GoodWe
GoodWe is a manufacturer of inverters, storage and charging technology for photovoltaics. The collection brings together hybrid and string inverters, battery storage, wallboxes (EV chargers) and a carport system, for private and commercial projects alike.
-
GoodWe GoodWe HCA Series G2 11 kW 7.5m (WLAN/RFID)
The GoodWe HCA G2 11 kW is a smart wallbox with a 7.5 m cable for charging electric vehicles that works together with PV systems. It enables targeted use of solar energy or, if required, switching in of the grid. It is suitable for households with a PV system that want to charge at home. A Type 2 plug cable and RFID card are included in the scope of delivery.HighlightsSmart phase switching: Maximises the use of solar power, single-phase or three-phase operationCharging modes: PV priority, grid use or a combination as well as scheduled chargingCommunication: WLAN, RS485 and LAN with app integrationAccess control: RFID authentication, dynamic load managementProtection functions: Residual current, overvoltage and overcurrent protection, emergency stopOutdoor use: Robust IP66 housingTechnical specificationsDesignationValueCharging power11 kWGrid connection3-phaseProtection ratingIP66CableType 2, 7.5 mDimensionsL: 170 mm, W: 208 mm, H: 450 mmWeight5.6 kgCommunicationWLAN, RS485, LANScope of delivery1x GoodWe HCA G2 11 kW wallbox with 7.5 m cable1x RFID cardWho is it for?The wallbox is intended for electric vehicle owners who want to charge their vehicle at home with up to 11 kW while integrating PV power. The wallbox supports dynamic load management and several charging modes and can be integrated intelligently into various scenarios. The HCA G2 series is designed for single-phase or three-phase operation.Good to knowA wallbox should be installed by a qualified electrician.We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
-
GoodWe GoodWe SDT G3 GW25K-SDT-30
- 25 kW
- 3 MPPT
The GoodWe GW25K-SDT-30 is a three-phase string inverter of the SDT G3 series, designed for medium to larger residential or small-business PV systems. It allows over-specification (oversizing) of the PV output of up to 150% on the DC side and an AC overload of up to 110% in order to optimise yields at peak times. The inverter is equipped with three MPPT inputs, which supports flexible module configurations, and each MPPT input allows two strings. For safety, protection mechanisms such as integrated surge protection (Type II on AC and DC), insulation monitoring, reverse current monitoring and an optional arc fault detector (AFCI) are provided. The housing is classified to IP66, and the device is operated with active fan cooling. Communication and monitoring functions take place via RS485, WLAN or LAN, with optional 4G/Bluetooth extension.Three MPPT inputs with two strings each150% DC oversizing & 110% AC overload capabilityIntegrated surge protection (AC & DC) and optional AFCIThe GoodWe GW25K-SDT-30 is a powerful 25 kW three-phase string inverter with three MPPTs for optimising PV modules and high flexibility in string configurations. It offers modern protection functions, high efficiency and high design reserves for PV systems with peak load requirements.Scope of delivery: 1× GoodWe GW25K-SDT-30 inverter
-
GoodWe GoodWe ES G2 - GW5000-ES-20
- 5 kW
- 2 MPPT
The GoodWe ES G2 GW5000-ES-20 is a single-phase hybrid inverter with 5 kW rated power and integrated backup. It can be integrated into solar systems with battery storage and increases self-consumption through intelligent energy management. It is aimed at residential use.Highlights Backup function: Switchover to backup in less than 10 ms for a reliable emergency power function. Two MPPT inputs: Different module strings can be optimised efficiently. Low-voltage batteries: Compatible with low-voltage batteries (40–60 V), parallel operation possible to increase output. Protection functions: Overvoltage protection, insulation monitoring and optional AFCI protection. Weatherproof: Compact design with protection rating IP65. Technical specifications Designation Value AC rated power 5,000 W Phases Single-phase Max. PV input power 7,500 W Max. PV input voltage 600 V MPPT voltage range 60 – 550 V Max. input current per MPPT 16 A Battery connection Low voltage (40 – 60 V) Max. battery charge/discharge power 5,000 W / 5,300 W Max. efficiency 97.6% Protection rating IP65 Dimensions (W x H x D) 506 x 435 x 155 mm Weight 21.5 kg Scope of delivery1× GoodWe GW5000-ES-20 hybrid inverterWho is it for?The inverter is suitable for households with a single-phase connection that want to supplement their solar system with a low-voltage battery storage system. According to the description, the inverter integrates seamlessly into solar systems with battery storage.Good to knowThe system must be registered in the Marktstammdatenregister (German market master data register, MaStR); additional requirements apply depending on the grid operator. Installation should be carried out by a qualified electrician.We are happy to give you personal advice: phone +49 931 760 260 40 or e-mail kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
-
