Growatt Growatt 3PH Hybrid Inverter MOD 9000TL3-XH(BP)
Battery ready for use, future-proof Dual MPP trackers Type II SPD on DC and AC side With Back Up (BP) function 24-hour monitoring of own consumption
€1.141,00
Growatt Growatt 3PH Hybrid Inverter MOD 8000TL3-XH(BP)
Battery ready for use, future-proof Dual MPP trackers Type II SPD on DC and AC side With Back Up (BP) function 24-hour monitoring of own consumption
€1.100,00
Growatt Growatt 3PH Hybrid Inverter MOD 7000TL3-XH(BP)
Battery ready for use, future-proof Dual MPP trackers Type II SPD on DC and AC side With Back Up (BP) function 24-hour monitoring of own consumption
€1.059,00
Growatt Growatt 3PH Hybrid Inverter MOD 6000TL3-XH(BP)
Battery ready for use, future-proof Dual MPP trackers Type II SPD on DC and AC side With Back Up (BP) function 24-hour monitoring of own consumption
€922,00
Growatt Growatt 3PH Hybrid Inverter MOD 4000TL3-XH(BP)
Battery ready for use, future-proof Dual MPP trackers Type II SPD on DC and AC side With Back Up (BP) function 24-hour monitoring of own consumption
€837,00
Growatt Growatt 3PH Hybrid Inverter MOD 3000TL3-XH(BP)
Battery ready for use, future-proof Dual MPP trackers Type II SPD on DC and AC side With Back Up (BP) function 24-hour monitoring of own consumption
€795,00
Growatt Growatt 3PH Hybrid Inverter MOD 10KTL3-XH (BP)
Battery ready for use, future-proof Dual MPP trackers Type II SPD on DC and AC side With Back Up (BP) function 24-hour monitoring of own consumption
€1.151,00
Growatt Growatt 3PH Hybrid Inverter MID 30KTL3-XH
The Growatt MID 30KTL3-XH hybrid inverter is a popular inverter for residential use. The inverter is suitable for exchanging energy with the power grid and for integrating into a battery system. The Growatt MID 30KTL3-XH belongs to the MID KTL3-XH series, a range of hybrid inverters that can handle solar systems with a capacity of 3 to 30 kWp. The MID 30KTL3-XH is the most powerful model in the family, but despite its compact size, it is a powerhouse with excellent performance. Features of the Growatt MID 30KTL3-XH hybrid inverter The Growatt MID 30KTL3-XH hybrid inverter is equipped with 2 MPP trackers that ensure optimal performance of the solar modules, even if the array is partially in the shade. The performance of this Growatt inverter series is outstanding: they achieve a maximum efficiency of 98.75%, making them among the best inverters on the market. With the IP66 classification, the inverters are protected against all weather conditions. The weight has been limited to 31 kilograms and due to their handy size, the inverters in this Growatt series can also be installed by one person. If you decide to purchase the Growatt MID 30KTL3-XH hybrid inverter in combination with a home battery system, the Growatt APX HV system (5 kWh ~ 60 kWh) will work seamlessly with this hybrid inverter.
€2.021,00
Growatt Growatt 3PH Hybrid Inverter MID 25KTL3-XH
The Growatt MID 25KTL3-XH hybrid inverter is a popular inverter for residential use. The inverter is suitable for exchanging energy with the power grid and for integrating into a battery system. The Growatt MID 25KTL3-XH belongs to the MID KTL3-XH series, a range of hybrid inverters that can handle solar systems with a capacity of 3 to 30 kWp. The MID 25KTL3-XH is one of the more powerful models in the family, but despite its compact size it is a powerhouse with excellent performance. Features of the Growatt MID 25KTL3-XH hybrid inverter The Growatt MID 25KTL3-XH hybrid inverter is equipped with 2 MPP trackers that ensure optimal performance of the solar modules, even if the array is partially in the shade. The performance of this Growatt inverter series is outstanding: they achieve a maximum efficiency of 98.75%, making them among the best inverters on the market. With the IP66 classification, the inverters are protected against all weather conditions. The weight has been limited to 31 kilograms and due to their handy size, the inverters in this Growatt series can also be installed by one person. If you decide to purchase the Growatt MID 25KTL3-XH hybrid inverter in combination with a home battery system, the Growatt APX HV system (5 kWh ~ 60 kWh) will work seamlessly with this hybrid inverter.
