Kostal Kostal Smart Energy Meter G2
The KOSTAL Smart Energy Meter (KSEM) is an energy meter with a wide range of functions. Thanks to additional computing power in the device, it is technically prepared for future functions and tasks and offers the optimal solution for all KOSTAL inverters. A major advantage of the KSEM is the standard preconfiguration for the PLENTICORE plus, PIKO IQ and PIKO MP plus. This means that direct installation is possible without adjusting the parameters and other settings. KOSTAL Smart Energy Meter optimal energy use The KOSTAL Smart Energy Meter enables optimal energy use in the home. The energy meter performs a 3-phase energy measurement in real time. The measurement data is transmitted to the inverters via standard interfaces. The KSEM therefore supports the energy management of the KOSTAL inverters PLENTICORE plus, PLENTICORE BI, PIKO IQ and PIKO MP plus. In conjunction with a PIKO 4.2 - 20 or PIKO 36 EPC, the KOSTAL Smart Energy Meter is a replacement for the PIKO BA sensor. The inverters can be set up in the KOSTAL Smart Energy Meter with the aim of maximizing solar self-consumption and displaying self-consumption/house consumption in the solar portal. To do this, the KOSTAL Smart Energy Meter must be integrated into the KOSTAL solar portal.
€299,00
Kostal KOSTAL PLENTICOIN card EU without DE
The QR code on the PLENTICOIN card is used to retrieve activation codes for product extensions of KOSTAL inverters and wall boxes and can be used in the KOSTAL Solar webshop. This is a Single-purpose voucher.
€139,00
Kostal KOSTAL PLENTICOIN Card DE
The QR code on the PLENTICOIN card is used to retrieve activation codes for product extensions of KOSTAL inverters and wall boxes and can be used in the KOSTAL Solar webshop. This is a Single-purpose voucher.
€139,00
Kostal KOSTAL PLENTICORE L G3
The KOSTAL PLENTICORE G3 is a transformerless inverter with 3 MPP trackers. Can be used universally as a solar, hybrid or battery inverter with basic outputs AC 4.0 (S) / 8.5 (M) / 15.0 kW (L). The benefits can optionally be extended with 1 - 2x Plenticoin. The battery input can be subsequently implemented with 3x Plenticoon via the 3rd MPP tracker and thus enables the connection of a compatible HV storage unit. Prepared for additional battery charging via AC energy sources (e.g. for KOSTAL Doppelpower). Emergency power operation can be implemented with the manual switch KOSTAL BackUp Switch G3 (08-000747) or via the enwitec mains switching box KOSTAL 3P 35kW (08-000772/773). 4 digital outputs for load control or event reporting, SG-Ready compatible Free monitoring via KOSTAL Solar Portal and Solar App Direct integration of an overvoltage protection module is possible with the KOSTAL DC overvoltage protection module G3 (08-000746).
€2.099,00
Kostal KOSTAL PLENTICORE M G3
The KOSTAL PLENTICORE G3 is a transformerless inverter with 3 MPP trackers. Can be used universally as a solar, hybrid or battery inverter with basic outputs AC 4.0 (S) / 8.5 (M) / 15.0 kW (L). The benefits can optionally be extended with 1 - 2x Plenticoin. The battery input can be subsequently implemented with 3x Plenticoon via the 3rd MPP tracker and thus enables the connection of a compatible HV storage unit. Prepared for additional battery charging via AC energy sources (e.g. for KOSTAL Doppelpower). Emergency power operation can be implemented with the manual switch KOSTAL BackUp Switch G3 (08-000747) or via the enwitec mains switching box KOSTAL 3P 35kW (08-000772/773). 4 digital outputs for load control or event reporting, SG-Ready compatible Free monitoring via KOSTAL Solar Portal and Solar App Direct integration of an overvoltage protection module is possible with the KOSTAL DC overvoltage protection module G3 (08-000746).