GoodWe GoodWe HCA Series G2 22 kW 7.5m (WLAN/RFID)
The GoodWe HCA G2 22 kW (with 7.5 m cable, WLAN / RFID control) is a three-phase AC EV charger that integrates seamlessly into PV storage systems and supports both PV-priority charging and grid charging. It uses dynamic phase switching to distribute solar power optimally and enables intelligent charging modes such as scheduling, surplus charging or combined operating mode (PV + grid) via the GoodWe SEMS+ app. RFID and app authentication are available for access control, ideal for rental, company or shared users. It is weatherproof (protection class IP66) for outdoor installation and can be used wall-mounted or pole-mounted. The network interfaces include WLAN, LAN, RS485, plus communication with the PV system for load control and dynamic balancing.Dynamic phase switching to maximise the share of solar powerRFID / app control for user access and cost billingWLAN, RS485 and LAN communication with PV integrationThe GoodWe HCA G2 22 kW charger is a PV-integrable, three-phase AC charger with RFID / app control and intelligent charging modes. It is weather-protected (IP66) and supports dynamic load balancing to optimise system efficiency.Scope of delivery: 1× GoodWe HCA G2 wallbox 22 kW, 1× permanently connected 7.5 m charging cable (Type 2), 1× RFID card set
-
GoodWe GoodWe ET G2 Series GW15K-ET-20
- 15 kW
- 3 MPPT
The GoodWe GW15K-ET-20 is a three-phase high-voltage hybrid inverter of the ET G2 series with 15000 W rated power. It connects photovoltaics, battery storage and the grid and offers a backup power function for selected consumers. The information is taken from the series data sheet and refers to this model.HighlightsBackup: Switchover to emergency power in under 10 ms; backup rated power 15000 VAHybrid: Connection of a high-voltage battery storage system with 150 ~ 720 VFlexible: 3 MPP trackers with one string each; up to 160% PV oversizingExpandable: Parallel connection of up to 4 devices possibleRobust: Protection rating IP66, cooling by natural convection, Type II surge protection (DC and AC)Technical specificationsDesignationValueAC rated power15000 WNumber of MPP trackers3Max. PV input power24000 WMax. charge/discharge power24000 W / 16500 WBackup rated power15000 VABackup peak without grid18000 VA (60 s)Max. efficiency98.2%Battery voltage range150 ~ 720 VMax. DC input voltage1000 VMPPT operating voltage range120 ~ 850 VMax. input current per MPPT16 AProtection ratingIP66Operating temperature-35 ~ +60 °CDimensions (W × H × D)496 × 460 × 221 mmWeight25 kgScope of delivery1x GoodWe GW15K-ET-20 hybrid inverterWho is it for?The GW15K-ET-20 is aimed at homeowners with a three-phase grid connection who want to plan or expand a PV system with high-voltage storage. Important for planning: the battery input works in the range of 150 ~ 720 V; the battery is not included in the scope of delivery. According to the data sheet, the unbalanced output (up to 150%) is only supported by the GW6K, GW8K and GW10K-ET-20 models, not by this model. We are happy to help you with the string design.Good to knowInstallation and grid connection should be carried out by a qualified electrician; registration obligations depend on the requirements of your grid operator.We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
-
GoodWe GoodWe Lynx Home D 10 kWh Battery Storage
- 10 kWh
- 10-year manufacturer warranty
The GoodWe Lynx Home D 10 kWh is a modular high-voltage storage system made up of two stackable Lynx D modules of 5 kWh each. It uses LiFePO₄ cells and can be installed in a floor-standing design or optionally wall-mounted. It is aimed at homeowners with a GoodWe hybrid inverter who want to use energy management and emergency power functions. According to the description, the cell chemistry ensures high thermal stability. According to the data sheet, the rated power is 3 kW per module, with 5 kW possible for short periods (10 s).HighlightsModular: Two 5 kWh modules, flexibly expandable and combinable, including older and new modules togetherPlug and play: Modules are wired to one anotherLiFePO₄: High thermal stability and long service lifeWeatherproof: Protection rating IP66, suitable for indoor and outdoor installationIntegration: Works with GoodWe hybrid inverters for energy management and emergency powerTechnical specificationsDesignationValueUsable capacity10000 WhRated power3 kW per module; peak power 5 kW (10 s)Cell chemistryLiFePO₄Module size5 kWh each (2 modules)Protection ratingIP66InstallationFloor-standing design or optionally wall mountingScope of delivery1x GoodWe Lynx Home D 10 kWh high-voltage battery systemVariant with floor mount: additionally 1x floor plateWho is it for?The system is suitable for residential systems with a GoodWe hybrid inverter that want an expandable home storage system. The modules are wired to one another and allow flexible expansion. The variant with floor mount includes the floor plate; the variant without floor mount is supplied without one.Good to knowDepending on the grid operator, storage systems should be properly registered, including in the Marktstammdatenregister (German market master data register, MaStR). Installation should be carried out by a qualified electrician.We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
