Discover innovative building technology solutions for your home in the Energie24.Shop. Our modern energy storage solutions and hot water tanks for homes offer high efficiency and environmental friendliness. Optimize your heating with our efficient buffer storage systems and enjoy comfort with our air conditioning systems for private households.

Our ecological hot water solutions and solar-assisted hot water tanks are ideal for energy-conscious households. Benefit from smart home air conditioning systems for automated and energy-efficient cooling. Our water storage systems and high-performance buffer storage are key components for sustainable building technology. #ModernHaustechnik 🏡🌞❄️

31 products

  • Schneider Electric (MCB) Acti9 iC40 - 3P+N - C20 - 4500A (IEC/EN 60898-1) - 6kA (IEC/EN 60947-2)

    Schneider Electric (MCB) Acti9 iC40 - 3P+N - C20 - 4500A (IEC/EN 60898-1) - 6kA (IEC/EN 60947-2)

    This Acti9 iC40 is a low voltage circuit breaker. It is a 3P+N circuit breaker with 3 protected poles and a connected neutral, a nominal current of 20 A and tripping characteristic C. The breaking capacity of this circuit breaker is 4500 A at 400 VAC according to standard EN/IEC 60898-1 (household standard) and 6 kA at 400 VAC according to standard EN/IEC 60947-2 (industrial standard). This iC40 circuit breaker complies with both the household standard EN/IEC 60898-1 and the industrial standard EN/IEC 60947-2. This circuit breaker protects circuits against short circuits and overload currents. Simplified installation and maintenance thanks to convenient clip fastening. This Schneider Electric circuit breaker has an electrical life of up to 20,000 cycles and a mechanical life of up to 20,000 cycles. The assigned Ue operating voltage is 400 VAC. The assigned Ui insulation voltage is 440 VAC. The assigned Uimp rated impulse withstand voltage is 4 kV. The network frequency is 50 Hz or 60 Hz. For modular installation, the circuit breaker is mountable on a DIN rail. The width of this circuit breaker is 3 modules of 18 mm each and the pollution degree is 3. This product is finished in white (RAL 9003). The dimensions are 54 mm (W) x 85 mm (H) x 74 mm (D). The weight is 345 g. According to standard IEC 60529, the protection class is IP20. This increases to IP40 when mounted in a modular housing with insulation class II. The operating temperature is between -25 °C and 70 °C. The storage temperature is between -40 °C and 85 °C.

    Read more

    €60,69

  • LG Wärmepumpe Therma V Hydrosplit IWT R32 16kW 3-phasig HU163MRB HN1616Y - NeueEnergie24 LG Wärmepumpe Therma V Hydrosplit IWT R32 16kW 3-phasig HU163MRB HN1616Y - NeueEnergie24

    LG heat pump Therma V Hydrosplit IWT R32 16kW 3-phase HU163MRB HN1616Y

    Air/water heat pump Therma V Hydrosplit R32, HU163MRB, 3-phase, power range 16 kW + indoor unit HN1616Y.NB1 The LG Therma V Hydrosplit heat pump series separates the indoor and outdoor units by connecting them with water pipes. The heat exchanger is located in the outdoor unit, which reduces the risk of refrigerant leaks in the room. THERMA V R32 Hydrosplit IWT (with integrated hot water tank) is a device for hot water supply, space heating and cooling. In this solution, the internal hot water tank is conveniently connected to a separate outdoor unit. On the other hand, Hydrosplit in the Hydrobox version is a solution for heating and cooling rooms with high flexibility in installation thanks to the possibility of mounting on the wall. TECHNICAL CHARACTERISTICS The Therma V Hydrosplit (Hydrobox & IWT) series is a generation of LG heat pumps for heating, cooling and domestic hot water (DHW). Pumps of this type are characterized by high heating performance even at low temperatures, a wide operating range and a reduced noise level. Features of the devices High energy efficiency (SCOP 4.60 / A +++) Wide operating range (ambient temperature: -25 ~ 35 ° C / water side: 15 ~ 65 ° C) Built-in hydraulic components in the indoor unit: water pump, expansion vessel, vent, etc.) Hot water tank (200 L) - IWT Buffer tank (40 L) and expansion tank for hot water (8 L) available as an option. Built-in water flow and pressure sensors for real-time monitoring of water height and water level Advanced water pump control (optimal flow, constant flow, constant flow, constant T) Improved control logic for the second circuit High performance refrigerant R32 R1 Scroll compressor Black Fin anti-corrosion coating LG ThinQTM KEYMARK / MCS / Eurovent certification

    Read more

    €9.524,19

  • Last stock! LG Wärmepumpe Therma V Monobloc S R32 12kW 3-phasig HM123MR - NeueEnergie24

