Victron Energy is a renowned provider of energy solutions known for its high -quality inverter and solar loader. Victron's products are characterized by their reliability, simple integration into existing systems and their ability to manage high performance peaks.
The Multi RS Solar 48/6000/100-450/100 Dual (MPN PMR482602020) from the renowned product range from Victron Energy combines the functions of a hybrid inverter and a battery charger in an extremely powerful combination of devices in order to fulfill your energy requirement efficiently and reliably. In mid-2023 the original single-Mppt-tracker to this dual-Mppt-Tracker model with two independent Mppt-tracker inputs for a total of 6 kWp PV performance further developed. Thanks to high-frequency technology and new design, the powerful device combination only weighs 11 kg, has an excellent efficiency, a low standby performance and is also very quiet in operation. Dual model with 4 operating modes Hybrid mode: Save excess solar energy in a battery to use it at night or in times of high demand. Delivers additional electricity from the battery if the need exceeds the network capacity. Reserve mode: Switch to reserve mode during a network failure. Network -independent mode: Works without a network connection. Generator mode: Controls the generator to minimize the term. Delivers additional electricity from the battery if the need exceeds the capacity of the generator. The Victron Multi RS Solar Hybrid inverter/charger Dual-Mppt-Tracker and 6000 VA performance Efficient battery charge, pulse width modulation (PWM) Protection functions: FKS device protection Masterbus compatible: integration into energy management systems Versatile applications Programmable relay Energy optimization through back feed User -friendly, intuitive display Powerful and flexible The state -of -the -art device combination offers an impressive peak output of 6000 VA (watt), which even copes with demanding applications such as the power supply of household appliances, office equipment or electric vehicles. It not only offers a reliable power supply, but also enables you to resort excess energy into the batteries and thus increase your own consumption. With an input voltage of 48 V and a charging current of 100 A, this device enables quick and efficient charging of your batteries. The integrated pulse width modulation (PWM) for the charging voltage control ensures the optimal load of your batteries, while the FKS (Fast-Blow Fuse) device protection protects the device and your energy system from overload and short circuit. PowerControl and Power Assist The PowerControl function limits the maximum network or generator current to get the Multi RS into account for other AC loads. As a result, it only uses excess electricity to load the battery, which prevents overload. The Power Assist function ensures that batteries are immediately supported during short-term load tips and charged with reduced load. Easy operation and monitoring With a user-friendly display and an intuitive user interface, you can easily monitor and adjust the operating status and settings, as well as the battery, inverter and solar parameters, the Victron Multi RS Solar 48/6000/100-450/1 100 dual. Thanks to the master bus compatibility, you can seamlessly integrate the device into an intelligent energy management system and also control several devices with a smartphone or another Bluetooth-enabled device via the VictronConnect app. Technical data: Inverter: DC input voltage area: 38-62 V AC output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0.1 % Max. Permanent current: 25 a ac Max. Output power: 5300 W at 52 VDC Top performance: 9 kW for 3 S /7 kW for 4 min Short -circuit output current: 45 a Max. Overflow protection of the AC output: 30 a Efficiency: 96.5 % at 1 k W load Solar: Max. PV lerial voltage: 450 V Consider voltage: 120 V Mppt-Operating voltage range 80-450 V Max. Operational PV input power limitation: 13 a Max. PV conversion performance: Insp. 6 KW - 3KW pro tracker Max. PV short-circuit current: 16 a Earth closing outlet: 30 mA Isolation failure level: 100 kΩ Charger: Nominal voltage: 230 VAC Input voltage area: 187-265 VAC Nominal frequency: 50 Hz Input frequency: 45-65 Hz AC hint power: N.Z. Programmable charging range area: 36-60 V Charging voltage "constant voltage": 57.6 V (adjustable) "Conservation" charging voltage: 55.2 V (adjustable) Max. Charging current from AC: 88 A @ 57.6 VDC Max. Charging current Insurance (AC+PV): 100 A DC Battery temperature sensor: included Battery spanning sensor: yes General: Additional outcome (AC-out-2): Yes Three-phase and parallel operation: 2x 2023 Q4 Connections: ve.direct, ve.can & bluetooth Bluetooth frequency and performance: 2402–2480 MHz, 4 dbm Operating temperature range -40 to +65 ° C Maximum height 2000 m Air humidity: max. 95 %not condensing Protection class: IP21 Battery connection: M8 bolt PV connection: 2 strings with MC4 230VAC connection: screw terminals 10 mm² (6 AWG) Dimensions: 425 × 460 × 125 mm Weight: 12.3 kg Scope of delivery: 1 × Victron Multi RS Solar 48/6000/100-450/100 Dual
€1.716,00