€1.905,00
Growatt Growatt 3PH Hybrid Inverter MID 20KTL3-XH
The Growatt MID 20KTL3-XH hybrid inverter is a popular inverter for residential use. The inverter is suitable for exchanging energy with the power grid and for integrating into a battery system. The Growatt MID 20KTL3-XH is part of the MID KTL3-XH series, a range of hybrid inverters that can handle solar systems with a capacity of 3 to 30 kWp. The MID 20KTL3-XH is one of the more powerful models in the family, but despite its compact size it is a powerhouse with excellent performance. Features of the Growatt MID 20KTL3-XH hybrid inverter The Growatt MID 20KTL3-XH hybrid inverter is equipped with 2 MPP trackers that ensure optimal performance of the solar modules, even if the array is partially in the shade. The performance of this Growatt inverter series is outstanding: they achieve a maximum efficiency of 98.75%, making them among the best inverters on the market. With the IP66 classification, the inverters are protected against all weather conditions. The weight has been limited to 31 kilograms and due to their handy size, the inverters in this Growatt series can also be installed by one person. If you decide to purchase the Growatt MID 20KTL3-XH hybrid inverter in combination with a home battery system, the Growatt APX HV system (5 kWh ~ 60 kWh) will work seamlessly with this hybrid inverter.
€1.681,00
Growatt Growatt 3PH Hybrid Inverter MID 17KTL3-XH
The Growatt MID 17KTL3-XH hybrid inverter is a popular inverter for residential use. The inverter is suitable for exchanging energy with the power grid and for integrating into a battery system. The Growatt MID 17KTL3-XH belongs to the MID KTL3-XH series, a series of hybrid inverters that can handle solar systems with a power output of 3 to 30 kWp. The MID 17KTL3-XH is one of the mid-range models in the family, but despite its compact size, it is a powerhouse with excellent performance. Features of the Growatt MID 17KTL3-XH hybrid inverter The Growatt MID 17KTL3-XH hybrid inverter is equipped with 2 MPP trackers that ensure optimal performance of the solar modules, even if the array is partially in the shade. The performance of this Growatt inverter series is outstanding: they achieve a maximum efficiency of 98.75%, making them among the best inverters on the market. With the IP66 classification, the inverters are protected against all weather conditions. The weight has been limited to 31 kilograms and due to their handy size, the inverters in this Growatt series can also be installed by one person. If you decide to purchase the Growatt MID 17KTL3-XH hybrid inverter in combination with a home battery system, the Growatt APX HV system (5 kWh ~ 60 kWh) will work seamlessly with this hybrid inverter.
€1.577,00
Growatt Growatt 3PH Hybrid Inverter MID 15KTL3-XH
The Growatt MID 15KTL3-XH hybrid inverter is a popular inverter for residential use. The inverter is suitable for exchanging energy with the power grid and for integrating into a battery system. The Growatt MID 15KTL3-XH belongs to the MID KTL3-XH series, a range of hybrid inverters that can handle solar systems with a capacity of 3 to 30 kWp. The MID 15KTL3-XH is one of the mid-range models in the family, but despite its compact size, it is a powerhouse with excellent performance. Features of the Growatt MID 15KTL3-XH hybrid inverter The Growatt MID 15KTL3-XH hybrid inverter is equipped with 2 MPP trackers that ensure optimal performance of the solar modules, even if the array is partially in the shade. The performance of this Growatt inverter series is outstanding: they achieve a maximum efficiency of 98.75%, making them among the best inverters on the market. With the IP66 classification, the inverters are protected against all weather conditions. The weight has been limited to 31 kilograms and due to their handy size, the inverters in this Growatt series can also be installed by one person. If you decide to purchase the Growatt MID 15KTL3-XH hybrid inverter in combination with a home battery system, the Growatt APX HV system (5 kWh ~ 60 kWh) will work seamlessly with this hybrid inverter.
