Inverters for your photovoltaic system: making solar power usable in your home. Discover our selection of solar inverters and PV inverters for your home, for example from Hoymiles, Huawei or SMA. Whether grid-connected or as a hybrid inverter, we offer solutions for your photovoltaic system. You will find tips on choosing in our PV and solar FAQ.
Inverters
-
Victron Victron Orion-XS 12/12-50A 700W DC-DC battery charger
- 5-year warranty
The Orion-XS 12/12-50 700W battery charger from Victron Energy (MPN ORI121217040) offers comprehensive remote monitoring and remote control options, giving you full control over your device and system. The Orion-XS revolutionises adaptive DC-DC battery charging. It was developed specifically for use in dual-battery systems that are charged by a (smart) alternator. The innovative aluminium-board cooling technology delivers an amazing efficiency of 98 %, without the need for fans. The Orion-XS acts as both a DC-DC battery charger and a power source, and offers a wide input and output voltage range. This is particularly important in vehicles with a smart alternator of Euro 5 or Euro 6 class, which often delivers too low a charging voltage even when the engine is running, or in situations with longer cables, as is common on boats and motorhomes, where voltage drops can occur. In such scenarios, precise and controlled charging is essential to fully charge the service battery and to protect the starter/input battery from discharge. Key features of the Orion-XS 12/12-50 700W fully configurable engine shutdown detection low-temperature shutdown efficient cooling works with VictronConnect optional remote monitoring IP65 protection class (dust-tight and waterproof) adaptive four-stage charging algorithm With lead-acid batteries, it is crucial to keep the constant-voltage phase short after shallow discharges in order to prevent overcharging the battery. After a deep discharge, the constant-voltage phase is automatically extended to ensure that the battery is fully charged. The Orion XS offers fully programmable charging algorithms as well as eight preprogrammed battery settings. remote-controlled on/off switch The Orion XS can be switched on and off via the connector for remote on/off or via the VictronConnect app. Typical applications are the wiring of a switch or a battery management system (BMS). smart alternator compatibility A built-in mechanism determines whether the engine is running (engine shutdown detection), so that the charger is only activated when the alternator is supplying power. This ensures that the charger only draws power when the alternator is supplying power, i.e. when the engine is running. comprehensive electronic protection The protective functions cover overload, short circuit and overtemperature. The charger is protected against overheating by reducing the output power when the maximum device temperature is reached. Parallel connection to increase the output current Any number of units can be connected in parallel. Technical specifications max. constant short-circuit current: 50A continuous output power up to 40°C: 700W Input voltage range: 9-17V adjustable output voltage range: 10-17V Output voltage tolerance: +/- 0.25% max. efficiency: 98.5% No-load current consumption: <100mA Standby current consumption: <1.5mA Temperature range: -20°C to +60°C Humidity: max. 95% non-condensing Weight: 0.330kg Dimensions: 137.3mm x 123.1 x 40mm Scope of delivery 1x Victron Energy Orion-XS 12/12 50 700W DC-DC battery charger
254,00 €
-
Victron Victron SmartSolar MPPT 100/20-48 20A 12V 24V 48V Solar Charge Controller
- 5-year warranty
The Smartsolar 100/20-48 from Victron Energy (MPN SCC110020160R) is an MPPT solar charge controller with a maximum charging current of 20A for charging 12V, 24V and 48V batteries. Unlike the BlueSolar version, the Smart version has built-in Bluetooth, so you no longer need to buy a Bluetooth dongle. For communication with other Victron devices such as the Color Control GX or the MPPT Control, a VE.Direct port is still available as well. The built-in Bluetooth in the SmartSolar series is the wireless way to set up, monitor and update the controller using Apple and Android smartphones, tablets or other devices. The optional MPPT WireBox-S 100-20 from Victron Energy is the ideal addition to your SmartSolar charge controller. It safely covers the cable entries and connection terminals of the controller and protects them from external influences and accidental contact. Key technical features at a glance 20A maximum charging current, suitable for 12V and 24V batteries nominal PV power for 12V systems: 290W nominal PV power for 24V systems: 580W nominal PV power for 48V systems: 1160W 20A load output high peak efficiency of 98% freely programmable battery charging algorithm (via the free Victron Connect app) programmable light dimming functions (via the free Victron Connect app) Ultra-fast Maximum Power Point Tracking max. PV open-circuit voltage: 100V charging algorithm: multi-stage, adaptive integrated Bluetooth module Ultra-fast Maximum Power Point Tracking Especially under overcast skies, when the light intensity changes constantly, an extremely fast MPPT controller increases the energy yield by up to 30 % compared with PWM charge controllers and by up to 10 % compared with slower MPPT controllers. Intelligent load output Deep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be selected: see BatteryLife.The load output is short-circuit proof. Battery Life: intelligent battery management If the solar charge controller is unable to fully charge the battery within one day, the battery status keeps switching back and forth between "partially charged" and "end of discharge". This operating mode (no regular full charge) damages a lead-acid battery within a few weeks or months. The Battery Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e. the load is disconnected earlier) until the energy harvested is sufficient to charge the battery to almost 100 %. From that point on, the load disconnect threshold is modulated so that charging to almost 100 % is achieved about once a week.Scope of delivery: 1x Victron Energy Smartsolar MPPT 100/20-48 20A 12V 24V 48V Solar Charge controller1x user manual Note The device is marked 48V – the data sheet of the 48V version is printed on the side of the packaging. Contrary to this confusing marking on the device itself, it is, as described, suitable for 12V and 24V – and by now also for 48V battery banks. Until recently these were separate devices – one for 12V/24V and one for 48V – which have now been merged, and the printing on the housing and packaging was taken over from the 48V version
