Victron Victron LiFePO4 12.8/100 Smart Battery 12.8V 100Ah 1280Wh
The LiFePO4 12.8V 100Ah Smart Battery (MPN BAT512110610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, the LiFePO4 12.8/100 Smart stores a whopping 1280Wh of power with very low self-discharge and an outstanding service life. The LiFePO4 battery family from Victron already has an integrated cell balancing and a BMS (Battery Management System) interface. The integrated Bluetooth for connecting to the Li-Ion app rounds off the overall package. Victron LiFePO4 12.8V 100AH Smart Battery Nominal voltage: 12.8V Integrated Bluetooth for connection to the Victron Li-Ion app Victron Part Number: BAT512110610 Nominal energy at 25°C*: 1280Wh Nominal capacity at 25°C/0°C/-25°C: 100Ah / 80Ah / 50Ah Number of cycles at depth of discharge 80%/70%/50%: 2500 / 3000 / 5000 cycles Recommended continuous discharge current: 100A Maximum continuous discharge current: 200A Weight: 16kg Connection terminal: M8 Further technical data can be found in the official data sheet and further down in the “technical data” section. Efficient, economical...: LiFePO4 12.8V 100Ah Smart Battery Although LiFePO4 batteries are expensive compared to AGM batteries or GEL batteries, the higher purchase costs are more than worth it in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries by several times. In addition, the LFP 12.8/100 scores highly in terms of space saving and weight saving, each with 70%. The energy utilization rate of 92% is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance in off-grid systems, especially in off-grid solar and/or wind power plants. All-rounder: infinitely flexible with lithium technology from Victron Energy LiFePO4 Smart batteries from Victron can be implemented in almost all common applications. This technology has long played an important role in the mobile sector. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and irregular charging does not harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000AH at 48V Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, which results in a maximum of 3000Ah at 48V - this corresponds to a maximum storable nominal energy of around 154,000 Wh (when used with the 300Ah 12.8V version). Integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful for detecting a (possible) problem such as a cell imbalance in good time. IMPORTANT NOTE: The use of an additional BMS is mandatory to interrupt or switch off the load when the voltage of a battery cell drops below 2.5V or to stop the charging process when the voltage of a battery cell rises above 4.2V and to switch off the system when the temperature of the cell exceeds 50°C. You can choose between the BMS 12/200 and the VE.Bus BMS – for further details about the devices, please refer to the respective article descriptions. Due to the classification as dangerous goods, this product will be shipped via freight forwarder! Scope of delivery: 1x Victron Energy BAT512110610 LiFePO4 12.8V 100AH Smart Battery 1x User manual Further resources on lithium batteries: Victron LiFePO4 batteries - All product families from the category LiFePO4 batteries from VE Category Lithium Batteries - Complete range with all available batteries from this range
€652,00
Victron Victron Blue Smart IP65 12/15 12V 230V battery charger
The Blue Smart IP65 12/15 12V 230V battery charger (BPC121531064R) is the latest professional charger from Victron Energy with built-in Bluetooth. It is designed to charge 12V batteries of various types and delivers a maximum charging current of 15A. Together with the free VictronConnect app, you can easily and smartly evaluate the activity of your battery charger via your smartphone, tablet or computer and even configure it to a certain extent. Technical highlights of the Blue Smart IP65 12/15 battery charger Easy configuration and setup of the Blue Smart IP65 12/15 via Bluetooth interface suitable for all 12V battery types max. 15A charging current Solid protection against splash water, dust and chemicals thanks to protection class IP65 has several features to extend battery life Automatic temperature adjustment at low or high temperatures automatic power supply function 7-stage intelligent charging algorithm can restore completely discharged batteries “dead batteries” has low energy mode for charging small batteries Victron part number: BPC121531064R Lithium-ion battery mode Ultra-high efficiency “green” battery charger With an efficiency of up to 95%, these chargers generate three to four times less heat than the industry standard. And, after the battery is fully charged, power consumption is reduced to 0.5 watts, which is five to ten times better than the industry standard. Durable, safe and quiet low heat load on electronic components protected against the ingress of dust, water and chemicals. Overheating protection: The output current is reduced linearly when the temperature rises up to 60 °C, so the charger does not fail even at extreme temperatures the chargers are absolutely silent thanks to passive cooling: no fan or other moving parts Reconditioning A lead-acid battery that has not been sufficiently charged or has been left in a discharged state for days or weeks will deteriorate in performance due to sulfation. If the process is stopped in time, the sulfation can be partially reversed by charging the battery with a low current until a higher voltage is reached. Function for recovering completely discharged batteries Most chargers with reverse polarity protection will not detect and therefore will not recharge a battery that has been discharged to zero or near zero volts. However, the Blue Power charger will attempt to recharge a completely discharged battery at a low current and will resume normal charging after sufficient voltage has been built up across the battery terminals. Optional accessories Blue Smart IP 65 12/15 BPC121531064R 12 V cigarette lighter plug with fuse 2 meter extension cable Connection terminals with fuses M6 cable lug connector with fuse Scope of delivery: 1x Victron BPC121531064R Blue Smart IP65 12/15 12V 230V battery charger 1x User manual 1x connection terminals 1x M8 cable lug connector
€163,00
Victron Victron Phoenix Inverter 24/1200 230V VE.Direct 1000W 24V
The Victron Phoenix 24/1200VE.Direct (MPN PIN242120200) is a small sine wave inverter with 1000W continuous power. The device converts 24V direct current from your battery into 230V AC alternating current with a pure sine wave voltage and uncompromising power quality that is also ideal for sensitive electronic products. trend-setting efficiency and modern system communication The efficiency of the Phoenix is excellent and, thanks to the ECO mode, one of the highest in its class. Using the VE.Direct communication port, you can connect the device to a computer or smartphone with optional accessories and program some system parameters such as the switch-off voltage and switch-on voltage when the battery is empty completely freely! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter. The performance range of the Phoenix VE.Direct 24/1200 series is currently unique on the market for the price and goes far beyond the capabilities of other devices in the same performance class. Technical features of the Phoenix 1241200 VE.Direct 1000 watts continuous power at 230V 50Hz sine wave voltage 1200 watts continuous power at non-linear load full control over almost all system parameters suitable for all common 24V batteries 230V AC power with pure sine wave delivers perfect power quality Freely programmable switch-on and switch-off thresholds freely adjustable output voltage in the range of 210 – 245V Technical highlights of the Phoenix VE.Direct series 250VA – 1200VA VE.Direct connection allows the power converter to be connected to a computer (VE.Direct to USB interface cable required) or your smartphone on which you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Low battery alarm trigger and reset thresholds + Low battery shutdown and restart thresholds + Output voltage 210 - 245V + Low battery shutdown and restart thresholds + Frequency 50 Hz or 60 Hz + ECO mode on/off threshold and ECO mode sensor Integrated ECO mode: In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). If the load exceeds a preset threshold, the inverter remains switched on. Proven reliability of the power converter: The complete bridging with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). High inrush power: This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Remote on/off switching possible: A remote on/off switch can be connected with a two-pin plug or between the positive pole of the battery and the left contact of the two-pin plug. Scope of delivery: 1x Victron PIN242120200 Phoenix 24/1200 24V to 230V 1000W 50Hz 60Hz
