 standard. This product protects against short circuits, cable overloads, electric shocks due to indirect contact and fire hazards. The 2 unique Visitrip indicators reduce intervention time by indicating the faulty circuit and quickly identifying the fault. The Visisafe green strip ensures the physical opening of the contacts to allow downstream maintenance. This product complies with the EN/IEC 61009-2-1 standard. It has an electrical life of up to 20000 cycles and a mechanical life of up to 20000 cycles. The operating voltage (Ue) is 230VAC. The rated insulation voltage (Ui) is 400VAC. The rated impulse withstand voltage (Uimp) is 4kV. The frequency is 50/60Hz. It is DIN rail mountable. The width in 9mm increments is 4. The product color is white (RAL9003). The dimensions are (W) 36mm x (H) 85mm x (D) 73mm. The weight is 210g. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in the housing. The operating temperature is between -25°C and 60°C. The storage temperature is between -40°C and 85°C.
€129,00
Schneider Electric Modicon Unmanaged Switch - 10/100BASE-TX - 10/100BASE-TX - 8 port(s) copper cable
This product is part of the Modicon Networking range, a Modicon standard unmanaged switch offering. This unmanaged switch comes with Ethernet TCP/IP protocol. It has 8 transmission ports for copper cables. It provides easy connectivity for multiple Ethernet devices and gives customers more options for industrial-grade applications. This product operates with a power consumption of 1.5 W and a rated voltage of 12 to 24 V DC. It has a detachable 3-pin power connector. The dimensions are 38 mm (width) x 102 mm (height) x 79 mm (depth). The weight is 0.150 kg. The product has shielded connectors which are suitable for small, isolated networks or systems with light network traffic and low complexity networks. CE, UL, RCM, UKCA and EAC certified and complies with UL 61010 and EN/IEC 61131 standards. Can be mounted on a symmetrical DIN rail. Low power consumption and compact footprint. Easy connectivity for multiple Ethernet devices. The Modicon Networking range offers you a smart, flexible way to integrate Ethernet solutions into your operations, from the device level through the control network to your enterprise network.
€251,00
Schneider Electric (MCB) Acti9 iC40 - 3P+N - C20 - 4500A (IEC/EN 60898-1) - 6kA (IEC/EN 60947-2)
This Acti9 iC40 is a low voltage circuit breaker. It is a 3P+N circuit breaker with 3 protected poles and a connected neutral, a nominal current of 20 A and tripping characteristic C. The breaking capacity of this circuit breaker is 4500 A at 400 VAC according to standard EN/IEC 60898-1 (household standard) and 6 kA at 400 VAC according to standard EN/IEC 60947-2 (industrial standard). This iC40 circuit breaker complies with both the household standard EN/IEC 60898-1 and the industrial standard EN/IEC 60947-2. This circuit breaker protects circuits against short circuits and overload currents. Simplified installation and maintenance thanks to convenient clip fastening. This Schneider Electric circuit breaker has an electrical life of up to 20,000 cycles and a mechanical life of up to 20,000 cycles. The assigned Ue operating voltage is 400 VAC. The assigned Ui insulation voltage is 440 VAC. The assigned Uimp rated impulse withstand voltage is 4 kV. The network frequency is 50 Hz or 60 Hz. For modular installation, the circuit breaker is mountable on a DIN rail. The width of this circuit breaker is 3 modules of 18 mm each and the pollution degree is 3. This product is finished in white (RAL 9003). The dimensions are 54 mm (W) x 85 mm (H) x 74 mm (D). The weight is 345 g. According to standard IEC 60529, the protection class is IP20. This increases to IP40 when mounted in a modular housing with insulation class II. The operating temperature is between -25 °C and 70 °C. The storage temperature is between -40 °C and 85 °C.