from 2.844,75 €
incl. VAT
-
GoodWe GoodWe SMT Series GW80K-SMT
- 80 kW
- 6 MPPT
The GoodWe SMT series (e.g. GW80K-SMT) is a range of three-phase string inverters for commercial and industrial applications with high power density and six MPPTs. It supports DC input overvoltage of up to 150% (up to 180% depending on the model) and thus allows an oversizing design to increase yield. For safety, the device protects on both the DC and AC side with surge protection (Type II), supplemented by optional functions such as AFCI. The device is weatherproof according to protection class IP66 and suitable for outdoor mounting. Communication takes place via interfaces such as RS485, WiFi, LAN or 4G and offers options for remote monitoring and control via GoodWe platforms. The inverter is designed for high efficiency (up to 98.6%) and large PV modules (182/210 mm), which makes it attractive for modern large-scale systems.Six MPPTs for optimising several module stringsHigh efficiency of up to 98.6% with a robust protective design (IP66)DC input overvoltage (oversizing) of up to 150% / 180% (depending on model)The GoodWe GW80K-SMT is a powerful three-phase string inverter with high safety standards, high efficiency and flexible PV string configuration. It is designed specifically for commercial PV systems and supports oversizing as well as modern communication functions.Scope of delivery: 1x GoodWe GW80K-SMT inverter
from 2.805,00 €
incl. VAT
-
GoodWe GoodWe Vela Double Carport 1.2
The GoodWe Vela double solar carport with Polaris BIPV modules BMT-P2/132A covers two vehicles and generates solar power at the same time. The 15 glass-glass modules form the roof; interlocking frames drain the rainwater. The construction is designed as a modular complete package made of aluminium. All information is taken from the GoodWe BIPV data sheet (as of 20250123). Highlights Solar roof: 15 × Polaris 535 W, 8.025 kW in total Waterproof: Structurally waterproof BIPV modules without a roof membrane, with a gutter (without downpipe) Modular: Height-adjustable columns; installation without heavy machinery is intended Two parking spaces: Double carport with a length of 6500 mm and a width of 5200 mm Expandable: Optional motion-sensor light and surveillance camera according to the manufacturer Technical specifications Designation Value Carport output 8.025 kW Modules 15 × GoodWe Polaris BMT-P2/132A, 535 W Module efficiency 21.5% Cell type N-type TOPCon half-cell (132 pieces) Module dimensions 2142 × 1160 × 29.6 mm Module weight 30.1 ± 0.5 kg Carport length × width 6500 mm × 5200 mm Peak height 3000-3500 mm Clearance height 2000-2500 mm Vmpp / Impp 41.47 V / 12.90 A Voc / Isc 48.21 V / 13.60 A Warranty 12 years according to data sheet Scope of delivery Rafters, upper and lower columns, purlins Gutter (without downpipe) Column and rafter connectors, module clamps 15 × GoodWe Polaris BMT-P2/132A Who is it for? The carport is aimed at owners of residential buildings who want to combine a covered parking space for two vehicles with their own power generation, for example when roof space is lacking or unsuitable. Inverter, cabling and foundation are not described in the package and must be planned separately. Good to know A building permit, structural calculations and registration with the grid operator may be required for installation and grid connection; please clarify this before ordering. Installation and grid connection should be carried out by a qualified electrician; registration obligations depend on the requirements of your grid operator. We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
from 7.499,00 €
incl. VAT
-
GoodWe GoodWe Lynx Home D 5 kWh Battery Storage
- 5 kWh
- 10-year manufacturer warranty
The GoodWe Lynx D LX D5.0-10 is a modular high-voltage battery storage system with 5 kWh of usable energy for photovoltaic systems in residential buildings. Within the Lynx D series, the storage capacity can be expanded flexibly with additional modules to up to 40 kWh. The lithium iron phosphate cells used offer a reliable cell chemistry with high thermal and chemical stability. An integrated battery management system and a DC converter monitor and control the operation of the storage module. The system is designed for self-consumption optimisation and emergency power operation with compatible GoodWe hybrid inverters. The Lynx D series supports remote diagnostics and updates via the inverter and can restart automatically after an undervoltage fault.5 kWh of usable storage capacity with 3 kW rated powerModularly expandable to up to 40 kWh with a maximum of eight modulesSafe lithium iron phosphate cell technology and protection rating IP66The GoodWe Lynx D 5 kWh is a compact high-voltage storage system for self-consumption optimisation and compatible emergency power solutions. Thanks to the modular concept, the system can be expanded to suit energy requirements and can be floor-stacked or wall-mounted.Scope of delivery: 1x GoodWe Lynx D battery module LX D5.0-10,Floor plate variant: + 1x floor plate
