Welcome to our Inverter category – your source for efficient energy conversion in your home. Discover our selection of home solar inverters and PV inverters perfect for your home. Our products guarantee maximum efficiency and are ideal for self-consumption of solar power. Regardless of whether you choose grid-connected or hybrid inverters, we offer high-quality solutions for your photovoltaic system. #EnergyFuture 🌞🔌🌱🏡

262 products


  • Growatt NEO 800M-X Wechselrichter - NeueEnergie24 Growatt NEO 800M-X Wechselrichter - NeueEnergie24

    Growatt Growatt NEO 800M-X inverter

    The Growatt NEO 800M-X microinverter is characterized by modern technology and outstanding efficiency. It is equipped with two independent MPP trackers that allow flexible adaptation to different solar module configurations, ideal for use in balcony power plants. The inverter supports a maximum input voltage of 60 V and a starting voltage of 16 V, achieves a maximum AC apparent power of 800 VA and offers an efficiency of up to 97.3%. Integrated protective mechanisms such as DC reverse polarity protection, AC surge arresters and ground fault monitoring ensure safety. Thanks to its IP67 protection class, the inverter is robust against environmental influences. The integrated WiFi communication enables easy monitoring and control. With dimensions of 260 x 220 x 43 mm and a weight of 3.1 kg, the NEO 800M-X is easy to install and handle. It works reliably in a temperature range of -40°C to +65°C, with natural convection for cooling. Growatt offers a 10-year warranty on the device, which underlines its durability and reliability. Technical data: Maximum input voltage: 60 V Starting voltage: 16 V Maximum AC apparent power: 800 VA Efficiency: Up to 97.3% Protection class: IP67 Dimensions: 260 x 220 x 43mm Weight: 3.1 kg Operating temperature range: -40°C to +65°C Cooling: Natural convection Warranty: 10 years Manufacturer: Growatt Manufacturer No.: A9891776 EAN/GTIN: 4255704414004

    €113,98 €98,00

  • HOYMILES HMS-800-2T Wechselrichter inkl. WIFI - NeueEnergie24 HOYMILES HMS-800-2T Wechselrichter inkl. WIFI - NeueEnergie24

    Hoymiles HOYMILES HMS-800W-2T inverter incl. WIFI

    Hoymiles Micro Inverter HMS-800W-2T (built-in WIFI) Hoymiles HMS series microinverters are specially designed for mini PV systems, such as balcony systems, and feature an integrated Industrial+ class Wi-Fi module. With the user-friendly HMS Plug and Play cable, installation is effortless. Users can plug the microinverter directly into a power outlet – no complex wiring is required. The HMS series microinverters simplify system monitoring by enabling seamless access to real-time production data by connecting smartphones directly to the microinverter. Remote monitoring is also possible via the S-Miles Cloud by creating PV systems.

    €139,00

  • Growatt SPF 6000 ES (WiFi) Off-Grid Inverter Growatt SPF 6000 ES (WiFi) Off-Grid Inverter

