Victron Energy is a renowned provider of energy solutions known for its high -quality inverter and solar loader. Victron's products are characterized by their reliability, simple integration into existing systems and their ability to manage high performance peaks.
The SmartSolar 150/35 Mppt By Victron Energy (SCC115035210) belongs to the latest generation Smarter Solar loader, with integrated Bluetooth for data transmission and configuration via app on the smartphone or tablet. It supports batteries with a voltage of 12V 24V 36V or 48V and is therefore very versatile. The maximum charging current is 35a and uses the latest loading processes. Depending on the system voltage, the controller can use 500W (12V) up to 2000W (48V) efficiently to charge your batteries. In addition, this device also enables the compensation of partial shading and one of the most reliable Mppt Tracker on the market. Optionally, the MPPT Wirbox-M from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 150/35 35a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 35a, 100V maximum PV empty voltage 12V: 500W / 24V: 1000W / 36V: 1500W / 48V: 2000W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option VE-DIRECT Data port for programming, data evaluation in real time and display of the course Modern Apple and Android smartphones, and tablets, for example, can be used via VI VE.Direct with the system monitors GX Color Control, the Venus GX, or the Mppt Control panel. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 150/35 has some other innovative technologies such as Ve.direct Communication. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection Number of charging outputs: 1 Self -consumption in standby: 10 mA Guarantee: 5 years of manufacturer's guarantee 1 Weight: 1.46 kg Manufacturer: Victron Energy Type of charge: Mppt Product type 1: Mppt solar loader Protection class (IP): IP43 (electronic components) IP22 (connection area) Protection functions: Battery reversal, PV rotation, short circuit, overheating Solar module current (max.): 35a Temperature compensation: 12V -16 MV / ¡C, 24V -32MV / ¡C, 68V -32MV / ¡C Ambient temperature: -30 within Scope of delivery1x Victron Energy SCC115035210 SmartSolar Mppt 150/35 12V 24V 36V 48V 35A LoaderOperating instructions
€141,00
The SmartSolar 150/35 Mppt from Victron Energy (SCC115035210) belongs to the latest generation Smarter Solar loader, with integrated Bluetooth for data transmission and configuration via app on the smartphone or tablet. It supports batteries with a voltage of 12V 24V 36V or 48V and is therefore very versatile. The maximum charging current is 35a and uses the latest loading processes. Depending on the system voltage, the controller can use 500W (12V) up to 2000W (48V) efficiently to charge your batteries. In addition, this device also enables the compensation of partial shading and one of the most reliable Mppt Tracker on the market. The option is that Mpptwirbox-m From Victron Energy the ideal addition to your smartsolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 150/35 35a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 35a, 100V maximum PV empty voltage 12V: 500W / 24V: 1000W / 36V: 1500W / 48V: 2000W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option VE-DIRECT Data port for programming, data evaluation in real time and display of the course Modern Apple and Android smartphones, and tablets, for example, can be used via VI VE.Direct with the system monitors GX Color Control, the Venus GX, or the Mppt Control panel. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 150/35 has some other innovative technologies such as Ve.direct Communication. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection Number of charging outputs: 1 Self -consumption in standby: 10 mA Guarantee: 5 years of manufacturer's guarantee 1 Weight: 1.46 kg Manufacturer: Victron Energy Type of charge: Mppt Product type 1: Mppt solar loader Protection class (IP): IP43 (electronic components) IP22 (connection area) Protection functions: Battery reversal, PV rotation, short circuit, overheating Solar module current (max.): 35a Temperature compensation: 12V -16 MV / ¡C, 24V -32MV / ¡C, 68V -32MV / ¡C Ambient temperature: -30 within Scope of delivery1x Victron Energy SCC115035210 SmartSolar Mppt 150/35 12V 24V 36V 48V 35A LoaderOperating instructions
€167,00