€303,00
Victron Victron Phoenix Smart IP43 Charger 12/50(1+1)
The Phoenix Smart Charger 12/50(1+1) IP43 from Victron Energy (MPN PSC125051085) is a powerful battery charger of the latest generation. The device is designed for 12V battery voltage and offers not only the powerful 50A main charging output but also a secondary charging output with 3A charging power for a starter battery. The Phoenix Smart Charger 12/50(1+1) IP43 with its integrated Bluetooth module fits into Victron's ever-growing Smart family, which can be perfectly networked and centrally controlled in various ways. In addition to the Bluetooth module, there is also a VE.Direct connection and a freely programmable relay. The Smart Battery Sense can also be optionally connected to control the battery temperature compensation. The proven five-stage charging algorithm and the option to program your own charging algorithm make the Phoenix Smart Charger 12/50(1+1) IP43 a universally applicable high-tech battery charger that can optimally charge almost any battery type. Perfect battery charger for boats and vehicles Phoenix Smart battery chargers that contain (1+1) in the model name have a main charging output with full charging current and a 3A secondary charging output for charging starter batteries. These models are therefore particularly suitable for mobile use. The Phoenix Smart models with (3) in the model name were developed especially with the needs of the marine sector in mind and offer three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/50(1+1) IP43 integrated Bluetooth module integrated VE.Direct connections 1x 50A main charging output and 1 additional secondary charging output for starter batteries automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase optimally charges all common battery types Prevent damage caused by gassing thanks to BatterySafe mode Reduced aging through storage with the storage mode also charges LiFePO4 batteries and can be connected to a BMS via optocoupler fully programmable charging algorithm Remote On/Off can be used as a power source Technical features of the Phoenix Smart 12/30(1+1) Victron Part Number: PSC125051085 Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3A charge) Maximum rated charging current: 50A, battery voltage: 12V high efficiency: 94% Protection class: IP43 (electronic components), IP22 (connection area) Further information can be found in the technical data three integrated technologies for all-round healthy batteries Variable constant voltage phase: always delivers the right amount of charge When the battery discharge is small (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. Preventing damage from excessive gassing: BatterySafe mode To shorten the charging time, the highest possible charging current was selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the speed of the voltage increase after the gassing voltage has been reached (see also the graphics in the brochure). Less maintenance and aging when the battery is idle: storage mode Storage mode is activated whenever no discharge has occurred within 24 hours. In storage mode, the float charge voltage is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This creates a type of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Also perfect for LiFePO4 battery The Phoenix Smart Charger 12/50(1+1) IP43 can be fitted with an on/off control by connecting a relay or an open collector optocoupler output from a Li-Ion BMS to the remote on/off port. Alternatively, voltage and current can also be fully controlled via Bluetooth. VE.Direct interface, Bluetooth and programmable relay The Phoenix Smart Charger 12/50(1+1) IP43 from Victron is ideal for a wired data connection to a Color Control panel, PC or other devices thanks to the VE.Direct port. Also note the VictronConnect app for Android and IOS, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the VE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events. Required accessories Please note that an AC connection cable is required to connect the Phoenix Smart Charger 12/50(1+1) IP43 to the power grid. This is not included in the scope of delivery. Scope of delivery 1x PSC125051085 Victron Phoenix Smart Charger 12/50(1+1) IP43 1x AC cable clamp 1x User manual
€410,00
Victron Victron Orion-Tr 12/24-5 isolated DC DC converter 12V to 24V 5A 120W
The Victron Orion-Tr 12/24-5 (MPN ORI122410110) is an isolated DC DC voltage converter and ensures a regulated direct voltage and thus trouble-free operation of your DC consumers. The device converts the DC input voltage (8-17V) into an adjustable output voltage (20-30V) and delivers a constant continuous current of 5A, which corresponds to an output of 120W. This means you can supply every 12V consumer with exactly the right voltage. For many sensitive electronic devices, maintaining the exact operating voltage is essential for flawless function. The Orion-Tr 12/24-5 can also be connected in parallel with identical devices and has a remote-controlled on/off switch. Important features of the Orion-Tr 12/24-5 120W (with galvanic isolation) 12V DC operating voltage, adjustable output voltage 20-30V can be connected in parallel with similar devices to increase performance remote-controlled on/off switch Protection class IP43 Wide input voltage range: 8V – 17V 120W power at 5A continuous current max. 6.3A output current high efficiency of 87% only 0.42 KG weight Not designed to charge batteries. Please consider using an Orion-Tr Smart to charge the batteries. DC-DC converters of the Orion family generate a clean output voltage in the range of 20 - 30V DC from a 12V power source and compensate for possible line losses as well as fluctuations in the battery voltage. remote control on/off switch The remote on/off connection eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power-saving switch or by the motor's run/stop switch (see manual). can be connected in parallel to increase the output current An unlimited number of identical devices can be connected in parallel to increase the output power. Scope of delivery: 1x Victron Energy ORI122410110 Orion 12/24-5 DC DC converter 12V to 24V (20-30V adjustable) 5A 120W
€59,23
Victron Victron AGM 12V 220Ah deep cycle battery
The AGM 12V 220Ah deep-cycle battery from Victron Energy (MPN BAT412201084) is characterized by high cycle stability and, due to its low internal resistance, is ideal for applications with high-current discharge, such as when operating an inverter in a solar system. Features of the Victron 12V 220Ah Deep Cycle AGM Battery Victron Part Number: BAT412201084 Battery nominal voltage: 12V Battery capacity: 220Ah Lifespan at 20°C 7-10 years Cycles at 20°C and 30% discharge: 1500 Cycles at 20°C and 50% discharge: 600 Cycles at 20°C and 80% discharge: 400 low internal resistance very good tolerance of high current discharge Weight: 65 kg, dimensions (WxLxH): 52.2 x 23.8 x 24 cm Typical areas of application of Applications with high current discharge, for example solar systems with inverter on the solar battery Perfect for use as a starter battery Drive battery Thrusters, winches etc. Low self-discharge Thanks to the use of high-purity materials and lead-calcium grids in the Victron AGM 12V 220Ah battery, the self-discharge of this battery is particularly low. This prevents the battery from discharging too quickly during longer periods without charging. Perfect contact: equipped with M8 copper cable lug The deep-cycle battery 12V 220Ah offers the best possible contact thanks to the permanently integrated copper cable lugs and thus ensures a perfect current flow, without any loss of performance due to a poor battery connection. Scope of delivery: 1x Victron Energy BAT412201084 AGM 12V 220Ah deep cycle battery