    Growatt Growatt SPF 6000 ES (WiFi) Off-Grid Inverter

    Growatt SPF 6000 ES Plus – State-of-the-art off-grid solar inverter The Growatt SPF 6000 ES Plus is the ideal solution for efficient energy management in residential and commercial applications. This powerful off-grid inverter with 6000W output power offers advanced technology and flexibility for the use and storage of solar energy - perfect for locations without a grid connection or with unstable network conditions. Main features: IP20 rated : Robust housing for indoor use that guarantees long-lasting reliability. Powerful : Up to 6000W output power and integrated MPPT charge controller for maximum energy yield from your solar modules. Optimum performance : 2 independent MPP trackers with 16A input current each, supporting one string per tracker – for maximum flexibility and efficiency. Scalability : Supports parallel operation of up to 6 units to flexibly adapt energy requirements. Easy installation and connectivity : WiFi and GPRS communication options for real-time monitoring and control via Growatt Shine app . Versatility : Supports different battery types such as lead-acid and lithium-ion , allowing you to customize your storage solutions. Off-grid function : Perfect for locations without a grid connection or with unstable power supplies – the inverter works reliably in off-grid mode with battery backup. Powerful technology for maximum energy yield With its 6000W output power and an integrated MPPT charge controller, the Growatt SPF 6000 ES Plus ensures that your solar modules always work at maximum efficiency. Thanks to the two MPP trackers, the modules can be controlled independently of each other to maximize energy yield. Whether for private homes or commercial applications - this inverter adapts to your energy needs and offers a flexible, scalable solution. Easy management and real-time monitoring The WiFi and GPRS communication options of the Growatt SPF 6000 ES Plus allow you to easily monitor and control your solar system via the Growatt Shine app . This user-friendly interface gives you full access to system data at all times to optimize energy consumption and savings. Reliability and flexibility Whether lead-acid or lithium-ion batteries - the Growatt SPF 6000 ES Plus supports a wide range of battery types and is therefore ideal for individual energy storage solutions. In addition, the off-grid mode ensures an uninterrupted power supply and is ideal for remote areas or places with unstable power supplies. Order the Growatt SPF 6000 ES Plus now and take the step towards an independent, sustainable energy supply!

    €699,00

  • Growatt SPF 3000TL HVM-24 Off-Grid Inverter

    Growatt Growatt SPF 3000TL HVM-24 Off-Grid Inverter

    The Growatt SPF 3000TL HVM-24 is an off-grid inverter. It is suitable for a maximum circuit voltage of 102VDC. The inverter can be used with batteries, but can also work without them. The integrated solar charger optimizes the charging and discharging of the battery. Priorities can be set, for example, charging from the grid can be preferred over charging from the PV system. Monitoring is possible if a separate Wi-Fi or GPRS dongle is added. The solar charger helps to maximize the longevity of the battery. This is partly because the solar charger continuously regulates the charge to and from the battery. This protects the battery from overcharging or total discharge. A separate dongle allows you to connect the inverter to a mobile phone or a desktop computer, for example. This allows you to query the status of the entire PV system. The dongle is available in a Wi-Fi and GPRS version.

    €429,00

  • Last stock! Growatt SPF 5000 ES (WiFi) Off-Grid Inverter Growatt SPF 5000 ES (WiFi) Off-Grid Inverter

    Growatt Growatt SPF 5000 ES (WiFi) Off-Grid Inverter

    Growatt SPF 5000 ES Off-Grid Inverter The Growatt SPF 5000 ES is an inverter that can operate both with and without a battery. The maximum input voltage is 450VDC. The integration of an MPPT charge controller optimizes the charging and discharging of the battery to extend its lifespan. Priority can be given to charging from the grid or the connected PV system. The system can also be remotely monitored via a WiFi or GPRS dongle. Parallel scaling is supported. Charge controller The MPPT charge controller lowers the voltage of the modules to the required level to charge the battery. The current is increased in the same proportion as the voltage is lowered. This happens continuously during the day to optimize the use of energy. This depends on the power of the sun, the angle and temperature, as well as the condition of the modules. The charge controller also ensures that the battery is neither overcharged nor completely discharged. Monitoring the Growatt SPF 5000 ES off-grid inverter A separate dongle allows remote access to the inverter. There is a WiFi and a GPRS version. Data can be checked at any time and priority can be given to either supply from the grid or from the PV system. Capacity expansion The capacity of the system can be expanded to up to 30 kW by combining a total of six of these units in parallel operation.

    €664,00

  • Growatt RS485/CAN

    Growatt Growatt RS485/CAN

    Product Growatt RS485/CAN is a battery communication connection box with 8 connection ports.