The Blue Smart IP 67 12/7 12v 230V battery charger from Victron Energy (MPN BPC120713006) is a smart, high-performance battery charger of the latest generation with 7A loading current for charging 12V AGM, gel and bleeding batteries as well as lithium ion batteries. In terms of function, the Blue Smart IP67 series is identical to the chargers of the Blue Smart IP 65 and IP 22 device families. Only the application environment for which these chargers are designed differ.Thanks to the integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and electricity, for adapting settings and updating the charger when new functions are available.Important features of the Blue Smart IP67 12/7 Battery charger Victron part number: BPC120713006 Model description: Blue Smart IP 67 12/7 Max. Charging current: 7a For battery voltage: 12V DC For mains voltage: 180-265 VAC 45-65 Hz Completely covered: waterproof, push -in and fire -retardant Smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage loading algorithm extends the life of your batteries thanks to the integrated warehouse mode can be used to supply 12V consumers High quality housing made of cast aluminum Protection against application errors: Polation on battery (fuse), protection against over temperature, protection against the start of the start Completely covered: waterproof, shock -protected and fire -retardantWater, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are covered with resin.One of the highest level of loading effects of all time!Set a new industrial standard: With an efficiency of at least 92 % or more, these chargers produce three to four times less heat.Adaptive 5-stage loading algorithmThe Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. "Bulk" (constant trump phase) "Absorption" (constant voltage phase) "Recondition" (regeneration phase) "Float" (loading tension phase) "Storage" (warehouse mode) Warehouse mode: Less maintenance and aging in the resting state of the batteryThe warehouse mode is always activated if no discharge has been carried out within 24 hours. In storage mode, the loading tension is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) in order to minimize gas development and corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Significant differences to the Blue Smart IP 65 familyThe two device groups differ in the following points: The type of protection, the IP 67 devices have the best possible protection Blue Smart IP 65 Retäte have a 7-stage loading algorithm, in the IP67 it is 5-stated Scope of delivery:1x Victron BPC120713006 Blue Smart IP67 12/7 7a 12V 230V Battery charger1x operating instructions1x 1.5m battery connection cable red/black
€101,00
The Victron Orion-Tr 48/12-9 (MPN Ori481210110) is an isolated DC DC voltage converter and ensures a regulated DC voltage and thus for the trouble-free operation of your DC consumers. The device converts the DC input voltage (32-70V) into a adjustable 12V output voltage (10-15V) and delivers a constant permanent current of 9a, which corresponds to an output of 110W. So you can supply every 12V consumer with exactly the right voltage. With many sensitive electronics devices, compliance with the exact operating tension is essential for an impeccable function. The Orion-TR 48/12-9 also dominates the parallel circuit with identical devices and has a remote-controllable input switch. Important features of the Orion-Tr 48/12-9 110W (with a galvanic separation) 48V DC Operating voltage, controllable 12V output voltage 10-15V can be switched in parallel with similar devices for increasing performance Remote control on and off switch Protection class IP43 Wide input voltage area: 32V - 70V 110W power at 9a permanent current Max. 12.5A output current high efficiency of 87% only 0.42 kg weight Not suitable for charging batteries. Please consider the use of an Orion-Tr Smart to charge the batteries. DC-DC DC converters of the Orion Family generate a clean output voltage in the range of 10-15V DC and the same possible line losses from a 48V power source as fluctuations in battery voltage. Remote-controllable ON/OFF switchesDue to the remote control in/out connection, no high current switch in the input cabling is no longer necessary. The remote control in/out connection can be controlled with a power saving switch or by the run/stop switch of the engine (see manual). Can be switched in parallel to increase the output current Unlimited many, identical devices can be switched in parallel to increase the output power. Scope of delivery:1x Victron Energy Ori481210110 Orion 48/12-9 DC DC converter 48V to 12V (10-15V regulable) 9a 120W
€68,00
The SmartSolar Mppt 250/85-TR from Victron Energy (MPN SCC125085210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. This model also dominates parallel operation with other controls of the same type. Compared to the SmartSolar 150/..... series, the 250/.... series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/85-TR 85A 12V 24V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Max. PV performance: 12V 1200W / 24V 2400W / 48V 4900W max. Max. PV input current: 250 volt integrated VE.Direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/85-TR prefer to use and configure, which can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The devices of classes 250/60-TR up to 250/100-TR are also available as a version with MC4 connections on the solar page of the loader instead of the screw clamps. Scope of delivery1x Victron SCC125085210 SmartSolar Mppt 250/85-TR 12V 24V 48V 85A Loader1x operating instructions
€498,00
The Victron Mppt 150/35 (MPN SCC020035000) belongs to the big family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. In addition to the larger loading and PV performance, this Blue differentiates even more from the next smaller model, the 100/30. Because the area of the battery voltage has also risen with the smallest 150 model so that 48V batterys can also be used.VE-DIRECT options for programming, data in real time and display of the course Modern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.High-speed Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 150/35 has some other innovative technologies such as Ve.direct Communication.Extensive electronic protection- Protection against the polished battery connection- PV backstream lock- Protection against overheating of the device- Protection before short circuits- Protection against the PV connection, PV connectionEssential product features of the Bluesolar 150/35 35a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 35a, 150V maximum PV empty voltage 12V: 500W/24V: 1000W/36V: 1500W/48V: 2000W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and lighting option Ve.direct data communication sportVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world.Scope of delivery1x Victron SCC020035000 Bluesolar Mppt 150/35 12V 24V 36V 48V 35A LoaderOperating instructions
