My-PV My-PV AC Elwa 2
Our AC ELWA 2 is a 0 - 3.5 kW continuously regulated hot water preparation device for mesh -coupled photovoltaic systems. The AC ELWA 2 uses excess photovoltaic energy for its hot water preparation and thus optimizes the self-consumption of the existing PV system. At the same time, self -sufficiency is increased - this protects against incalculable or increasing operating costs. Due to the stepless regulation, the PV feed-on power is exhausted to zero.The AC ELWA 2 has our proven optional hot water safety: Even if the sun does not seem sufficient, the hot water can be brought to the desired temperature from the public power grid. The device can be installed in hot water and buffer stores.Advantages of AC ELWA 2: More power: 3.5 kW instead of 3.0 kW The simplest assembly: The heating element and the control unit can be attached one after the other. Easy operation thanks to the display as with AC • Thor Multiple communication options: In addition to Ethernet RJ45, WLAN, RS485, PWM-in, potential switching output also External temperature sensor included An external 3 kW heating element can be connected Even more compact design than in the predecessor Fixed wiring no cable with a Schukostecker Simple conversion of the AC ELWA-E on AC Elwa 2
€771,00
My-PV My-PV AC Thor 9S
Hot water preparation and building heating with solar power AC • Thor 9S is a 0 - 9 kW continuously regulated photovoltaic power manager for hot water, electrical heat sources and optional heating. Simple & efficient: The AC • Thor 9S controls up to 3 electrical heat sources depending on the availability of PV energy and heat requirements. And that for both hot water and room heating. It ensures your personal living comfort fully automatically. In a residential building that is built or renovated according to the current standard, the AC • Thor 9S replaces the conventional, water -based building technology. Missing residual energy can be obtained from the public power grid. Of course, the AC • Thor 9S can also be integrated into conventional, water -guided systems such as buffer storage. His flexibility leaves nothing to be desired. Thanks to the built-in touch display, it is operated at any time without additional devices. The AC • Thor 9S is particularly suitable for: Single and multi-family houses Agricultural businesses Commercial and industrial applications Hotels and tourism companies Near and district heating networks Advantages Stepless up to 9 kW possible 3 controllable outputs For 3 phases of heating rods with a common zero-conductor The simplest loading of three zones 3 x 3 kW Also combinable with heat pump Two-zone room heating possible Disruption of the building services room System open for various inverter, battery systems and smart home Up to 85 % PV self -consumption/self -use even without battery storage Plug & Play - All connections plug -in! No time -consuming wiring No clamping points, no PG screw connections No cumbersome opening of a housing Technical data Network voltage: 3 x 230 V, 50 Hz Outputs: 0-3000 W continuously regulated, three outputs, max. 9000W Network connection: 3-phase with zeros Consumer connections: plug -in contacts Display: Color Grafik, Touch Screen 2.83 " Dimensions (W x H x D): 135 x 195 x 65 mm
€907,00
My-PV My-PV AC Thor EnergieManager 3 kW
Hot water preparation and building heating with solar power AC • Thor is a 0 - 3 kW continuously regulated photovoltaic power manager for hot water, electrical heat sources and optional heating. Simple & efficient: the AC • Thor controls electrical heat source depending on the availability of PV energy and heat requirements. And that for both hot water and room heating. It ensures your personal living comfort fully automatically. In a residential building that is built or renovated according to the current standard, the AC • Thor replaces conventional, water -guided building technology. Missing residual energy can be obtained from the public power grid. Of course, the AC • Thor can also be integrated into conventional, water -guided systems such as buffer storage. His flexibility leaves nothing to be desired. Thanks to the built-in touch display, it can be operated at any time without additional devices. And easy to install. Advantages 30% cost savings compared to conventional systems through self -generated energy Without maintenance through cables instead of pipes Disruption of the building services room System open for various inverter, battery systems and smart home Enables affordable living also in housing construction Up to 85 % PV self -consumption/self -use even without battery storage Technical data Network voltage: 230 V, 50 Hz Outputs: 0-3000 W continuously regulated + switching output 16 a Network connection: single-phase, protective contact connector Consumer connection: protection contact socket for ohmic loads Display: Color Grafik, Touch Screen 2.83 " Connection cable: 2.8 m Dimensions (W x H x D): 135 x 210 x 65 mm
€725,00
My-PV My-PV Digital measuring device P1 interface for AC-Thor/AC-Thor9s
The P1 digital meter interface is only planned to connect the PV performance managers AC • Thor and AC • Thor 9S via the Modbus RTU gateway to the P1 digital counter and thus be able to evaluate information about excess performance of the photovoltaic system without additional points. Any other use can damage the P1 digital meter interface. Before commissioning, read the assembly instructions of the AC • Thor and the operating manual available online carefully. Connect the RJ12 connector of the interface on the right socket of the electric meter P1. Connect the Modbus RTU gateway of the AC • Thor via a shielded three-wire cable (length: max. 1000 m) to the clamp block of the interface. Connect points A and B on the AC • Thor side of the cable to the supplied 120 ω resistance.