    €14,00

  • Growatt EV charger THOR 22AS-S-V1 (WIFI)

    Growatt Growatt EV charger THOR 22AS-S-V1 (WIFI)

    The Growatt THOR 22AS-S (WIFI) represents Growatt's latest advancement in electric vehicle charging technology. This advanced charger uses professional technology to provide effective power supply for electric vehicles. Thanks to its user-friendly interface and diverse functions such as control, billing and communication, This charger is at the forefront of modern EV charging technology. With the ability to connect to a back-office server, the THOR charging station offers users the ability to make reservations and payments via the specially developed mobile app. Another important feature is its compatibility with all electric vehicles. For those who prioritize sustainability, this charger can be integrated into both an existing and newly installed photovoltaic system. This allows electric vehicles to be charged with 100% renewable energy by harnessing excess solar power. For installation, the Growatt THOR 22AS-S (WIFI) charging station can be easily attached to a wall or to the Growatt AC mounting platform. Growatt also recommends installing the Growatt Smart Meter to make the most of the smart features. Although these chargers are designed to connect to Growatt PV installations, they also work perfectly without a PV system. Specifications Growatt THOR 22AS-S (WIFI) Type: Three-phase Connection: socket (without cable) Charging power: 22 kW Dimensions (W x H x D): 295 x 466 x 189 mm Weight: 10kg Connection: WIFI/LAN Installation: Suitable for outdoor installation Protection class: IP 65

    €685,00

  • APSystems DS3D 1800 W Micro Inverter APSystems DS3D 1800 W Micro Inverter

    APSystems APSystems DS3D 1800 W Micro Inverter

    APsystems is expanding its 3rd generation dual microinverter series with the DS3D. With an unprecedented output power of 1800 W, the DS3D can be connected to 4 high-performance modules (2 times 2 in series). With 2 independent MPPTs and an encrypted ZigBee signal, the DS3D benefits from a completely new architecture. Doubling the performance of the most powerful dual microinverter series The DS3D series achieves unprecedented performance and is compatible with other DS3 microinverters and accessories. It features 2 input channels, each with independent MPPT, and encrypted wireless Zigbee communication. With its unparalleled performance, 97% efficiency and high reliability, APsystems' DS3D microinverter is a game changer for multi-family and commercial solar deployments. A micro inverter for connecting four modules Maximum output power of 1800 W Two input channels with independent MPPT Designed for the highest possible high-performance modules (maximum input current 20 A) Maximum reliability, IP67 Encrypted Zigbee communication Integrated safety protection relay

    €305,00

  • Victron SmartSolar MPPT RS 450/100 48V charge controller Victron SmartSolar MPPT RS 450/100 48V charge controller

    Victron Victron SmartSolar MPPT RS 450/100 48V charge controller

    The MPPT RS SmartSolar from Victron Energy (MPN SCC145110410) is a 48V solar charge controller with a PV input voltage of up to 450 VDC and an output current of 100A. It is used in on-grid and off-grid solar applications where maximum battery charging power is required. Characteristics With ultra-fast Maximum Power Point Tracking (MPPT) Multiple independent MPPT tracking inputs Isolated PV connectors for additional safety Wide MPPT voltage range Light, efficient and quiet Integrated display and Bluetooth communication PV insulation resistance monitoring for safety at higher voltages VE.Can and VE.Direct connection I/O connections Configure and monitor with VictronConnect app or VRM portal The integrated BluetoothSmart connection allows for quick monitoring or configuration of settings via app. The integrated 30-day history shows the individual performance of each MPPT tracker. The app allows the display of e.g. battery voltage and current, PV voltage and current, historical data and trends. The VictronConnect app is available for Android, iOS, Windows and macOS X. When the solar controller is connected to a GX device and the Internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers . Additional units connected in series The SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply "daisy chained" together with an RJ45 cable. When connected together, all individual charge controllers synchronize their charging levels. You can also send your data to a GX device (such as the CerboGX) for monitoring via the same cable. Technical data Battery voltage: 48V Nominal charging current: 100A Max. charging power: 5.8kW at 57.6V Charging algorithm: multi-stage adaptive (customizable) Max. DC PV voltage: 450V MPPT operating voltage range: 80-450V Number of trackers: 2 Max. PV operating input current: 18A per tracker Protection class: IP21 Dimensions: 440 x 313 x 126mm Weight: 7.9 kg Scope of delivery: 1x Victron SmartSolar MPPT RS 450/100 48V charge controller

