Discover the everHome EcoTracker - Your key to intelligent and efficient energy management!
How does it work everHome EcoTracker?
The everHome EcoTracker revolutionizes your energy management through its simple and ingenious functionality:
Read out the data easy:The EcoTracker is attached directly to the digital electricity meter. Thanks to his innovative magnetic bracket, it sits precisely on the optical interface of your counter and reads energy consumption and feed-in values in real time.
Transfer via WLAN:The data recorded is directly into the free via a stable 2.4 GHz WLAN connection everHome-App transmitted. Regardless of whether you are on the road or comfortably on the couch - you always have your energy consumption in view.
Transparency for your electricity consumption:In the app you can clearly see how much electricity you are about how much energy your PV system feeds on and which devices use a lot of electricity. This enables you to identify targeted savings potential and reduce costs.
Easy integration into your smart home:The EcoTracker is compatible with over 130 digital current meters and can be seamlessly with Shelly devices connect. So you can z. B. switch off devices automatically if your PV yield is low or optimize your heat pump.
Ideal for balcony power plants & PV systems:The EcoTracker Provides detailed data for the feed-in of your mini power plant and shows how much electricity you use from your PV system. Perfect to maximize the efficiency of your solar system.
Highlights:
Real-time monitoring: Keep your electricity consumption in view at any time and immediately identify energy guzzlers.
Simple installation: Thanks to magnetic attachment and plug-& play design, the EcoTracker ready for use in no time.
Free app: Manage your consumption data conveniently via the free everHome-App for iOS and Android -without monthly fees.
Compatibility: Supports over 130 digital electricity meters and enables the integration of up to 10 shelly devices for a comprehensive smart home experience.
Measure energy feed: Ideal for monitoring balcony power plants or roof PV systems.
Compatible with over 120 electricity meters from the following selection: https: //everhome.Cloud/DE/compatible-Geraete-Fuer-Den-ecotracker
Compatible with over 90 Electricity meter from the following selection: https: //everhome.Cloud/EN/Compatible-Devices-for-theecotracker
Scope of delivery:
1x EcoTracker
1x USB-C power supply with 2m cable
Make your home smarter and save energy with that everHome EcoTracker!
The Shelly Pro 3EM is a precise 3-phase power consumption meter that is simply connected via WLAN, LAN or Bluetooth. With an impressive measurement accuracy of 1%, it monitors the energy consumption of all of your household and work equipment individually, which enables you to control and optimize this data for up to 60 days, with detailed measured values being delivered every minute. In contrast to the Shelly 3EM, the Pro has an intelligent scripting function, has extended data and control functions and an improved firmware platform. Furthermore, the electricity meter can calculate the flow of energy in both directions - produced and consumed energy for each of the 3 phases. It also shows you the quality of your power grid by providing values for real power, blind power, tension and performance factor.
The highlights of the Pro 3EM
WLAN, LAN and Bluetoth
Two-way energy consumption monitoring
Scripting function
4-quadrant measurement (energy loss acquisition)
To 1% precise measurement
Modbus support
Electricity monitoring and control
Accuracy class B (work energy)
Internal temperature sensor
4 converter inputs
Including 3x current converter 120a
Assembly: DIN rail
Two-way energy consumption monitoring
The Pro 3EM helps you to avoid unnecessary expenses and voltage waste that could damage your devices. It calculates both the produced and the energy used for each of the three phases and can monitor three separate circuits in a single -phase system. In addition, it shows you the quality of your power grid. Including acting, blind power, voltage and performance factor. So you have an overview and effectively protects your technology.
Intelligent control for your home
With the scripting functionalities and web hooks of the electricity meter, you can easily control other Shelly or WLAN devices in your local network. Use these functions to set precise settings for heating, cooling or loading your electric car based on your PV production. Your devices are automatically separated from electricity consumption and smarter manages - without a cloud connection. This is how you reduce costs, save energy and effortlessly optimize your everyday life.
Industrial institution
The Shelly supports MODBUS for precisely recording tension, electricity, power and energy consumption. You will receive precise measured values and current values to optimally monitor your energy consumption. Thanks to the firmware platform, you can make individual adjustments and send all 100ms current data to your infrastructure. So you keep an overview and benefit from a smart energy control.