€60,00
My-PV My-PV Sciences 3KW bodies
The simplest way to more self -consumption/self -use. The screw radiator 3 KW was developed in particular for the application with the photovoltaic power manager AC • Thor and the screw radiator 9 kW for use with the photovoltaic power manager AC • Thor 9S. The screw radiators can be installed in fresh water and buffer stores. Due to their special execution, there are only very low thermal surface loads on the heating elements, which contributes directly to the increase in the product life. Steplessly controllable by photovoltaic power manager AC • Thor or AC • Thor 9SThe desired hot water temperature can be set with a rotary button. The AC • Thor or AC • Thor 9S recognizes the shutdown and automatically goes into standby mode for minimal self-consumption. A non -regulations are of course integrated. In some projects, however, higher temperatures are desired, for example if a buffer tank is to be loaded to over 90 ° C. The screw -up radiators are also available without a thermostat, only with a safety temperature limiter. To end the heating process, the temperature sensor that is included in the AC • Thor 9S must be used in any case. Advantages With manually adjustable target temperature (bimetal thermostat) 1.5 inch standard thread Single -phase or three -phase Optionally also without a thermostat, only with safety temperature limiter Technical data 3KW Heating power: 0 - 3,000 W Network connection: single-phase, protective contact connector, 230 V, 50 Hz Protection class: IP45 Connection cable: 2.8 m Dimensions (W x H x D): 88 x 88 x 518 mm
€169,00
My-PV My-PV Sciage radiator 9kW
The simplest way to more self -consumption/self -use. The screw radiator 3 KW was developed in particular for the application with the photovoltaic power manager AC • Thor and the screw radiator 9 kW for use with the photovoltaic power manager AC • Thor 9S. The screw radiators can be installed in fresh water and buffer stores. Due to their special execution, there are only very low thermal surface loads on the heating elements, which contributes directly to the increase in the product life. Steplessly controllable by photovoltaic power manager AC • Thor or AC • Thor 9SThe desired hot water temperature can be set with a rotary button. The AC • Thor or AC • Thor 9S recognizes the shutdown and automatically goes into standby mode for minimal self-consumption. A non -regulations are of course integrated. In some projects, however, higher temperatures are desired, for example if a buffer tank is to be loaded to over 90 ° C. The screw -up radiators are also available without a thermostat, only with a safety temperature limiter. To end the heating process, the temperature sensor that is included in the AC • Thor 9S must be used in any case. Advantages With manually adjustable target temperature (bimetal thermostat) 1.5 inch standard thread Single -phase or three -phase Optionally also without a thermostat, only with safety temperature limiter Technical data 9kW Heating power: 0 - 9,000 W Network connection: Dreephasig, 3x230 V 50Hz Protection class: IP45 Connection cable: 2.8 m Dimensions (W x H x D): 88 x 88 x 873 mm
€306,00
My-PV My-PV intake radiators 1.5
The simplest way to more self -consumption/self -use. The screw radiator 3 KW was developed in particular for the application with the photovoltaic power manager AC • Thor and the screw radiator 9 kW for use with the photovoltaic power manager AC • Thor 9S. The screw radiators can be installed in fresh water and buffer stores. Due to their special execution, there are only very low thermal surface loads on the heating elements, which contributes directly to the increase in the product life. Steplessly controllable by photovoltaic power manager AC • Thor or AC • Thor 9SThe desired hot water temperature can be set with a rotary button. The AC • Thor or AC • Thor 9S recognizes the shutdown and automatically goes into standby mode for minimal self-consumption. A non -regulations are of course integrated. In some projects, however, higher temperatures are desired, for example if a buffer tank is to be loaded to over 90 ° C. The screw -up radiators are also available without a thermostat, only with a safety temperature limiter. To end the heating process, the temperature sensor that is included in the AC • Thor 9S must be used in any case. Advantages With manually adjustable target temperature (bimetal thermostat) 1.5 inch standard thread Single -phase or three -phase Optionally also without a thermostat, only with safety temperature limiter Technical data 3KW Heating power: 0 - 3,000 W Network connection: single-phase, protective contact connector, 230 V, 50 Hz Protection class: IP45 Connection cable: 2.8 m Dimensions (W x H x D): 88 x 88 x 518 mm
€244,00
My-PV My-PV intake radiators 1.5