    LG heat pump Therma V Monobloc S R32 12kW 3-phase HM123MR

    Air-water heat pump Therma V Monoblock S R32 HM123MR.U34 - 3 phases - 12.0 kW Therma V Monoblock S series is the second generation of LG monoblocks for R32. The symbol S ("silence / supreme") means that the monoblock of this series is characterized by a low noise level and the best performance of the Therma V series. LG monoblock units do not require refrigerant lines. These units are installed outdoors and connected to the building's plumbing via water pipes. The plate heat exchanger, the water pump and the expansion tank are housed in the housing of the monoblock heat pump. This means that the device can be installed quickly and easily, even in systems that are already in operation. TECHNICAL CHARACTERISTICS The Therma V Monobloc S R32 series is a generation of low-noise heat pumps from LG that are designed for for heating, cooling and domestic hot water (DHW). Pumps of this type have been designed using the "all-in-one" concept, which means that no work is required related to the installation of the refrigerant. The easy installation goes hand in hand with the universal character of the device and the high seasonal energy efficiency, which leads to numerous applications of the offered heat pump in residential buildings as well as in selected utility facilities. Features of the device High energy efficiency (SCOP 4.67 / A +++) Excellent performance at low ambient temperatures (100%; -15°C) Wide operating range (ambient temperature: -25 ~ 35 ° C / water side: 15 ~ 65 ° C) Low noise, 32 to 35 dB (A) (sound pressure, quiet operation) R32 high performance refrigerant R1 Scroll compressor Black Fin anti-corrosion coating LG ThinQTM KEYMARK / MCS / Eurovent certification

    Read more

    €5.998,46

  • Last stock! KAISAI Monoblock-Wärmepumpe 12kW KHC-12RY3 - NeueEnergie24 KAISAI Monoblock-Wärmepumpe 12kW KHC-12RY3 - NeueEnergie24

    KAISAI monoblock heat pump 12kW KHC-12RY3

    The KAISAI monoblock heat pump KHC-08RY3 is a state-of-the-art and efficient heating and cooling system designed for use in residential and commercial properties. With an output of 8 kW, this heat pump offers an optimal balance between performance and energy efficiency. It offers six operating modes - heating, cooling, domestic hot water, heating + domestic hot water, cooling + domestic hot water and an AUTO mode that automatically switches between heating and cooling to ensure year-round comfort. The compact design integrates a complete hydraulic module that includes essential components for central heating operation such as a circulation pump, a diaphragm tank, a safety valve, a vent valve and a flow sensor as standard. The ability to operate two heating circuits increases the versatility of the system. A heated drip tray prevents ice formation and water damage at low temperatures. To increase user-friendliness, the heat pump can be operated via a wireless Wi-Fi network or the included wired control. Compatibility with glycol solutions expands the pump's application possibilities, especially in colder climates. In addition, the anti-corrosion coating on the fins ensures a longer service life and reliability of the system. Powerful 8 kW capacity: Efficient heating and cooling performance for residential and commercial spaces. 6 operating modes: Flexible options including heating, cooling, domestic hot water and combined modes. Modbus RTU protocol: Easy integration into building automation systems for improved control. Compact design: Includes a complete hydraulic module for central heating operation. Operation of 2 heating circuits: Increased versatility and adaptability. Heated drip tray: Prevents icing and improves efficiency in cold environments. Auxiliary electric heater: Additional heat source for extremely cold conditions. WiFi and wired control: User-friendly operation and monitoring. Glycol solution compatibility: Suitable for various heating systems. Anti-corrosion coating: Durability and reliability by protecting the slats.

    Read more

    €6.058,43

  • Last stock! KAISAI Monoblock-Wärmepumpe 10kW KHC-10RY3 - NeueEnergie24 KAISAI Monoblock-Wärmepumpe 10kW KHC-10RY3 - NeueEnergie24

    KAISAI monoblock heat pump 10kW KHC-10RY3

    The KAISAI monoblock heat pump KHC-08RY3 is a state-of-the-art and efficient heating and cooling system designed for use in residential and commercial properties. With an output of 8 kW, this heat pump offers an optimal balance between performance and energy efficiency. It offers six operating modes - heating, cooling, domestic hot water, heating + domestic hot water, cooling + domestic hot water and an AUTO mode that automatically switches between heating and cooling to ensure year-round comfort. The compact design integrates a complete hydraulic module that includes essential components for central heating operation such as a circulation pump, a diaphragm tank, a safety valve, a vent valve and a flow sensor as standard. The ability to operate two heating circuits increases the versatility of the system. A heated drip tray prevents ice formation and water damage at low temperatures. To increase user-friendliness, the heat pump can be operated via a wireless Wi-Fi network or the included wired control. Compatibility with glycol solutions expands the pump's application possibilities, especially in colder climates. In addition, the anti-corrosion coating on the fins ensures a longer service life and reliability of the system. Powerful 8 kW capacity: Efficient heating and cooling performance for residential and commercial spaces. 6 operating modes: Flexible options including heating, cooling, domestic hot water and combined modes. Modbus RTU protocol: Easy integration into building automation systems for improved control. Compact design: Includes a complete hydraulic module for central heating operation. Operation of 2 heating circuits: Increased versatility and adaptability. Heated drip tray: Prevents icing and improves efficiency in cold environments. Auxiliary electric heater: Additional heat source for extremely cold conditions. WiFi and wired control: User-friendly operation and monitoring. Glycol solution compatibility: Suitable for various heating systems. Anti-corrosion coating: Durability and reliability by protecting the slats.