€465,00
Victron Victron Multi RS Solar 48/6000/100-450/100 Dual Hybrid Inverter
The Multi RS Solar 48/6000/100-450/100 Dual (MPN PMR482602020) from Victron Energy's renowned product range combines the functions of a hybrid inverter and a battery charger in an extremely powerful device combination to meet your energy needs efficiently and reliably. In mid-2023, the original single MPPT tracker was further developed into this dual MPPT tracker model with two independent MPPT tracker inputs for a total of 6 kWp PV power. Thanks to high frequency technology and a new design, the powerful device combination weighs only 11 kg, has excellent efficiency, low standby power and is also very quiet in operation. Dual model with 4 operating modes Hybrid mode: Stores excess solar energy in a battery for use at night or during times of high demand. Provides additional power from the battery when demand exceeds grid capacity. Backup Mode: Switches to backup mode during a power failure. Off-grid mode: Works without a power connection. Generator Mode: Controls the generator to minimize run time. Provides additional power from the battery when demand exceeds the generator's capacity. The Victron Multi RS Solar Hybrid inverter/charger Dual MPPT tracker and 6000 VA power Efficient battery charging, pulse width modulation (PWM) Protective functions: Device fuse FKS MasterBus compatible: integration into energy management systems Versatile applications Programmable relay Energy optimization through feed-in User-friendly, intuitive display Powerful and flexible The state-of-the-art device combination offers an impressive peak power of 6000 VA (watts), which can handle even demanding applications such as powering household appliances, office equipment or electric vehicles. Not only does it provide a reliable power supply, it also allows you to feed excess energy back into the batteries and thus increase self-consumption. With an input voltage of 48 V and a charging current of 100 A, this device enables fast and efficient charging of your batteries. The integrated pulse width modulation (PWM) for charging voltage control ensures optimal charging of your batteries, while the device fuse FKS (Fast-Blow Fuse) protects the device and your energy system from overload and short circuits. PowerControl and PowerAssist The PowerControl function limits the maximum mains or generator current to make the Multi RS consider other AC loads. It then only uses excess power to charge the battery, preventing overloads. The PowerAssist function ensures that batteries are immediately supported during short-term load peaks and charged when the load is reduced. Easy operation and monitoring With a user-friendly display and intuitive interface, you can easily monitor and adjust the operating status and settings, as well as the battery, inverter and solar parameters, of the Victron Multi RS Solar 48/6000/100-450/100 Dual. Thanks to MasterBus compatibility, you can seamlessly integrate the device into a smart energy management system and also centrally control multiple devices with a smartphone or other Bluetooth-enabled device via the VictronConnect app. Technical data: Inverter: DC input voltage range: 38-62 V AC output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1 % Max. continuous current: 25 A AC Max. output power: 5300 W at 52 VDC Peak power: 9 kW for 3 s / 7 kW for 4 min Short circuit output current: 45 A Max. AC output overcurrent protection: 30 A Efficiency: 96.5% at 1kW load Solar: Max. PV test voltage: 450 V Starting voltage: 120 V MPPT operating voltage range 80-450 V Max. operational PV input current limit: 13 A Max. PV conversion power: total 6 kW - 3 kW per tracker Max. PV short circuit current: 16 A Earth fault trip level: 30 mA Insulation failure level: 100 kΩ Charger: Nominal voltage: 230 VAC Input voltage range: 187-265 VAC Nominal frequency: 50 Hz Input frequency: 45-65 Hz AC inrush current: Nz programmable charging voltage range: 36-60 V Charging voltage "constant voltage": 57.6 V (adjustable) "Trick" charging voltage: 55.2 V (adjustable) Max. charging current from AC: 88 A @ 57.6 VDC Max. charging current total (AC+PV): 100 A DC Battery temperature sensor: included Battery voltage sensor: yes General: Additional output (AC-out-2): yes Three-phase and parallel operation: 2x 2023 Q4 Connections: VE.Direct, VE.Can & Bluetooth Bluetooth frequency and power: 2402-2480 MHz, 4 dBm Operating temperature range -40 to +65 °C Maximum altitude 2000 m Humidity: max. 95% non-condensing Protection class: IP21 Battery connection: M8 bolt PV connection: 2 strings with MC4 230VAC connection: screw terminals 10 mm² (6 AWG) Dimensions: 425 × 460 × 125 mm Weight: 12.3kg Scope of delivery: 1× Victron Multi RS Solar 48/6000/100-450/100 Dual
€1.716,00
Victron Victron Blue Smart 12/7 IP67 12V 230V battery charger
The Blue Smart IP 67 12/7 12V 230V battery charger from Victron Energy (MPN BPC120713006) is a smart, high-performance battery charger of the latest generation with 7A charging current for charging 12V AGM, gel and lead-acid batteries as well as lithium ion batteries. In terms of functionality, the Blue Smart IP67 series is, with a few exceptions, identical to the chargers in the Blue Smart IP 65 and IP 22 device families. Only the operating environment for which these chargers are designed differs. Thanks to integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new features become available. Key features of the Blue Smart IP67 12/7 Battery Charger Victron Part Number: BPC120713006 Model name: Blue Smart IP 67 12/7 Max. charging current: 7A for battery voltage: 12V DC for mains voltage: 180-265 VAC 45-65 Hz Fully encased: waterproof, shockproof and fire retardant Smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage charging algorithm extends the life of your batteries thanks to integrated storage mode can be used to supply power to 12V consumers high-quality housing made of cast aluminum Protection against application errors: reverse polarity on battery (fuse), protection against overtemperature, protection against output short circuit Fully encased: waterproof, shockproof and fire retardant Water, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are coated with resin. One of the highest charging efficiencies ever! Setting a new industry standard: With an efficiency of at least 92% or more, these chargers produce three to four times less heat. Adaptive 5-stage charging algorithm The Blue Smart charger is characterized by its microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adapted to the type of battery use. "Bulk" (constant current phase) "Absorption" (constant voltage phase) "Recondition" (regeneration phase) "Float" (float voltage phase) "Storage" (storage mode) Storage mode: Less maintenance and aging when the battery is idle Storage mode is activated whenever no discharge has occurred within 24 hours. In storage mode, the float charge voltage is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This creates a type of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Key differences to the Blue Smart IP 65 family The two device groups differ in the following points: the protection class, the IP 67 devices have the best possible protection Blue Smart IP 65 devices have a 7-stage charging algorithm, the IP67 has 5 stages Scope of delivery: 1x Victron BPC120713006 Blue Smart IP67 12/7 7A 12V 230V battery charger 1x User manual 1x 1.5m battery connection cable red/black
€101,00
Victron Victron Orion-Tr 48/12-9 isolated DC DC converter 48V to 12V 9A 110W