    €1.004,00

  • SOFAR Hybrid-Wechselrichter HYD6000-EP 1-phasig 2xMPPT - NeueEnergie24

    Sofar SOFAR hybrid inverter HYD6000-EP 1-phase 2xMPPT

    Product specifications: Recommended PV input power: 9000W DC starting voltage: 100V Maximum input current per MPPT: 13A / 13A Rated power: 6000W Protection class: IP65 Standard manufacturer warranty: 5 years Inverter / Inverter Sofar Solar HYD 6000-EP Single phase Protection class IP 65 A range of optional operating modes Built-in deep discharge function Fanless design with heat dissipation function Compatible with grid-tied and off-grid systems EPS function, switch-on time less than 10 milliseconds Flexible configuration of lead-acid and lithium batteries

    €1.383,98

  • Victron MultiPlus 24/3000/70-50 24V 230V 2400W 6000W Inverter 70A Charger Victron MultiPlus 24/3000/70-50 24V 230V 2400W 6000W Inverter 70A Charger

    Victron Victron MultiPlus 24/3000/70-50 24V 230V 2400W 6000W Inverter 70A Charger

    The Multiplus 24/3000/70-50 from Victron (MPN PMP243021011) is a device combination of a 24V 2400W sine wave inverter and battery charger. The permanently integrated battery charger delivers an impressive 70A, which means that even large batteries can be fully charged quickly when shore/mains power is available. The 24V sine wave voltage converter built into the Multiplus converts your power from the battery into 230V alternating current. Thanks to the real sine wave, the power quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, a lightning-fast 50A transfer switch is also installed, which can also be used to implement numerous grid-connected solutions. In addition to the VE.Bus port, a COM port is also available for system integration, which enables virtually limitless networking of the Multiplus. Comprehensive and flexible As it has an inverter and charger as well as a lightning-fast 50A transfer switch, it is an ideal inverter for mobile homes, boats or yachts and for grid-connected uninterruptible power supplies in the event of power fluctuations or power outages. It can also be used in grid-connected self-consumption systems that only draw power from the supplier when the battery power is no longer sufficient or as a UPS solution in which the Multiplus steps in when the power from the grid operator suddenly fails, thus ensuring an uninterruptible power supply. Key features of the Multiplus C 24/3000/70-50 2400W continuous power and 6000W peak power, for 24V battery voltage Device combination of inverter with transfer switch and 70A battery charger delivers pure 230V sine wave voltage and a clean 50Hz frequency VE.Bus communication port provides extensive possibilities for networking, system integration, configuration and control of Victron Multiplus devices. supports three-phase operation (3 identical units of the same model required) Multiplus devices can be connected in parallel, up to 6 devices can be connected in parallel and the system performance can thus be significantly increased if necessary 2 AC outputs from Multiplus 3000 and larger. The second output can be used to connect devices that should only run when mains power is available From the Multiplus 3000 onwards, a COM port is available in addition to the VE.Bus port, meaning that there are virtually no limits to system integration PowerControl function enables working with limited generator power as well as limited shore or mains power PowerAssist function enables “performance increase” of generators and shore connection support when required Can be used as a UPS solution for uninterruptible power supply, thanks to the integrated transfer switch with 16A or 50A Can be used for grid-connected self-consumption systems that only draw power from the grid operator when the battery capacity is no longer sufficient or other programmable events have occurred compatible with numerous Victron control and display panels Three-phase operation possible with identical MultiPlus inverters Massive performance expansion possible Apart from the parallel connection, three units of the same model can also be configured for a three-phase output. But that's not all: up to six sets of three units can be connected in parallel to achieve a huge 75 kW / 90 kVA inverter and over 2,000 A charging capacity (calculated with the 5000 version) PowerControl – Working with limited generator power, limited shore or mains power The MultiPlus is a very powerful battery charger. It therefore takes a lot of power from the generator or shore power supply (almost 10A per 5kVA Multi at 230 VAC). The maximum mains or generator current to be drawn can be set using the Multi Control remote control panel. The MultiPlus then takes other connected AC consumers into account and only uses the power that is "left over" for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist – “performance enhancement” of generators and shore connection support This function gives the PowerControl principle a new dimension. It enables the MultiPlus to support alternative sources that are too weak. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated for by energy from the battery. BackUp system: alternating current even in the event of a power failure The Multiplus can be used with both off-grid and grid-connected PV systems as well as other alternative energy systems. Software is available to detect a grid failure. Simple system configuration If settings need to be changed on a single device, this can be done within a few minutes using a DIP switch setting procedure. Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software. monitoring options and on-site control Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, Smartphone or Tablet (Bluetooth Smart), Laptop or Computer (USB or RS232). remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and monitoring of the MultiPlus. In addition, system data can be stored and viewed free of charge on the VRM (Victron Remote Management) website. remote configuration If systems with a Color Control Panel are connected to the Ethernet, they can be accessed and settings can be changed remotely. Scope of delivery: 1x Victron PMP243021011 Multiplus 24/3000/70-50 device combination consisting of 24V 2400W sine wave converter + 24V 70A battery charger + 50A transfer switch 1x user manual