    Read more

    €4.567,60

  • Last stock! KAISAI Monoblock-Wärmepumpe 8kW KHC-08RY3 - NeueEnergie24 KAISAI Monoblock-Wärmepumpe 8kW KHC-08RY3 - NeueEnergie24

    KAISAI monoblock heat pump 8kW KHC-08RY3

    The KAISAI monoblock heat pump KHC-08RY3 is a state-of-the-art and efficient heating and cooling system designed for use in residential and commercial properties. With an output of 8 kW, this heat pump offers an optimal balance between performance and energy efficiency. It offers six operating modes - heating, cooling, domestic hot water, heating + domestic hot water, cooling + domestic hot water and an AUTO mode that automatically switches between heating and cooling to ensure year-round comfort. The compact design integrates a complete hydraulic module that includes essential components for central heating operation such as a circulation pump, a diaphragm tank, a safety valve, a vent valve and a flow sensor as standard. The ability to operate two heating circuits increases the versatility of the system. A heated drip tray prevents ice formation and water damage at low temperatures. To increase user-friendliness, the heat pump can be operated via a wireless Wi-Fi network or the included wired control. Compatibility with glycol solutions expands the pump's application possibilities, especially in colder climates. In addition, the anti-corrosion coating on the fins ensures a longer service life and reliability of the system. Powerful 8 kW capacity: Efficient heating and cooling performance for residential and commercial spaces. 6 operating modes: Flexible options including heating, cooling, domestic hot water and combined modes. Modbus RTU protocol: Easy integration into building automation systems for improved control. Compact design: Includes a complete hydraulic module for central heating operation. Operation of 2 heating circuits: Increased versatility and adaptability. Heated drip tray: Prevents icing and improves efficiency in cold environments. Auxiliary electric heater: Additional heat source for extremely cold conditions. WiFi and wired control: User-friendly operation and monitoring. Glycol solution compatibility: Suitable for various heating systems. Anti-corrosion coating: Durability and reliability by protecting the slats.

    Read more

    €4.319,13

  • Last stock! HYUNDAI Monoblock-Wärmepumpe 16kW HHPM-M16TH3PH - NeueEnergie24 HYUNDAI Monoblock-Wärmepumpe 16kW HHPM-M16TH3PH - NeueEnergie24

    HYUNDAI monoblock heat pump 16kW HHPM-M16TH3PH

    The Hyundai Monoblok heat pump is a model with a fully integrated refrigeration system and hydraulic module. The installation of the heat pump does not require any refrigerant connections, and the innovative double door design allows for quick maintenance of the pump, while the modern control system ensures access to monitor system operation and change settings. Features of the device : Built-in hydraulic module Cooling system integrated into the device Energy efficient DC inverter compressors (MITSUBISHI) High efficiency and wide operating range Water heating even at -25°C Environmentally friendly refrigerant R32 Easy installation and maintenance of the pump BMS gateway, Modbus communication WiFi control and remote control Built-in electric heater Standard wired controller Built-in temperature sensor in the control unit Selection of operating modes: heating, cooling, hot water Function settings: Auto mode, disinfection mode, Holiday mode, domestic hot water priority mode, ECO mode, Silent mode Brushless DC fan motor Quiet operation of the heat pump unit 24-hour on/off programming Weekly timer

    Read more

    €5.865,65

  • Last stock! HYUNDAI Monoblock-Wärmepumpe 14kW HHPM-M14TH3PH - NeueEnergie24 HYUNDAI Monoblock-Wärmepumpe 14kW HHPM-M14TH3PH - NeueEnergie24