85,00 €
-
Hoymiles HOYMILES HMT-2000-4T 3F Inverter
- 2 kW
- 2 MPPT
HOYMILES HMT2000-4T microinverter The new generation of Hoymiles microinverters of the HMT-2000 series is designed for high-power photovoltaic panels with a maximum output power of up to 2000 VA and a maximum DC input current of up to 16 A. The innovative 4-input design allows faster installation and lower costs and makes the HMT-2000 series a very cost-effective choice. The new wireless Sub-1G solution enables more stable communication with the Hoymiles DTU gateway. The intelligent S-Miles Cloud platform enables monitoring at panel level as well as remote operation and remote maintenance. SPECIFICATIONS: Dimensions: 326 × 222 × 40.6 mm Rated output power: 2000VA Common panel output: 400 W to 670 W+ Maximum input current: 4 × 16A Max. input voltage: 65V Number of connected modules: 4 MPPT voltage range: 16V-60V Number of MPPTs: 2
372,00 €
-
Sossen Sossen Microinverter 2400W Wi-Fi
- 2.4 kW
- 4 MPPT
- 15-year warranty
The SOSSEN Micro 2400 is a microinverter with four independent MPP trackers for up to four PV panels. According to the data sheet, the series comes in power levels of 1600 W, 2000 W, 2200 W and 2400 W; this product corresponds to the 2400 W version with integrated Wi-Fi and Bluetooth. Highlights 4 MPPT: Four independent inputs, each panel works at its own operating point Input current: Up to 20 A per input Communication: 2.4 GHz Wi-Fi and Bluetooth integrated; monitoring via app and LED Safety: Rapid shutdown function, protection rating IP67, cooling by natural convection Warranty: 15 years standard, optionally 25 years Technical specifications Description Value Rated output power 2400 W Number of MPPTs 4 Max. input voltage 65 V MPPT voltage range 16-60 V Start-up voltage 22 V Max. input current 4 × 20 A Rated output current 10.43 A Peak efficiency >96.5% Protection rating IP67 Dimensions 352 × 225 × 38.5 mm Weight 5.5 kg Operating temperature -40 to 65 °C Warranty 15 years (optionally 25 years) Scope of delivery 1x SOSSEN Micro 2400 microinverter Who is it for? The inverter is designed for PV systems with up to four panels (400 to 750+ Wp per panel recommended). The BC01 connection cable is not included in the scope of delivery and must be purchased separately. The data sheet does not state a continuously variable power limit; it lists separate models for 1600, 2000, 2200 and 2400 W. Good to know When operated as a plug-in balcony power plant, the feed-in power is limited to 800 VA; throttling is done via app or software. Full power is only available for registered systems or in storage operation according to the requirements of your grid operator. Balcony power plants must be registered in the Marktstammdatenregister (German market master data register, MaStR). Installation and grid connection should be carried out by a qualified electrician. We are happy to advise you personally on selection and use: by phone at +49 931 760 260 40 or by email to kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
149,00 €
-
Growatt Growatt 1PH Hybrid Inverter MIN 3000TL-XH2
- 3 kW
- 2 MPPT
- 5-year warranty
The Growatt MIN 3000TL-XH2 is a single-phase hybrid inverter of the MIN 2500 to 6000TL-XH2 series for private photovoltaic systems. With 3000 W AC rated power and a recommended PV generator output of up to 6000 W, the model is suitable for compact solar systems with later storage expansion. Two independent MPP trackers allow separate design for different roof areas or module orientations. The XH2 series is prepared for compatible Growatt APX high-voltage batteries and, in the 3000 model, supports up to 6000 W charging power as well as 3000 W discharging power. The maximum efficiency of 98.2 percent, the DC Type II surge protection and the AFCI arc fault protection function support efficient and safe system operation. The compact, fanless housing with protection rating IP66, OLED display and optional WLAN and app connection makes installation, monitoring and operation easier.3000 W AC output with up to 6000 W recommended PV generator powerTwo MPP trackers with up to 16 A input current per trackerBattery ready for Growatt APX high-voltage storage systemsThe Growatt MIN 3000TL-XH2 combines 3 kW of inverter power with flexible storage connection and two independent MPP trackers. The compact design, protection rating IP66 and integrated protection functions make it a future-proof solution for single-phase photovoltaic systems.Scope of delivery: 1x Growatt MIN 3000TL-XH2 hybrid inverter, 1x wall bracket, 2x signal connectors, 2x PV plus connectors, 2x PV minus connectors, 3x plus metal contacts, 3x minus metal contacts, 1x AC connector, 2x release tools, 6x sealing plugs
429,00 €
-
Kostal KOSTAL PLENTICOIN Card EU excluding DE
The QR code on the PLENTICOIN card is used to retrieve activation codes for product extensions of KOSTAL inverters and wallboxes and can be redeemed in the KOSTAL Solar Webshop. This is asingle-purpose voucher.