from 1.449,99 €
incl. VAT
-
GoodWe GW6000-ES-20 G2
- 6 kW
- 2 MPPT
The GoodWe GW6000-ES-20 G2 is the most powerful model of the single-phase ES G2 series for photovoltaic systems with low-voltage battery storage. The series combines PV generation, battery storage and grid supply in a compact hybrid inverter and controls the energy flows according to demand. The model has two MPP trackers, handles up to 9,000 W PV input power and supports an input current of 16 A per MPPT. For battery systems, a voltage range of 40 to 60 V with up to 120 A charge and discharge current is available. In the event of a power outage, the backup output switches over in less than 10 ms and provides up to 6,000 VA. Integrated type II surge protection, passive cooling, protection rating IP65 and communication interfaces for monitoring and energy management complete the ES G2 series. 6,000 VA backup power with switchover in less than 10 ms 2 MPP trackers with 16 A input current per MPPT 40 to 60 V low-voltage battery connection with 120 A charge and discharge current The GoodWe GW6000-ES-20 G2 combines a powerful PV inverter with a direct interface for low-voltage battery storage. Thanks to the fast backup output, passive cooling and intelligent energy management, it is particularly suitable for residential photovoltaic systems. Scope of delivery: 1x GoodWe GW6000-ES-20 G2 hybrid inverter, 1x wall bracket, 1x Smart Dongle, 1x smart meter, connection terminals and mounting material, 1x product documentation
-
GoodWe GW5000-ES-20 G2
- 5 kW
- 2 MPPT
The GoodWe GW5000-ES-20 G2 is a single-phase low-voltage hybrid inverter of the ES G2 series for residential photovoltaic systems with battery storage. The series combines PV generation, grid operation, battery charging and backup supply in one compact device. With 5,000 W rated power and two independent MPP trackers, the model is suited to panel areas facing in different directions. The battery connection works with 48-V lithium-ion storage units in the voltage range of 40 to 60 V and supports up to 120 A charge and discharge current. In the event of a power outage, the ES G2 series switches to the backup output in less than 10 ms and continuously provides up to 5,000 VA for the GW5000-ES-20. Plug-and-play connections, passive cooling, protection rating IP65 and app monitoring make installation and operation easier. 5 kW hybrid power with two independent MPP trackers 48 V low-voltage battery connection with up to 120 A charge and discharge current Backup switchover in less than 10 ms with 5 kVA continuous power The GoodWe GW5000-ES-20 G2 combines a single-phase PV inverter, a powerful battery connection and a fast backup function. The model is suitable for residential solar systems in which self-consumption, energy storage and security of supply are to be combined. Scope of delivery: 1x GoodWe GW5000-ES-20 G2 hybrid inverter, 1x GoodWe GMK110 smart meter, 1x WiFi/LAN kit-20
-
GoodWe GW3000-ES-20 G2
- 3 kW
- 1 MPPT
The GoodWe GW3000-ES-20 G2 belongs to the ES G2 series and is a single-phase low-voltage hybrid inverter for residential photovoltaic and storage systems. With 3,000 W rated power, up to 4,500 W PV input power and one MPP tracker, it is suited to compact solar systems. The PV input handles up to 16 A and works in an MPPT voltage range of 60 to 550 V. For storage connection, the device supports lithium-ion batteries with 40 to 60 V battery voltage (no lead-acid batteries in the EU). In the event of a power outage, the ES G2 series can switch to the backup output in less than 10 ms and provides up to 3,000 VA of rated power for the GW3000-ES-20. Passive cooling, a noise level below 30 dB, protection rating IP65 as well as Wi-Fi and app monitoring enable quiet operation that can be monitored flexibly. 3 kW hybrid power with 1 MPP tracker and 16 A PV input current Backup switchover in less than 10 ms 40 to 60 V low-voltage storage connection with Wi-Fi and app monitoring The GW3000-ES-20 G2 combines 3 kW hybrid power, storage connection and fast backup operation in a compact housing. It is particularly suitable for single-phase PV systems in private homes where self-consumption, emergency power supply and digital monitoring are important. Scope of delivery: 1x GoodWe GW3000-ES-20 G2 hybrid inverter, 1x mounting plate, 3x expansion screws, 1x grounding terminal, 2x battery power terminals, 1x PV DC terminal, 1x Smart Dongle, 3x 2-pin communication terminals, 1x 3-pin communication terminal, 1x 6-pin communication terminal, 2x AC terminals, 1x battery terminal, 1x BMS and meter communication cable, 1x smart meter, 1x lead-acid battery temperature sensor cable, 1x slotted screwdriver, 2x adhesive pads, 1x
-
GoodWe GoodWe ESA Battery Module 5 kWh - GW5.1-BAT-D-G20
- 5 kWh