Solar panels and your system at a glance
With the electricity meter you can easily follow how much energy your solar modules generate. It provides you with real -time information in your system, as well as historical data to create and consumed energy. So you keep an eye on the energy flow and maximize the performance of your PV system.
First class security for your smart energy network
The Shelly offers security through MTLs for MQTT, HTTP and safe webockets. This means that you can connect directly and safely to your cloud infrastructure without having to set up expensive and complex networks or VPN`s. So your energy network not only becomes smarter, but also more secure and cost -efficient.
Full harmony and match
Shelly devices are compatible with Alexa, Google Home, Android and iOS. So you can easily control everything by voice command. To do this, download the Shelly Smart Control app in the App Store or Google Play.
Technical data
Voltage supply: 110-240V AC
Frequency: 50/60Hz
Ambient temperature: -20 ° C - +40 ° C
Air humidity: 30-70% relative humidity
Voltage meter (RMS for each phase): 100-260V
Electricity measuring devices (RMS via CT for each phase): 0-120a
Frequency band: 2.4 MHz
Max. HF performance:
WLAN protocol: Wi-Fi 802. 11 B/g/h
Electrical consumption:
WLAN reach inside: up to 30m
WLAN reach outside: up to 50m
Weight: 0.62 kg
Dimensions: 94 x 19 x 69 mm
Scope of delivery:
1x shelly per 3em smart 3 phases of electricity meter3x CT120 power converter
Presentation of the SungRow Single Phase Smart Energy Meter - an innovative and reliable solution for monitoring and managing your energy consumption. Developed for use in residential areas, the SungRow Single Phase Smart Energy Meter offers precise and real -time monitoring of your electricity consumption, which provides valuable knowledge in order to optimize your energy consumption and make well -founded decisions.
Equipped with advanced functions and a user -friendly user interface, this intelligent energy knife enables you to take control of your energy consumption. Thanks to the safe communication protocols and seamless integration options, the installation and compatibility with existing energy management systems is child's play.
Monitor, analyze and optimize your energy consumption with the SungRow Single Phase Smart Energy Meter - a reliable, intelligent and efficient solution for a greener and more sustainable future.
FI/LS switches (RCBOS) offer personal and material protection as well as protection against electrically ignited fires in accordance with DIN VDE 0100-410 and DIN VDE 0100-530. They ensure protection of three single-phase or three-phase current circles against overload and short-circuit currents, protection for sinus-shaped alternating currents and pulsating streams with a smooth proportion of the same error of up to 6 mA to earth. As well as error protection (protection for indirect touch), additional protection (with iδn ≤ 30 mA) and fire protection (with i∆n ≤ 300 mA). They meet the IEC/EN 61009-1 product standard (VDE 0664-20). Areas of application are household, commercial and industrial applications. The extensive range of accessories offers you everything you need for your installation tasks. Numerous approvals make the DS203NC fit for worldwide use.
Dimensioning capacity ICN = 6,000 A according to IEC/EN 61009-1 (VDE 0664-20) for RCDs (residual current protection devices) in residential construction and similar applications, ICU = 10 KA according to IEC/EN 60947-2 (VDE 0660-101) for MCBS (LS) in industrial applications.
RCBO DS203NC A Type A is 3-pole (LS), 4-pole switching and can be used in three-phase networks with or without N conductor.
AC meters for measuring single -phase networks via a direct connection for streams up to a maximum of 40 A. counter is calibrated according to IEC. Display of all important instrumental values. The electricity meter has an outcome. This can either be used as a pulse output for the output of the activity energy or as an alarm output. Up to 25 alarm values (threshold values with time delay) can be set here. The installation width is 1 DIN module. You can find suitable accessories such as electricity converters, gateways with integrated web server and a KNX interface in our portfolio.
The Victron Energy Ve.Bus BMS V2 (MPN: BMS300200200) is the next generation of VE.Bus BMS for Victron Lithium Smart Batteries (LFP-Smart) 12.8V and 25.6V. Each single cell of a Lifepo4 battery must be protected against overvoltage, undervoltage and over temperature. The Ve.Bus BMS V2 takes over exactly this task. The product is suitable for protecting 12V, 24V and 48V batterys and works in a operating voltage range of 9 - 70 VDC.
