Description
This EVlink Pro AC product is a wall-mounted charging station for all electric vehicles in accordance with the IEC 61851-1 standard. Installation on the floor is also possible, either attached to a stand or integrated into a housing kit. Stand and housing kit must be ordered separately. Installation indoors and outdoors possible. The IP protection class is IP55. The IK protection class is IK10.
The operating temperature is between -30 °C and 45 °C. The storage temperature is between -40 °C and 80 °C. The output type is a T2 socket with flap (T2S) which is attached to the front of the station. All contacts of the T2S socket are silver plated to prevent overheating. The nominal output power is 7.4 kW. Single phase (1P+N) supply. The nominal charging current is 32 A at 220 V to 240 VAC at a frequency of 50 Hz to 60 Hz. Can be used with TT, TN-S or TN-CS earthing system. IT compatible with additional isolation transformer in the power supply. The charging station is easy to install and commission. Recommended for apartment buildings, vehicle fleets, on the road or in the workplace. The dimensions are (W) 317 mm x (H) 529 mm x (D) 153 mm. The product weight is 7.2 kg.
The color is dark gray (RAL 7016). Included is built-in protection against residual direct current with 6 mA residual direct current detection (RDC-DD) and a 30 mA residual current device (RCD) of type A-Si. For safety reasons, an MNx undervoltage release is also integrated in the charging station. In addition, the EV Ready requirements must be met. In addition, an MID energy meter with accuracy class 1 is integrated in the charging station. The charging station can be fed by a cable that runs from the back, top or bottom. For charging electric vehicles, access control is carried out by user authentication using an RFID or NFC card. The charging station can also be used freely. The charging process can be started with a time delay. During the charging time, the power can be limited to ensure service continuity and to optimize the charging time of all charging stations based on the same power supply.
Two Ethernet RJ45 inputs for LAN connection. Parameters are set using the eSetup app via Bluetooth or EcoStruxure EV Charging Expert. The charging station can be managed in standalone or clustered architecture. The OCPP 1.6 communication protocol is used to connect to the monitoring device. The available services are CDR, diagnostic capabilities and charging management. The charging station has CE and EV Ready certification.