The SmartSolar Mppt 250/100-TR from Victron Energy (MPN SCC125110210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. This model also dominates parallel operation with other controls of the same type. Compared to the SmartSolar 150/XXX series, the 250/XXX series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/100-TR 100a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Max. PV performance: 12V 1450W / 24V 2900W / 48V 5800W max. Max. PV input current: 250 volt integrated VE.Direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/100-TR prefer to use and configure, which can retrofit the SmartSolar Control SCC900600010 display. The installation effort is limited to plug in the display to the SmartSolar. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The devices of classes 250/60-TR up to 250/100-TR are also available as a version with MC4 connections on the solar page of the loader instead of the screw clamps. Scope of delivery1x Victron SCC125110210 SmartSolar Mppt 250/100-TR 12V 24V 36V 48V 85A Loader1x operating instructions
€950,00 €555,90
The SmartSolar Mppt 250/100-MC4 from Victron Energy (MPN SCC125110310), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. This model also dominates parallel operation with other controls of the same type. Compared to the SmartSolar 150/XXX series, the 250/XXX series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-MC4 if necessary. The display then provides all important information about the controller. If necessary, the Mppt Wirbox-XL MC4 from Victron Energy The ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/100-MC4 100A 12V 24V 36V 48V Mppt ultra -quick Mppt-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Max. PV performance: 12V 1450W / 24V 2900W / 48V 5800W max. Max. PV input current: 250 volt integrated VE.Direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Mc4acker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/100-MC4 would prefer to use and configure the SmartSolar Control SCC900600010 display. The installation effort is limited to plug in the display to the SmartSolar. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The devices of classes 250/60-MC4 to 250/100-MC4 are also available as a version with MC4 connections on the solar side of the loader control instead of the screw terminals. Scope of delivery1x Victron SCC125110310 SmartSolar Mppt 250/100-MC4 12V 24V 36V 48V 85A Loader1x operating instructions
€975,00 €564,00
The Mppt RS SmartSolar from Victron Energy (MPN: SCC145120410) is a 48V-Solar loader With a PV input voltage of up to 450 VDC and an output of 200A. It is used in network -bound and network -independent solar applications in which maximum battery noise is required. Characteristics With ultra -fast Maximum Power Point Tracking (Mppt) Several independent Mppt-Tracking inputs Isolated PV connections for additional security Tall Mppt-Place Light, efficient and quiet Integrated display and Bluetooth communication PV isolation resistance monitoring for security at higher voltages Ve.can and ve.direct connection E/A compounds Configure and monitor with VictronConnect app or in the VRM portal The integrated BluetoothsMart connection enables quick monitoring or configuration of the settings via app. The integrated 30-day course shows the individual performance of the individual Mppt-Tracker. The app enables the display of e.g. battery voltage and current, PV voltage and current, course data and trends. The VictronConnect app is available for Android, iOS, Windows and MacOS X.If the solar controller is connected to a GX device and the Internet, the Victron Remote Management Portal (VRM) offers access to the full performance of your SmartSolar RSLoader. Additional units switched into series The SmartSolar RSLoader is equipped with Ve.can bus connections. This enables communication with additional SmartSolar RS & VE.CAN Mppt-units. The additional units are simply "chained" with a RJ45 cable. If you are connected, synchronize all individuals Loader Your charging levels. You can also send your data to a GX device (such as the Cerbogx) via the same cable for monitoring. Technical data Battery voltage: 48V Nennladestrom: 200a Max. Charge power: 11.5 kW at 57.6V Ladeal gorithm: multi -stage adaptive (adaptable) Max. DC-PV voltage: 450V Mppt-Operating voltage area: 80-450V Number of trackers: 4 Max. PV operating current: 18A pro tracker Protection class: IP21 Dimensions: 487 x 434 x 146 mm Weight: 13.7 kg Scope of delivery: 1x Victron Smartsolar Mppt RS 450/200-RT 48V Loader
€1.758,00