€1.649,00
Kostal KOSTAL PLENTICORE S G3
The KOSTAL PLENTICORE G3 is a transformerless inverter with 3 MPP trackers. Can be used universally as a solar, hybrid or battery inverter with basic outputs AC 4.0 (S) / 8.5 (M) / 15.0 kW (L). The benefits can optionally be extended with 1 - 2x Plenticoin. The battery input can be subsequently implemented with 3x Plenticoon via the 3rd MPP tracker and thus enables the connection of a compatible HV storage unit. Prepared for additional battery charging via AC energy sources (e.g. for KOSTAL Doppelpower). Emergency power operation can be implemented with the manual switch KOSTAL BackUp Switch G3 (08-000747) or via the enwitec mains switching box KOSTAL 3P 35kW (08-000772/773). 4 digital outputs for load control or event reporting, SG-Ready compatible Free monitoring via KOSTAL Solar Portal and Solar App Direct integration of an overvoltage protection module is possible with the KOSTAL DC overvoltage protection module G3 (08-000746).
€1.199,00
Kostal KOSTAL PIKO CI 100
The three-phase 100 kW inverter from KOSTAL has 16 DC inputs and 8 MPP trackers and an input current of 20 A per MPPT. DC installation is simple, cost-effective and possible without string collection boxes. The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strings and is reliable in use thanks to its integrated and certified grid service functions. We expect the necessary certificates for connection to the medium-voltage grid to be available in April 2024.
€5.289,00
Kostal KOSTAL PLENTICORE plus G2 10
The three-phase hybrid inverter is always the right choice thanks to its wide range of possible applications - whether for generating electricity with up to 3 MPP trackers or for additional storage of self-generated energy via an optionally switchable battery input. The PLENTICORE plus can be used as a replacement device, when building a new system or in combination with an energy generation system. The second generation offers a new communication board for easy connection via Wi-Fi, SG-Ready interfaces for your heat pump and an additional RJ45 connection for other components. Please note: A PLENTICOIN is required to use the battery function.
€1.768,00
Kostal KOSTAL PLENTICORE plus G2 8.5
The three-phase hybrid inverter is always the right choice thanks to its wide range of possible applications - whether for generating electricity with up to 3 MPP trackers or for additional storage of self-generated energy via an optionally switchable battery input. The PLENTICORE plus can be used as a replacement device, when building a new system or in combination with an energy generation system. The second generation offers a new communication board for easy connection via Wi-Fi, SG-Ready interfaces for your heat pump and an additional RJ45 connection for other components. Please note: A PLENTICOIN is required to use the battery function.
€1.631,00
Kostal KOSTAL PLENTICORE plus G2 7.0
The three-phase hybrid inverter is always the right choice thanks to its wide range of possible applications - whether for generating electricity with up to 3 MPP trackers or for additional storage of self-generated energy via an optionally switchable battery input. The PLENTICORE plus can be used as a replacement device, when building a new system or in combination with an energy generation system. The second generation offers a new communication board for easy connection via Wi-Fi, SG-Ready interfaces for your heat pump and an additional RJ45 connection for other components. Please note: A PLENTICOIN is required to use the battery function.
€1.479,00
Kostal KOSTAL PLENTICORE plus G2 5.5
The three-phase hybrid inverter is always the right choice thanks to its wide range of possible applications - whether for generating electricity with up to 3 MPP trackers or for additional storage of self-generated energy via an optionally switchable battery input. The PLENTICORE plus can be used as a replacement device, when building a new system or in combination with an energy generation system. The second generation offers a new communication board for easy connection via Wi-Fi, SG-Ready interfaces for your heat pump and an additional RJ45 connection for other components. Please note: A PLENTICOIN is required to use the battery function.
€1.375,00
Kostal KOSTAL PLENTICORE plus G2 4.2
The three-phase hybrid inverter is always the right choice thanks to its wide range of possible applications - whether for generating electricity with up to 3 MPP trackers or for additional storage of self-generated energy via an optionally switchable battery input. The PLENTICORE plus can be used as a replacement device, when building a new system or in combination with an energy generation system. The second generation offers a new communication board for easy connection via Wi-Fi, SG-Ready interfaces for your heat pump and an additional RJ45 connection for other components. Please note: A PLENTICOIN is required to use the battery function.