The GoodWe ESA Battery Module 5 kWh with item number GW5.1-BAT-D-G20 is a modular high-voltage battery storage unit for the GoodWe ESA system. The battery module is designed for three-phase ESA systems and uses LFP cells based on LiFePO4. Within the ESA series, the module can be combined flexibly with further 5 kWh and 8 kWh modules, which makes scalable storage concepts for residential buildings and smaller commercial applications possible. The usable energy is 5.0 kWh at a nominal energy of 5.12 kWh. The housing is protected to IP66 and can be stacked on the floor or mounted on the wall. Thanks to its modular design, the battery module is particularly suitable for expandable storage systems with a uniform GoodWe system architecture. 5.0 kWh of usable storage capacityModularly expandable within the GoodWe ESA systemLFP battery technology with IP66 protectionThe GoodWe ESA Battery Module 5 kWh is a compact high-voltage storage building block for the modular ESA overall system. It offers 5.0 kWh of usable energy, robust LFP cell chemistry and flexible expansion options for future-proof storage solutions. Scope of delivery: 1x GoodWe ESA Battery Module 5 kWh GW5.1-BAT-D-G20
from 1.459,00 €
incl. VAT
-
GoodWe GoodWe ESA Battery Module 8 kWh - GW8.3-BAT-D-G20
- 8 kWh
The GoodWe ESA Battery Module 8 kWh GW8.3-BAT-D-G20 is a high-voltage battery module for the modular GoodWe ESA series. It extends the GoodWe ESA series by 8.0 kWh of usable energy at 8.32 kWh of nominal energy. The module uses LFP LiFePO4 cell chemistry and is matched to a compact all-in-one storage solution. Within the ESA series, 5 and 8 kWh modules can be combined flexibly, and the series is designed for up to 12 modules depending on the configuration. The battery module communicates via CAN, achieves protection rating IP66 and is intended for floor stacking or wall mounting. Thanks to the optional heating (on G20 modules) and the approved temperature range down to minus 20 °C in discharge mode, the module is also suitable for demanding applications in the private and small commercial sector. 8.0 kWh of usable energy at 8.32 kWh of nominal energy.LFP LiFePO4 battery technology with CAN communication and IP66 protection.Modular storage expansion for the GoodWe ESA series with combinable 5 and 8 kWh modules. The GW8.3-BAT-D-G20 is the 8 kWh battery module of the GoodWe ESA series for scalable high-voltage storage systems. It combines robust battery technology, a compact design and flexible expandability for residential buildings and small commercial applications. Scope of delivery: 1x GoodWe ESA Battery Module 8 kWh GW8.3-BAT-D-G20
from 1.894,00 €
incl. VAT
-
GoodWe GoodWe ESA 29.999 kW - GW29.999K-ETA-G20
- 29.999 kW
- 4 MPPT
The GoodWe ESA 29.999 kW GW29.999K-ETA-G20 is the power module of the three-phase ESA series for compact all-in-one storage solutions in private and small commercial use. The series combines inverter, battery integration and intelligent energy management in a modular system that supports fast installation and commissioning. The model works with high-voltage LFP batteries of the ESA series and supports a scalable storage capacity of up to 108 kWh within the system. Four MPP trackers, up to 60 kW PV input power and up to 200% DC oversizing offer high flexibility in the design of demanding PV systems. The backup function with a switchover time of under 4 ms ensures security of supply, while AFCI, surge protection and IP66 increase system robustness. This makes the device particularly suitable for powerful three-phase storage and PV applications where high output, modular expandability and easy integration are required. 29.999 kW three-phase hybrid inverter for the GoodWe ESA system4 MPP trackers with up to 60 kW PV input power and up to 42 A per MPPTBackup switchover under 4 ms, IP66 and integrated smart meter The GoodWe GW29.999K-ETA-G20 is a powerful ESA power module for three-phase high-voltage storage solutions with high PV flexibility and fast backup switchover. The model is designed for demanding residential and small commercial applications and can be integrated modularly into the GoodWe ESA system.Scope of delivery: 1x GoodWe GW29.999K-ETA-G20, 1x integrated smart meter, 1x integrated WiFi module, 1x Battery Base
from 3.069,00 €
incl. VAT
-
GoodWe GoodWe ESA 5 kW - GW5K-ETA-G20
- 5 kW
- 3 MPPT
The GoodWe ESA 5 kW GW5K-ETA-G20 is the three-phase power module of the ESA series for modern PV storage solutions in the private and small commercial sector. Within the ESA series, GoodWe combines a pre-wired, modular concept with hybrid inverter, backup function and intelligent energy management. The GW5K-ETA-G20 model works with three MPP trackers, supports up to 10 kW PV input power and is designed for operation with compatible ESA high-voltage battery modules. The series is designed for simple installation, fast commissioning and flexible storage expansion. For everyday use, the device offers a backup port with a switchover time of under 4 ms as well as protection functions such as AFCI and IP66. This makes the power module suitable for users who want to build a compact and scalable storage solution within the GoodWe ESA series. Three-phase power module of the GoodWe ESA series3 MPP trackers with up to 10 kW PV input powerIP66, integrated AFCI and backup switchover <4 ms The GoodWe ESA 5 kW GW5K-ETA-G20 is a 3-phase power module for modular high-voltage storage solutions with 5 kW rated power. It is designed for combination with compatible ESA battery modules and combines high system integration with flexible expandability.Scope of delivery: 1x GoodWe GW5K-ETA-G20, 1x integrated smart meter, 1x integrated WiFi module, 1x Battery Base