€152,00
The Victron Phoenix 12/800ve.direct (MPN PIN121800200) is a small sinus inverter with 700W permanent output. The device converts 12V DC voltage from your battery into 230V AC AC, with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products. directional efficiency and modern system communicationThe efficiency of the Phoenix is excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter. The scope of the PHOENIX series Ve.direct 12/800 is currently unique on the market for the price and goes far beyond the skills of other devices from the same performance classes.Technical features of the Phoenix 12/800 Ve.direct 700 watts of continuous power at 230V 50Hz sinus voltage 800 watt continuous output with non -linear load full control over almost all system parameters Suitable for all common 12V batteries 230V AC electricity with pure sinus shaft provides perfect power quality freely programmable input and offset swells freely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 800VA Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free VICTRON app (Ve.direct Bluetooth Smart Dongle required). Fully programmable parameters: threshold values for triggering and resetting alarms with a low loading status of the battery + swelling values for switching off and restarting at low battery voltage values + output voltage 210 - 245V + swelling values for switching off and restarting at low battery voltage values + frequency 50 Hz or 60 Hz + swelling value for ECO mode on/off and Eco mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature). High switch-on power: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools. Remote-controlled insert/off connection possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug. Scope of delivery:1x Victron Pin121800200 Phoenix 12/800 12V on 230V 700W 50Hz 60Hz
€229,00
The Victron Energy Ve.Bus BMS V2 (MPN: BMS300200200) is the next generation of VE.Bus BMS for Victron Lithium Smart Batteries (LFP-Smart) 12.8V and 25.6V. Each single cell of a Lifepo4 battery must be protected against overvoltage, undervoltage and over temperature. The Ve.Bus BMS V2 takes over exactly this task. The product is suitable for protecting 12V, 24V and 48V batterys and works in a operating voltage range of 9 - 70 VDC. VE-BUS BMS V2 in interaction with Victtrons Lifepo4 Batteries Victron LIFEPO4 batteries have a built-in cell compensation, temperature and voltage control (short brief designation: BTV) You will be connected to the VE.BUS BMS V2 via two M8 round connector cable sets. The BTVs of several batteries can be chained together. They can be switched in series, parallel and in a row and in parallel, which means that a battery range of 12V, 24V or 48V can be interpreted. Up to 20 batteries in one system are possible, which leads to an energy storage of max. 84KWH in a 12V system and 102kWh in a 24V and 48V system. For more details, please refer to the technical documents for our Lifepo4 battery. Core tasks of the Victron Ve.Bus BMS V2 Specially developed for use with Victron Lithium Battery Smart 12.8 V & 25.6 V batteries. Communicates directly with the lithium battery via the M8 circuit connecting cable of the battery Switch off or separate from VE.Bus inverter or inverters/chargers via Ve.bus and other loads via the terminal "load", in the event of a cell subtle voltage Switch off or separate from Ve.Bus inverter or inverters/chargers via Ve.bus, Ve.Direct and Ve.can solar charyer via a GX device and other chargers via the terminal "separate", in the case of a cell overvoltage, lower temperature or over temperature. Difference to the Ve.Bus BMS The VE.Bus BMS V2 was specially developed for use in systems with GX devices and is therefore perfect for eating or backup applications with a battery capacity of up to 84KWH (12V) or 102KWH (24V/48V).The BMS V2 also has a remote contact for remote control (on/off). Communication with Ve.Bus products Multiplus, Quattro or Phoenix inverters are connected to the "Multiplus/Quattro" connection with a standard RJ45 UTP cable.The BMS deactivates the inversion in the event of an undervoltage of the cell and loading in the event of overvoltage or over temperature of the cell Communication with remote control devices A GX device (e.g. Cerbo GX), a digital multi control (DMC) panel or a Ve.Bus Smart Dongle (including any combination) can be connected to the BMS via the "Remote control panel". This accessories can be used in combination with the BMS to controll the switching condition of the VE.Bus inverter or the inverter / charger (one / only / only charger) Clamps for additional inputs and outputs The BMS has a special power output (GX-Power) for a GX device and an additional power input (AUX-in) for an external DC source, e.g. B. a network adapter. In the event of a system shutdown, the GX device is further supplied with electricity to prevent a further unloading of the battery via the auxiliary voltage receipt or separated from the network Technical data Input voltage area: 9-70VDC Electricity intake - regular operation: 10mA (load cutting current not enclosed) GX-Pow output: 1A Aux-in input: 1a Ve.Bus interface: 2x RJ45 sockets for connection to all Ve.Bus products Operating temperature range: -20 ° C - +50 ° C Moisture: Max. 95% (not condensing) Protection class: IP20 Weight: 120gr Dimensions: 105.5 x 94.5 x 23.8 mm Scope of delivery: 1x VICTRON Energy BMS300200200 VE.Bus BMS V2 Battery Management System1x operating instructions