VE-BUS BMS V2 in interaction with Victtrons Lifepo4 Batteries
Victron LIFEPO4 batteries have a built-in cell compensation, temperature and voltage control (short brief designation: BTV) You will be connected to the VE.BUS BMS V2 via two M8 round connector cable sets. The BTVs of several batteries can be chained together. They can be switched in series, parallel and in a row and in parallel, which means that a battery range of 12V, 24V or 48V can be interpreted. Up to 20 batteries in one system are possible, which leads to an energy storage of max. 84KWH in a 12V system and 102kWh in a 24V and 48V system. For more details, please refer to the technical documents for our Lifepo4 battery.
Core tasks of the Victron Ve.Bus BMS V2
Specially developed for use with Victron Lithium Battery Smart 12.8 V & 25.6 V batteries.
Communicates directly with the lithium battery via the M8 circuit connecting cable of the battery
Switch off or separate from VE.Bus inverter or inverters/chargers via Ve.bus and other loads via the terminal "load", in the event of a cell subtle voltage
Switch off or separate from Ve.Bus inverter or inverters/chargers via Ve.bus, Ve.Direct and Ve.can solar charyer via a GX device and other chargers via the terminal "separate", in the case of a cell overvoltage, lower temperature or over temperature.
Difference to the Ve.Bus BMS
The VE.Bus BMS V2 was specially developed for use in systems with GX devices and is therefore perfect for eating or backup applications with a battery capacity of up to 84KWH (12V) or 102KWH (24V/48V).The BMS V2 also has a remote contact for remote control (on/off).
Communication with Ve.Bus products
Multiplus, Quattro or Phoenix inverters are connected to the "Multiplus/Quattro" connection with a standard RJ45 UTP cable.The BMS deactivates the inversion in the event of an undervoltage of the cell and loading in the event of overvoltage or over temperature of the cell
Communication with remote control devices
A GX device (e.g. Cerbo GX), a digital multi control (DMC) panel or a Ve.Bus Smart Dongle (including any combination) can be connected to the BMS via the "Remote control panel". This accessories can be used in combination with the BMS to controll the switching condition of the VE.Bus inverter or the inverter / charger (one / only / only charger)
Clamps for additional inputs and outputs
The BMS has a special power output (GX-Power) for a GX device and an additional power input (AUX-in) for an external DC source, e.g. B. a network adapter. In the event of a system shutdown, the GX device is further supplied with electricity to prevent a further unloading of the battery via the auxiliary voltage receipt or separated from the network
Technical data
Input voltage area: 9-70VDC
Electricity intake - regular operation: 10mA (load cutting current not enclosed)
GX-Pow output: 1A
Aux-in input: 1a
Ve.Bus interface: 2x RJ45 sockets for connection to all Ve.Bus products
Operating temperature range: -20 ° C - +50 ° C
Moisture: Max. 95% (not condensing)
Protection class: IP20
Weight: 120gr
Dimensions: 105.5 x 94.5 x 23.8 mm
Scope of delivery:
1x VICTRON Energy BMS300200200 VE.Bus BMS V2 Battery Management System1x operating instructions
The Multiplus-II 48/5000/70-50 is a high-end device combination of Victron Energy (MPN: PMP482505010) combines the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 100 A and the potential area of application extends to eating applications. The inverter module provides a whopping 5000 W or 4000 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, with which it can be switched back and forth between the AC connections.
Important performance features of the Multiplus-II 48/5000/70-50
PowerControl and Power Assist increase in network or generator performance
Built-in anti-Icelanding function and connection option for external electricity sensor (optional)
Can be used as a backup device in network -coupled systems for the power supply for network failures
Can be used in various ESS (Energy Storage System) applications
Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications
Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration
Practically unlimited performance through parallel and three-phase operation
Can be configured on site or from a distance using Veconfigure software*
Technical features
5000 W power with non -linear load 4000 W continuous load and 9000 W Top output
For 48 V battery voltage, 50 A transfer switch and 70 A battery charger
Output voltage: 230 VAC, frequency: 50 Hz
Max. Effect is 95%, protection class IP22
Always enough power thanks to PowerControl and Power Assist
A maximum network or generator current can be set on the Multiplus-II 48/5000/70-50. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries.
Solar power: alternating current also in the event of a network failure
The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters.
Maximum flexibility thanks to two alternating current outputs
The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output.
Many options for system expansion
The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel.
Configuration and monitoring remotely
Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed.