€1.231,00
Kostal KOSTAL PLENTICORE plus G2 3.0
The three-phase hybrid inverter is always the right choice thanks to its wide range of possible applications - whether for generating electricity with up to 3 MPP trackers or for additional storage of self-generated energy via an optionally switchable battery input. The PLENTICORE plus can be used as a replacement device, when building a new system or in combination with an energy generation system. The second generation offers a new communication board for easy connection via Wi-Fi, SG-Ready interfaces for your heat pump and an additional RJ45 connection for other components. Please note: A PLENTICOIN is required to use the battery function.
€1.185,00
Kostal KOSTAL PLENTICORE BI G2 10/26
The three-phase AC battery inverter Plenticore BI G2 from KOSTAL is equipped with a display, network and control interfaces and data logger. The new integrated WiFi enables easy wireless control. By connecting a wide range of battery storage sizes, it is flexibly scalable and offers the greatest possible adaptability in system planning. It achieves optimal yields even in shading situations. It provides both private and commercial systems with optimized self-consumption values through peak shaving. The option of integrating a high-voltage battery and the integrated, intelligent battery control means that conversion losses are minimal. The self-learning software anticipates the load profiles of the end users and compares these with the yields of the photovoltaic system. This results in an optimized battery charge so that the excess energy can almost always be stored.
€2.355,00
Kostal KOSTAL PLENTICORE BI G2 5.5/26
The three-phase AC battery inverter Plenticore BI G2 from KOSTAL is equipped with a display, network and control interfaces and data logger. The new integrated WiFi enables easy wireless control. By connecting a wide range of battery storage sizes, it is flexibly scalable and offers the greatest possible adaptability in system planning. It achieves optimal yields even in shading situations. It provides both private and commercial systems with optimized self-consumption values through peak shaving. The option of integrating a high-voltage battery and the integrated, intelligent battery control means that conversion losses are minimal. The self-learning software anticipates the load curves of the end users and compares them with the yields of the photovoltaic system. This results in an optimized battery charge so that the excess energy can almost always be stored.
€1.683,00
Kostal KOSTAL PIKO CI 30 (HC)
The three-phase 30 - 60kW commercial inverter from KOSTAL The integrated KOSTAL Smart AC Switch replaces the external coupling switch. DC installation is simple, cost-effective and possible without string collection boxes. The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strings and is reliable in use thanks to its integrated and certified grid service functions. There is a free choice of monitoring due to compatibility with many park controllers and data loggers.
€2.592,00
Kostal KOSTAL PIKO CI 60 (HC)
The three-phase 30 - 60kW commercial inverter from KOSTAL The integrated KOSTAL Smart AC Switch replaces the external coupling switch. DC installation is simple, cost-effective and possible without string collection boxes. The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strings and is reliable in use thanks to its integrated and certified grid service functions. There is a free choice of monitoring due to compatibility with many park controllers and data loggers.
€3.630,00
Kostal KOSTAL PIKO CI 50 (HC)
The three-phase 30 - 60kW commercial inverter from KOSTAL The integrated KOSTAL Smart AC Switch replaces the external coupling switch. DC installation is simple, cost-effective and possible without string collection boxes. The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strings and is reliable in use thanks to its integrated and certified grid service functions. There is a free choice of monitoring due to compatibility with many park controllers and data loggers.
€3.444,00
Kostal KOSTAL PIKO MP plus 4.6-2
The transformerless 2 MPP inverter from KOSTAL has a maximum apparent power of 4.6 kVA. The PIKO MP plus inverter can be used either as a pure PV inverter or as a hybrid inverter. As a hybrid inverter, the PV system is connected to one MPP and the high-voltage battery is connected to the other MPP.