€1.438,00
Victron Victron Blue Smart IP22 12/15(3) Charger 12V 15A 3 batteries
The Blue Smart IP22 12/15(3) charger from Victron Energy (MPN BPC121544002) is a professional, compact 12V 15A battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart IP22 12/15(3) charger can be used with equipment in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and mobile homes and charges both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/15(3) Blue Smart IP22 Charger Intelligent charging until the battery reaches its perfect state... The seven-stage charging algorithm gets the most out of your battery. The charger delivers the energy the battery needs, keeps it in a healthy state, ensures better performance... and a longer life. Recovery of deeply discharged "dead" batteries Unlike most other brands and ranges, the Blue Smart IP22 charger will attempt to recharge a deeply discharged battery by forcing a low charge current through it. Normal charging will then resume once sufficient voltage is present between the battery terminals. View battery status remotely with the VictronConnect app The Blue Smart IP22 12/15(3) charger has built-in Bluetooth. This allows you to check the status of the charger and battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app. The main technical features of the 12/15(3) Blue Smart IP22 Charger Victron Part Number: BPC121544002 charges 12V lead-acid, gel, AGM and lithium batteries 15A maximum charging current 3 battery charging outputs very compact dimensions: 235 x 108 x 65mm highly modern, seven-stage loading algorithm with integrated Bluetooth for use with the free VictronConnect app Other features of the 12/15(3) Blue Smart IP22 battery charger Trend-setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat than the industry standard. Additionally, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 7-stage charging algorithm The 12/15(3) Blue Smart charger is characterized by its microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adapted to the type of battery use. Storage mode: Less maintenance and aging when the battery is idle Storage mode is activated whenever no discharge has occurred within 24 hours. The float charge voltage is then reduced to 2.2V/cell (13.2V for a 12V battery) to minimize gassing and prevent corrosion of the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This creates a kind of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC121544002 12/15(3) IP22 Blue Smart Charger 1x User manual
€157,00
Victron Victron AGM 12V 170Ah Super Cycle Battery C20
The 12V 170Ah Super Cycle battery Victron Energy (MPN BAT412117081) is based on the latest findings in battery electrochemistry and therefore offers significantly more cycles and high resistance to deep discharge. The use of a Super Cycle battery is recommended if an occasional discharge to 100% (deep discharge) or a more frequent discharge to 60-80% is to be expected. Truly innovative: the Victron AGM 12V 170Ah Victron's AGM Super Cycle batteries contain the latest innovations from current developments in battery electrochemistry. The paste on the positive plates does not soften so quickly, even if the battery has been discharged to 100% several times. In addition, the battery chemistry has been supplemented with a number of additives that significantly reduce sulfation in the event of a deep discharge. The bottom line is that these technical innovations mean that the Ultra Deep Cycle batteries manage significantly more cycles and therefore have a longer lifespan. Features of the Victron 12V 170Ah Super Deep Cycle AGM battery Victron Part Number: BAT412117081 Battery nominal voltage: 12V Battery capacity: 170Ah efficient, even after three hundred 100% deep discharges Lifespan at 20°C 7-12 years Cycles at 20°C and 40% discharge: 1000 Cycles at 20°C and 60% discharge: 700 Cycles at 20°C and 80% discharge: 500 Cycles at 20°C and 100% discharge: 300 low internal resistance smaller and lighter than conventional deep-cycle batteries very good tolerance of high current discharge Weight: 45 kg, dimensions (WxLxH): 17.2 x 33.6 x 28 cm Exceptional performance during repeated deep discharge Tests have shown that the Super Cycle battery is still efficient even after at least three hundred 100% deep discharges. During the test, the batteries were discharged daily to 10.8 V with I = 0.2 C20. They were then left in the discharged state for two hours and then recharged with I = 0.2 C20. Most batteries are damaged if they are left in the discharged state for two hours 100 times, but not the Victron 12V 170Ah Super Cycle battery. Super Cycle Batteries: Smaller and lighter Another advantage of the new chemical composition is that the batteries are smaller and weigh less compared to our previous deep cycle AGM batteries. Typical areas of application of Applications with high current discharge, for example solar systems with inverter on the solar battery Applications where complete deep discharge may occur from time to time or where more frequent discharges down to 60-80% are to be expected Perfect for use as a starter battery Drive battery Thrusters, winches etc. Low self-discharge Thanks to the use of high-purity materials and lead-calcium grids in the Super Cycle AGM 12V 170Ah, it is ensured that the self-discharge of this battery is particularly low. This prevents the battery from discharging too quickly during longer periods without charging. Scope of delivery: 1x Victron Energy BAT412117081 AGM 12V 170Ah Super Cycle battery