138,00 €
-
Growatt Growatt 3PH Hybrid Inverter SPH6000TL3 BH-UP
- 6 kW
- 2 MPPT
- 10-year warranty
The Growatt SPH6000TL3 BH-UP is a three-phase hybrid inverter from the SPH BH-UP series, which replaces the older SPH series. It connects solar system, storage system and power grid and is suitable for large residential and small commercial PV systems. The maximum output power is 6 kW. It is suitable for solar systems with a maximum output of 9,000 W and fits all Growatt HV lithium home storage systems whose voltage range matches the battery voltage range of the device. Highlights Three-phase hybrid: Integration of solar system, storage and power grid 2 MPPTs: Connection of two solar panel strings Natural cooling: Less noise Convenience: Integrated LCD screen, adjustable charging and discharging times Monitoring: Online Smart Service with app, OSS system and web server; compatible with the ShineLink-X series Technical specifications Designation Value Model SPH6000TL3 BH-UP Phases three-phase Max. output power 6 kW Max. solar system power 9,000 W MPPTs 2 Battery voltage range 100 to 500 V Who is it for? The inverter is aimed at operators of large residential and small commercial PV systems with high-voltage storage; according to the description, all Growatt HV lithium home storage systems are compatible. The SPH6000TL3 BH-UP is one of the mid-range models of the series, which consists of several models from SPH4000 to SPH10000. According to the description, it is a popular choice among installers. Good to know Depending on the grid operator, inverters and storage systems should be properly registered, including in the Marktstammdatenregister (German market master data register, MaStR). Installation should be carried out by a qualified electrician. We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
1.028,00 €
-
Growatt Growatt 3PH Hybrid Inverter MOD 10KTL3-XH (BP)
- 10 kW
- 2 MPPT
- 10-year warranty
Battery-ready, future-proof Dual MPP trackers Type II SPD on DC and AC side With Back Up (BP) function 24-hour self-consumption monitoring
1.115,00 €
-
Growatt Growatt 3PH Hybrid Inverter MID 17KTL3-XH
- 17 kW
- 2 MPPT
- 10-year warranty
The Growatt MID 17KTL3-XH is a three-phase hybrid inverter for residential use. It exchanges energy with the power grid and can be integrated into a battery system. It is therefore aimed at homeowners who want to expand their photovoltaic system with a storage system or are planning to do so.Highlights Hybrid inverter: Suitable for exchanging energy with the power grid and for integration into a battery system. 2 MPP trackers: They ensure optimal performance of the solar modules, even with partial shading. High efficiency: Maximum efficiency of 98.75%. Weatherproof: IP66 classification protects against all weather conditions. Manageable weight: 31 kilograms; according to the description, the inverter can be installed by one person. MID KTL3-XH series: The series handles solar systems with an output of 3 to 30 kWp. Technical specifications Designation Value Model Growatt MID 17KTL3-XH Type 3PH hybrid inverter Number of MPP trackers 2 Maximum efficiency 98.75% Protection rating IP66 Weight 31 kilograms Series range solar systems 3 to 30 kWp Who is it for?The inverter is intended for residential use. In combination with a home battery system, the Growatt APX HV system (5 kWh ~ 60 kWh) works seamlessly with it, according to the description.Good to knowThe system must be registered in the Marktstammdatenregister (German market master data register, MaStR); additional requirements apply depending on the grid operator. Installation and grid connection should be carried out by a qualified electrician. We are happy to advise you on the suitable design.We are happy to give you personal advice: phone +49 931 760 260 40 or e-mail kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
1.413,00 €
-
Growatt Growatt 1PH Hybrid Inverter SPH4600 BL-UP
- 4.6 kW
- 2 MPPT
- 10-year warranty
The Growatt SPH4600 BL-UP 1PH hybrid inverter is part of the SPH BL-UP series, a series of inverters that replaces the older SPH series. This new series consists of six single-phase models, namely: SPH3000 BL-UP SPH3600 BL-UP SPH4000 BL-UP SPH4600 BL-UP SPH5000 BL-UP SPH6000 BL-UP Features of the Growatt SPH4600 BL-UP The Growatt SPH4600 BL-UP 1PH hybrid inverter is suitable for solar systems with a maximum output of 8,200 W. The maximum output power of this hybrid inverter is 4.6 kW. The battery voltage range for a home storage system is between 42 and 59 V, which makes all Growatt HV lithium home storage systems compatible. The Growatt SPH BL-UP series consists of single-phase hybrid inverters that are suitable for residential PV systems. The technology these inverters are equipped with ensures excellent integration of solar panels, storage systems and the power grid, which makes them a popular choice for many installers. Advantages of the Growatt SPH4600 BL-UP 2 MPPTs to connect two panel strings to the inverter. Natural cooling results in less noise. User-friendly thanks to a built-in LCD screen. Option to adjust charging and discharging capacities and times. Access to the Online Smart Service via an app, the OSS system and a web server. Compatible with the ShineLink-X series for monitoring. These features make the Growatt SPH4600 BL-UP an intelligent and efficient choice for anyone looking for seamless integration of renewable energy technologies.