    HYUNDAI monoblock heat pump 14kW HHPM-M14TH3PH

    The Hyundai Monoblok heat pump is a model with a fully integrated refrigeration system and hydraulic module. The installation of the heat pump does not require any refrigerant connections, and the innovative double door design allows for quick maintenance of the pump, while the modern control system ensures access to monitor system operation and change settings. Features of the device: Built-in hydraulic module Cooling system integrated into the device Energy efficient DC inverter compressors (MITSUBISHI) High efficiency and wide operating range Water heating even at -25°C Environmentally friendly refrigerant R32 Easy installation and maintenance of the pump BMS gateway, Modbus communication WiFi control and remote control Built-in electric heater Standard wired controller Built-in temperature sensor in the control unit Selection of operating modes: heating, cooling, hot water Function settings: Auto mode, disinfection mode, Holiday mode, domestic hot water priority mode, ECO mode, quiet mode Brushless DC fan motor Quiet operation of the heat pump unit 24-hour on/off programming Weekly timer

    Read more

    €5.684,30

  • Last stock! HYUNDAI Monoblock-Wärmepumpe 12kW HHPM-M12TH3PH - NeueEnergie24 HYUNDAI Monoblock-Wärmepumpe 12kW HHPM-M12TH3PH - NeueEnergie24

    HYUNDAI monoblock heat pump 12kW HHPM-M12TH3PH

    The Hyundai Monoblok heat pump is a model with a fully integrated refrigeration system and hydraulic module. The installation of the heat pump does not require any refrigerant connections, and the innovative double door design allows for quick maintenance of the pump, while the modern control system ensures access to monitor system operation and change settings. Features of the device: Built-in hydraulic module Cooling system integrated into the device Energy efficient DC inverter compressors (MITSUBISHI) High efficiency and wide operating range Water heating even at -25°C Environmentally friendly refrigerant R32 Easy installation and maintenance of the pump BMS gateway, Modbus communication WiFi control and remote control Built-in electric heater Standard wired controller Built-in temperature sensor in the control unit Selection of operating modes: heating, cooling, hot water Function settings: Auto mode, disinfection mode, Holiday mode, domestic hot water priority mode, ECO mode, Silent mode Brushless DC fan motor Quiet operation of the heat pump unit 24-hour on/off programming Weekly timer

    Read more

    €5.207,34

  • Last stock! HYUNDAI Monoblock-Wärmepumpe 10kW HHPM-M10TH1PH - NeueEnergie24 HYUNDAI Monoblock-Wärmepumpe 10kW HHPM-M10TH1PH - NeueEnergie24

    HYUNDAI monoblock heat pump 10kW HHPM-M10TH1PH

    The Hyundai Monoblok heat pump is a model with a fully integrated refrigeration system and hydraulic module. The installation of the heat pump does not require any refrigerant connections, and the innovative double door design allows for quick maintenance of the pump, while the modern control system ensures access to monitor system operation and change settings. Features of the device: Built-in hydraulic module Cooling system integrated into the device Energy efficient DC inverter compressors (MITSUBISHI) High efficiency and wide operating range Water heating even at -25°C Environmentally friendly refrigerant R32 Easy installation and maintenance of the pump BMS gateway, Modbus communication WiFi control and remote control Built-in electric heater Standard wired controller Built-in temperature sensor in the control Selection of operating modes: heating, cooling, hot water Function settings: Auto mode, disinfection mode, Holiday mode, domestic hot water priority mode, ECO mode, Silent mode Brushless DC fan motor Quiet operation of the heat pump unit 24-hour on/off programming Weekly timer

    Read more

    €4.549,04

  • Last stock! SOLITANK Vertikaler Warmwasserspeicher Wärmetauscher 245L mit Rohrschlange 3.83m² - NeueEnergie24 SOLITANK Vertikaler Warmwasserspeicher Wärmetauscher 245L mit Rohrschlange 3.83m² - NeueEnergie24

    SOLITANK Vertical hot water tank heat exchanger 245L with pipe coil 3.83m²

    Solitank - Ideal for heat pumps The coil is the hot water consumer The storage tank is heated by the heat source The heat pump is connected to the storage tank In the Solitank boiler, 1 heat exchanger and 4 couplings are connected to the tank body. The domestic water is immediately heated by the upper heat exchanger. In the couplings connected to the The water can be heated by a heater (heat pump, boiler) and used for heating preheating via couplings connected to the tank body. (see Figure x) Solitank can save in 2 different versions at the same time, depending on the system requirements. It can be used be used as domestic water and buffer storage. The hot water stored in the tank is used both to support the heating system and to heat the domestic water. The heat exchanger in the boiler is made of chrome-nickel 316L stainless steel. Since the domestic water tank is heated, the growth of legionella and other bacteria is excluded. Several heat sources can be integrated into the Solitank boiler. Optionally, it can be operated with an electric heater. As a non-solar heat source, this is the most efficient model. It is perfectly compatible with heat pumps. Case for notes and maintenance.