€51,00
Schneider Electric (MCB) Acti9 iC40 - 1P+N - C20 - 4500A (IEC/EN 60898-1) - 6kA (IEC/EN 60947-2)
This Acti9 iC40 is a low voltage circuit breaker. It is a 1P+N circuit breaker with 1 protected pole and a connected neutral, a nominal current of 20 A and let-through current characteristic C. The breaking capacity of this circuit breaker is 4500 A at 230 VAC according to standard EN/IEC 60898-1 (household standard) and 6 kA at 230 VAC according to standard EN/IEC 60947-2 (industrial standard). This iC40 circuit breaker complies with both the household standard EN/IEC 60898-1 and the industrial standard EN/IEC 60947-2. This circuit breaker protects circuits against short circuits and overload currents. Simplified installation and maintenance thanks to convenient clip fastening. This Schneider Electric circuit breaker has an electrical life of up to 20,000 cycles and a mechanical life of up to 20,000 cycles. The assigned Ue operating voltage is 230 VAC. The assigned Ui insulation voltage is 400 VAC. The assigned Uimp rated impulse withstand voltage is 4 kV. The network frequency is 50 Hz or 60 Hz. For modular installation, the circuit breaker is DIN rail mountable. The width of this circuit breaker is 1 module of 18 mm and the pollution degree is 3. This product is white (RAL 9003) in color. The dimensions are 18 mm (W) x 85 mm (H) x 74 mm (D). The weight is 120 g. According to IEC 60529, the protection class is IP20. This increases to IP40 when mounted in a modular housing with insulation class II. The operating temperature is between -25 °C and 70 °C. The storage temperature is between -40 °C and 85 °C.
€25,00
Schneider Electric (RCBO) Acti9 iCV40N - 3P+N - C40 - 6000A - A-SI Type - 30mA
This Acti9 iCV40N modular residual voltage circuit breaker is a system circuit breaker equipped with earth fault protection. It is a 3P+N residual voltage circuit breaker with 3 protected poles and a connected neutral, a nominal current of 40 A and let-through current characteristic C. The earth fault protection class is type A-SI with earth fault sensitivity of 30 mA. The earth fault protection is triggered immediately and has no time delay. The Icn breaking capacity is 6000 A at 400 VAC according to EN/IEC 61009-2-1. This residual voltage circuit breaker protects circuits against short circuits, overload currents, dangerous electric shocks and fire hazards. The two unique VisiTrip indicators reduce the time needed to find the tripped circuit breaker by clearly indicating it. The green VisiSafe indicators guarantee the physical opening of the contacts to enable downstream maintenance. This product complies with the EN/IEC 61009-2-1 standard for residual voltage circuit breakers. This Schneider Electric residual voltage circuit breaker has an electrical life of up to 10,000 cycles and a mechanical life of up to 20,000 cycles. The assigned Ue operating voltage is 230 VAC. The assigned Ui insulation voltage is 440 VAC. The assigned Uimp nominal impulse withstand voltage is 4 kV. The network frequency is 50/60 Hz. DIN rail mountable for modular installation. The width of this residual voltage circuit breaker is 5 modules of 18 mm each. This product is white (RAL 9003). The dimensions are 90 mm (W) x 93 mm (H) x 73 mm (D). The weight is 500 g. According to IEC 60529, the protection class is IP20. It increases to IP40 when mounted in a modular enclosure with insulation class II. The operating temperature is between -25 °C and 60 °C. The storage temperature is between -40 °C and 85 °C.
€185,00
Schneider Electric (RCBO) Acti9 iCV40N - 1P+N - C40 - 6000A - A Type - 30mA
This Acti9 iCV40 is a modular residual current device with built-in overcurrent protection device (RCBO). It is a 1P+N circuit breaker with 1 protected pole, a 40 A In rated current and tripping characteristic C. The earth fault protection class is type A with earth fault sensitivity of 30 mA. Earth fault protection without time delay. The Icn short-circuit nominal breaking capacity is up to 6000 A according to standard EN/IEC 61009-2-1. This product protects against short circuits, cable overloads, electric shocks from indirect contact and fire hazards. Its two unique VisiTrip indicators reduce intervention time by indicating the faulty circuit and quickly identifying the type of fault. The green VisiSafe strip guarantees the physical opening of the contacts to allow downstream maintenance. This product complies with the EN/IEC 61009-2-1 standard. It has an electrical life of up to 10,000 cycles and a mechanical life of up to 20,000 cycles. The Ue operating voltage is 230 VAC. The Ui rated insulation voltage is 400 VAC. The Uimp rated impulse withstand voltage is 4 kV. The frequency is 50/60 Hz. DIN rail mountable. The width in 9 mm increments is 4. The product color is white (RAL 9003). The dimensions are (W) 36 mm x (H) 85 mm x (D) 73 mm. The weight is 210 g. The protection class is IP20. This increases to IP40 in modular housing according to standard IEC/EN 60529. The operating temperature is between -25 °C and 60 °C. The storage temperature is between -40 °C and 85 °C.