€167,00
The EV charging station of Victron Energy is both 3-phase and 1-phase. It delivers a maximum of 22kW AC in 3-phase mode or 7.3kw in 1-phase mode. With the integrated LCD touchscreen, the station can be monitored and controlled. An external fault current circuit breaker is required to secure (not included in the scope of delivery). A cable cross -section of 6mm² is recommended for the installation line. An electrical specialist should be consulted for connection. Important properties High charging power Wi-Fi communication LCD touchscreen Leuchtring for the quick display of the device status Configurable price/kwH-Computer Two working modes available Integration with GX devices possible Integration with VRM portal possible Two working modes to choose from You can between manual and automatic mode. The automatic mode recognizes when excess energy is available and only uses this energy to charge the vehicle. The manual mode enables a configurable output current between 6-32a. The charging capacity can be controlled either via the slider on the LCD touchscreen or via the website. It enables the loading process to start or stop manually when a vehicle is connected to the charging station. Programmable light ring The fully programmable light ring around the loading connection quickly and easily delivers the current device status. It can be programmed via the web interface so that depending on the current condition (charging, loading, separated, separated, etc.), different lighting effects are displayed. This enables the user to recognize the current charging status from a distance. 55 different lighting effects are available. Technical data Input voltage area: 170-265 V/AC Nominal charging current: 32a / phase Nominal output: 22kW Power output area: 6-32a Self -consumption: 15mA at 230V Operating temperature range. -25 ° C - +50 ° C Protection class: IP44 Weight: 3kg Dimensions: 390 x 300 x 150 mm Scope of delivery: 1x Victron Energy EV charging station
€510,00
The SmartSolar Mppt 150/85-TR from Victron Energy (MPN SCC115085411), belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. The devices of classes 150/45TR to 150/100-TR are also available as a version with MC4 connections on the solar side of the loading control instead of screw clamps. This model also dominates parallel operation with other controls of the same type. Compared to the Bluesolar series, the Bluetooth module is already integrated in the controller at the SmartSolar family, which makes the smart dongle superfluous in this device. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 150/85-TR 85A 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct & Ve.CAN data communication sport for connection with additional devices with additional devices to the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 85a, 150V maximum PV empty voltage Maximum PV power: 12V 1200W / 24V 2400W / 48V 4900W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart data communication via VE.Direct and lightning-fast Bluetooth module Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar device will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC115085411 SmartSolar Mppt 150/85-TR 12V 24V 36V 48V 85A LoaderOperating instructions
€410,00
The Victron Phoenix 12/1200ve.direct (MPN PIN122120200) is a small sine inverter with a continuous output. The device converts 12V DC voltage from your battery into 230V AC AC, with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products.directional efficiency and modern system communicationThe efficiency of the Phoenix is excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter.The scope of services of the Phoenix series VE.Direct 12/1200 is currently unique on the market for the price and goes far beyond the skills of other devices from the same performance classes.Technical features of the Phoenix 12/1200 Ve.direct 1000 watts of continuous power at 230V 50Hz sinus voltage 1200 watt continuous output with non -linear load full control over almost all system parameters Suitable for all common 12V batteries 230V AC electricity with pure sinus shaft provides perfect power quality freely programmable input and offset swells freely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 1200VA Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free VICTRON app (Ve.direct Bluetooth Smart Dongle required). Fully programmable parameters: threshold values for triggering and resetting alarms with a low loading status of the battery + swelling values for switching off and restarting at low battery voltage values + output voltage 210 - 245V + swelling values for switching off and restarting at low battery voltage values + frequency 50 Hz or 60 Hz + swelling value for ECO mode on/off and Eco mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).High switch-on power: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.Remote-controlled insert/off connection possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug.Scope of delivery:1x Victron Pin122120200 Phoenix 12/1200 12V on 230V 1000W 50Hz 60Hz
€303,00