The Victron Orion-Tr 48/12-9 (MPN ORI481210110) is an isolated DC DC voltage converter and ensures a regulated direct voltage and thus trouble-free operation of your DC consumers. The device converts the DC input voltage (32-70V) into an adjustable 12V output voltage (10-15V) and delivers a constant continuous current of 9A, which corresponds to an output of 110W. This means you can supply every 12V consumer with exactly the right voltage. For many sensitive electronic devices, maintaining the exact operating voltage is essential for flawless function. The Orion-Tr 48/12-9 can also be connected in parallel with identical devices and has a remote-controlled on/off switch. Important features of the Orion-Tr 48/12-9 110W (with galvanic isolation) 48V DC operating voltage, adjustable 12V output voltage 10-15V can be connected in parallel with similar devices to increase performance remote-controlled on/off switch Protection class IP43 wide input voltage range: 32V – 70V 110W power at 9A continuous current max. 12.5A output current high efficiency of 87% only 0.42 KG weight Not designed to charge batteries. Please consider using an Orion-Tr Smart to charge the batteries. DC-DC converters of the Orion family generate a clean output voltage in the range of 10 - 15V DC from a 48V power source and compensate for possible line losses as well as fluctuations in the battery voltage. Remote control on/off switch The remote on/off connection eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power-saving switch or by the motor's run/stop switch (see manual). Can be connected in parallel to increase the output current An unlimited number of identical devices can be connected in parallel to increase the output power. Scope of delivery: 1x Victron Energy ORI481210110 Orion 48/12-9 DC DC converter 48V to 12V (10-15V adjustable) 9A 120W
€68,00
Victron Victron SmartSolar MPPT 250/85-Tr charge controller VE.Can
The Smartsolar MPPT 250/85-tr from Victron Energy (MPN SCC125085210) is part of the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new device class. In addition, this model can operate in parallel with other controllers of the same type. Compared to the Smartsolar 150/..... series, the 250/.... series can handle a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar controller family was able to increase efficiency by a further 1 percent to a total of 99%, thereby setting new standards across the industry. This value is currently the best of all solar charge controllers that we know of. Compared to the BlueSolar family, the Bluetooth module is already permanently integrated into the controller in the 250 Smartsolar series, which makes the Smart Dongle superfluous on this device if you want to analyze and configure the controller via Bluetooth using a smartphone or tablet. Also new is the optionally available LCD display, which can be easily plugged onto the SmartSolar 150/85-tr when required. The display then provides all the important information about the controller. If required, the MPPT WireBox-XL Tr from Victron Energy is the ideal addition to your SmartSolar charge controller . It safely covers the cable entries or the connection terminals of the controller and thus protects them from external influences and contact. Key product features of the SmartSolar 250/85-Tr 85A 12V 24V 48V MPPT Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies Automatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllers with optional LCD display Built-in Bluetooth module for app-based analysis and configuration of the controller (via free Victron app on compatible devices) optional LCD display available max. PV power: 12V 1200W / 24V 2400W / 48V 4900W Max. rated charging current 85A, 150V maximum PV open circuit voltage Max. PV input current: 250 volts Integrated VE.Direct data communication port for connection to additional devices such as the GX Color Control Panel or a Smart BMV battery monitor groundbreaking efficiency 99% Parallel operation with other 250/85 controllers possible Adjustable constant charging voltage Adjustable trickle charge voltage Suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries Fully programmable charging algorithms that can later be manually activated and switched via a switch on the housing integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm Remote controlled switching on and off possible via 2-pin plug Protection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor balances maintenance and constant charge voltage according to temperature Day/night time control and light dimming option Smart configuration and analysis via Victron Connect app Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the maximum power point in case of partial shading In case of partial shading, there may be two or more maximum power points ( MPP ) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP . However, this may not be the optimal MPP . The innovative algorithm of the SmartSolar controller will always maximize energy yield by adjusting to the optimal MPP . High-speed MPP tracker of the latest generation Especially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Optional LCD display available for retrofitting If you prefer to operate and configure the Smartsolar MPPT 250/85-tr directly, you can retrofit the Smartsolar Control SCC900600010 display. The display enables easy configuration of the controller via key input and also provides all important performance data at a glance. comprehensive electronic protection Protection against reversed battery connection PV backflow preventer Protection against overheating of the device Protection against short circuits Protection against reversed PV connection the VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are linked to the charge controller and thus offers the possibility of communication with additional devices Systempanel GX Color Control. The VE.Direct connection is intended for products where complete Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand shop. optionally available as a version with MC4 connectors The devices of classes 250/60-Tr to 250/100-Tr are also available as a version with MC4 connections on the solar side of the charge controller instead of the screw terminals. Scope of delivery 1x Victron SCC125085210 SmartSolar MPPT 250/85-tr 12V 24V 48V 85A charge controller 1x User manual
€498,00
Victron Victron BlueSolar MPPT 150/35 12V 24V 48V 35A
The Victron MPPT 150/35 (MPN SCC020035000) belongs to the large family of BlueSolar MPPT charge controllers and, like its big siblings, it also offers ultra-fast power tracking and can therefore increase the yield of your solar system. In addition to the greater charging and PV performance, this Blue differs even more from the next smaller model, the 100/30. The battery voltage range has also increased with the smallest 150 model, so that 48V battery banks can also be used. VE-Direct options for programming, real-time data and history display Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected to the Bluetooth Smart Dongles and the MPPT app or the GX Color Control via VE.Direct, for example. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as an option. High-speed MPP tracker of the latest generation Especially under overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In addition, the 150/35 features a number of other innovative technologies such as the VE.Direct communication port. Comprehensive electronic protection - Protection against reversed battery connection - PV backflow preventer - Protection against overheating of the device - Protection against short circuits - Protection against reversed PV connection Key product features of the BlueSolar 150/35 35A 12V 24V 36V 48V MPPT Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies Automatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllers Integrated VE.Direct data communication port for connection to additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable charging algorithms that can later be manually activated and switched via a switch on the housing Nominal charging current 35A, 150V maximum PV open circuit voltage 12V:500W/24V:1000W/36V:1500W/48V:2000W integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm Integrated temperature sensor balances maintenance and constant charge voltage according to temperature Day/night time control and light dimming option VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are linked to the charge controller and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron brand world. Scope of delivery 1x Victron SCC020035000 BlueSolar MPPT 150/35 12V 24V 36V 48V 35A charge controller User manual
€152,00
Victron Victron Phoenix Inverter 12/800 230V VE.Direct 700W 12V