828,00 €
-
Victron Victron MultiPlus-II 12/3000/120-32 230V
- 2.4 kW
- 5-year warranty
The Multiplus-II 12/3000/120-32 is a high-end combination unit from Victron Energy (MPN PMP122305010) that combines classic Multiplus components with an external current sensor and an integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50 A. The inverter module delivers a full 3000 W under non-linear load, or 2400 W under continuous linear load. The 12 V battery charger is also very well proportioned with a charging power of 120 A and is complemented by a 32 A transfer switch that allows lightning-fast switching between the AC connections. Key features of the Multiplus-II 12/3000/120-32 PowerControl and PowerAssist – boosting grid or generator power built-in anti-islanding function and connection option for an external current sensor (optional) can be used as a backup device in grid-connected systems to supply power during grid outages usable in various applications ideally suited for professional marine use, yachts, vehicles and land-based off-grid applications VE.Bus interface for parallel and three-phase operation, remote monitoring and system integration virtually unlimited power through parallel and three-phase operation can be configured on site or remotely using VEConfigure software* Technical features 3000 W power under non-linear load, 2400 W continuous load and 5500 W peak power for 12 V battery voltage, 32 A transfer switch and 120 A battery charger Output voltage: 230 VAC, frequency: 50 Hz max. efficiency is 93%, protection class IP22 Always enough power thanks to PowerControl and PowerAssist A maximum grid or generator current can be set on the Multiplus-II 12/3000/120-32. The MultiPlus-II then takes other connected AC loads into account and uses only the power that is still “left over” to charge the battery. This prevents the generator or the grid connection from being overloaded (PowerControl function). With the PowerAssist function, the PowerControl principle gains a new dimension. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus-II immediately compensates for weak generator, shore or grid power with energy from the battery. When the load is reduced, i.e. when loads are switched off, the energy that is then available again can be used to charge the batteries. Solar power: AC power even during a grid outage The unit can be used in both off-grid and grid-connected PV systems as well as in other alternative energy systems. It can be used with solar charge controllers as well as with grid-tied inverters. Maximum flexibility thanks to two AC outputs The main output ensures uninterrupted operation. In the event of a grid outage or an interruption of shore or generator power, the MultiPlus-II takes over the supply of the connected loads. The switchover occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is ensured. The second output only supplies power when AC power is available at the input of the MultiPlus-II. Loads that must not discharge the battery, such as a water heater, can be connected to this output. Many options for system expansion The settings can be changed within a few minutes using the VEConfigure software (a computer or laptop and an MK3-USB interface are required for this).Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, Digital Multi Control panel. Remote configuration and monitoring Install a Color Control GX or other GX products to connect to the internet. The operating data can be stored and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the internet, they can be accessed remotely and settings can be changed. Scope of delivery: 1x Victron PMP122305010 Multiplus-II 12/3000/120-32A1x User manual
1.166,00 €
-
Victron Victron SmartSolar MPPT 250/60-Tr
- 5-year warranty
The Smartsolar MPPT 250/60-Tr from Victron Energy belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer. The controller handles a full 60A of solar current and can work flexibly with 12/24/36/48 V batteries, at a maximum PV input voltage of 250V DC. Ultra-fast power tracking and automatic power point detection under partial shading are just 2 of the many highlights of this new class of device. In addition, this model supports parallel operation with other controllers of the same type. Compared with the Smartsolar 150/XX series, the 250/XX series can handle a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar controller family was able to raise efficiency by another 1 percent to a total of 99%, setting new standards across the industry. Of all the solar charge controllers we know, this is currently the best value. Compared with the BlueSolar family, the 250 Smartsolar series also has the Bluetooth module permanently integrated in the controller, which makes the Smart dongle unnecessary for this device if you want to analyse and configure the controller via Bluetooth using a smartphone or tablet. Also new is the optional LCD display, which can simply be plugged onto the SmartSolar 250/60-tr when needed. The display then provides all important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar charge controller. It safely covers the cable entries and connection terminals of the controller and protects them from external influences and accidental contact. Key product features of the SmartSolar 250/60-tr 60A 12V 24V 48V MPPT