    Read more

    €825,48

  • Last stock! SOLITANK Vertikaler Warmwasserspeicher Wärmetauscher 170L mit Rohrschlange 3.83m² - NeueEnergie24 SOLITANK Vertikaler Warmwasserspeicher Wärmetauscher 170L mit Rohrschlange 3.83m² - NeueEnergie24

    SOLITANK Vertical hot water tank heat exchanger 170L with pipe coil 3.83m²

    Solitank - Ideal for heat pumps The coil is the hot water consumer The storage tank is heated by the heat source The heat pump is connected to the storage tank In the Solitank boiler, 1 heat exchanger and 4 couplings are connected to the tank body. The domestic water is immediately heated by the upper heat exchanger. In the couplings connected to the The water can be heated by a heater (heat pump, boiler) and used for heating preheating via couplings connected to the tank body. (see Figure x) Solitank can save in 2 different versions at the same time, depending on the system requirements. It can be used be used as domestic water and buffer storage. The hot water stored in the tank is used both to support the heating system and to heat the domestic water. The heat exchanger in the boiler is made of chrome-nickel 316L stainless steel. Since the domestic water tank is heated, the growth of legionella and other bacteria is excluded. Several heat sources can be integrated into the Solitank boiler. Optionally, it can be operated with an electric heater. As a non-solar heat source, this is the most efficient model. It is perfectly compatible with heat pumps. Case for notes and maintenance.

    Read more

    €748,13

  • TRINNITY BW 50L Pufferspeicher (TRGPWBW050) - NeueEnergie24 TRINNITY BW 50L Pufferspeicher (TRGPWBW050) - NeueEnergie24

    TRINNITY BW 50L buffer tank (TRGPWBW050)

    TRINNITY BW buffer tanks are designed for collecting, storing and transporting excess heating water or other liquids approved for contact with steel, coming from various heat sources: central heating boilers, solar collectors, heat pumps, etc. Buffer tanks protect the central heating system. - They take over the difference between the thermal output of the boiler and the power delivered to the heating system. They are made of black sheet steel. The thermal insulation of the buffer tanks consists of a 25 mm thick layer of polystyrene foam. The thermal insulation is covered with a jacket made of thin sheet steel coated with powder paint, and the upper and lower covers are made of ABS plastic. The tanks are pressure devices suitable for operation in a vertical position with a maximum water pressure of 0.3 MPa (3 bar). Technical data: Nominal pressure - 3 Temperature - 80 ° C Thickness of insulation [mm] - 25mm Material - black sheet steel White color without coil

    Read more

    €426,35

  • Last stock! SOLIBUFFER Stehpufferspeicher 245L ohne Spule - NeueEnergie24 SOLIBUFFER Stehpufferspeicher 245L ohne Spule - NeueEnergie24

    SOLIBUFFER standing buffer tank 245L without coil

    Solibuffer from Solimpeks is a buffer or separation storage tank that is ideal for heat pumps. The buffer tank consists of a sheet metal casing that is completely filled with PU foam. The buffer is heated by the heat source The heat pump is connected to the buffer Four couplings are attached to the body of the Solibuffer tank. The service water is immediately from the upper heat exchanger. In the sockets connected to the tank body, the water can flow through (heat pump, boiler) and used for heating supply. It extends the service life of the heat pump by preventing continuous operation of the heat pump. It prevents heat loss from the room to be heated when the heat pump is in defrost mode. If you choose a non-solar heat source, this is the most efficient model. Several heat sources can be integrated into the Solibuffer boiler. Optionally, it can be operated with an electric heater. Thanks to its compact design, it is easy to install. Anode rod and maintenance free.

    Read more

    €564,04

  • Last stock! SOLIBUFFER Stehpufferspeicher 170L ohne Spule - NeueEnergie24 SOLIBUFFER Stehpufferspeicher 170L ohne Spule - NeueEnergie24

    SOLIBUFFER standing buffer tank 170L without coil

    Solibuffer from Solimpeks is a buffer or separation storage tank that is ideal for heat pumps. The buffer tank consists of a sheet metal casing that is completely filled with PU foam. The buffer is heated by the heat source The heat pump is connected to the buffer Four couplings are attached to the body of the Solibuffer tank. The service water is immediately from the upper heat exchanger. In the sockets connected to the tank body, the water can flow through (heat pump, boiler) and used for heating supply. It extends the service life of the heat pump by preventing continuous operation of the heat pump. It prevents heat loss from the room to be heated when the heat pump is in defrost mode. If you choose a non-solar heat source, this is the most efficient model. Several heat sources can be integrated into the Solibuffer boiler. Optionally, it can be operated with an electric heater. Thanks to its compact design, it is easy to install. Anode rod and maintenance free.

