The EV Charging Station NS 22 KW (MPN: EVC200300200) from Victron Energy is a powerful electric vehicle charging station that you can operate both 3-pahsig and 1-phase. It delivers impressive 22 kW AC output in 3-phase operation, while in 1-phase mode there is still solid 7.3 kW available. Although technically identical to the EV Charging station, the new version is characterized by a modern design, which is available in 3 different colors. The setup, configuration and monitoring takes place conveniently from VictronConnect via Bluetooth and /or the integrated web interface, which can be reached via a WiFi access point or WiFi LAN.
Furthermore, a GX device can be integrated and thereby enable you to control the remote control. It is particularly noteworthy that excess solar energy is used directly to charge your vehicle. Manual and time -controlled modes offer additional flexibility to meet the requirements of the electric vehicle, the energy supply system and your general electromobility.
Via the EV Charging Station NS
- Powerful e-vehicle charging station
- WLAN communication
- 1- or 3-phase operation
- Easy operation and control
- Via Bluetooth and VictronConnect app
- Leuchtring to the status display
- 3 operating modes available
- Optionally available colored fronts:
Operation. Control and advertisement
A single look in the VictronConnect app or via Bluetooth, gives you full control and overview of all operating parameters and statistics. Furthermore, a Cerbo GX communication center can optionally be consulted for remote monitoring. The charging station is equipped with a fully programmable RGB glow ring around the loading connection, which enables it to be attributed to the status of the device at a glance. With the help of the integrated web interface, this light ring can be individually configured in order to display different lighting effects according to the current state (separated, loaded, in operation, etc.).
Operating modes
Manual mode for configuring the output current: In manual mode it is possible to configure the output current flexibly in the range from 6 to 32 A. The charging capacity can be controlled in different ways. Either via the web interface, from a GX device and VRM remote monitoring or using VictronConnect. On this way, it is easy to initiate or end the charging process as soon as a vehicle is connected to the charging station.
Optional GX device for VRM remote monitoring:
Automatic mode to ensure the maximum efficiency of the PV system: The charging station automatically recognizes when excess energy is available and only uses them to charge the vehicle. Instead of energy loss that would arise, if excess energy would be lost, it is stored in the battery of the vehicle instead.
Time -controlled mode for charging the vehicle at a certain point in time: Thanks to a fully programmable timer, the vehicle can be charged at different times. For example, during the night when the network costs are lower.
Technical data
- Input voltage area: 170-265V AC
- Nominal charging current: 32a / phase
- Nominal output: 22 kW
- Power distribution area: 6-32 a
- Self -consumption: 15 mA at 230 V
- Operating temperature range: -25 ° C - +50 ° C
- Storage temperature range: -40 ° C - +80 ° C
- Protection class: IP44
- Weight: 3 kg
- Dimensions: 372 x 292 x 122 mm
- Data communication: Modbus TCP via WLAN, Bluetooth
Scope of delivery:
1x Victron Energy EV Charging Station NS 22 KW