The Victron Mppt 100/50 (MPN SCC020050200) belongs to the big family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. In addition to the larger loading and PV performance, this Blue differentiates even more from the next smaller model, the 100/30. More protection compared to the smaller models of the Blursolar Mppt series Compared to the 75/10, 75/15 and 100/15 model, the Bluesolar 100/50 has Mppt Via overheating protection with a switch-off function and automatic recovery after reaching a normal operating temperature. In addition, a PV backstream protection exists from this device in the Blue Mppt Family can be found.High-speed Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 100/50 has some other innovative technologies such as VE.Direct Communication.Options for programming, data in real time and display of the courseModern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Essential product features of the Bluesolar 100/50 50a 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 50a, 100V maximum PV empty voltage 700W maximum PV power at 12V, 1400W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and lighting option Ve.direct data communication sportVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete canbus integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world.Scope of delivery1x Victron SCC020050200 Bluesolar Mppt 100/50 12V 24V 50A LoaderOperating instructions
€152,00
The Blue Smart IP22 12/30 (3) charger from Victron Energy (MPN BPC123044002) is a professional, compact 12V 30A battery charger of the latest generation with 3 charging outputs and built -in Bluetooth! The Blue Smart IP22 12/30 (3) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/30 (3) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-discharged batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 12/30 (3) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 12/30 (3) Blue Smart IP22 Charger Victron part number: BPC123044002 Lades 12V lead-acid, gel, agm and lithium batteries 30a maximum charging current 3 battery charging outputs Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other performance features of the 12/30 (3) Blue Smart IP22 Batterieladers Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 12/30 (3) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 12V battery) in order to minimize the gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC123044002 12/30 (3) IP22 Blue Smart Charger 1x operating instructions
€221,00
The SmartSolar 100/15 from Victron Energy (MPN SCC110015060R) is one Mppt Solar Loader With 15a max. Charging current for charging 12V and 24V batteries. In contrast to the Bluesolar 100/15, the Smart version has integrated Bluetooth, which makes buying a Bluetooth dongels superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection.The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 100-15 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch.The most important technical properties at an overview 15a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 220W Nominal PV performance at 24V systems: 440W 15a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 100V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth module Ultra -fast Maximum Power Point TrackingEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %.Intelligent load exitA deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof.Battery Life: Intelligent battery managementIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-acid battery within a few weeks or months.The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery:1x Victron Energy SCC110015060R SmartSolar Mppt 100/15 15a 12V 24V solar Loader1x operating instructions
€76,00
The Victron Orion 24/12-20 240W (MPN ORI241220200R) DC DC converter ensures a regulated DC voltage and thus a fault-free operation of your electronic DC consumers. The 24/12 converts 24V direct current into 12V DC and delivers a constant permanent current of 20a which corresponds to an output of 240W. It delivers a clean 12V output voltage and compensates for any line losses and fluctuations in battery voltage. Important features of the Orion-Tr 24/12 20a 240W 24V DC operating voltage, 12V DC output voltage Wide input span area: 18V - 36V 240W power at 20A permanent current Version not isolated Scope of delivery:1x Victron Ori241220200R Orion 24/12-20 DC DC converter 24V on 12V 20A 240W
€51,00
The Victron Mppt 150/45 (MPN SCC010045222) belongs to the big family of bluesolar Mppt Loader And a wide range of services for the demanding user. Ultra -fast power tracking and automatic adjustment of the Mpp There are only 2 of the many highlights of this device class. The devices of classes 150/45 to 150/100TR are also available as a version with MC4 connections on the solar side of the charge controller instead of screw clamps. In addition, this model dominates the parallel operation with other controllers of the same type.VE-DIRECT options for programming, data in real time and display of the courseModern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Advanced Maximum Power Point Detection of partial shadingIn the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the Bluesolar device will always maximize the energy yield by Mpp set.Essential product features of the Bluesolar 150/45 45a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Paralel operation with other 150/45 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries TR version = connection of the solar modules via screw terminals (max. 35mm²) Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 45a, 150V maximum PV empty voltage Maximum PV performance: 12V: 650W - 24V 1300W - 48V 2600W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and lighting option High-speed Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Extensive electronic protection- Protection against the polished battery connection- PV backstream lock- Protection against overheating of the device- Protection before short circuits- Protection against the PV connection, PV connectionVe.direct data communication sportVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world.Scope of delivery1x Victron SCC010045222 Bluesolar Mppt 150/45 12V 24V 36V 48V 45A LoaderOperating instructions
€382,00