The Multiplus-II 12/3000/120-32 is a high-end device combination of Victron Energy (MPN PMP122305010) connects the classic multiplus components with an external current sensor and integrated anti-Icelanding function. This expands the functions PowerControl and Power Assist to 50 A. The inverter module provides a whopping 3000 W or 2400 W with a linear permanent burden on non -linear loads. The 12 V battery charger is also very well proportioned with 120 A charging power and is supplemented by a 32 A transfer switch, with which it can be switched back and forth between the AC connections. Important performance features of the Multiplus-II 12/3000/120-32 PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures can be used in different applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* Technical features 3000 W power with non -linear load 2400 W continuous load and 5500 W Top performance for 12 V battery voltage, 32 A transfer switch and 120 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 12/3000/120-32. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failure The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Many options for system expansion The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel. Configuration and monitoring remotely Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed. Scope of delivery: 1x Victron PMP122305010 Multiplus-II 12/3000/120-32A1x operating instructions
€1.166,00
The Victron Mppt 75/10 (MPN SCC010010050R) belongs to the large family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 75/10 has some other innovative technologies.Options for programming, data in real time and display of the course Modern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Essential product features of the Bluesolar 75/10 10a 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel 12V 24V systems possible Nennladestrom 10a 145W maximum PV power at 12V, 290W at 24V systems Load exit with 10A power and automatic load shutdown when the battery is threatened (deep discharge protection Integrated protection against battery reolving Multi-level and adaptive loading algorithm Programmable battery charging algorithm Integrated Battery Life Algorithm extends the life of your batteries if he is active and all loads run over the load exit on the controller Day/night-time control and light insulation option Ve.direct data communication sport integratedVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world in the information area.Battery Life Algorithm contributes to increasing the battery lifeIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular full charging) is ideal for small lead battery, especially in the case of bleed acid batteries, such irregular loading and unloading leads to damage to the battery after just a few months and the lifespan is partially quite clearThe Battery Life Algorithm monitors the charging status of the battery and, if necessary, it takes up the threshold every day to separate the load (i.e., the load is separated earlier) until the energy obtained is sufficient to charge the battery up to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery1x Victron SCC010010050R Bluesolar Mppt 75/10 12V 24V 10A Loader
€46,89
The GX Touch 70 Display from Victron Energy (MPN BPP900455070) is the display accessories for the Cerbo GX communication center. The 7-inch touchscreen display offers an immediate overview of your system and allows you to have settings in no time at all. The display is easily connected to Cerbo GX via a cable. Its super -slim, waterproof design and easy installation offer a lot of flexibility. Properties of the GX Touch 70 7-inch touchscreen display Immediate system overview Easy attachment from above Connection via a cable The addition to the Cerbo GX The GX Touch 70 Display is the ideal addition to yours Cerbo GX To optimally use the communication center. Use the Bluetooth capability directly via GX Touch 70 and optimize your system and make changes easily and quickly. Scope of delivery: 1x GX Touch 70 Display1x HDMI USB connection cable1x assembly material
€294,00
The SmartSolar Mppt 150/45 by Victron Energy (MPN SCC115045212), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer and processes a whopping 45a solar power and can flexibly work with 12/24/36/48 V batteries. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. The SmartSolar 150/45 is also available as a version with MC4 connections on the solar side of the charge controller instead of screw clamps. This model also dominates parallel operation with other controls of the same type. Compared to the Bluesolar series, the Bluetooth module is already integrated in the controller at the SmartSolar family, which makes the smart dongle superfluous in this device. Optionally, the MPPT Wirbox-L TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 150/45 45a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Nominal charging current 45a, 150V maximum PV empty voltage Maximum PV performance: 12 V 650 W / 24 V 1300 W / 48 V 2600 W Victron Energy Part number (MPN): SCC115045212 Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Integrated VE.direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/45 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart data communication via VE.Direct and lightning -fast Bluetooth Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be configured by many important functions of the Mppt 150/45 SmartSolar reglers. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar 150/45 will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second, which is used with the Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC115045212 SmartSolar Mppt 150/45 12V 24V 36V 48V 45A LoaderOperating instructions
€198,00
The multiplus-II 48/3000/35-32 is a high-end device combination of Victron Energy (MPN PMP482305010) connects the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 50 A and the potential area of application extends to eating applications. The inverter module provides a whopping 3000 W or 2400 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 35 A charging power and is supplemented by a 32 A transfer switch, with which it can be switched back and forth between the AC connections. Important performance features of the Multiplus-II 48/3000/35-32 PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* Technical features 3000W power with non -linear load 2400 W continuous load and 6000 W Top output For 48 V battery voltage, 32 A transfer switch and 35 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 48/3000/35-32. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failure The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Many options for system expansion The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel. Configuration and monitoring remotely Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed. Scope of delivery: 1x Victron PMP482305010 Multiplus-II 48/3000/35-32A 1x operating instructions
€624,00
The Energy Meter EM24 from Victron Energy (MPN Rel200200100) is a three-phase energy counter with a maximum of 65A pro Phase. He uses Dim Dimer connection/counter box to measure the services on all three phases. The energy meter can be used as: Network meter and is used as a tax input for an ESS system Measurement device for the performance of a PV inverter Measurement device for the performance of an alternating current unit For all uses mentioned above, the measuring device should be connected to the local network so that the GX device can achieve it. Note on GX firmware versions To support the Ethernet EM24 measuring devices, Venus 2.60 is the minimum firmware required on the GX device. Scope of delivery: 1x Victron Energy Meter EM24 Rel200200100
€164,00
The Cerbo-S GX Communication Center from Victron Energy (MPN BPP900450120) enables perfect control over your system and maximizes its performance. Maximizing the system performance has never been so easy. The cheaper variant of the Cerbo-GX series has all the important features for perfect communication except for the BMS-CAN connection, temperature sensor inputs and resistive tank level inputs. Easy monitoring and control With the Cerbo-S GX, you can monitor electricity consumption, the energy generation from PV, generator and network from anywhere. Simply control the current limitation for country electricity feed, the (automatic) start/stop generator or change any settings to optimize the system. Follow warning messages, carry out diagnostic tests and solve problems from afar. Properties of the Cerbo-S GX communication center Easy control of your system Flexible connection options Maximizing your system performance Uncomplicated assembly Technical data Operating voltage: 8-70 V/DC Assembly: wall or DIN rail 35mm Dimensions: 78 x 154 x 48 mm Operating temperature range: -20 to +50 ° C Cable length: 2 meters Security: IEC 62368-1 EMC EN: EN 301489-1, EN 301489-17 Available connections 3 Ve.direct ports 3 USB ports 4 digital inputs 2 relays 2 Ve.Bus 2 ve.can Flexible connection options The system control by the Cerbo GX communication center is possible regardless of location and time. The device offers three different options for connection. Either via the free Victron Remote Management (VRM) Portal, the Victron Energy GX Touch 50 (5-inch touchscreen display) or via the VictronConnect app via Bluetooth. Scope of delivery: 1x Cerbo-S GX1x power cable with inline protection and M8 connection eyes for battery or DC collection rail fastening.2x Ve.CAN closing resistances1x terminal blocks for all connections on each side.