The Victron Phoenix 12/800VE.Direct (MPN PIN121800200) is a small sine wave inverter with 700W continuous power. The device converts 12V direct current from your battery into 230V AC alternating current with a pure sine wave voltage and uncompromising power quality that is also ideal for sensitive electronic products. trend-setting efficiency and modern system communication The efficiency of the Phoenix is excellent and, thanks to the ECO mode, one of the highest in its class. Using the VE.Direct communication port, you can connect the device to a computer or smartphone with optional accessories and program some system parameters such as the switch-off voltage and switch-on voltage when the battery is empty completely freely! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter. The performance range of the Phoenix VE.Direct 12/800 series is currently unique on the market for the price and goes far beyond the capabilities of other devices in the same performance class. Technical features of the Phoenix 12/800 VE.Direct 700 watts continuous power at 230V 50Hz sine wave voltage 800 watts continuous power at non-linear load full control over almost all system parameters suitable for all common 12V batteries 230V AC power with pure sine wave delivers perfect power quality Freely programmable switch-on and switch-off thresholds freely adjustable output voltage in the range of 210 – 245V Technical highlights of the Phoenix VE.Direct series 250VA – 800VA VE.Direct connection allows the power converter to be connected to a computer (VE.Direct to USB interface cable required) or your smartphone on which you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Low battery alarm trigger and reset thresholds + Low battery shutdown and restart thresholds + Output voltage 210 - 245V + Low battery shutdown and restart thresholds + Frequency 50 Hz or 60 Hz + ECO mode on/off threshold and ECO mode sensor Integrated ECO mode: In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). If the load exceeds a preset threshold, the inverter remains switched on. Proven reliability of the power converter: The complete bridging with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). High inrush power: This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Remote on/off switching possible: A remote on/off switch can be connected with a two-pin plug or between the positive pole of the battery and the left contact of the two-pin plug. Scope of delivery: 1x Victron PIN121800200 Phoenix 12/800 12V to 230V 700W 50Hz 60Hz
€229,00
Victron Victron VE.Bus BMS V2 battery management system
The Victron Energy VE.Bus BMS V2 (MPN: BMS300200200) is the next generation of the VE.Bus BMS for Victron Lithium Smart batteries (LFP-Smart) 12.8V and 25.6V. Every single cell of a LiFePO4 battery must be protected against overvoltage, undervoltage and overtemperature. This is exactly the task that the VE.BUS BMS V2 takes on. The product is suitable for protecting 12V, 24V and 48V battery banks and works in an operating voltage range of 9 - 70 VDC. VE-BUS BMS V2 in combination with Victrons LiFePO4 batteries Victron LiFePO4 batteries have built-in cell balancing, temperature and voltage control (BTV). They are connected to the VE.Bus BMS V2 via two M8 round connector cable sets. The BTVs of several batteries can be chained together. They can be connected in series, parallel and both in series and parallel, which allows a battery bank of 12V, 24V or 48V to be designed. Up to 20 batteries in one system are possible, resulting in an energy storage of max. 84kWh in a 12V system and 102kWh in a 24V and 48V system. For further details, please refer to the technical documentation for our LiFePO4 battery. Core tasks of the Victron VE.Bus BMS V2 Specially designed for use with Victron Lithium Battery Smart 12.8V & 25.6V batteries. Communicates directly with the lithium battery via the battery’s M8 circular connector cables Switching off or disconnecting VE.Bus inverters or inverters/chargers via VE.Bus and other loads via the "Disconnect load" terminal in case of cell undervoltage Shutdown or disconnection of VE.Bus inverters or inverter/chargers via VE.Bus, VE.Direct and VE.Can solar chargers via a GX device and other chargers via the charger disconnect terminal in case of cell overvoltage, undertemperature or overtemperature. Difference to VE.Bus BMS The VE.Bus BMS V2 is specifically designed for use in systems with GX devices, making it perfect for ESS or backup applications with a battery capacity of up to 84kWh (12V) or 102kWh (24V/48V). The BMS V2 also has a remote contact for remote control (ON/OFF). Communication with VE.Bus products MultiPlus, Quattro or Phoenix inverters are connected to the “MultiPlus/Quattro” port using a standard RJ45 UTP cable. The BMS deactivates inversion in case of undervoltage of the cell and charging in case of overvoltage or overtemperature of the cell Communication with remote control devices A GX device (e.g. Cerbo GX), a Digital Multi Control (DMC) panel or a VE.Bus Smart Dongle (including any combination) can be connected to the BMS via the “Remote Control Panel” connector. This accessory can be used in combination with the BMS to remotely control the switching state of the VE.Bus inverter or the inverter/charger (On / Off / Charger only) Terminals for additional inputs and outputs The BMS has a dedicated power output (GX-Power) for a GX device and an additional power input (Aux-In) for an external DC power source, e.g. a mains adapter. In the event of a system shutdown, the GX device continues to be supplied with power via the auxiliary voltage input or is disconnected from the mains to prevent further battery discharge Technical data Input voltage range: 9-70VDC Current consumption - regular operation: 10mA (load break current not included) GX-Pow output: 1A Aux-In input: 1A VE.Bus interface: 2x RJ45 sockets for connection to all VE.Bus products Operating temperature range: -20°C - +50°C Humidity: max. 95% (non-condensing) Protection class: IP20 Weight: 120gr Dimensions: 105.5 x 94.5 x 23.8mm Scope of delivery: 1x Victron Energy BMS300200200 VE.Bus BMS V2 Battery Management System 1x User manual
€167,00
Victron Victron charging station electric vehicle EV
The EV charging station from Victron Energy can be used in both 3-phase and 1-phase mode. It delivers a maximum of 22kW AC in 3-phase mode or 7.3kW in 1-phase mode. The station can be monitored and controlled using the integrated LCD touchscreen. An external residual current device is required for protection (not included). A cable cross-section of 6mm² is recommended for the installation cable. A qualified electrician should be consulted for the connection. Important features High charging performance Wi-Fi communication LCD touchscreen Illuminated ring for quick display of device status Configurable price/kWh calculator Two working modes available Integration with GX devices possible Integration with VRM portal possible Two working modes to choose from You can choose between manual and automatic mode. Automatic mode detects when excess energy is available and only uses that energy to charge the vehicle. Manual mode allows a configurable output current between 6-32A. The charging power can be controlled either via the slider on the LCD touchscreen or via the website. It allows charging to be started or stopped manually when a vehicle is connected to the charging station. Programmable light ring The fully programmable light ring around the charging port provides the current device status quickly and easily. It can be programmed via the web interface to display different light effects depending on the current state (charging, charged, disconnected, etc.). This allows the user to see the current charging status even from a distance. There are 55 different light effects available. Technical data Input voltage range: 170-265 V/AC Nominal charging current: 32A / phase Rated power: 22kW Current output range: 6-32A Own consumption: 15mA at 230V Operating temperature range: -25°C - +50°C Protection class: IP44 Weight: 3kg Dimensions: 390 x 300 x 150 mm Scope of delivery: 1x Victron Energy EV charging station
€510,00
Victron Victron SmartSolar MPPT 150/85-Tr charge controller VE.Can