€1.122,00
Kostal KOSTAL PIKO MP plus 3.6-2
The transformerless 2 MPP inverter from KOSTAL has a maximum apparent power of 4.6 kVA. The PIKO MP plus inverter can be used either as a pure PV inverter or as a hybrid inverter. As a hybrid inverter, the PV system is connected to one MPP and the high-voltage battery is connected to the other MPP.
€991,00
Kostal KOSTAL PIKO MP plus 3.0-2
The transformerless 2 MPP inverter from KOSTAL has a maximum apparent power of 4.6 kVA. The PIKO MP plus inverter can be used either as a pure PV inverter or as a hybrid inverter. As a hybrid inverter, the PV system is connected to one MPP and the high-voltage battery is connected to the other MPP.
€914,00
Kostal KOSTAL PLENTICORE plus G2 10
The KOSTAL PLENTICORE plus G2 10 is the latest generation of the popular hybrid inverter from KOSTAL, which ensures maximum flexibility and efficiency in the use of solar energy. With an output of 10 kW, this inverter is the ideal solution for medium to large solar systems in residential and commercial buildings. Main features: Hybrid technology : The PLENTICORE plus G2 10 can be used both as a pure PV inverter and in combination with a battery storage system, which enables optimal use of the solar energy generated. High efficiency : With a maximum efficiency of over 98%, the inverter ensures optimal conversion of solar energy into usable electricity, thereby maximizing your energy yields. Three MPP trackers : The three independent MPP trackers ensure flexible and optimal alignment of the solar modules, even with different roof slopes and shading. Easy installation and configuration : Thanks to the intuitive user interface and the KOSTAL Solar app, installing and commissioning the inverter is particularly quick and easy. Durability and reliability : The PLENTICORE plus G2 10 is robust and durable, designed for a long service life and minimal maintenance costs. Safety functions : Extensive safety features such as surge protection, residual current monitoring and automatic shutdown in the event of an emergency ensure safe operation of your solar system. Compatibility : The inverter is compatible with various battery systems and can be easily integrated into existing PV systems. Intelligent control : With the integrated energy management function, you can intelligently control the energy flow in your household and thus maximize your own consumption. Technical data: Rated power : 10 kW Maximum efficiency : >98% Number of MPP trackers : 3 Battery Compatibility : Yes Communication interfaces : Ethernet, WLAN, RS485 Protection class : IP65
€1.768,75
Kostal KOSTAL activation code Smart Energy Meter
The activation code for the KOSTAL Smart Energy Meter is used to activate the battery function in conjunction with the PIKO MP plus. After you have received the activation code, please set up the inverter and battery as described in the KOSTAL Smart Energy Meter manual.
€398,00
Kostal Kostal EV Wallbox ENCTOR AC 3.7/11
The design of the ENECTOR wallbox is simple and elegant, reflecting its function. The compact design enables space-saving installation. The robust housing allows safe use indoors and outdoors. An LED display on the front of the housing provides quick and clear information about all important status messages and shows the charging process. The KOSTAL wallbox's features are also impressive: the 7.5-meter-long charging cable included in the scope of delivery leaves enough room to charge the electric vehicle within easy reach. The Type 2 charging plug for the vehicle connection is matched to the charging point in the common Mode 3. The ENECTOR delivers 3.7 kW or 11 kW in one to three phases, with a current of up to 16 amps per phase. Whether with or without a solar system: the KOSTAL wallbox charges your electric car from all available energy sources. Battery-friendly and fast charging is what matters, and that is precisely one of the great strengths of the KOSTAL wallbox. In conjunction with the KOSTAL Smart Energy Meter, optional convenience functions are also available. In power mode, ENECTOR focuses on fast charging with the maximum available power. Lock mode blocks the charging function from unwanted use. The two solar charging modes "Solar Pure Mode" and "Solar Plus Mode" are particularly efficient in their effect. In Solar Pure Mode, charging is carried out exclusively with self-produced solar power. Only as much can be charged as is currently available. In Solar Plus Mode, the charging power is adjusted to minimize the use of grid power. This can take into account whether the energy from a connected battery storage system is used or not.
€696,00