€480,00
Victron Victron Blue Smart 12/13 IP67 13A charger 12 / 230 Volt
The Blue Smart IP 67 12/13 12V 230V battery charger from Victron Energy (MPN BPC121313006) is a smart, high-performance battery charger of the latest generation with 13A charging current for charging 12V AGM, gel and lead-acid batteries as well as lithium ion batteries. In terms of functionality, the Blue Smart IP67 series is, with the exception of a few functions, identical to the chargers in the Blue Smart IP 65 and IP 22 device families. Only the operating environment for which these chargers are designed differs. Thanks to integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new features become available. Key Features of Blue Smart IP67 12/13 13A Battery Charger Victron Part Number: BPC121313006 Model name: Blue Smart IP 67 12/13 Max. charging current: 13A for battery voltage: 12V DC for mains voltage: 180-265 VAC 45-65 Hz Fully encased: waterproof, shockproof and fire retardant Smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage charging algorithm extends the life of your batteries thanks to integrated storage mode can be used to supply power to 12V consumers high-quality housing made of cast aluminum Protection against application errors: reverse polarity on battery (fuse), protection against overtemperature, protection against output short circuit Fully encased: waterproof, shockproof and fire retardant Water, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are coated with resin. One of the highest charging efficiencies ever! Setting a new industry standard: With an efficiency of at least 92% or more, these chargers produce three to four times less heat. Adaptive 5-stage charging algorithm The Blue Smart charger is characterized by its microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adapted to the type of battery use. "Bulk" (constant current phase) "Absorption" (constant voltage phase) "Recondition" (regeneration phase) "Float" (float voltage phase) "Storage" (storage mode) Storage mode: Less maintenance and aging when the battery is idle Storage mode is activated whenever no discharge has occurred within 24 hours. In storage mode, the float charge voltage is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This creates a type of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Key differences to the Blue Smart IP 65 family The two device groups differ in the following points: the protection class, the IP 67 devices have the best possible protection Blue Smart IP 65 devices have a 7-stage charging algorithm, the IP67 has 5 stages Scope of delivery: 1x Victron BPC121313006 Blue Smart IP67 12/13 13A 12V 230V battery charger 1x User manual 1x 1.5m battery connection cable red/black
€134,00
Victron Victron Lynx Smart BMS 500 battery management system
The Lynx Smart BMS from Victron Energy (MPN LYN034160200) is a dedicated battery management system for Victron lithium smart batteries. It contains a positive and negative busbar, a BMS, a circuit breaker and a battery monitor. The Lynx Smart BMS is part of the modular Lynx Distribution system. Characteristics Built-in 500A circuit breaker for fallback protection Battery monitor that displays the charge level in percent and other data Alarm relay: provides a warning before the system shuts down Status and Bluetooth LED Communication via Bluetooth with VictronConnect app Communication via VE.Can with GX device Incl. Two VE.Can RJ45 terminators Technical data Supply voltage range: 9-58 VDC Supported system voltages: 12, 24 or 48V Reverse polarity protection: yes Main safety protection continuous current: 500A continuous Peak current main safety protection: 600A for 5 minutes Power consumption in active mode: approx. 