from 1.450,00 €
incl. VAT
-
GoodWe GoodWe ESA 8 kW - GW8K-ETA-G20
- 8 kW
- 3 MPPT
- 10-year manufacturer warranty
The GoodWe ESA 8 kW GW8K-ETA-G20 is a three-phase hybrid inverter of the ESA series for modular high-voltage storage systems. The ESA series combines inverter, battery integration and intelligent energy management in a pre-wired system platform. The 8 kW model works with 3 MPP trackers, a PV voltage range of 120 to 950 V and a maximum PV input power of 16 kW. Within the series, the device supports LFP batteries in the voltage range of 700 to 950 V and is designed for scalable storage solutions of up to 108 kWh. The integrated backup function with a switchover time of under 4 ms as well as AFCI, surge protection and IP66 design support safe and robust operation. This makes the GW8K-ETA-G20 suitable for residential buildings and small commercial applications with high demands on self-consumption, emergency power capability and system expandability. 3 MPP trackers for flexible PV designIntegrated smart meter and backup port with switchover time of under 4 msIP66, AFCI and scalable ESA storage architecture of up to 108 kWh. The GW8K-ETA-G20 is the 8 kW power module of the three-phase GoodWe ESA series and is designed for modular high-voltage storage solutions. It combines flexible PV connection, integrated safety functions and fast backup operation in a compact system design.Scope of delivery: 1x GoodWe GW8K-ETA-G20, 1x integrated smart meter, 1x integrated WiFi module, 1x Battery Base
from 1.739,00 €
incl. VAT
-
GoodWe GoodWe ESA 25 kW - GW25K-ETA-G20
- 25 kW
- 4 MPPT
- 10-year manufacturer warranty
The GoodWe ESA 25 kW GW25K-ETA-G20 is a three-phase hybrid inverter of the ESA series for larger residential buildings and small to medium commercial applications. The series combines inverter, high-voltage battery storage and intelligent energy management in a modular system concept. The pre-wired all-in-one design simplifies installation and speeds up commissioning. The device supports whole-home backup, scalable storage expansion and high system flexibility for growing energy requirements. Within the ESA series, the 25 kW variant is designed in particular for powerful PV systems with high self-consumption and load management. The combination of 4 MPPT, IP66 protection, AFCI and a wide range of communication interfaces makes the system a future-proof solution for demanding projects.4 MPPT for flexible string design25 kW three-phase hybrid output with backup functionPart of the modularly expandable GoodWe ESA seriesThe GoodWe ESA 25 kW is a powerful hybrid inverter for large PV storage solutions with high flexibility in design and expansion. It is particularly suitable for demanding family homes and smaller commercial properties that want emergency power, load management and intelligent energy control.Scope of delivery: 1x GoodWe ESA 25 kW hybrid inverter GW25K-ETA-G20, 1x integrated smart meter, 1x integrated WiFi module, 1x Battery Base
from 2.550,00 €
incl. VAT
-
GoodWe GoodWe ESA 10 kW - GW10K-ETA-G20
- 10 kW
- 4 MPPT
- 10-year manufacturer warranty
The GoodWe ESA series is designed as a three-phase all-in-one energy storage solution for residential buildings and smaller commercial applications and combines hybrid inverter, battery management and intelligent energy management in a single system. The GW10K-ETA-G20 model offers 10 kW AC rated power, works with 4 MPP trackers and supports a PV input voltage range of 120 to 950 V. Within the ESA series, the device is designed for flexible storage expansion and can be combined with the matching GoodWe BAT D G20 battery modules. The series relies on a pre-wired, modular design, which simplifies installation and commissioning. For high security of supply, the system has an integrated backup function with a switchover time of under 4 ms. This makes the ESA series particularly suitable for users looking for a compact, scalable storage solution with emergency power capability, modern communication and a high protection class. 10 kW three-phase hybrid inverter with 4 MPP trackers Integrated backup function with switchover time of under 4 ms IP66 protection class as well as WLAN, LAN, Bluetooth and RS485 integrated The GoodWe ESA 10 kW is a three-phase hybrid inverter from the ESA series for powerful PV and storage applications. It combines high flexibility in system design with fast switchover in the event of backup and modern communication features. Scope of delivery: 1x GoodWe ESA 10 kW hybrid inverter GW10K-ETA-G20, 1x integrated smart meter, 1x integrated WiFi module, 1x Battery Base
from 1.789,00 €
incl. VAT
-
GoodWe GoodWe ESA 20 kW - GW20K-ETA-G20
- 20 kW
- 4 MPPT