€161,00
Schneider Electric (RCBO) Acti9 iCV40N - 1P+N - C20 - 6000A - A Type - 30mA
This Acti9 iCV40 is a modular residual current device with built-in overcurrent protection device (RCBO). It is a 1P+N circuit breaker with 1 protected pole, a 20 A In rated current and tripping characteristic C. The earth fault protection class is type A with earth fault sensitivity of 30 mA. Earth fault protection without time delay. The Icn short-circuit breaking capacity is up to 6000 A according to EN/IEC 61009-2-1. This product protects against short circuit, cable overload, electric shock from indirect contact and fire hazards. Its two unique VisiTrip indicators reduce intervention time by indicating the faulty circuit and quickly identifying the type of fault. The green VisiSafe strip guarantees the physical opening of the contacts to allow downstream maintenance. This product complies with EN/IEC 61009-2-1. It has an electrical life of up to 20,000 cycles and a mechanical life of up to 20,000 cycles. The Ue operating voltage is 230 VAC. The Ui rated insulation voltage is 400 VAC. The Uimp rated impulse withstand voltage is 4 kV. The frequency is 50/60 Hz. DIN rail mountable. The width in 9 mm pitches is 4. The product color is white (RAL 9003). The dimensions are (W) 36 mm x (H) 85 mm x (D) 73 mm. The weight is 210 g. The protection class is IP20. This increases to IP40 in modular housing according to IEC/EN 60529. The operating temperature is between -25 °C and 60 °C. The storage temperature is between -40 °C and 85 °C.
€143,00
Schneider Electric (MCB) Acti9 IC60N - 4P - C20 - 6000A (IEC/EN 60898-1) - 10kA (IEC/EN 60947-2)
This Acti9 iC60N is a low voltage circuit breaker. It is a 4P circuit breaker with 4 protected poles, a nominal current of 20 A and tripping characteristic C. The breaking capacity of this circuit breaker is 6000 A at 400 VAC according to standard EN/IEC 60898-1 (household standard) and 20 kA at 220 VAC to 240 VAC according to standard EN/IEC 60947-2 (industrial standard). This iC60N circuit breaker complies with both the household standard EN/IEC 60898-1 and the industrial standard EN/IEC 60947-2. This circuit breaker protects circuits against short circuits and overload currents. The unique VisiTrip indicator shortens the search for the tripped circuit breaker by clearly indicating it. The green VisiSafe indicator guarantees the physical opening of the contacts to enable downstream maintenance. The quick release mechanism extends the life of this component. This Schneider Electric circuit breaker has an electrical life of up to 10,000 cycles and a mechanical life of up to 20,000 cycles. The Ui rated insulation voltage is 500 VAC. Lower circuit protection costs thanks to restriction class 3 (according to EN/IEC60898-1). Can be mounted on DIN rail for modular installation. The width of this circuit breaker is 4 modules of 18 mm each. The pollution degree is 3 and the overvoltage category is IV. This product is white (RAL 9003). The dimensions are 72 mm (W) x 85 mm (H) x 78.5 mm (D). The weight is 0.5 kg. According to IEC 60529, the protection class is IP20. This increases to IP40 when installed in a modular housing with insulation class II. The operating temperature is between -35 °C and 70 °C. The storage temperature is between -40 °C and 85 °C.
€93,00
Schneider Electric (RCCB), Acti9, ID, 4P, 40A, Type B-EV, 30mA
The Acti 9 iID from Schneider Electric is a 4-pole modular residual current device (RCCB) with a nominal current of 40A and an operating voltage of 400V. It features a short-circuit and overload tripping capacity of 1500A (Im/IΔm), an electrical life of 15,000 cycles and a mechanical life of 20,000 cycles. The IP20 protection degree increases to IP40 in an enclosure. Installation is simplified by fixing to a DIN rail, and it can be installed on both the input and output side of the system. It complies with the IEC/EN 61008-2-1 and IEC/EN 62423 standards, with residual current protection class B-SI, which makes it particularly suitable for EV installations. This environmentally friendly product is fully recyclable and reusable. It improves continuity of service thanks to the VisiTrip indicator. Selecting the right component is simplified by clear part numbers and installation is made easier by ergonomic and safe IP20B terminal covers and robust connectors. New for residual current circuit breakers in the final distribution, specially developed for EV installations Improved service continuity with VisiTrip Easy selection through meaningful part numbers Easy installation with quick, ergonomic & safe IP20B terminal covers & robust connectors
€513,00
You have seen 24 out of 28 products