    €949,00

  • Fronius Symo GEN24 SC 12.0 Standard

    Fronius Fronius Symo GEN24 SC 12.0 Standard

    The Fronius Symo GEN24 SC Plus impresses with a variety of integrated features that will make the hearts of private system owners beat faster. Communication via WLAN and Ethernet as well as the simple and quick integration of third-party components offer a high level of flexibility with other software and hardware products. The basic emergency power supply PV Point, which is integrated as standard, guarantees security of supply and the greatest possible independence. In the SC variant, Fronius has increased the possible DC input currents on the inverter. This means that high-current modules can also be connected without any problems. Thanks to Multi Flow Technology, longer emergency power supply and higher self-consumption are possible. Open interfaces allow easy integration of third-party components. Fronius optionally offers a full backup emergency power function for operating heat pumps.

    €2.237,00

  • Fronius Symo GEN24 SC 12.0 Plus

    Fronius Fronius Symo GEN24 SC 12.0 Plus

    The Fronius Symo GEN24 SC Plus impresses with a variety of integrated features that will make the hearts of private system owners beat faster. Communication via WLAN and Ethernet as well as the simple and quick integration of third-party components offer a high level of flexibility with other software and hardware products. The basic emergency power supply PV Point, which is integrated as standard, guarantees security of supply and the greatest possible independence. In the SC variant, Fronius has increased the possible DC input currents on the inverter. This means that high-current modules can also be connected without any problems. Thanks to Multi Flow Technology, longer emergency power supply and higher self-consumption are possible. Open interfaces allow easy integration of third-party components. Fronius optionally offers a full backup emergency power function for operating heat pumps.

    €2.856,00

  • SolarEdge Home Load Controller

    SolarEdge SolarEdge Home Load Controller

    The SolarEdge wireless Home Load Controller is used to optimize energy consumption by regulating the operation of connected devices. The device monitors and manages all permanently connected devices in the home to increase backup time. The Home Load Controller can control both small and large appliances. Solar power consumption is optimized, which reduces dependence on the power grid and can save money. The SolarEdge load controller is seamlessly integrated into the SolarEdge Home network and has a wide AC and DC voltage range. Specifications SolarEdge Home Load Controller SE-SEM-DCS-R08-00: Suitable for the SolarEdge Home network Configuration via SetApp Protection class IP30 Dimensions: 100 x 50 x 35 mm