The GoodWe ESA 20 kW (GW20K-ETA-G20) is a three-phase high-voltage hybrid inverter of the ESA series for private and small commercial storage solutions. The series is designed as an all-in-one system for capacities from 5 to 108 kWh. The technical data below applies to the power module according to the manufacturer's data sheet. Highlights Output: 20 kW AC rated power, up to 40 kW PV input power Backup: Switchover to backup power in under 4 ms; internal bypass for whole-home backup 4 MPPT: Flexible design of PV strings in the range of 120 ~ 950 V Scalable: Works with ESA battery modules (LFP) up to 108 kWh Robust: Protection rating IP66, operation from -35 to +60 °C, smart fan cooling Technical specifications Designation Value Type 3-phase hybrid inverter AC rated power 20 kW Max. PV input power 40 kW Number of MPPT 4 Max. DC input voltage 1000 V MPPT operating voltage range 120 ~ 950 V Battery voltage range 700 ~ 950 V Max. discharge power 22.0 kW Backup rated power 20 kVA Backup max. (off-grid operation) 22.0 kVA (30 kVA, 10 s) Backup switchover time < 4 ms Max. efficiency 98.1% Protection rating IP66 Dimensions (W × H × D) 800 × 340 × 270 mm Weight 34 kg Scope of delivery 1x GoodWe GW20K-ETA-G20 hybrid inverter 1x integrated smart meter 1x integrated WLAN module 1x battery base Who is it for? The GW20K-ETA-G20 is suitable for larger residential buildings and small commercial applications with a three-phase connection where high output, storage expansion and backup power are required. The battery modules of the ESA series (LFP, 700 ~ 950 V in the three-phase system) are selected separately; we are happy to clarify in a consultation which combination suits your needs. Good to know Installation and grid connection should be carried out by a qualified electrician; registration obligations depend on the requirements of your grid operator. We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
from 2.450,00 €
incl. VAT
-
GoodWe GoodWe ESA 15 kW - GW15K-ETA-G20
- 15 kW
- 4 MPPT
- 10-year manufacturer warranty
The GoodWe ESA 15 kW (GW15K-ETA-G20) is a three-phase high-voltage hybrid inverter of the ESA series for private and small commercial storage solutions. The series is designed as an all-in-one system for capacities from 5 to 108 kWh. The technical data below applies to the power module according to the manufacturer's data sheet. Highlights Output: 15 kW AC rated power, up to 30 kW PV input power Backup: Switchover to backup power in under 4 ms; internal bypass for whole-home backup 4 MPPT: Flexible design of PV strings in the range of 120 ~ 950 V Scalable: Works with ESA battery modules (LFP) up to 108 kWh Robust: Protection rating IP66, operation from -35 to +60 °C, smart fan cooling Technical specifications Designation Value Type 3-phase hybrid inverter AC rated power 15 kW Max. PV input power 30 kW Number of MPPT 4 Max. DC input voltage 1000 V MPPT operating voltage range 120 ~ 950 V Battery voltage range 700 ~ 950 V Max. discharge power 16.5 kW Backup rated power 15 kVA Backup max. (off-grid operation) 16.5 kVA (30 kVA, 10 s) Backup switchover time < 4 ms Max. efficiency 98.1% Protection rating IP66 Dimensions (W × H × D) 800 × 340 × 270 mm Weight 34 kg Scope of delivery 1x GoodWe GW15K-ETA-G20 hybrid inverter 1x integrated smart meter 1x integrated WLAN module 1x battery base Who is it for? The GW15K-ETA-G20 is suitable for larger residential buildings and small commercial applications with a three-phase connection where high output, storage expansion and backup power are required. The battery modules of the ESA series (LFP, 700 ~ 950 V in the three-phase system) are selected separately; we are happy to clarify in a consultation which combination suits your needs. Good to know Installation and grid connection should be carried out by a qualified electrician; registration obligations depend on the requirements of your grid operator. We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
from 2.100,00 €
incl. VAT
-
GoodWe GoodWe ESA 6 kW - GW6K-ETA-G20
- 6 kW
- 3 MPPT
- 10-year manufacturer warranty
The GoodWe ESA GW6K-ETA-G20 is a three-phase power module of the ESA series for private and smaller commercial storage applications. The series combines hybrid inverter, high-voltage battery system and intelligent energy management in a modular all-in-one concept that simplifies installation and speeds up commissioning. The 6 kW model offers 3 MPP trackers, up to 12 kW PV input power and is designed for LFP high-voltage batteries of 700 to 950 V. For high security of supply, the ESA series supports a backup port with a switchover time of under 4 ms. With up to 98.0% efficiency, IP66 protection and intelligent fan cooling, the device is designed for a robust and modern system setup. The ESA series is aimed at users who are looking for a flexibly expandable storage solution with contemporary communication and a high degree of system integration. 3-phase hybrid inverter with 6 kW AC output and 3 MPP trackersBackup port with switchover time of under 4 ms and integrated smart meterUp to 98.0% efficiency, IP66 and communication via RS485, WLAN, LAN and Bluetooth The GoodWe ESA GW6K-ETA-G20 is a compact 6 kW power module for modular high-voltage storage solutions of the ESA series. It combines high PV flexibility, fast backup switchover and modern communication interfaces in a three-phase hybrid inverter. Scope of delivery: 1x GoodWe ESA GW6K-ETA-G20 power module, 1x integrated smart meter, 1x integrated WLAN module, 1x battery base