Scope of delivery:
1x Victron PMP482505010 Multiplus-II 48/5000/70-50a1x operating instructions
The Energy Meter EM24 from Victron Energy (MPN Rel200200100) is a three-phase energy counter with a maximum of 65a per phase. He uses Dim Dimer connection/counter box to measure the services on all three phases.
The energy meter can be used as:
Network meter and is used as a tax input for an ESS system
Measurement device for the performance of a PV inverter
Measurement device for the performance of an alternating current unit
For all uses mentioned above, the measuring device should be connected to the local network so that the GX device can achieve it.
Note on GX firmware versions
To support the Ethernet EM24 measuring devices, Venus 2.60 is the minimum firmware required on the GX device.
Scope of delivery:
1x Victron Energy Meter EM24 Rel200200100
The electricity meter Victron EM540 (MPN Rel200100100) is designed to monitor three-phase operating modes, for example PV inverter, ACoric unit or inverter. In this way you can measure the performance and energy of the entire system as a direct measurement in the distribution box. The Victron EM540 uses a higher sampling speed compared to the EM24. It is suitable as a supplement to an inverter/charger from Victron.
The device offers two options for connecting to a GX device:
Cable connection via RS485-to-USB interface with a cable length of 1.8m or 5m
Wireless connection via Zigbee-to-USB and Zigbee-to-RS485 converter
The article at a glance
Usable as a network meter and as a tax input for an eating system
Can be used to measure the performance of a PV inverter or an ACoric unit
Support of different types of energy counters
Use for displaying the data on a GX device
Technical data:
Manufacturer number number: Rel200100100
Display: LCD
Phases: suitable for 3 phases
Max. Nominal current: 65a per phase
Mass type: Direct/Shunt
Communication: RS485
Scope of delivery:
1x Victron Energy EM540 Energy Meter 3-Phasig (Rel200100100)
The solaredge 3-phase inline energy knife with Energy Net (article number MTR-240-3PC1-D-A-MW) offers real-time insights into your energy consumption, which helps to reduce your electricity costs and avoid unexpectedly high invoices.
This inline energy from Solaredge carries out extremely precise measurements of both imported and exported energy production and consumption. The MTR-240-3PC1-D-A-MW is specially designed for 1-phase network connections and supports direct connections up to 65a per phase.
The meter communicates wirelessly with all compatible devices via the Solaredge Energy Net and has optional RS485 support.
This model automatically recognizes solaredge inverter and can simply be monitored via Setapp. The energy knife fits into every standard meter cabinet and is delivered with a guarantee of 5 years.
Advantages of the Solaredge 3-phase inline energy knife
24/7 insights into the energy production and consumption profile
Integrated current converter for fast installation and lower labor costs
Communicates wirelessly with the inverter via the Solaredge home network
Offers an accuracy of ± 1% or ± 2%, depending on the network connection mode
Fits easily in standard meter cabinets
The SungRow three-phase smart energy was specially developed for SGX.XRT and SHX.XRT systems and offers a precise and reliable measurement of power consumption in three-phase power nets.
Equipped with advanced technology, the SungRow three-phase-smart-energy energy offers precise real-time monitoring and data recording. The high -quality display offers a clear insight into energy consumption so that users can keep an eye on their power consumption patterns.
Through seamless integration into SGX.XRT and SHX.XRT systems, this intelligent energy knife of SungRow enables efficient energy management and optimization. Users can pursue and analyze their energy consumption in order to make well -founded decisions to reduce costs and improve overall efficiency.
SungRow three-phase smart energy dtu 666 (5) (80a)
The three-phase smart energy from SungRow has a user-friendly user interface that enables simple navigation and configuration of the settings in accordance with specific requirements. It supports external access so that users can easily monitor and control their energy consumption via connected devices.
In addition, the three-phase smart energy from Sungrow is equipped with robust security measures that ensure the integrity of the data and protect against unauthorized access. It corresponds to industrial standards and offers a safe and reliable energy monitoring solution.
Experience the future of energy monitoring with the intelligent three -phase energy knife from SungRow. Take control of your energy consumption, optimize your energy consumption and go towards a sustainable and efficient future.
Please note that the functions and specifications of the SungRow three-phase smart energy can vary depending on the model and firmware version.