The Smartsolar MPPT 150/85-tr from Victron Energy (MPN SCC115085411) is part of the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new class of device. The devices in classes 150/45tr to 150/100-tr are also available as a version with MC4 connections on the solar side of the charge controller instead of screw terminals. This model can also be operated in parallel with other controllers of the same type. In comparison to the BlueSolar series, the Bluetooth module in the Smartsolar family is already integrated into the controller, which makes the Smart Dongle superfluous with this device. Also new is the optionally available LCD display, which can simply be plugged onto the SmartSolar 150/85-tr when required. The display then provides all the important information about the controller. If required, the MPPT WireBox-XL Tr from Victron Energy is the ideal addition to your SmartSolar charge controller . It safely covers the cable inputs and the connection terminals of the controller, protecting them from external influences and contact. Key product features of the SmartSolar 150/85-Tr 85A 12V 24V 36V 48V MPPT Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies Automatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllers with optional LCD display Built-in Bluetooth module for app-based analysis and configuration of the controller (via free Victron app on compatible devices) optional LCD display available Integrated VE.Direct & VE.Can data communication port for connection to additional devices such as the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/85 controllers possible Adjustable constant charging voltage Adjustable trickle charge voltage Suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries Fully programmable charging algorithms that can later be manually activated and switched via a switch on the housing Nominal charging current 85A, 150V maximum PV open circuit voltage maximum PV power: 12V 1200W / 24V 2400W / 48V 4900W integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm Remote controlled switching on and off possible via 2-pin plug Protection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor balances maintenance and constant charge voltage according to temperature Day/night time control and light dimming option Smart data communication via VE.Direct and lightning-fast Bluetooth module Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the maximum power point in case of partial shading In case of partial shading, there may be two or more maximum power points ( MPP ) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP . However, this may not be the optimal MPP . The innovative algorithm of the SmartSolar device will always maximize energy yield by adjusting to the optimal MPP . High-speed MPP tracker of the latest generation Especially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Comprehensive electronic protection Protection against reversed battery connection PV backflow preventer Protection against overheating of the device Protection against short circuits Protection against reversed PV connection The VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are linked to the charge controller and thus offers the possibility of communication with additional devices Systempanel GX Color Control. The VE.Direct connection is intended for products where complete Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand shop. Scope of delivery 1x Victron SCC115085411 SmartSolar MPPT 150/85-Tr 12V 24V 36V 48V 85A charge controller User manual
€410,00
Victron Victron Phoenix Inverter 12/1200 230V VE.Direct 1000W 12V
The Victron Phoenix 12/1200VE.Direct (MPN PIN122120200) is a small sine wave inverter with 1200W continuous power. The device converts 12V direct current from your battery into 230V AC alternating current with a pure sine wave voltage and uncompromising power quality that is also ideal for sensitive electronic products. trend-setting efficiency and modern system communication The efficiency of the Phoenix is excellent and, thanks to the ECO mode, one of the highest in its class. Using the VE.Direct communication port, you can connect the device to a computer or smartphone with optional accessories and program some system parameters such as the switch-off voltage and switch-on voltage when the battery is empty completely freely! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter. The performance range of the Phoenix VE.Direct 12/1200 series is currently unique on the market for the price and goes far beyond the capabilities of other devices in the same performance class. Technical features of the Phoenix 12/1200 VE.Direct 1000 watts continuous power at 230V 50Hz sine wave voltage 1200 watts continuous power at non-linear load full control over almost all system parameters suitable for all common 12V batteries 230V AC power with pure sine wave delivers perfect power quality Freely programmable switch-on and switch-off thresholds freely adjustable output voltage in the range of 210 – 245V Technical highlights of the Phoenix VE.Direct series 250VA – 1200VA VE.Direct connection allows the power converter to be connected to a computer (VE.Direct to USB interface cable required) or your smartphone on which you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Low battery alarm trigger and reset thresholds + Low battery shutdown and restart thresholds + Output voltage 210 - 245V + Low battery shutdown and restart thresholds + Frequency 50 Hz or 60 Hz + ECO mode on/off threshold and ECO mode sensor Integrated ECO mode: In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). If the load exceeds a preset threshold, the inverter remains switched on. Proven reliability of the power converter: The complete bridging with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). High inrush power: This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Remote on/off switching possible: A remote on/off switch can be connected with a two-pin plug or between the positive pole of the battery and the left contact of the two-pin plug. Scope of delivery: 1x Victron PIN122120200 Phoenix 12/1200 12V to 230V 1000W 50Hz 60Hz
€303,00
Victron Victron BlueSolar MPPT 100/50 12V 24V 50A
The Victron MPPT 100/50 (MPN SCC020050200) belongs to the large family of BlueSolar MPPT charge controllers and, like its big siblings, it also offers ultra-fast power tracking and can therefore increase the yield of your solar system. In addition to the greater charging and PV power, this Blue even more from the next smaller model, the 100/30. More protection compared to the smaller models of the BlurSolar Mppt series Compared to the 75/10, 75/15 and 100/15 models, the BlueSolar 100/50 Mppt has an overheating protection with a switch-off function and automatic restart after a normal operating temperature is reached. There is also a PV reverse current protection that can only be found in this device in the Blue MPPT family. High-speed MPP tracker of the latest generation Especially under overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In addition, the 100/50 features a number of other innovative technologies such as the VE.Direct communication port. Options for programming, real-time data and history display Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected to the Bluetooth Smart Dongles and the MPPT app or the GX Color Control via VE.Direct, for example. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as an option. Key product features of the BlueSolar 100/50 50A 12V 24V MPPT Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies Automatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllers Integrated VE.Direct data communication port for connection to additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable charging algorithms that can later be manually activated and switched via a switch on the housing Nominal charging current 50A, 100V maximum PV open circuit voltage 700W maximum PV power at 12V, 1400W at 24V systems integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm Integrated temperature sensor balances maintenance and constant charge voltage according to temperature Day/night time control and light dimming option VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are connected to the charge controller and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron brand world. Scope of delivery 1x Victron SCC020050200 BlueSolar MPPT 100/50 12V 24V 50A charge controller User manual