2.6W (200mA at 13V) Operating temperature range: -40°C - +60°C Protection class: IP22 Dimensions: 190 x 180 x 80 mm Weight: 2kg The Lynx distribution system The Lynx distribution system is a modular busbar system that includes DC connections, distribution, fuse, battery monitoring and/or lithium battery management. The Lynx Distribution System consists of the following parts: Lynx Power In - A 4-terminal positive and negative bus bar for batteries or DC devices Lynx Distributor - A positive and negative bus bar with 4 fused connections for batteries or DC devices together with fuse monitoring Lynx Shunt VE.Can - A positive busbar with space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup in a GX device Lynx Smart BMS - For use with Victron Energy Smart Lithium batteries. It contains a positive busbar with a circuit breaker powered by a battery management system and a negative busbar with a shunt for battery monitoring. It has Bluetooth communication for monitoring and setup via the VictronConnect app and VE.Can communication for monitoring with a GX device and the VRM portal Scope of delivery: 1x Victron Energy Lynx Smart BMS (LYN034160200) 2x RJ45 VE.Can termination resistors 1x User manual
€822,00
Victron Victron Quattro 24/5000/120 24V 230V 4000W sine wave converter 120A battery charger
The Quattro 24/5000/120-100/100 from Victron (MPN QUA245021010) is a device combination of a 24V 4000W sine wave inverter, a powerful battery charger and transfer switch. It has two switchable AC outputs and 2 AC inputs, each equipped with a 100A transfer switch. The Quattro can be connected to two independent AC sources: for example to the public power grid and a generator or to two generators. The Quattro automatically connects to the active source. The integrated battery charger delivers an impressive 120A, which means that even large batteries can be fully charged quickly if shore/mains power is available. The 24V sine wave voltage converter installed in the Quattro converts your battery power into 230V alternating current. Thanks to the real sine wave, the power quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, 1 lightning-fast 100A transfer switch is installed for each alternating current input. Thanks to these switches, countless applications can also be implemented in the grid-connected area. In addition to the VE.Bus port, 2 COM ports are also available for system integration, which enables virtually unlimited networking of the Quattro. Extremely flexible thanks to 2 AC inputs and 2 AC outputs The main output ensures uninterrupted operation. In the event of a power failure or an interruption in shore/generator power, the Quattro takes over the supply of the connected consumers. The switchover is so fast (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when AC power is available at one of the Quattro's inputs. Consumers that must not discharge the battery, such as a water heater, can be connected to this output. Key features of the Quattro 24/5000/120-100/100 4000W continuous power and 8000W peak power, for 24V battery voltage Device combination of inverter with transfer switch and 120A battery charger delivers pure 230V sine voltage and a clean 50Hz frequency 2 AC inputs with integrated transfer switch / 2 x 100 A maximum switchable current 2 AC outputs + 1x additional output which only allows current to pass to the consumer when the AC input is active. VE.Bus communication port provides extensive possibilities for networking, system integration, configuration and control of Victron Multiplus devices. supports three-phase operation (3 identical units of the same model required) Multiplus devices can be connected in parallel, up to 6 devices can be connected in parallel and the system performance can thus be significantly increased if necessary 2x COM ports are available in addition to the VE.Bus port, meaning there are virtually no limits to system integration PowerControl function enables working with limited generator power as well as limited shore or mains power PowerAssist function enables “performance increase” of generators and shore connection support when required Can be used as a UPS solution for uninterruptible power supply, thanks to the integrated transfer switch with 16A or 50A Can be used for grid-connected self-consumption systems that only draw power from the grid operator when the battery capacity is no longer sufficient or other programmable events have occurred 3 separately programmable relays Compatible with numerous Victron control and display panels very high efficiency and low self-consumption massive performance expansion possible Up to 6 Quattros can be connected in parallel. For example, with six 48/10000/140 units this results in 54 kW/60 kVA power or 840 A charging current. Three units can be connected in a three-phase configuration. But that's not all: up to 6 sets with three devices can be connected in parallel, giving 162 kW/180 kVA inverter power and over 2,500 A charging capacity. PowerControl – Working with limited generator power, limited shore or mains power The MultiPlus is a very powerful battery charger. It therefore draws a lot of power from the generator or shore power supply (almost 10A per 5kVA Multi at 230 VAC). The Multi Control remote control