€197,00
The ORION TR-SMART DC-DC from Victron Energy (MPN Ori242440140) is a professional, DC to DC adaptive 3-stage charger with integrated Bluetooth, known in the market as a battery-to-battery (B2B) loader. The charging booster is suitable for use in double battery systems in vehicles or on boats, in which the alternator and the start battery are used for charging the service battery. The charger can be used in 12V or 24V systems and is suitable for both lead and lithium batteries. Models up to 400W are available and many devices can be switched in parallel to increase the output power. Essential properties Suitable for Bluetooth Smart Fully programmable Adaptive 3-stage loading algorithm Fern-/shutdown Short -circuit -resistant Parallel circuit possible to increase the output current possible Over -temperature protection Protection class IP43 Suitable for Bluetooth Smart Monitoring, changing the settings and updating the charger for newly available software functions can be carried out with any Bluetooth-enabled smartphone, tablet or other devices. Adaptive 3 -stage loading algorithm: constant current - constant voltage - preservation With lead batteries, it is important that the recording time is kept short in flat discharges to avoid an overload of the battery. After a deep discharge, the constant voltage duration is automatically extended to ensure that the battery charges completely. The recording time is fixed for lithium batteries, 2 hours by default. Alternatively, a fixed output voltage can be selected. Fern-/shutdown A remote-controlled on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, the connection H (right) of the two-pin connector can be switched to a battery plus pole or the connection l (left) of the two-pin connector to the battery minus pole (or for example to the body of a vehicle). Technical data Input voltage area: 20-35 V Starting tension: 24.2 V Setting range output voltage: 20-30 V Tolerance Output voltage: ± 0.2 V Account. Account. Output power at 40 ° C: 400 W Operating temperature range: -20 ° C - +55 ° C Weight: 1.6 kg Dimensions: 130 x 186 x 70 mm Scope of delivery: 1x Victron Energy Orion-TR Smart DC/DC chargingbooster 24/24-17a (400W) Ori242440140
€232,00
The GX Touch 50 display from Victron Energy (MPN BPP900455050) is the display accessories for the Cerbo GX communication center. The 5-inch touchscreen display offers an immediate overview of your system and allows you to be presented in no time at all. The display is easily connected to Cerbo GX via a cable. Its super -slim, waterproof design and easy installation offer a lot of flexibility. Properties of the GX Touch 50 5-inch touchscreen display Immediate system overview Easy attachment from above Connection via a cable The addition to the Cerbo GX The GX Touch 50 display is the ideal addition to yours Cerbo GX To optimally use the communication center. Use the Bluetooth capability directly via GX Touch 50 and optimize your system and make changes easily and quickly. Scope of delivery: 1x GX Touch 50 display1x HDMI USB connection cable1x assembly material
€199,00
The Orion-XS 12/12-50 700W Battery charger from Victron Energy (MPN Ori121217040) offers extensive remote monitoring and remote control options, which gives you complete control over your device and system. The Orion-Xs revolutionizes the adaptive DC DC shop from batteries. It was specially developed for use in dual battery systems that are loaded by an (intelligent) alternator. The innovative technology for cooling the aluminum board ensures an astonishing efficiency of 98 %without fans. The Orion-Xs acts both as a DC-DC battery charger and as a power source and offers a large input and output voltage area. This is particularly important for vehicles with an intelligent alternator in the Euro 5 or Euro 6 classes, which often delivers too low charging voltage, even if the engine runs or in situations with longer cables, as often occurred on boats and motorhomes, voltage waste can occur. In such scenarios, precise and controlled charging is essential to completely load the service battery and protect the starter/input battery from unloading. Important features of the Orion-X 12/12-50 700W fully configurable Detection of the engine shutdown Switching off at low temperature Efficient cooling Works with VictronConnect Optional remote monitoring IP65 protection class (dust and waterproof) adaptive four -stage loading algorithm With lead batteries, it is crucial to keep the constant voltage phase short in flat discharges in order to prevent the battery from overloading. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery charges completely. The Orion XS offers fully programmable loading algorithms and eight pre -programmed battery settings. Remote-controlled ON/OFF switch The Orion XS can be switched on and off via the connector to the remote-controlled on/off or switched on and off using the VictronConnect app. Typical applications are the cabling of a switch or a battery management system (BMS). Intelligent alternator compatibility An integrated mechanism determines whether the engine is running (engine shutdown detection), which means that the charger is only activated if the alternator delivers electricity. This ensures that the charger only receives electricity when the alternator delivers electricity, i.e. when the engine runs. Comprehensive electronic protection The protective functions include overload, short circuit and overtemperature. The charger is protected against overheating by reducing the output power when the maximum device temperature is reached. Parallel connection to increase the output current It is possible to switch any number of devices in parallel. Technical data Max. constant short -circuit current: 50A Continuous starting performance up to 40 ° C: 700W Input voltage area: 9-17V Regulated output voltage area: 10-17V Tolerance Output voltage: +/- 0.25% Max. Effect: 98.5% Electricity consumption without load: Electricity consumption in standby operation: Temperature range: -20 ° C to +60 ° C Moisture: Max. 95% not condensing Weight: 0.330kg Dimensions: 137.3mm x 123.1 x 40mm Scope of delivery 1x Victron Energy Orion-Xs 12/12 50 700W DC-DC Battery charger