    Read more

    €514,53

  • Last stock! SOLIBUFFER Stehpufferspeicher 132L ohne Spule - NeueEnergie24 SOLIBUFFER Stehpufferspeicher 132L ohne Spule - NeueEnergie24

    SOLIBUFFER standing buffer tank 132L without coil

    Solibuffer from Solimpeks is a buffer or separation storage tank that is ideal for heat pumps. The buffer tank consists of a sheet metal casing that is completely filled with PU foam. The buffer is heated by the heat source The heat pump is connected to the buffer Four couplings are attached to the body of the Solibuffer tank. The service water is immediately from the upper heat exchanger. In the sockets connected to the tank body, the water can flow through (heat pump, boiler) and used for heating supply. It extends the service life of the heat pump by preventing continuous operation of the heat pump. It prevents heat loss from the room to be heated when the heat pump is in defrost mode. If you choose a non-solar heat source, this is the most efficient model. Several heat sources can be integrated into the Solibuffer boiler. Optionally, it can be operated with an electric heater. Thanks to its compact design, it is easy to install. Anode rod and maintenance free.

    Read more

    €475,86

  • Smarte Steckdose Outdoor - NeueEnergie24 Smarte Steckdose Outdoor - NeueEnergie24

    Smart outdoor socket

    Experience the revolution of home automation with the NE24 Smart Outdoor WIFI socket, specially developed with IP44 protection for outdoor use and perfectly matched to GOOGLE HOME & AMAZON ALEXA! From the garden to the patio, control your electrical devices safely and efficiently, even under adverse weather conditions. As an innovative solar power meter, it allows you to monitor the energy flow of your solar systems in real time. Combine outdoor adventure with cutting-edge technology and make your home the epicenter of the smart home revolution.

    Read more

    €16,99

  • Smarte Steckdose Indoor - NeueEnergie24 Smarte Steckdose Indoor - NeueEnergie24

    View options

    Smart socket indoor

    Comprehensive compatibility: Our NE24 WIFI socket is designed to work seamlessly with leading smart home systems such as Alexa, Google Home, Smart Life and Tuya Smart, giving you central control for all your devices. Real-time energy monitoring: The socket's advanced technology allows you to monitor the power consumption of your devices in real time. This gives you valuable insight into how you can save energy and reduce your electricity bill. Maximum safety with child lock: Your family's safety comes first. That's why our socket has an integrated child safety lock, which prevents children from playing with the sockets and protects themselves from electric shocks. Sharing & Group Control for the whole family: One main account controls everything, but with just one click you can share access to the smart plug with your entire family. So everyone can enjoy the convenience and benefits of smart living without additional setup. Make your home smart with the NE24 WIFI socket that syncs seamlessly with GOOGLE HOME & AMAZON ALEXA! Control your devices from anywhere with just one click on your smartphone. Monitor energy consumption in real time and protect your loved ones with built-in parental controls. Share the fun of smart living with your family and experience the future of home automation!

    Read more

    €12,95

    View options

  • KAISAI FLY 7,0kW Split Wand-Klimagerät (KWX-18HRGO) - NeueEnergie24 KAISAI FLY 7,0kW Split Wand-Klimagerät (KWX-18HRGO) - NeueEnergie24

    KAISAI FLY 7.0kW split wall air conditioner (KWX-18HRGO)

    Product description KAISAI FLY The KAISAI FLY wall air conditioner in its new and improved version has been equipped with additional functions and a filter system. The device is equipped with a cold catalytic filter that effectively cleans the air of pollutants. The cleaning function is additionally supported by a Bio HEPA filter that retains up to 99% of dust particles and bacteria with a size of 0.3 μm and up to 95% of particles with a size of 0.1 to 0.3 μm, including fungi and viruses. The wall air conditioner with Bio HEPA filter also allows the air to be cleaned of fine dust, a carcinogenic component of smog. The KAISAI FLY wall-mounted air conditioner is distinguished by its ability to heat indoor spaces at outdoor temperatures down to -25°C. The standard built-in Wi-Fi module increases the convenience of controlling the air conditioner via a smartphone app, and the modern wireless remote control allows you to use 3 additional functions of the device: self-cleaning evaporator (SELF CLEAN), which facilitates cleaning of the device; constant heating 8°C (HEATING 8°C), which prevents the interior from cooling down when the residents are away; temperature sensor (FOLLOW ME), which adjusts the temperature to the user's location. The comfort of the device is also ensured by the 3D fan function, which allows optimal air circulation and even temperature distribution in the room. Operating modes: Auto, cooling, heating, ventilation Powerful fan drive Features Operating modes: Automatic, cooling, heating, ventilation High efficiency motor driven fan DCInnovative heat exchanger design High SEER / SCOPAir volume regulation via remote control Timer: On and Off Cold catalytic filters Bio HEPANawiew 3D filter Nominal cooling capacity: 7.0kW Nominal heating output: 7.3 DC inverter technology Maximum length of the cooling system: 20-50 m Maximum height of the cooling system: 10-25 m Coolant: R32 Energy class: A++/ A+ Recommended operating temperature for cooling operation: -15 ~ 50°C Recommended operating temperature for heating operation: -25 ~ 30°C