    €117,00

  • HOYMILES HMS-1800-4T 1F Wechselrichter - NeueEnergie24 HOYMILES HMS-1800-4T 1F Wechselrichter - NeueEnergie24

    Hoymiles HOYMILES HMS-1800-4T 1F Inverter

    Hoymiles Micro Inverter HMS 1800-4T With an output power of up to 2,000 VA, the new Hoymiles HMS-2000 microinverter is at the forefront of 4-in-1 microinverters. Each microinverter can connect up to four PV modules with independent MPPT control and monitoring, enabling higher energy efficiency and easier use. The new wireless Sub-1G solution enables stable communication for installations in any environment. Features: Up to four modules can be connected to each microinverter - quick installation and lower costs Safe in rooftop solar stations equipped with an isolated transformer to withstand sudden outages The wireless Sub-1 G solution enables stable communication in commercial and industrial facilities High performance micro inverters with output power up to 2000 VA Independent MPPT and monitoring functions enable higher efficiency and easier use The reactive power control system complies with EN50549-1 :2019, VDE-AR-N 4105:2018, UL 1741, ABNT NBR 16150, etc.

    €349,00

  • KOSTAL PLENTICOIN card EU without DE KOSTAL PLENTICOIN card EU without DE

    Kostal KOSTAL PLENTICOIN card EU without DE

    The QR code on the PLENTICOIN card is used to retrieve activation codes for product extensions of KOSTAL inverters and wall boxes and can be used in the KOSTAL Solar webshop. This is a Single-purpose voucher.

    €139,00

  • KOSTAL PLENTICOIN Card DE KOSTAL PLENTICOIN Card DE

    Kostal KOSTAL PLENTICOIN Card DE

    The QR code on the PLENTICOIN card is used to retrieve activation codes for product extensions of KOSTAL inverters and wall boxes and can be used in the KOSTAL Solar webshop. This is a Single-purpose voucher.

    €139,00

  • KOSTAL PLENTICORE L G3

    Kostal KOSTAL PLENTICORE L G3

    The KOSTAL PLENTICORE G3 is a transformerless inverter with 3 MPP trackers. Can be used universally as a solar, hybrid or battery inverter with basic outputs AC 4.0 (S) / 8.5 (M) / 15.0 kW (L). The benefits can optionally be extended with 1 - 2x Plenticoin. The battery input can be subsequently implemented with 3x Plenticoon via the 3rd MPP tracker and thus enables the connection of a compatible HV storage unit. Prepared for additional battery charging via AC energy sources (e.g. for KOSTAL Doppelpower). Emergency power operation can be implemented with the manual switch KOSTAL BackUp Switch G3 (08-000747) or via the enwitec mains switching box KOSTAL 3P 35kW (08-000772/773). 4 digital outputs for load control or event reporting, SG-Ready compatible Free monitoring via KOSTAL Solar Portal and Solar App Direct integration of an overvoltage protection module is possible with the KOSTAL DC overvoltage protection module G3 (08-000746).

    €2.449,00

  • KOSTAL PLENTICORE M G3

    Kostal KOSTAL PLENTICORE M G3

    The KOSTAL PLENTICORE G3 is a transformerless inverter with 3 MPP trackers. Can be used universally as a solar, hybrid or battery inverter with basic outputs AC 4.0 (S) / 8.5 (M) / 15.0 kW (L). The benefits can optionally be extended with 1 - 2x Plenticoin. The battery input can be subsequently implemented with 3x Plenticoon via the 3rd MPP tracker and thus enables the connection of a compatible HV storage unit. Prepared for additional battery charging via AC energy sources (e.g. for KOSTAL Doppelpower). Emergency power operation can be implemented with the manual switch KOSTAL BackUp Switch G3 (08-000747) or via the enwitec mains switching box KOSTAL 3P 35kW (08-000772/773). 4 digital outputs for load control or event reporting, SG-Ready compatible Free monitoring via KOSTAL Solar Portal and Solar App Direct integration of an overvoltage protection module is possible with the KOSTAL DC overvoltage protection module G3 (08-000746).