€354,00
The Victron Energy SmartSolar Mppt 100/50 50a 12V/24V solar Loader (MPN SCC110050210), is the new version of the Bluesolar 100/50. The smart version differs only in the Blue version, primarily by the permanently integrated Bluetooth communication module. This allows the SmartSolar-Loader Completely monitor and analyze on each app-enabled device. The VICTRON Connect app required for this can be installed free of charge. Optionally, the MPPT Wirbox-M from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 100/50 50a 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport high maximum efficiency of 98% For 12V and 24V systems Integrated Bluetooth module 50a maximum charging current Fully programmable loading algorithms that can later be activated and used manually via a switch on the housing 100V maximum PV empty voltage 700W maximum PV power at 12V, 1400W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Day/night-time control and light insulation option More protection compared to the smaller models of the SmartSolar Mppt seriesCompared to the 75/10, 75/15 and 100/15 model, the SmartSolar 100/30 has Mppt Via overheating protection with a switch-off function and automatic recovery after reaching a normal operating temperature.Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 100/50 has some other innovative technologies such as VE.Direct Communication. Options for programming, data in real time and display of the courseModern Apple and Android smartphones, tablets, macbooks and other devices can be used, for example, via the integrated Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Flexible loading algorithmsFully programmable loading algorithm (also note the software page on our website) and eight pre-programmed algorithms that can be selected using a rotary knob (further details can be found in our manual).Scope of delivery: 1x Victron Energy SCC110050210 SmartSolar Mppt 100/50 50a 12V/24V solar Loader1x operating instructions
€167,00
The electricity meter Victron EM540 (MPN Rel200100100) is designed to monitor three-phase operating modes, for example PV inverter, ACoric unit or inverter. In this way you can measure the performance and energy of the entire system as a direct measurement in the distribution box. The Victron EM540 uses a higher sampling speed compared to the EM24. It is suitable as a supplement to an inverter/charger from Victron. The device offers two options for connecting to a GX device: Cable connection via RS485-to-USB interface with a cable length of 1.8m or 5m Wireless connection via Zigbee-to-USB and Zigbee-to-RS485 converter The article at a glance Usable as a network meter and as a tax input for an eating system Can be used to measure the performance of a PV inverter or an ACoric unit Support of different types of energy counters Use for displaying the data on a GX device Technical data: Manufacturer number number: Rel200100100 Display: LCD Phases: suitable for 3 phases Max. Nominal current: 65a pro phase Mass type: Direct/Shunt Communication: RS485 Scope of delivery: 1x Victron Energy EM540 Energy Meter 3-Phasig (Rel200100100)
€133,00
The Blue Smart IP22 12/30 (1) charger of Victron Energy (MPN BPC123047002), is a professional, compact 12V 30A battery charger of the latest generation with a charging output and built -in Bluetooth! The Blue Smart IP22 12/30 (1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/30 (1) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-downloaded "dead" batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 12/30 (1) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 12/30 (1) Blue Smart IP22 Charger Victron part number: BPC123042002 Lades 12V lead-acid, gel, agm and lithium batteries 30a maximum charging current 1 battery charging output Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other performance features of the 12/30 (1) Blue Smart IP22 battery loader Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 12/30 (1) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 12V battery) in order to minimize the gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC123047002 12/30 (1) IP22 Blue Smart Charger1x operating instructions
€197,00
The Multiplus-II 48/5000/70-50 is a high-end device combination of Victron Energy (MPN: PMP482505010) combines the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 100 A and the potential area of application extends to eating applications. The inverter module provides a whopping 5000 W or 4000 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, with which it can be switched back and forth between the AC connections. Important performance features of the Multiplus-II 48/5000/70-50 PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* Technical features 5000 W power with non -linear load 4000 W continuous load and 9000 W Top output For 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 48/5000/70-50. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failure The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Many options for system expansion The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel. Configuration and monitoring remotely Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed. Scope of delivery: 1x Victron PMP482505010 Multiplus-II 48/5000/70-50a1x operating instructions