Victron Energy part number: SCC125060210 max. PV power: 12 V 860 W / 24 V 1720 W / 48 V 3440 W max. rated charging current 60A, 250V maximum PV open-circuit voltage ultra-fast latest-generation MPP tracker ensures the best possible yield even under overcast skies automatic detection of the MPP voltage under partial shading provides a further yield improvement compared with “simple” MPPT charge controllers with optional LCD display permanently integrated Bluetooth module for app-based analysis and configuration of the controller (via the free Victron app on compatible devices) optional LCD display available integrated VE.Direct data communication port for connecting accessories such as the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency of 99% parallel operation with other 250/85 controllers possible adjustable absorption charge voltage adjustable float charge voltage suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing integrated reverse battery polarity protection multi-stage and adaptive charging algorithm remote on/off switching possible via 2-pin connector protection rating IP 43 for the electronic components and IP 22 for the connection area of the controller integrated temperature sensor adjusts float and absorption charge voltage according to temperature day/night timer control and light dimming options Smart configuration and analysis via the Victron Connect app Modern Apple and Android smartphones, tablets, MacBooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point under partial shading In the case of partial shading, two or more points of maximum power (MPP) can be present on the current-voltage curve. Conventional MPPTs tend to settle on a local MPP, which may not be the optimal MPP. The innovative algorithm of the SmartSolar controller always maximises the energy yield by locking onto the optimal MPP. High-speed latest-generation MPP tracker Especially under overcast skies, when the light intensity changes constantly, an extremely fast MPPT controller increases the energy yield by up to 30 % compared with PWM charge controllers and by up to 10 % compared with slower MPPT controllers. Optional LCD display available for retrofitting If you prefer to operate and configure the Smartsolar MPPT 250/60-tr directly, you can retrofit the Smartsolar Control SCC900600010 display. The display allows simple configuration of the controller via keypad and also shows all important performance data at a glance. Comprehensive electronic protection protection against reverse battery polarity PV reverse current protection protection against overheating of the device protection against short circuits protection against reverse PV polarity The VE.Direct data communication port In text mode, VE.Direct transmits all important parameters every second to other devices coupled to the charge controller, making communication with accessories such as the GX Color Control system panel possible. The VE.Direct port is intended for products where full CAN bus integration (VE.Direct) would cause excessive costs. You can find more information about VE.Direct in our Victron Energy brand shop. Also available as a version with MC4 connectors The 250/60-tr is also available as a version with MC4 connectors on the solar side of the charge controller instead of screw terminals, which you can find here. Scope of delivery1x Victron SCC125060210 SmartSolar MPPT 250/60-Tr 12V 24V 48V 60A Charge controller1x user manual
376,00 €
-
Victron Victron Cerbo-S GX system monitoring
The Cerbo-S GX communication centre from Victron Energy gives you perfect control over your system and maximises its performance. Maximising system performance has never been so easy. The more cost-effective variant of the Cerbo GX series nevertheless offers all the important features for flawless communication, apart from the BMS-CAN port, temperature sensor inputs and resistive tank level inputs. Simple monitoring and control With the Cerbo-S GX you can monitor power consumption and energy generation from PV, generator and grid from anywhere in the quickest way. Easily control the current limit for shore power input, the (automatic) generator start/stop, or change any settings to optimise the system. Track alarms, run diagnostic checks and resolve problems remotely. Features of the Cerbo-S GX communication centre Easy control of your system Flexible connection options Maximise your system performance Straightforward installation Technical specifications Operating voltage: 8-70 V/DC Mounting: wall or 35mm DIN rail Dimensions: 78 x 154 x 48 mm Operating temperature range: -20 to +50°C Cable length: 2 metres Safety: IEC 62368-1 EMC EN: EN 301489-1, EN 301489-17 Available connections 3 VE.Direct ports 3 USB ports 4 digital inputs 2 relays 2 VE.BUS 2 VE.CAN Flexible connection options System control through the Cerbo GX communication centre is possible regardless of location and time. The device offers three different connection options: either via the free Victron Remote Management (VRM) portal, the Victron Energy GX Touch 50 (5-inch touchscreen display) or the VictronConnect app via Bluetooth. Scope of delivery: 1x Cerbo-S GX1x Power cable with inline fuse and M8 ring terminals for battery or DC busbar mounting.2x VE.Can terminators1x Terminal blocks for all connections on each side.