    €1.976,00

  • KOSTAL PLENTICORE S G3

    Kostal KOSTAL PLENTICORE S G3

    The KOSTAL PLENTICORE G3 is a transformerless inverter with 3 MPP trackers. Can be used universally as a solar, hybrid or battery inverter with basic outputs AC 4.0 (S) / 8.5 (M) / 15.0 kW (L). The benefits can optionally be extended with 1 - 2x Plenticoin. The battery input can be subsequently implemented with 3x Plenticoon via the 3rd MPP tracker and thus enables the connection of a compatible HV storage unit. Prepared for additional battery charging via AC energy sources (e.g. for KOSTAL Doppelpower). Emergency power operation can be implemented with the manual switch KOSTAL BackUp Switch G3 (08-000747) or via the enwitec mains switching box KOSTAL 3P 35kW (08-000772/773). 4 digital outputs for load control or event reporting, SG-Ready compatible Free monitoring via KOSTAL Solar Portal and Solar App Direct integration of an overvoltage protection module is possible with the KOSTAL DC overvoltage protection module G3 (08-000746).

    €1.380,00

  • KOSTAL PIKO CI 100

    Kostal KOSTAL PIKO CI 100

    The three-phase 100 kW inverter from KOSTAL has 16 DC inputs and 8 MPP trackers and an input current of 20 A per MPPT. DC installation is simple, cost-effective and possible without string collection boxes. The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strings and is reliable in use thanks to its integrated and certified grid service functions. We expect the necessary certificates for connection to the medium-voltage grid to be available in April 2024.

    €5.289,00

  • KOSTAL PLENTICORE plus G2 10 KOSTAL PLENTICORE plus G2 10

    Kostal KOSTAL PLENTICORE plus G2 10

    The three-phase hybrid inverter is always the right choice thanks to its wide range of possible applications - whether for generating electricity with up to 3 MPP trackers or for additional storage of self-generated energy via an optionally switchable battery input. The PLENTICORE plus can be used as a replacement device, when building a new system or in combination with an energy generation system. The second generation offers a new communication board for easy connection via Wi-Fi, SG-Ready interfaces for your heat pump and an additional RJ45 connection for other components. Please note: A PLENTICOIN is required to use the battery function.

    €1.768,00

  • KOSTAL PLENTICORE plus G2 8.5

    Kostal KOSTAL PLENTICORE plus G2 8.5

    The three-phase hybrid inverter is always the right choice thanks to its wide range of possible applications - whether for generating electricity with up to 3 MPP trackers or for additional storage of self-generated energy via an optionally switchable battery input. The PLENTICORE plus can be used as a replacement device, when building a new system or in combination with an energy generation system. The second generation offers a new communication board for easy connection via Wi-Fi, SG-Ready interfaces for your heat pump and an additional RJ45 connection for other components. Please note: A PLENTICOIN is required to use the battery function.

    €1.631,00

  • KOSTAL PLENTICORE plus G2 7.0

    Kostal KOSTAL PLENTICORE plus G2 7.0

    The three-phase hybrid inverter is always the right choice thanks to its wide range of possible applications - whether for generating electricity with up to 3 MPP trackers or for additional storage of self-generated energy via an optionally switchable battery input. The PLENTICORE plus can be used as a replacement device, when building a new system or in combination with an energy generation system. The second generation offers a new communication board for easy connection via Wi-Fi, SG-Ready interfaces for your heat pump and an additional RJ45 connection for other components. Please note: A PLENTICOIN is required to use the battery function.

    €1.479,00


You have seen 24 out of 262 products

Footer image

© 2024 NeueEnergie24, Powered by Shopify

    • American Express
    • Apple Pay
    • Google Pay
    • Klarna
    • Maestro
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account