from 1.679,00 €
incl. VAT
-
GoodWe GoodWe ESA Battery Expansion Kit
- 10-year manufacturer warranty
The GoodWe ESA Battery Expansion Kit is an accessory for the GoodWe ESA series and is used to expand additional battery towers. According to the product information, one expansion kit is required per tower expansion. The ESA series is designed as a three-phase all-in-one energy storage solution and combines inverter, battery and intelligent energy management in a single system. Thanks to its modular design, the storage capacity of the series can be expanded to up to 108 kWh. In addition, GoodWe cites for the series, among other things, a preconfigured design, a backup switchover time of under 4 ms and AI-controlled energy management. The expansion kit is therefore the right complement for scalable ESA storage solutions in the private and small commercial sector. Required for each GoodWe ESA tower expansionIncludes Expansion Base and connection components10-year warranty The expansion kit supplements the GoodWe ESA series with the components required for additional battery towers. It is suitable for storage projects in which an existing ESA solution is to be expanded modularly. Scope of delivery: 1x Expansion Base floor plate, 4x locking bracket, 7x M5 screws, 4x M6 expansion screws, 4x height-adjustable feet, 1x OT ground connection, 1x terminating resistor, 1x battery top cover, 2x drilling template paper, 1x battery expansion cluster wiring harness, 8x PIN connectors, 1x battery expansion cluster positive connection cable, 1x battery expansion cluster negative connection cable, 1x battery expansion cluster network cable, 2x silicone cover, 2x handles, 1x hex key, 1x product documentation
-
GoodWe GoodWe ESA 12 kW - GW12K-ETA-G20
- 12 kW
- 4 MPPT
The GoodWe ESA 12 kW GW12K-ETA-G20 is a three-phase hybrid inverter of the ESA series for private and small commercial energy storage solutions. The ESA series combines inverter, battery integration and intelligent energy management into a modular system. The 12 kW model offers four MPP trackers, up to 24 kW PV input power and an MPPT voltage range of 120 to 950 V. The inverter works with high-voltage LFP batteries in the range of 700 to 950 V and achieves a rated apparent output power in emergency power mode of 12 kVA. Safety and robustness are ensured by IP66, integrated AC and DC surge protection components, AFCI and remote shutdown, among other things. Thanks to the fast backup switchover of under 4 ms and the modular expandability of the ESA series, the system is suitable for applications with high demands on security of supply and later scaling. 4 MPP trackers for flexible string design 12 kVA emergency power output with switchover in under 4 ms IP66, AFCI and integrated protection functions for high system safety The GW12K-ETA-G20 is a 12 kW hybrid inverter for three-phase PV storage systems with a high-voltage battery connection. As part of the GoodWe ESA series, it offers strong backup capability, modern protection technology and a modular basis for private as well as small commercial applications. Scope of delivery: 1x GoodWe ESA 12 kW GW12K-ETA-G20 hybrid inverter, 1x integrated smart meter, 1x Battery Base, 1x integrated WiFi module
from 1.650,00 €
incl. VAT
You have seen 24 out of 35 products
Start with the system output. The ES series covers small hybrid systems, ET and ESA offer larger output levels with a storage connection, and SDT and GT are designed for larger roof systems. If you want to store electricity, check the compatibility of Lynx Home storage or ESA batteries with the chosen inverter.
In our range you will find inverters in many output classes, the HCA wallboxes with 11 and 22 kW and Lynx Home storage with 5 to 20 kWh. There is also the ESA expansion kit and the Vela double carport.
Alongside the standard devices, with the Vela double carport we carry a solution that combines a roof structure and photovoltaics. It is described individually in the Carport collection. For businesses, inverters with 80 to 125 kW are available.
Because the selection is large, a short conversation in advance is worthwhile: you can reach us on +49 931 760 260 40 or by email at kontakt@energie24.shop. Installation and grid registration are carried out by a qualified electrician.
Frequently asked questions
Which series suits my house?
That depends on output, number of phases and whether you want storage. Smaller hybrid devices of the ES series suit small systems, ET and ESA medium ones. Tell us your system size and we will suggest types.
Are Lynx Home storage units modular?
The designation states capacities of 5, 10, 15 and 20 kWh. Which combination is possible with which inverter is set out in the manufacturer's documentation. Ask us before you buy.
What distinguishes the HCA wallboxes?
According to the product title, the models are available with 11 and 22 kW as well as Wi-Fi and RFID. For the connection, the grid operator's approval must be observed, and installation is carried out by an electrical contractor.