239,00 €
-
Victron Victron SmartSolar MPPT 100/50 50A 12V/24V Solar Charge Controller
- 5-year warranty
The Victron Energy SmartSolar MPPT 100/50 50A 12V/24V solar charge controller (MPN SCC110050210) is the new version of the BlueSolar 100/50. The Smart version differs from the Blue version mainly in its permanently integrated Bluetooth communication module. This allows the SmartSolar charge controller to be fully monitored and analysed on any app-capable device. The required Victron Connect app can be installed free of charge. The optional MPPT WireBox-M from Victron Energy is the ideal addition to your SmartSolar charge controller. It safely covers the cable entries and connection terminals of the controller and protects them from external influences and accidental contact. Key product features of the SmartSolar 100/50 50A 12V 24V MPPT ultra-fast latest-generation MPP tracker ensures the best possible yield even under overcast skies integrated VE.Direct data communication port high maximum efficiency of 98% for 12V and 24V systems integrated Bluetooth module 50A maximum charging current fully programmable charging algorithms that can later be activated and used manually via a switch on the housing 100V maximum PV open-circuit voltage 700W maximum PV power at 12V, 1400W at 24V systems integrated reverse battery polarity protection multi-stage and adaptive charging algorithm day/night timer control and light dimming option More protection compared with the smaller models of the SmartSolar MPPT seriesCompared with the 75/10, 75/15 and 100/15 models, the SmartSolar 100/30 MPPT features overheating protection with a shutdown function and automatic restart once a normal operating temperature is reached.VE.Direct data communication port In text mode, VE.Direct transmits all important parameters every second to other devices coupled to the charge controller, making communication with accessories such as the Victron GX Color Control Panel possible. The VE.Direct port is intended for products where full CAN bus integration (VE.Direct) would cause excessive costs. High-speed latest-generation MPP tracker Especially under overcast skies, when the light intensity changes constantly, an extremely fast MPPT controller increases the energy yield by up to 30 % compared with PWM charge controllers and by up to 10 % compared with slower MPPT controllers. In addition, the 100/50 offers several other innovative technologies such as the VE.Direct communication port. Options for programming, real-time data and history displayModern Apple and Android smartphones, tablets, MacBooks and other devices can be connected, for example, via the integrated Bluetooth Smart dongles and the MPPT app or the GX Color Control. Please note that Bluetooth Smart dongles and the GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as options.Flexible charging algorithmsFully programmable charging algorithm (please also see the software page on our website) and eight preprogrammed algorithms that can be selected using a rotary switch (further details can be found in our manual).Scope of delivery: 1x Victron Energy SCC110050210 SmartSolar MPPT 100/50 50A 12V/24V Solar Charge controller1x user manual
150,00 €
-
Victron Victron Smartsolar MPPT 75/15 15A 12V 24V Solar Charge Controller
- 5-year warranty
The Smartsolar 75/15 from Victron Energy is an MPPT solar charge controller with 15A max. charge current for charging 12V and 24V batteries. In contrast to the Bluesolar 75/15, the Smart version has integrated Bluetooth, which makes buying a Bluetooth dongle unnecessary. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control GX or the MPPT Control.The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT WireBox-S 75-10/15 from Victron Energy is the ideal addition for your SmartSolar charge controller. It safely covers the cable entries or connection terminals of the controller and thus protects them from external influences and contact.The most important technical features at a glance 15A max. charge current, suitable for 12V and 24V batteries nominal PV power for 12V systems: 220W nominal PV power for 24V systems: 440W 15A load output high peak efficiency of 98% freely programmable battery charging algorithm (via the free Victron Connect APP) Programmable light dimming functions (via the free Victron Connect APP) Ultra-fast Maximum Power Point Tracking max. PV open-circuit voltage: 75V Charging algorithm: multi-stage, adaptive integrated Bluetooth modu Ultra-fast Maximum Power Point TrackingEspecially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared with PWM charge controllers and by up to 10% compared with slower MPPT controllers.Smart load outputDeep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a specified voltage value. Alternatively, an algorithm for smart battery management can also be selected: see BatteryLife.The load output is short-circuit proof.Battery Life: smart battery managementIf the solar charge controller is not able to charge the battery to its full capacity within a day, the battery's status constantly switches back and forth between "partially charged" and "end of discharge". This operating mode (no regular full charging) damages a lead-acid battery within a few weeks or months.The Battery Life algorithm monitors the battery's state of charge and, if necessary, raises the threshold for disconnecting the load day by day (i.e. the load is disconnected earlier) until the energy gained is sufficient to charge the battery to almost 