The SmartSolar Mppt 150/70-TR VICTRON Energy (MPN SCC115070411) belongs to the latest generation Smarter Loader of the Dutch premium manufacturer. The controller processes a whopping 70a solar power and can flexibly work with 12/24/36/48V batteries. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. Ve.can is particularly suitable for systems with several solar charging devices, with it up to 25 controllers can be synchronized. Compared to the Bluesolar series, the Bluetooth module is already integrated in the controller at the SmartSolar family, which makes the smart dongle superfluous in this device. Also new is the optionally available LCD display, which can simply be plugged into the SmartSolar 150/70-TR VE.CAN if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-L TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. About the SmartSolar Mppt 150/70-TR Ve.can ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield Parallel operation with other ve.can regulators Regulatory constant charging voltage and conservation charging voltage Suitable for all AGM, gel, lead acid and lithium batteries Fully programmable charging algorithms Multi-level and adaptive loading algorithm Remote-controlled switching on and off Integrated temperature sensor Programmable relay Optional LCD display available Smart data communication via VE.Direct and lightning-fast Bluetooth module Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to stop, however, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar device will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Technical data Nominal power: 70a Maximum PV empty voltage: 150V high maximum efficiency of 98% Max. Short circuit current: 50A Maximum PV performance: 12V 1000W / 24V 2000W / 48V 4000W Protection class IP 43 (electrical components) and protection class IP 22 (connection area) Weight: 3kg Dimensions: 185 x 250 x 95 mm Scope of delivery1x Victron SCC115070411 SmartSolar Mppt 150/70-TR 70A Loader
€376,00
The Victron Mppt 75/15 (MPN SCC010015050R) belongs to the large family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 75/15 has some other innovative technologies.Options for programming, data in real time and display of the course Modern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Essential product features of the Bluesolar 75/15 15a 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel 12V 24V systems possible Nennladestrom 15a 220W maximum PV power at 12V, 440W at 24V systems Load exit with 15a power and automatic load shutdown with impending subtle tension (deep discharge protection Integrated protection against battery reolving Multi-level and adaptive loading algorithm Programmable battery charging algorithm Integrated Battery Life Algorithm extends the life of your batteries if he is active and all loads run over the load exit on the controller Day/night-time control and light insulation option Ve.direct data communication sport integratedVe.direct In text mode, all important parameters to other devices with the with the Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete canbus integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world in the information area.Battery Life Algorithm contributes to increasing the battery lifeIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular full charging) is optimal for small lead battery and especially in the case of bleed acid batteries, such irregular loading and unloading leads to damage to the battery after a few months and the lifespan partially shortensThe Battery Life Algorithm monitors the charging status of the battery and, if necessary, it takes up the threshold every day to separate the load (i.e., the load is separated earlier) until the energy obtained is sufficient to charge the battery up to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery1x Victron SCC010015050R Bluesolar Mppt 75/15 12V 24V 15a Loader1x operating instructions
€49,00
The Blue Smart IP22 24/16 (1) charger of Victron Energy (MPN BPC241642002) is a professional, compact 24V 16A battery charger of the latest generation with a charging output and built -in Bluetooth! The Blue Smart IP22 24/16 (1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 24V lead batteries and modern lithium batteries. It offers Highlights of the 24/16 (1) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-downloaded "dead" batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 24/16 (1) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 24/16 (1) Blue Smart IP22 Charger Victron part number: BPC241642002 Lades 24V lead-acid, gel, agm and lithium batteries 16a maximum charging current 1 battery charging output Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other features of the 24/16 (1) Blue Smart IP22 Batterieladers Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 24/16 (1) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 24V battery) in order to minimize gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC241642002 24/16 (1) IP22 Blue Smart Charger 1x operating instructions
€202,00
The Multiplus-II 48/5000/70-50 GX is a high-end device combination of Victron Energy (MPN PMP482506000) connects the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 50 A and the potential area of application extends to eating applications. The inverter module provides a whopping 5000 W or 4000 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, with which it can be switched back and forth between the AC connections. Compared to the remaining devices of the series, the GX variants have an integrated GX display with numerous other connection options. Important performance features of the Multiplus-II 48/5000/70-50 GX Integrated GX control device with various communication connections PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* Technical features 5000W power with non -linear load 4000 W continuous load and 9000 W Top performance For 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 48/5000/70-50 GX. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failure The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Scope of the integrated GX device A Ve.CAN interface This can be used to use Victron Ve.CAN devices (e.g. Ve.CAN Mppt). The connection can also be configured via the remote console for use with a compatible CAN bus Li-ion battery. 1xusb connection 1x Ethernet connection 1x Ve.direct connection Many options for system expansion The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel. Configuration and monitoring remotely Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed. Scope of delivery: 1x VICTRON PMP482506000 Multiplus-II 48/5000/70-50 GX 230V1x operating instructions