€152,00
Victron Victron Orion-Tr 12/24-10 240W DC-DC voltage converter isolated
The Orion-Tr 12/24-10 from Victron Energy (MPN ORI122424110) is a galvanically isolated DC-DC voltage converter and ensures a regulated direct voltage and thus trouble-free operation of your DC consumers. The compact Orion-TR DC-DC voltage converter converts the DC input voltage (8-17V) into an adjustable 24V output voltage (20-30V) and delivers a constant continuous current of 10A, which corresponds to an output of 240W. Thanks to the Orion-Tr 12/24-10, you can supply every 24V consumer with exactly the right voltage. The correct voltage is guaranteed even with longer cables, as the Orion can adjust the voltage to any cable losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. The Orion-Tr 12/24-10 can also be connected in parallel with devices of the same design and has a remote-controlled on/off switch. Key features of the Orion-Tr 12/24-10 240W (with galvanic isolation) Victron Energy Part Number: ORI122424110 for 12V battery voltage, adjustable output voltage 20-30V max. 240W output power at a maximum current of 10A wide input voltage range: 8-17V Protection class IP43, galvanic isolation 200V DC between input, output and housing can be connected in parallel with similar devices to increase performance remote-controlled on/off switch high efficiency of 87% Not designed to charge batteries. Please consider using an Orion-Tr Smart to charge the batteries. Remote control on/off switch The remote on/off connection eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power-saving switch or by the motor's run/stop switch (see manual). Scope of delivery: 1x Victron Energy ORI122424110 Orion-Tr 12/24-10 10A 240W DC-DC voltage converter
€123,00
Victron Victron Blue Smart IP22 12/30(3) Charger 12V 30A 3 batteries
The Blue Smart IP22 12/30(3) charger from Victron Energy (MPN BPC123044002) is a professional, compact 12V 30A battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart IP22 12/30(3) charger can be with equipment in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and mobile homes and charges both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/30(3) Blue Smart IP22 Charger Intelligent charging until the battery reaches its perfect state... The seven-stage charging algorithm gets the most out of your battery. The charger delivers the energy the battery needs, keeps it in a healthy state, ensures better performance... and a longer life. Restoration of deeply discharged batteries Unlike most other brands and ranges, the Blue Smart IP22 charger will attempt to recharge a deeply discharged battery by forcing a low charge current through it. Normal charging will then resume once sufficient voltage is present between the battery terminals. View battery status remotely with the VictronConnect app The Blue Smart IP22 12/30(3) charger has built-in Bluetooth. This allows you to check the status of the charger and battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app. The main technical features of the 12/30(3) Blue Smart IP22 Charger Victron Part Number: BPC123044002 charges 12V lead-acid, gel, AGM and lithium batteries 30A maximum charging current 3 battery charging outputs very compact dimensions: 235 x 108 x 65mm highly modern, seven-stage loading algorithm with integrated Bluetooth for use with the free VictronConnect app Other features of the 12/30(3) Blue Smart IP22 battery charger Trend-setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat than the industry standard. Additionally, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 7-stage charging algorithm The 12/30(3) Blue Smart charger is characterized by its microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adapted to the type of battery use. Storage mode: Less maintenance and aging when the battery is idle Storage mode is activated whenever no discharge has occurred within 24 hours. The float charge voltage is then reduced to 2.2V/cell (13.2V for a 12V battery) to minimize gassing and prevent corrosion of the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This creates a kind of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC123044002 12/30(3) IP22 Blue Smart Charger 1x User manual
€221,00
Victron Victron Smartsolar MPPT 100/15 15A 12V 24V solar charge controller
The Smartsolar 100/15 from Victron Energy (MPN SCC110015060R) is an MPPT solar charge controller with 15A max. charging current for charging 12V and 24V batteries. In contrast to the Bluesolar 100/15, the Smart version has integrated Bluetooth, which makes the purchase of a Bluetooth dongle unnecessary. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control GX or the MPPT Control. The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. The optional MPPT WireBox-S 100-15 from Victron Energy is the ideal addition to your SmartSolar charge controller . It safely covers the cable inputs and the connection terminals of the controller and thus protects them from external influences and contact. The most important technical features at a glance 15A max. charging current, suitable for 12V and 24V batteries Nominal PV power for 12V systems: 220W Nominal PV power for 24V systems: 440W 15A load output high peak efficiency of 98% Freely programmable battery charging algorithm (via the free Victron Connect APP) Light dimming functions programmable (via the free Victron Connect APP) Ultra-fast maximum power point tracking Max. PV open circuit voltage: 100V Charging algorithm: multi-stage, adaptive integrated Bluetooth module Ultra-fast maximum power point tracking Especially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. intelligent load output Deep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a predefined voltage value. Alternatively, an algorithm for intelligent battery management can be selected: see BatteryLife. The load output is short-circuit proof. Battery Life: intelligent battery management If the solar charge controller is not able to charge the battery to its full capacity within a day, the battery status will constantly cycle between "partially charged" and "end of discharge". This mode of operation (no regular full charging) will damage a lead-acid battery within a few weeks or months. The Battery Life algorithm monitors the battery's state of charge and, if necessary, increases the load disconnection threshold day by day (i.e., the load is disconnected earlier) until the energy harvested is sufficient to charge the battery to nearly 100%. From this point, the load disconnection threshold is modulated so that near 100% charging is achieved approximately once a week. Scope of delivery: 1x Victron Energy SCC110015060R Smartsolar MPPT 100/15 15A 12V 24V solar charge controller 1x User manual
€76,00
Victron Victron Orion-Tr 24/12-20 240W DC DC converter
The Victron Orion 24/12-20 240W (MPN ORI241220200R) DC DC converter ensures a regulated direct voltage and thus trouble-free operation of your electronic DC consumers. The 24/12 converts 24V direct current into 12V direct current and delivers a constant continuous current of 20A, which corresponds to an output of 240W. It delivers a clean 12V output voltage and compensates for any line losses and fluctuations in the battery voltage. Important features of the Orion-Tr 24/12 20A 240W 24V DC operating voltage, 12V DC output voltage wide input voltage range: 18V – 36V 240W power at 20A continuous current Version not isolated Scope of delivery: 1x Victron ORI241220200R Orion 24/12-20 DC DC converter 24V to 12V 20A 240W
€51,00
Victron Victron BlueSolar MPPT 150/45 12V 24V 48V 45A