100%. From this point on, the threshold for switching off the load is modulated so that charging to almost 100% is achieved about once a week. Number of charging outputs: 1 Adjustable battery type: Supports all common battery types Standby self-consumption: 10mA Warranty: 5 years Weight: 0.5 kg Manufacturer: Victron Energy Charge controller type: MPPT Product type 1: MPPT charge controller 15A for 12V and 24V batteries with integrated Bluetooth and extensive setting options as well as a smart load output. Protection rating (IP): IP43 (electronic components) IP22 (connection area) Protective functions: Battery reverse polarity (external fuse), output short circuit, overtemperature Solar module current (max.): 15A Ambient temperature: -30°C - +60°C Scope of delivery:1x Victron Energy Smartsolar MPPT 75/15 15A 12V 24V Solar Charge Controller1x user manual
59,99 €
-
Hoymiles HOYMILES HMT-2250-6T 3F Inverter
- 2.25 kW
- 12-year warranty
Product specification: Maximum power of the connected photovoltaic system: 470W DC start-up voltage: 22V Maximum input current: 6 * 11.5 A Maximum AC power: 2250W Sealing class: IP67 Standard manufacturer's guarantee: 12 years Option to extend the warranty to 25 years (price: 30% of the product value)
376,00 €
-
Growatt Growatt 1PH Hybrid Inverter MIN 2500TL-XH2
- 2.5 kW
- 2 MPPT
- 5-year warranty
The Growatt MIN 2500TL-XH2 belongs to the single-phase MIN 2500 to 6000TL-XH2 series for residential photovoltaic systems. The series is designed to be battery ready and allows a compatible Growatt high-voltage storage system to be integrated later. The model provides 2,500 W AC rated power and supports a recommended PV generator power of up to 5,000 W. Two independent MPP trackers with 16 A input current each allow flexible design on different roof areas. The inverter achieves a maximum efficiency of 98.2 percent, while the series reaches up to 98.4 percent depending on the power class. The compact IP66 housing, natural convection cooling and the integrated Type II surge protection on the DC side support reliable operation.Battery ready for compatible Growatt high-voltage storage systems2 MPP trackers with up to 16 A input current each2,500 W AC rated power with up to 98.2 percent efficiencyThe Growatt MIN 2500TL-XH2 is a compact single-phase hybrid inverter for smaller photovoltaic systems. It combines flexible PV design with storage capability, modern monitoring and a weather-protected housing.Scope of delivery: 1x Growatt 1PH Hybrid Inverter MIN 2500TL-XH2
399,00 €
-
Growatt Growatt 1PH Inverter MIC 1000TL-X2
- 1 kW
- 1 MPPT
- 10-year warranty
The Growatt MIC 1000TL-X2 is a single-phase string inverter from the Growatt MIC-X2 series for small private PV systems. The series is designed for a compact design, simple mounting and quiet operation thanks to natural convection cooling. The model offers 1000 W AC rated power and, according to the manufacturer, is intended for a recommended PV power of 1500 W. With one MPP tracker, 50 V start-up voltage and 500 V maximum DC voltage, the inverter is suitable for smaller module strings. The IP66 housing allows protected use indoors and outdoors. OLED display, touch operation, RS485 and USB as well as optional communication modules support simple monitoring of the system. 1000 W AC output with 1500 W recommended PV power 1 MPP tracker with 16 A input current IP66 housing, OLED display and natural convection cooling The Growatt MIC 1000TL-X2 is a compact solution for small single-phase PV systems with one module string. The MIC-X2 series combines simple installation, solid protection functions and flexible monitoring options for private solar systems. Scope of delivery: 1x Growatt MIC 1000TL-X2 inverter, 1x mounting bracket, 1x Quick Guide, 1x signal connector
194,00 €
-
Growatt Growatt 1PH Inverter MIC 800TL-X2
- 800 W
- 1 MPPT
- 10-year warranty
The Growatt MIC 800TL-X2 is a compact single-phase string inverter with 800 W AC rated power and one MPP tracker. It is transformerless, convection-cooled and has an OLED display with touch button. Highlights Compact: Weighs only 6 kg, housing with protection rating IP66. High input current: One MPP tracker with up to 16 A input current. Efficiency: Maximum 97.4%, European efficiency 96.5%. Safety: DC isolating switch, reverse polarity protection, Type III surge arrester and residual current monitoring. AFCI function: Arc detection available, to be activated after installation. Communication: RS485 and USB integrated; WLAN, GPRS, RF or LAN optional. Technical specifications Designation Value AC rated power 800 W / 800 VA Max. PV power (STC) 1200 W Max. input voltage 500 V Start-up voltage 50 V MPPT voltage range 50–500 V Max. input current per tracker 16 A AC rated voltage 230 V (180–280 V) Max. efficiency 97.4% Operating temperature -30 to +60 °C Dimensions (W x H x D) 274 x 254 x 138 mm Weight 6 kg Warranty 10 years Scope of delivery 1× Growatt MIC 800TL-X2 inverter 1× mounting bracket 1× Quick Guide 1× signal connector Who is it for? For small private PV systems with a single-phase grid connection and one module string of up to approximately 1200 W, where a quiet, low-maintenance inverter with monitoring options is desired. Good to know Connection and commissioning must be carried out by a qualified electrician; registration with the grid operator and in the Marktstammdatenregister (German market master data register, MaStR) is the operator's responsibility. We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop.