€980,00
The Orion-TR 24/24-17 from Victron Energy (MPN Ori242441110) is a galvanized DC-DC voltage converter and ensures regulated DC voltage and thus for the interference-free operation of your DC consumers. The compact Orion-Tr DC-DC voltage converter converts the DC input voltage (20-35V) into a controllable 24V output voltage (20-30V) and delivers a constant permanent current of 17A, which corresponds to an output of 400W. Thanks to the Orion-Tr 24/24-17, you can supply every 24V consumer with exactly the right voltage. The correct voltage is also guaranteed for longer lines, since the Orion can adapt the tension to occurring management losses. With many sensitive electronics devices, compliance with the exact operating tension is essential for a smooth function. The Orion-TR 24/24-17 also dominates the parallel circuit with identical devices and has a remote-controllable input. Important features of the Orion-Tr 24/24-17 400W (with a galvanic separation) Victron Energy Part number: Ori242441110 for 24V battery voltage, controllable output voltage 20-30V Max. 400W output power with a maximum stream of 17a Wide input clamping area: 20-35V Protection class IP43, galvanic separation 200V DC between the entrance, output and housing can be switched in parallel with similar devices for increasing performance Remote control on and off switch high efficiency of 87% Not suitable for charging batteries. Please consider the use of an Orion-Tr Smart to charge the batteries. Remote-controllable ON/OFF switches Due to the remote control in/out connection, no high current switch in the input cabling is no longer necessary. The remote control in/out connection can be controlled with a power saving switch or by the run/stop switch of the engine (see manual). Scope of delivery: 1x Victron Energy Ori242441110 Orion-Tr 24/24-17 17A 400W DC-DC voltage converter
€182,00
The SmartSolar Mppt 150/100-TR from Victron Energy (MPN SCC010100210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. The devices of classes 150/45TR to 150/100-TR are also available as a version with MC4 connections on the solar side of the loading control instead of screw clamps. This model also dominates parallel operation with other controls of the same type. Compared to the Bluesolar series, the Bluetooth module is already integrated in the controller at the SmartSolar family, which makes the smart dongle superfluous in this device. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 150/100-TR 100a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/100 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing max. Maximum PV performance: 12V 1450W / 24V 2900W / 48V 5800W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Smart data communication via VE.Direct and lightning-fast Bluetooth module In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 150/100-TR prefers to use and configure, you can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC010100210 SmartSolar Mppt 150/100-TR 12V 24V 36V 48V 70A LoaderOperating instructions
€469,00
The intelligent Smartshunt 500a from Victron Energy is a multifunctional battery engine with which you can display all information about your cell phone or via the VictronConnect app. So you have effortless access to all monitored battery parameters. Among other things, this includes the state of charge, the remaining term, course data and many other data. There is also the possibility to connect the Smartshunt on a GX device, such as a Cerbo-GX or the Color Control GX, and to read out of information from it. The connection is therefore via a VE.Direct cable. The waterproof battery lesser also represents an excellent option for BMV battery monitoring. Especially in systems where battery monitoring is required, but less wiring and disorder is required. About the Smartshunt Multifunctional battery engine Connection via Bluetooth to the VictronConnect app Connection to a GX device Battery monitoring Waterproof according to IP65 Bolts for shunt connections: M10 The following variations are also available: 1000 A 2000 a Why a battery monitoring? Batteries are used in a variety of applications, mostly to store energy for future use. However, the amount of energy actually stored cannot be read directly on the battery. Factors such as sub- or overload, deep discharge, too high charging or discharge flows as well as high ambient temperature can shorten the lifespan of the battery. An advanced battery lesser enables the monitoring of this and provides important feedback to you as a user. This means that suitable measures can be taken if necessary in order to extend the term profitably. The investment in the battery teacher quickly pays off. The VictronConnect app The app is essential for setting up and monitoring! The following options for connection are: Bluetooth USB, via the optional interface Remote-controlled via a GX device and the VRM portal The app is available for the following platforms: Android Apple iOS (USB is not supported, only a connection via Bluetooth is possible) Macos Windows (Bluetooth is not supported, only a connection via USB is possible) You can download the app from the respective app stores or from the Victron product page. Alternatively, a QR code is available. You can also find instructions on VictronConnect in the appendix. Technical data Tension range power supply: 6.5-70V DC Electricity: Input voltage area, additional battery: 6.5-70V DC Battery capacity: 1-9999 Ah Operating temperature range: -40 ° C - +50 ° C Temperature measuring range: -20 ° C - +50 ° C Dimensions: 46 x 120 x 54 mm Protection class IP65 Scope of delivery: 1x Victron Smartshunt 500A/50MV battery maker IP65