The Victron MPPT 150/45 (MPN SCC010045222) belongs to the large family of BlueSolar MPPT charge controllers and offers a wide range of performance for the demanding user. Ultra-fast power tracking and automatic adjustment of the MPP voltage in the event of partial shading are just two of the many highlights of this device class. The devices in classes 150/45 to 150/100tr are also available as a version with MC4 connections on the solar side of the charge controller instead of screw terminals. This model can also be operated in parallel with other controllers of the same type. VE-Direct options for programming, real-time data and history display Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected to the Bluetooth Smart Dongles and the MPPT app or the GX Color Control via VE.Direct, for example. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as an option. Advanced maximum power point detection in partial shading In case of partial shading, there may be two or more maximum power points ( MPP ) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP . However, this may not be the optimal MPP . The innovative algorithm of the BlueSolar device will always maximize energy yield by adjusting to the optimal MPP . Key product features of the BlueSolar 150/45 45A 12V 24V 36V 48V MPPT Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies Automatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllers Integrated VE.Direct data communication port for connection to additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Parallel operation with other 150/45 controllers possible adjustable constant charging voltage adjustable trickle charge voltage Suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries tr version = connection of the solar modules via screw terminals (max. 35mm²) Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 45A, 150V maximum PV open circuit voltage maximum PV power: 12V: 650W - 24V 1300W - 48V 2600W integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm Protection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor balances maintenance and constant charge voltage according to temperature Day/night time control and light dimming option High-speed MPP tracker of the latest generation Especially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Comprehensive electronic protection - Protection against reversed battery connection - PV backflow preventer - Protection against overheating of the device - Protection against short circuits - Protection against reversed PV connection VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are linked to the charge controller and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron brand world. Scope of delivery 1x Victron SCC010045222 BlueSolar MPPT 150/45 12V 24V 36V 48V 45A charge controller User manual
€382,00
Victron Victron SmartSolar MPPT 150/70-Tr VE.Can charge controller
The Smartsolar MPPT 150/70-Tr VE.Can from Victron Energy (MPN SCC115070411) is part of the latest generation of smart charge controllers from the Dutch premium manufacturer. The controller processes a whopping 70A of solar power and can work flexibly with 12/24/36/48V batteries. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new device class. VE.Can is particularly suitable for systems with multiple solar chargers; up to 25 controllers can be synchronized with it. In comparison to the BlueSolar series, the Bluetooth module in the Smartsolar family is already integrated into the controller, which makes the Smart Dongle superfluous with this device. Also new is the optionally available LCD display, which can simply be plugged onto the SmartSolar 150/70-Tr VE.Can when required. The display then provides all the important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar charge controller . It safely covers the cable inputs and the connection terminals of the controller, protecting them from external influences and contact. About the SmartSolar MPPT 150/70-Tr VE.Can Ultra-fast MPP tracker of the latest generation ensures the best possible yield Parallel operation with other VE.Can controllers Adjustable constant charge voltage and trickle charge voltage suitable for all AGM, GEL, lead-acid and lithium batteries fully programmable charging algorithms multi-stage and adaptive charging algorithm remote controlled switching on and off integrated temperature sensor programmable relay optional LCD display available Smart data communication via VE.Direct and lightning-fast Bluetooth module Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the maximum power point in case of partial shading In case of partial shading, there may be two or more maximum power points ( MPP ) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP , but this may not be the optimal MPP . The innovative algorithm of the SmartSolar device will always maximize energy yield by adjusting to the optimal MPP . High-speed MPP tracker of the latest generation Especially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Comprehensive electronic protection Protection against reversed battery connection PV backflow preventer Protection against overheating of the device Protection against short circuits Protection against reversed PV connection The VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are linked to the charge controller and thus offers the possibility of communication with additional devices Systempanel GX Color Control. The VE.Direct connection is intended for products where complete Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand shop. Technical data Nominal charging current: 70A Maximum PV open circuit voltage: 150V high maximum efficiency of 98% Max. short circuit current: 50A maximum PV power: 12V 1000W / 24V 2000W / 48V 4000W Protection class IP 43 (electrical components) and protection class IP 22 (connection area) Weight: 3kg Dimensions: 185 x 250 x 95 mm Scope of delivery 1x Victron SCC115070411 SmartSolar MPPT 150/70-Tr 70A charge controller
€376,00
Victron Victron BlueSolar MPPT 75/15 12V 24V 15A
The Victron MPPT 75/15 (MPN SCC010015050R) belongs to the large family of BlueSolar MPPT charge controllers and, like its big siblings, it also offers ultra-fast power tracking and can therefore increase the yield of your solar system. MPP tracker of the latest generation Especially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. The 75/15 also features a number of other innovative technologies. Options for programming, real-time data and history display Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected to the Bluetooth Smart Dongles and the MPPT app or the GX Color Control via VE.Direct, for example. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as an option. Key product features of the BlueSolar 75/15 15A 12V 24V MPPT Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies Integrated VE.Direct data communication port for connection to additional devices such as Bluetooth Smart dongle or the GX Color Control Panel 12V 24V systems possible Nominal charging current 15A 220W maximum PV power at 12V, 440W at 24V systems Load output with 15A power and automatic load shutdown in case of impending battery undervoltage (deep discharge protection integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm programmable battery charging algorithm integrated Battery Life algorithm extends the life of your batteries if it is active and all loads run via the load output on the controller Day/night time control and light dimming option VE.Direct data communication port integrated VE.Direct in text mode transmits all important parameters every second to other devices that are linked to the charge controller and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products where complete Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron brand world in the information area. Battery Life algorithm helps increase battery life If the solar charge controller is not able to charge the battery to its full capacity within a day, the status of the battery will constantly switch between "partially charged" and "end of discharge". This operating mode (no regular full charging) is optimal for small lead batteries and, especially with lead-acid batteries, such irregular charging and discharging leads to damage to the battery after just a few months and the service life is sometimes shortened quite significantly. The Battery Life algorithm monitors the battery's state of charge and, if necessary, increases the load disconnection threshold day by day (i.e. the load is disconnected earlier) until the energy harvested is sufficient to charge the battery to nearly 100%. From this point, the load disconnection threshold is modulated so that the charge is near 100% approximately once a week. Scope of delivery 1x Victron SCC010015050R BlueSolar MPPT 75/15 12V 24V 15A charge controller 1x User manual
€49,00
You have seen 216 out of 319 products