199,00 €
-
GoodWe GoodWe ET G2 Series GW15K-ET-20
- 15 kW
- 3 MPPT
The GoodWe GW15K-ET-20 is a three-phase high-voltage hybrid inverter of the ET G2 series with 15000 W rated power. It connects photovoltaics, battery storage and the grid and offers a backup power function for selected consumers. The information is taken from the series data sheet and refers to this model.HighlightsBackup: Switchover to emergency power in under 10 ms; backup rated power 15000 VAHybrid: Connection of a high-voltage battery storage system with 150 ~ 720 VFlexible: 3 MPP trackers with one string each; up to 160% PV oversizingExpandable: Parallel connection of up to 4 devices possibleRobust: Protection rating IP66, cooling by natural convection, Type II surge protection (DC and AC)Technical specificationsDesignationValueAC rated power15000 WNumber of MPP trackers3Max. PV input power24000 WMax. charge/discharge power24000 W / 16500 WBackup rated power15000 VABackup peak without grid18000 VA (60 s)Max. efficiency98.2%Battery voltage range150 ~ 720 VMax. DC input voltage1000 VMPPT operating voltage range120 ~ 850 VMax. input current per MPPT16 AProtection ratingIP66Operating temperature-35 ~ +60 °CDimensions (W × H × D)496 × 460 × 221 mmWeight25 kgScope of delivery1x GoodWe GW15K-ET-20 hybrid inverterWho is it for?The GW15K-ET-20 is aimed at homeowners with a three-phase grid connection who want to plan or expand a PV system with high-voltage storage. Important for planning: the battery input works in the range of 150 ~ 720 V; the battery is not included in the scope of delivery. According to the data sheet, the unbalanced output (up to 150%) is only supported by the GW6K, GW8K and GW10K-ET-20 models, not by this model. We are happy to help you with the string design.Good to knowInstallation and grid connection should be carried out by a qualified electrician; registration obligations depend on the requirements of your grid operator.We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
1.415,00 €
-
GoodWe GoodWe SMT Series GW80K-SMT
- 80 kW
- 6 MPPT
The GoodWe SMT series (e.g. GW80K-SMT) is a range of three-phase string inverters for commercial and industrial applications with high power density and six MPPTs. It supports DC input overvoltage of up to 150% (up to 180% depending on the model) and thus allows an oversizing design to increase yield. For safety, the device protects on both the DC and AC side with surge protection (Type II), supplemented by optional functions such as AFCI. The device is weatherproof according to protection class IP66 and suitable for outdoor mounting. Communication takes place via interfaces such as RS485, WiFi, LAN or 4G and offers options for remote monitoring and control via GoodWe platforms. The inverter is designed for high efficiency (up to 98.6%) and large PV modules (182/210 mm), which makes it attractive for modern large-scale systems.Six MPPTs for optimising several module stringsHigh efficiency of up to 98.6% with a robust protective design (IP66)DC input overvoltage (oversizing) of up to 150% / 180% (depending on model)The GoodWe GW80K-SMT is a powerful three-phase string inverter with high safety standards, high efficiency and flexible PV string configuration. It is designed specifically for commercial PV systems and supports oversizing as well as modern communication functions.Scope of delivery: 1x GoodWe GW80K-SMT inverter
2.805,00 €
-
Sossen SOSSEN 800W Microinverter incl. Wi-Fi
- 800 W
- 12-year warranty
The SOSSEN microinverter with 800 W output power offers a powerful and reliable solution for balcony and small systems. Thanks to its compact design, high efficiency and modern communication interfaces, it is ideally matched to the requirements of contemporary photovoltaic systems. With integrated Wi-Fi and Bluetooth, the inverter can be conveniently monitored via smartphone app (TUYA-compatible). Thanks to a maximum input current of 20 A, the device is particularly suitable for high-performance solar panels of up to 540 Wp. The inverter meets all requirements of VDE-AR-N 4105 and is doubly protected by an integrated relay circuit. The IP67 protection rating ensures safe outdoor use in all weather conditions. Product features: 800 W output power for grid-connected small systems and balcony power plants Integrated Wi-Fi and Bluetooth function for convenient remote monitoring Maximum 20 A PV input current, ideal for modern high-performance panels MPP tracking efficiency of 99.5% for optimal energy yield Double protection with integrated relay, compliant with VDE-AR-N 4105 Protection rating IP67, fully weatherproof and suitable for outdoor use Fanless design – silent operation through natural convection Compatible with the TUYA Smart Home app for real-time monitoring Upgradable to 1000 W, future-proof through easy power adjustment 12-year manufacturer's guarantee for long-term investment security
85,00 €
-
Kostal KOSTAL PLENTICORE M G3
- 8.5 kW
- 3 MPPT
The KOSTAL PLENTICORE G3 is a transformerless inverter with 3 MPP trackers. It can be used universally as a solar, hybrid or battery inverter with base outputs of AC 4.0 (S) / 8.5 (M) / 15.0 kW (L). The output can optionally be extended with 1 - 2x Plenticoin.The battery input can be added later with 3x Plenticoin via the 3th MPP tracker, which allows a compatible HV storage unit to be connected. Prepared for additional battery charging via AC energy sources (e.g. for KOSTAL Double Power). Emergency power operation can be implemented with the KOSTAL BackUp Switch G3 (08-000747) manual changeover switch or via the enwitec KOSTAL 3P 35kW (08-000772/773) grid changeover box. 4 digital outputs for load control or event signalling, SG Ready compatible Free monitoring via the KOSTAL Solar Portal and Solar AppWith the KOSTAL DC surge protection module G3 (08-000746), direct integration of a surge protective device is possible.
2.024,00 €
-
Growatt Growatt RS485/CAN
The Growatt RS485/CAN product is a battery communication junction box with 8 connection ports.
14,00 €
You have seen 48 out of 211 products