The simplest way to more self -consumption/self -use. The screw radiator 3 KW was developed in particular for the application with the photovoltaic power manager AC • Thor and the screw radiator 9 kW for use with the photovoltaic power manager AC • Thor 9S. The screw radiators can be installed in fresh water and buffer stores. Due to their special execution, there are only very low thermal surface loads on the heating elements, which contributes directly to the increase in the product life. Steplessly controllable by photovoltaic power manager AC • Thor or AC • Thor 9SThe desired hot water temperature can be set with a rotary button. The AC • Thor or AC • Thor 9S recognizes the shutdown and automatically goes into standby mode for minimal self-consumption. A non -regulations are of course integrated. In some projects, however, higher temperatures are desired, for example if a buffer tank is to be loaded to over 90 ° C. The screw -up radiators are also available without a thermostat, only with a safety temperature limiter. To end the heating process, the temperature sensor that is included in the AC • Thor 9S must be used in any case. Advantages With manually adjustable target temperature (bimetal thermostat) 1.5 inch standard thread Single -phase or three -phase Optionally also without a thermostat, only with safety temperature limiter Technical data 9kW Heating power: 0 - 9,000 W Network connection: Dreephasig, 3x230 V 50Hz Protection class: IP45 Connection cable: 2.8 m Dimensions (W x H x D): 88 x 88 x 873 mm
€406,00
My-PV My-PV ELWA / PV hot water device, nominal output DC 2KW
Elwa is a 2KW photovoltaic hot water preparation device. DC from photovoltaic modules is transferred directly into the built-in heating elevator and converted directly into heat directly into heat. The built -in MPP Tracker ensures that the PV generator is always operated in the optimal workload (similar to a PV inverter). No connection to the power grid is required for operation, since the device is supplied by the PV generator (pure island operation). With a rotary button, the desired hot water temperature is set, LED displays provide information about the current device status.
€647,00
My-PV My-PV Elwa Modbus interface for Elwa
The Elwa Modbus Interface acts as a link to a modbus bus system. Due to the bus ability, it is necessary to assign bus addresses when operating several devices. The Elwa Modbus Interface can be used for all ELWA devices with the firmware version 1.30 or higher. Devices with serial numbers less than 120100160810xxxx are equipped with previous firmware versions.
€112,00
My-PV My-PV terminals for electricity meters 100a
Max. Wire diameter 23 mm, 51 x 41 x 65 mm (W x H x L)
€136,00
My-PV My-PV terminals for electricity meters 200a
Max. Wire diameter 23 mm, 51 x 41 x 65 mm (W x H x L)
€163,00
My-PV My-PV terminals for electricity meters 400A
Max. Wire diameter 36 mm, 67 x 50 x 87 mm (W x H x L)
€204,00
My-PV My-PV terminals for electricity meters 600A
Max. Wire diameter 36 mm, 67 x 50 x 87 mm (W x H x L)
€244,00
My-PV My-PV temperature sensor AC-Thor
The AC • Thor can also take over the hot water preparation and ensure the desired water temperature. The my-PV temperature sensor is required for this. Three single -phase heating elements can be connected and each with their own temperature sensor. The scope of delivery of the AC • Thor always includes a temperature sensor, others may have to be acquired separately.
€37,00
My-PV My-PV USB interface for all Elwa / AC ELWA / PLA devices
The ELWA USB Interface is intended exclusively for operation with the electrical hot water preparation devices of the ELWA series. It establishes the connection between a Windows PC and the internal IR interface. For this purpose, a royalty -free “Virtual Com Port Driver” from FTDI® must be installed on the PC.
€112,00
My-PV My-PV WiFi Meter / Wi-Fi Energy meter including 3x brackets 75a
The My-PV WiFi meter maximizes the self-consumption of your PV system in the simplest way. The My-PV WiFi meter analyzes the electricity flows of the photovoltaic system. My-PV devices receive wireless information from the WiFi meter. As a result, only the energy generation that is currently available is used. There is therefore no feed-in into the power grid: the PV consumption is maximized, the public low voltage network is relieved. The My-PV WiFi meter is installed in the distribution cabinet immediately after the counter of the energy supplier and measures the load flow over three external folding current converters. The parameterization is easily possible via a web interface.
€256,00
SolarEdge Solaredge Home hot water regulator 3 kW
Maximize self -consumption by saving excess solar energy as hot water.
€458,00
SolarEdge Solaredge Home hot water regulator 5 kW
Maximize self -consumption by saving excess solar energy as hot water.
€514,00