€222,00
The Multiplus-II 48/5000/70-50 is a high-end device combination of Victron Energy (MPN: PMP482505010) combines the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 100 A and the potential area of application extends to eating applications. The inverter module provides a whopping 5000 W or 4000 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, with which it can be switched back and forth between the AC connections. Important performance features of the Multiplus-II 48/5000/70-50 PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* Technical features 5000 W power with non -linear load 4000 W continuous load and 9000 W Top output For 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 48/5000/70-50. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failure The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Many options for system expansion The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel. Configuration and monitoring remotely Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed. Scope of delivery: 1x Victron PMP482505010 Multiplus-II 48/5000/70-50a1x operating instructions
€933,00
The Victron Lynx Power in-module (MPN LYN020102000) is used to connect batteries via an external backup. This can be useful if you have several parallel strings. Due to the extremely high short -circuit current potential of most batteries, it is recommended to use an external safety system with a suitable error vacuum assessment (e.g. an NH HRC). Properties of the Victron Lynx Power in 1000a Negative and positive DC collecting rail Easy installation Part of the modular Lynx distribution system Construction The power in module contains a negative and a positive DC collection rail with M8 screws to connect the battery cables. Cables with a diameter of up to 22mm can be guided through the lower introductions and over the two side connections. Scope of delivery: 1x victron lynx power in
€127,00
The SmartSolar 75/15 from Victron Energy (MPN SCC075015060R) is one Mppt Solar Loader With 15a max. Charging current for charging 12V and 24V batteries. In contrast to the Bluesolar 75/15, the Smart version has integrated Bluetooth, which makes buying a Bluetooth dongels superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection.The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 75-10/15 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch.The most important technical properties at an overview 15a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 220W Nominal PV performance at 24V systems: 440W 15a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 75V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth modu Ultra -fast Maximum Power Point TrackingEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %.Intelligent load exitA deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof.Battery Life: Intelligent battery managementIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-acid battery within a few weeks or months.The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week. Number of charging outputs: 1 Battery type adjustable: Support of all common battery types Self -consumption in standby: 10mA Guarantee: 5 years Weight: 0.5 kg Manufacturer: Victron Energy Type of charge: Mppt Product type 1: MPPT loader 15a for 12V and 24V batteries with integrated Bluetooth and extensive setting options as well as an intelligent load exit. Protection class (IP): IP43 (electronic components) IP22 (connection area) Protection functions: Battery reolving fuse outdoor, output ceiling closure, overtemp. Solar module current (max.): 15a Ambient temperature: -30 ° C - +60 ° C Scope of delivery:1x Victron Energysc075015060R SmartSolar Mppt 75/15 15a 12V 24V solar Loader1x operating instructions
€61,00
The SmartSolar 100/20-48 from Victron Energy (MPN SCC110020160R) is one Mppt Solar Loader With 20A max. Charging current for charging 12V, 24V and 48V batteries. In contrast to the Bluesolar version, the Smart version has integrated Bluetooth, which makes buying a Bluetooth Dongles superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection. The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 100-20 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. The most important technical properties at an overview 20a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 290W Nominal PV performance at 24V systems: 580W Nominal PV performance at 48V systems: 1160W 20a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 100V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth module Ultra -fast Maximum Power Point Tracking Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Intelligent load exit A deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof. Battery Life: Intelligent battery management If the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-saucle battery within a few weeks or months. The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery: 1x Victron Energy SmartSolar Mppt 100/20-48 20a 12V 24V 48V solar Loader1x operating instructions Notice The device shows the print 48V - on the packaging of the device the data sheet of the 48V version is printed on the side. Contrary to this confusing information on the device itself, this is suitable for both 12V and 24V - and now now also for 48V batterys. Until recently, these were still separate devices - one for 12V/24V and one for 48V - these two were now summarized and the printing on the housing and packaging from the 48V version was taken over
€81,00
They have 71 from 71 Seen products