The solaredge 1-phase inline energy knife with Energy Net (article number MTR-240-3PC1-D-A-MW) offers real-time insights into your energy consumption, which helps to reduce your electricity costs and avoid unexpectedly high invoices.
This inline energy from Solaredge carries out extremely precise measurements of both imported and exported energy production and consumption. The MTR-240-3PC1-D-A-MW is specially designed for 1-phase network connections and supports direct connections up to 65a per phase.
The meter communicates wirelessly with all compatible devices via the Solaredge Energy Net and has optional RS485 support.
This model automatically recognizes solaredge inverter and can simply be monitored via Setapp. The energy knife fits into every standard meter cabinet and is delivered with a guarantee of 5 years.
Advantages of the solaredge 1-phase inline energy knife
24/7 insights into the energy production and consumption profile
Integrated current converter for fast installation and lower labor costs
Communicates wirelessly with the inverter via the Solaredge home network
Offers an accuracy of ± 1% or ± 2%, depending on the network connection mode
Fits easily in standard meter cabinets
The high-performance security automatic machines of the S800N series protect cables and lines from overload and short circuit. You have 36KA rated short -term discharge at 240/415V AC. It can also be used for tensions up to 400/690V AC and for DC voltages. With its thermal trigger mechanism, it offers equally effective protection against overload, as with its electromechanical trigger mechanism before short circuit. The S800N corresponds to the IEC/EN 60947-2 standard and enables the application for industrial purposes. Numerous licensing makes him fit for worldwide use and the extensive range of accessories makes the use even more comfortable. Due to the very fast arc extinguishing, your installation with the S800N is well secured.
The safety machines of the S 200 series protect cables and lines from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the building regulations DIN VDE 0641-11 or IEC/EN 60898-1, DIN VDE 0660-101 or IEC/EN60947-2 and UL1077. Your patented connection clamp ensures easy and safe contact and handling using a pressure plate. For better visibility in the wire, the connection opening for lines is above the connection opening for the phase rail. Ladder cross -sections up to 35 mm² can be connected directly to the device via the connection clamp with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous approvals make the S 200 fit for global use. Each device is subjected to quality and performance triple intensive tests before delivery.
The safety machines of the S 200 series protect cables and lines from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the building regulations DIN VDE 0641-11 or IEC/EN 60898-1, DIN VDE 0660-101 or IEC/EN60947-2 and UL1077. Your patented connection clamp ensures easy and safe contact and handling using a pressure plate. For better visibility in the wire, the connection opening for lines is above the connection opening for the phase rail. Ladder cross -sections up to 35 mm² can be connected directly to the device via the connection clamp with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous approvals make the S 200 fit for global use. Each device is subjected to quality and performance triple intensive tests before delivery.
The safety machines of the S 200 series protect cables and lines from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the building regulations DIN VDE 0641-11 or IEC/EN 60898-1, DIN VDE 0660-101 or IEC/EN60947-2 and UL1077. Your patented connection clamp ensures easy and safe contact and handling using a pressure plate. For better visibility in the wire, the connection opening for lines is above the connection opening for the phase rail. Ladder cross -sections up to 35 mm² can be connected directly to the device via the connection clamp with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous approvals make the S 200 fit for global use. Each device is subjected to quality and performance triple intensive tests before delivery.
The safety machines of the S 200 series protect cables and lines from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the building regulations DIN VDE 0641-11 or IEC/EN 60898-1, DIN VDE 0660-101 or IEC/EN60947-2 and UL1077. Your patented connection clamp ensures easy and safe contact and handling using a pressure plate. For better visibility in the wire, the connection opening for lines is above the connection opening for the phase rail. Ladder cross -sections up to 35 mm² can be connected directly to the device via the connection clamp with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous approvals make the S 200 fit for global use. Each device is subjected to quality and performance triple intensive tests before delivery.
The safety machines of the S 200 series protect cables and lines from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the building regulations DIN VDE 0641-11 or IEC/EN 60898-1, DIN VDE 0660-101 or IEC/EN60947-2 and UL1077. Your patented connection clamp ensures easy and safe contact and handling using a pressure plate. For better visibility in the wire, the connection opening for lines is above the connection opening for the phase rail. Ladder cross -sections up to 35 mm² can be connected directly to the device via the connection clamp with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous approvals make the S 200 fit for global use. Each device is subjected to quality and performance triple intensive tests before delivery.