    Read more

    €1.099,00

  • KAISAI FLY 5,3 kW Split Wand-Klimagerät KWX-18HRG18HRGO - NeueEnergie24 KAISAI FLY 5,3 kW Split Wand-Klimagerät KWX-18HRG18HRGO - NeueEnergie24

    KAISAI FLY 5.3 kW split wall air conditioner KWX-18HRG18HRGO

    Product description KAISAI FLY The KAISAI FLY wall air conditioner in its new and improved version has been equipped with additional functions and a filter system. The device is equipped with a cold catalytic filter that effectively cleans the air of pollutants. The cleaning function is additionally supported by a Bio HEPA filter that retains up to 99% of dust particles and bacteria with a size of 0.3 μm and up to 95% of particles with a size of 0.1 to 0.3 μm, including fungi and viruses. The wall air conditioner with Bio HEPA filter also allows the air to be cleaned of fine dust, a carcinogenic component of smog. The KAISAI FLY wall-mounted air conditioner is distinguished by its ability to heat indoor spaces at outdoor temperatures down to -25°C. The standard built-in Wi-Fi module increases the convenience of controlling the air conditioner via a smartphone app, and the modern wireless remote control allows you to use 3 additional functions of the device: self-cleaning evaporator (SELF CLEAN), which facilitates cleaning of the device; constant heating 8°C (HEATING 8°C), which prevents the interior from cooling down when the residents are away; temperature sensor (FOLLOW ME), which adjusts the temperature to the user's location. The comfort of the device is also ensured by the 3D fan function, which allows optimal air circulation and even temperature distribution in the room. Operating modes: Auto, cooling, heating, ventilation Powerful fan drive Features Operating modes: Automatic, cooling, heating, ventilation High efficiency motor driven fan DCInnovative heat exchanger design High SEER / SCOPAir volume regulation via remote control Timer: On and Off Cold catalytic filters Bio HEPANawiew 3D filter Nominal cooling capacity: 5.3kW Nominal heating output: 5.6 DC inverter technology Maximum length of the cooling system: 20-50 m Maximum height of the cooling system: 10-25 m Coolant: R32 Energy class: A++/ A+ Recommended operating temperature for cooling operation: -15 ~ 50°C Recommended operating temperature for heating operation: -25 ~ 30°C

    Read more

    €892,00

  • KAISAI FLY 3,5kW Split Wand-Klimagerät KWX-12HRGIHRGO - NeueEnergie24 KAISAI FLY 3,5kW Split Wand-Klimagerät KWX-12HRGIHRGO - NeueEnergie24

    KAISAI FLY 3.5kW split wall air conditioner KWX-12HRGIHRGO

    Product description KAISAI FLY The KAISAI FLY wall air conditioner in its new and improved version has been equipped with additional functions and a filter system. The device is equipped with a cold catalytic filter that effectively cleans the air of pollutants. The cleaning function is additionally supported by a Bio HEPA filter that retains up to 99% of dust particles and bacteria with a size of 0.3 μm and up to 95% of particles with a size of 0.1 to 0.3 μm, including fungi and viruses. The wall air conditioner with Bio HEPA filter also allows the air to be cleaned of fine dust, a carcinogenic component of smog. The KAISAI FLY wall-mounted air conditioner is distinguished by its ability to heat indoor spaces at outdoor temperatures down to -25°C. The standard built-in Wi-Fi module increases the convenience of controlling the air conditioner via a smartphone app, and the modern wireless remote control allows you to use 3 additional functions of the device: self-cleaning evaporator (SELF CLEAN), which facilitates cleaning of the device; constant heating 8°C (HEATING 8°C), which prevents the interior from cooling down when the residents are away; temperature sensor (FOLLOW ME), which adjusts the temperature to the user's location. The comfort of the device is also ensured by the 3D fan function, which allows optimal air circulation and even temperature distribution in the room. Operating modes: Auto, cooling, heating, ventilation Powerful fan drive Features Operating modes: Automatic, cooling, heating, ventilation High efficiency motor driven fan DCInnovative heat exchanger design High SEER / SCOPAir volume regulation via remote control Timer: On and Off Cold catalytic filters Bio HEPANawiew 3D filter Nominal cooling capacity: 3.5kW Nominal heating output: 3.8 DC inverter technology Maximum length of the cooling system: 20-50 m Maximum height of the cooling system: 10-25 m Coolant: R32 Energy class: A++/ A+ Recommended operating temperature for cooling operation: -15 ~ 50°C Recommended operating temperature for heating operation: -25 ~ 30°C

