TRINNITY BW buffer tanks are designed for collecting, storing and transporting excess heating water or other liquids approved for contact with steel, coming from various heat sources: central heating boilers, solar collectors, heat pumps, etc. Buffer tanks protect the central heating system. - They take over the difference between the thermal output of the boiler and the power delivered to the heating system. They are made of black sheet steel. The thermal insulation of the buffer tanks consists of a 25 mm thick layer of polystyrene foam. The thermal insulation is covered with a jacket made of thin sheet steel coated with powder paint, and the upper and lower covers are made of ABS plastic. The tanks are pressure devices suitable for operation in a vertical position with a maximum water pressure of 0.3 MPa (3 bar).
Technical data:
Nominal pressure - 3
Temperature - 80 ° C
Thickness of insulation [mm] - 25mm
Material - black sheet steel
White color
without coil
Solibuffer from Solimpeks is a buffer or separation storage tank that is ideal for heat pumps.
The buffer tank consists of a sheet metal casing that is completely filled with PU foam.
The buffer is heated by the heat source
The heat pump is connected to the buffer
Four couplings are attached to the body of the Solibuffer tank. The service water is immediately
from the upper heat exchanger. In the sockets connected to the tank body, the water can flow through
(heat pump, boiler) and used for heating supply.
It extends the service life of the heat pump by preventing continuous operation of the heat pump.
It prevents heat loss from the room to be heated when the heat pump is in defrost mode.
If you choose a non-solar heat source, this is the most efficient model.
Several heat sources can be integrated into the Solibuffer boiler.
Optionally, it can be operated with an electric heater.
Thanks to its compact design, it is easy to install.
Anode rod and maintenance free.
Solibuffer from Solimpeks is a buffer or separation storage tank that is ideal for heat pumps.
The buffer tank consists of a sheet metal casing that is completely filled with PU foam.
The buffer is heated by the heat source
The heat pump is connected to the buffer
Four couplings are attached to the body of the Solibuffer tank. The service water is immediately
from the upper heat exchanger. In the sockets connected to the tank body, the water can flow through
(heat pump, boiler) and used for heating supply.
It extends the service life of the heat pump by preventing continuous operation of the heat pump.
It prevents heat loss from the room to be heated when the heat pump is in defrost mode.
If you choose a non-solar heat source, this is the most efficient model.
Several heat sources can be integrated into the Solibuffer boiler.
Optionally, it can be operated with an electric heater.
Thanks to its compact design, it is easy to install.
Anode rod and maintenance free.
Solibuffer from Solimpeks is a buffer or separation storage tank that is ideal for heat pumps.
The buffer tank consists of a sheet metal casing that is completely filled with PU foam.
The buffer is heated by the heat source
The heat pump is connected to the buffer
Four couplings are attached to the body of the Solibuffer tank. The service water is immediately
from the upper heat exchanger. In the sockets connected to the tank body, the water can flow through
(heat pump, boiler) and used for heating supply.
It extends the service life of the heat pump by preventing continuous operation of the heat pump.
It prevents heat loss from the room to be heated when the heat pump is in defrost mode.
If you choose a non-solar heat source, this is the most efficient model.
Several heat sources can be integrated into the Solibuffer boiler.
Optionally, it can be operated with an electric heater.
Thanks to its compact design, it is easy to install.
Anode rod and maintenance free.