€101,00
The Victron Mppt 100/30 (MPN SCC020030200) belongs to the big family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. In addition to the larger loading and PV performance, this Blue differentiates even more from the lower models. Because the 100/30 controller has the ability to fully program and save different charging algorithms. The self-created algos can then be selected directly via a Switch wheels on the housing. The load exit directly on the controller is no longer available from this model More protection compared to the smaller models of the Blursolar Mppt series Compared to the 75/10, 75/15 and 100/15 model, the Bluesolar 100/30 has Mppt Via overheating protection with a switch-off function and automatic recovery after reaching a normal operating temperature. High-speed Mpp-Tracker of the latest generationEspecially when the sky is covered, when the lighting intensity is constantly changing, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 100/30 has some other innovative technologies such as VE.Direct Communication.Options for programming, data in real time and display of the courseModern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Essential product features of the Bluesolar 100/30 30A 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable loading algorithms that can later be activated and used manually via a switch on the housing Nominal charging current 30A, 100V maximum PV empty voltage 440W maximum PV power at 12V, 880W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Day/night-time control and light insulation option Ve.direct data communication sportVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world.Scope of delivery1x Victron SCC020030200 Bluesolar Mppt 100/30 12V 24V 30A LoaderOperating instructions
€101,00
The Lifepo4 25.6V 200Ah Smart Battery (MPN BAT524120610) from Victron Energy is a Lifepo4 battery of the latest generation. At full load, the LIFEPO4 saves 25.6/200 smart a whopping 5120Wh of electricity, with a very low self -discharge and outstanding lifespan. The Victron family's LIFEPO4 battery already has an integrated cell compensation and a BMS (battery management system) interface. The integrated Bluetooth to connect to the Li-Ion app round off the overall package. Victron Lifepo4 25.6V 200Ah Smart Battery Nominal voltage: 25.6V Integrated Bluetooth for connecting to the Victron Li-ion app Victron part number: BAT524120610 Name energy at 25 ° C*: 5120Wh Nominal capacity at 25 ° C / 0 ° C / -25 ° C: 200AH / 160AH / 100AH Cyclical number 80% / 70% / 50%: 2500/3000/5000 cycles Recommended continuous discharge current: maximum continuous discharge flow: 400a Dimensions: 237 x 650 x 163 mm Weight: 39kg Connection terminal: M8 You can find more technical data in the official data sheet and below in the area of "technical data". Efficient, economical Lifepo4 25.6V 200Ah Smart Battery Lifepo4 batteries are expensive compared to AGM batteries or gel batteries, but in most cases the higher acquisition costs will be more than calculated. With a lifespan of up to 5000 cycles, you also exceed the maximum lifespan of the best lead-acid batteries. In addition, the LFP 25.6/200 scores in terms of space saving and weight saving with 70%. At 92%, the degree of energy is also significantly above the 80% of lead-acid batteries, which can be of essential importance, especially for offgrid systems, especially in the case of network-independent solar and/or wind turbines. MultiTalent: infinitely flexible with lithium technology from Victron Energy Lifepo4 Smart batteries from Victron can be implemented in almost all common applications. This technology has been playing an important role in the mobile area for a long time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and an irregular charging cannot harm you, they also make their way into land applications and can now be found in almost all system classes. Parallel and series circuit up to max. 3000AH at 48V Thanks to the integrated cell compensation and cell monitoring function, you can conveniently switch up to 10 batteries of this type in parallel and up to 4 10 blocks in series, which results in a maximum of 3000AH at 48V- this corresponds to a maximum storable name of around 154,000 WH (in use with the 300AH 12.8V version). Integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful to recognize a (possible) problem like a cell light weight in good time. Light note: The use of an additional BMS is imperative to interrupt or switch off if the voltage of a battery cell drops below 2.5V or to stop the charging process if the voltage of a battery cell increases to over 4.2V and switching off the system when the temperature of the cell exceeds 50 ° C. The Ve.Bus BMS is suitable for this - You can find more details from the devices. Please ask the respective article descriptions. Due to the classification as a dangerous goods, this product is sent by forwarding agent! Scope of delivery: 1x Victron Energy BAT524120610 LIFEPO4 25.6V 200Ah Smart Battery1x operating instructions
€1.923,00
They have 48 from 71 Seen products