    Read more

    €599,00

  • KAISAI FLY 2.6kW Split Wand-Klimagerät KWX-09HRGO09HRGI - NeueEnergie24 KAISAI FLY 2.6kW Split Wand-Klimagerät KWX-09HRGO09HRGI - NeueEnergie24

    KAISAI FLY 2.6kW split wall air conditioner KWX-09HRGO09HRGI

    Product description KAISAI FLY The KAISAI FLY wall air conditioner in its new and improved version has been equipped with additional functions and a filter system. The device is equipped with a cold catalytic filter that effectively cleans the air of pollutants. The cleaning function is additionally supported by a Bio HEPA filter that retains up to 99% of dust particles and bacteria with a size of 0.3 μm and up to 95% of particles with a size of 0.1 to 0.3 μm, including fungi and viruses. The wall air conditioner with Bio HEPA filter also allows the air to be cleaned of fine dust, a carcinogenic component of smog. The KAISAI FLY wall-mounted air conditioner is distinguished by its ability to heat indoor spaces at outdoor temperatures down to -25°C. The standard built-in Wi-Fi module increases the convenience of controlling the air conditioner via a smartphone app, and the modern wireless remote control allows you to use 3 additional functions of the device: self-cleaning evaporator (SELF CLEAN), which facilitates cleaning of the device; constant heating 8°C (HEATING 8°C), which prevents the interior from cooling down when the residents are away; temperature sensor (FOLLOW ME), which adjusts the temperature to the user's location. The comfort of the device is also ensured by the 3D fan function, which allows optimal air circulation and even temperature distribution in the room. Features Operating modes: Auto, cooling, heating, ventilation Powerful fan drive Features Operating modes: Automatic, cooling, heating, ventilation Highly efficient motor-driven fan DCInnovative heat exchanger design High SEER / SCOPAir volume regulation via remote control Timer: On and Off Cold catalytic filters Bio HEPANawiew 3D filter Nominal cooling capacity: 2.6kW Nominal heating output: 2.9 DC inverter technology Maximum length of the cooling system: 20-50 m Maximum height of the cooling system: 10-25 m Coolant: R32 Energy class: A++/ A+ Recommended operating temperature for cooling operation: -15 ~ 50°C Recommended operating temperature for heating operation: -25 ~ 30°C

    Read more

    €564,98

  • HYUNDAI Split Wandklimagerät 3.6kW CARBON GREY HRP-M12CGI + HRP-M12CGO - NeueEnergie24 HYUNDAI Split Wandklimagerät 3.6kW CARBON GREY HRP-M12CGI + HRP-M12CGO - NeueEnergie24

    HYUNDAI Split wall air conditioner 3.6kW CARBON GRAY HRP-M12CGI + HRP-M12CGO

    Wall air conditioner 3.6kW CARBON GREY HYUNDAI CARBON GREY - The most advanced climate features, heating at temperatures down to -25°C and all this in a modern carbon fiber style casing that suits many types of interiors and allows you to easily customize your room decor. CHARACTERISTICS: Equipped with additional silver ion and catalytic + activated carbon filters WiFi remote control (standard) ARCTIC KIT heating set Ionization of air Silent operation 20dB(A) and QUIET mode MULTI SPLIT compatible device High capacity air filter +8°C temperature maintenance

    Read more

    €799,99

  • HYUNDAI Split Wandklimagerät 2.6kW CARBON GREY HRP-M09CGI + HRP-M09CGO - NeueEnergie24 HYUNDAI Split Wandklimagerät 2.6kW CARBON GREY HRP-M09CGI + HRP-M09CGO - NeueEnergie24

    HYUNDAI Split wall air conditioner 2.6kW CARBON GRAY HRP-M09CGI + HRP-M09CGO

    Wall air conditioner 2.6kW CARBON GREY HYUNDAI CARBON GREY - The most advanced climate features, heating at temperatures down to -25°C and all this in a modern carbon fiber style casing that suits many types of interiors and allows you to easily customize your room decor. CHARACTERISTICS: Equipped with additional silver ion and catalytic + activated carbon filters WiFi remote control (standard) ARCTIC KIT heating set Ionization of air Silent operation 20dB(A) and QUIET mode MULTI SPLIT compatible device High volume air filters +8'C temperature maintenance

    Read more

    €684,98

You have seen 24 out of 31 products

Show more products

Footer image

© 2024 NeueEnergie24, Powered by Shopify

    • American Express
    • Apple Pay
    • Google Pay
    • Klarna
    • Maestro
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account