panel can be used to set the maximum mains or generator current to be drawn. The MultiPlus then takes other connected AC consumers into account and only uses the power that is "left over" for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist – “performance enhancement” of generators and shore connection support This function gives the PowerControl principle a new dimension. It enables the Quattro to support alternative sources that are too weak. Load peaks often only occur for a limited period of time. In such a case, the Quattro ensures that insufficient shore power or generator power is immediately compensated for by energy from the battery. BackUp system: alternating current even in the event of a power failure The Quattro can be used in both off-grid and grid-connected PV systems as well as other alternative energy systems. Software is available to detect a grid failure. simple system configuration If settings need to be changed on a single device, this can be done within a few minutes using a DIP switch setting procedure. Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software. On-site monitoring options and control Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, Smartphone or Tablet (Bluetooth Smart), Laptop or Computer (USB or RS232). Remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and monitoring of the MultiPlus. In addition, system data can be stored and viewed free of charge on the VRM (Victron Remote Management) website. Remote configuration If systems with a Color Control Panel are connected to the Ethernet, they can be accessed and settings can be changed remotely. Scope of delivery: 1x Victron QUA245021010 Quattro 24/5000/120-100/100 device combination consisting of 24V 4000W sine wave converter + 24V 120A battery charger + 2 AC inputs with integrated 100A transfer switches 1x User manual
€2.272,00
Victron Victron MultiPlus 12/3000/120-16 12V 230V 2400W 6000W inverter 120A charger
The Multiplus 12/3000/120-16 from Victron Energy (MPN: PMP123020001) is a device combination of a 12V 2400W sine wave inverter and a battery charger. The integrated battery charger delivers an impressive 120A, which means that even large batteries can be fully charged quickly if shore/mains power is available. The 12V sine wave voltage converter built into the Multiplus converts your power from the battery into 230V alternating current. Thanks to the real sine wave, the power quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, a lightning-fast transfer switch is also installed, which can be used to implement numerous grid-connected solutions. In addition to the VE.Bus port, a COM port is also available for system integration, which enables virtually limitless networking of the Multiplus. Comprehensive and flexible This inverter combines a charger, inverter and a fast transfer switch, perfect for RVs, boats, yachts and grid connection. It ensures uninterrupted power supply in the event of grid fluctuations or outages. Also ideal for self-consumption systems that only access grid power when battery power is low, or as a UPS solution that ensures uninterrupted power flow when the grid fails. About the Multiplus 12/3000/120-16 Powerful: 2400W continuous power, 6000W peak power at 12V battery voltage All-in-one device: inverter with transfer switch, 120A battery charger Reliable power supply: Pure 230V sine wave voltage, 50Hz frequency Networkability: VE.Bus communication port enables comprehensive networking, configuration and control Scalability: Parallel connection of up to 6 devices possible for higher performance Flexibility: 2 AC outputs, COM port from Multiplus 3000 for extended system integration Functions: PowerControl, PowerAssist for optimized power usage Versatility: Can be used as UPS, suitable for grid-connected self-consumption systems Compatibility: Supports various Victron control and display panels Three-phase operation possible with identical MultiPlus inverters Massive performance expansion possible Apart from the parallel connection, three units of the same model can also be configured for a three-phase output. But that's not all: up to six sets of three units can be connected in parallel to achieve a huge 75 kW / 90 kVA inverter and over 2,000 A charging capacity (calculated with the 5000 version) PowerControl Working with limited generator power, limited shore or mains power The MultiPlus is a very powerful battery charger. It therefore draws a lot of power from the generator or shore power supply (almost 10A per 5kVA Multi at 230 VAC). The maximum mains or generator current to be drawn can be set using the Multi Control remote control panel. The MultiPlus then takes other connected AC consumers into account and only uses the power that is "left over" for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist “Performance increase” of generators and shore connection support This function gives the PowerControl principle a new dimension. It enables the MultiPlus to support alternative sources that are too weak. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated for by energy from the battery. BackUp system: alternating current even in the event of a power failure The Multiplus can be used with both off-grid and grid-connected PV systems as well as other alternative energy systems. Software is available to detect a grid failure. Easy system configuration If settings need to be changed on a single device, this can be done within a few minutes using a DIP switch setting procedure. Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software. On-site monitoring options and control Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, Smartphone or Tablet (Bluetooth Smart), Laptop or Computer (USB or RS232). Remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and monitoring of the MultiPlus. In addition, system data can be stored and viewed free of charge on the VRM (Victron Remote Management) website. Remote configuration If systems with a Color Control Panel are connected to the Ethernet, they can be accessed and settings can be changed remotely. Technical data: Input voltage range: 9.5-17V, 19-33V, 38-66V Output voltage: 230VAC±2% - 50Hz ± 0.1% Peak power: 6000W Continuous power: 2400W Battery connection: Four M8 bolts (2 plus and 2 minus connections) 230VAC connection: screw terminals 13mm² (6 AWG) Max. efficiency: 95% Protection class: IP21 Dimensions: 362 x 258 x 218mm Weight: 18kg Scope of delivery: 1x Victron PMP123020001 Multiplus 12/3000/120-16 device combination 1x User manual
€1.193,00
Victron Victron MultiPlus 12/2000/80-32 230V VE.Bus 2000W 3500W inverter 80A charger
The Multiplus 12/2000/80-32 from Victron (MPN PMP122200000) is a device combination of a 12V 2000W sine wave inverter and battery charger. The permanently integrated battery charger delivers an impressive 80A, which means that even large batteries can be fully charged quickly if shore/mains power is available. The 12V sine wave voltage converter built into the Multiplus converts your power from the battery into 230V alternating current. Thanks to the real sine wave, the power quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, a lightning-fast 32A transfer switch is also installed, which can also be used to implement numerous grid-connected solutions. For system integration, the MultiPlus has a VE.Bus port, which enables virtually limitless networking. Comprehensive and flexible As it has an inverter and charger as well as a lightning-fast 32A transfer switch, it is an ideal inverter for mobile homes, boats or yachts and for grid-connected areas of uninterruptible power supply in the event of power fluctuations or power outages. It can also be used in grid-connected self-consumption systems that only draw power from the supplier when the battery power is no longer sufficient or as a UPS solution in which the Multiplus steps in when the power from the grid operator suddenly fails, thus ensuring an uninterruptible power supply. Key features of the Multiplus 12/2000/80-32 1600W continuous power and 3500W peak power, for 12V battery voltage Device combination of inverter with transfer switch and 80A battery charger delivers pure 230V sine voltage and a clean 50Hz frequency VE.Bus communication port provides extensive networking, system integration, configuration and control options for Victron Multiplus devices supports three-phase operation (3 identical units of the same model required) Multiplus devices can be connected in parallel, up to 6 devices can be connected in parallel and the system performance can thus be significantly increased if necessary PowerControl function enables working with limited generator power as well as limited shore or mains power PowerAssist function enables “performance increase” of generators and shore connection support when required Can be used as a UPS solution for uninterruptible power supply, thanks to the integrated transfer switch Can be used for grid-connected self-consumption systems that only draw power from the grid operator when the battery capacity is no longer sufficient or other programmable events have occurred Compatible with numerous Victron control and display panels Massive performance expansion possible Apart from parallel connection, three units of the same model can also be configured for a three-phase output. But that's not all: up to six sets of three units can be connected in parallel to achieve a huge charging capacity PowerControl – Working with limited generator power, limited shore or mains power The MultiPlus is a very powerful battery charger. It therefore draws a lot of power from the generator or shore power supply. The Multi Control remote control panel can be used to set the maximum mains or generator current that can be drawn. The MultiPlus then takes other connected AC consumers into account and only uses the power that is "left over" for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist – “performance enhancement” of generators and shore connection support This function gives the PowerControl principle a new dimension. It enables the MultiPlus to support alternative sources that are too weak. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated for by energy from the battery. BackUp system: alternating current even in the event of a power failure The Multiplus can be used with both off-grid and grid-connected PV systems as well as other alternative energy systems. Software is available to detect a grid failure. Easy system configuration If settings need to be changed on a single device, this can be done within a few minutes using a DIP switch setting procedure. Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software. On-site monitoring options and control Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, Smartphone or Tablet (Bluetooth Smart), Laptop or Computer (USB or RS232). Remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and monitoring of the MultiPlus. In addition, system data can be stored and viewed free of charge on the VRM (Victron Remote Management) website. Remote configuration If systems with a Color Control Panel are connected to the Ethernet, they can be accessed and settings can be changed remotely. Scope of delivery: 1x Victron PMP122200000 Multiplus 12/2000/80-32 device combination consisting of 12V 2000W sine wave converter + 12V 80A battery charger + 32A transfer switch 1x User manual
€927,00
Victron Victron SmartSolar MPPT 150/70-Tr
The Smartsolar MPPT 150/70-tr from Victron Energy (MPN SCC115070210) belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer and processes a whopping 70A of solar power and can work flexibly with 12/24/36/48 V batteries. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new class of device. The SmartSolar 150/70-tr is also available as a version with MC4 connections on the solar side of the charge controller instead of screw terminals. This model can also be operated in parallel with other controllers of the same type. In comparison to the BlueSolar series, the Bluetooth module in the Smartsolar family is already integrated into the controller, which makes the Smart Dongle superfluous with this device. Also new is the optionally available LCD display, which can simply be plugged onto the SmartSolar 150/70-tr when required. The display then provides all the important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar charge controller . It safely covers the cable inputs and the connection terminals of the controller, thus protecting them from external influences and contact. Key product features of the SmartSolar 150/70-tr 70A 12V 24V 36V 48V MPPT Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies Nominal charging current 70A, 150V maximum PV open circuit voltage maximum PV power: 12 V 1000 W / 24 V 2000 W / 48 V 4000 W Victron Energy Part Number (MPN): SCC115070210 Automatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllers with optional LCD display Built-in Bluetooth module for app-based analysis and configuration of the controller (via free Victron app on compatible devices) optional LCD display available Integrated VE.Direct data communication port for connection to additional devices such as the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/70-tr controllers possible adjustable constant charging voltage adjustable trickle charge voltage suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries Fully programmable charging algorithms that can later be manually activated and switched via a switch on the housing integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm Remote controlled switching on and off possible via 2-pin plug Protection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor balances maintenance and constant charge voltage according to temperature Day/night time control and light dimming option Smart data communication via VE.Direct and lightning-fast Bluetooth Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the MPPT 150/70-tr SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the maximum power point in case of partial shading In case of partial shading, there may be two or more maximum power points ( MPP ) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP . However, this may not be the optimal MPP . The innovative algorithm of the SmartSolar 150/70-tr will always maximize the energy yield by adjusting to the optimal MPP . High-speed MPP tracker of the latest generation Especially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Comprehensive electronic protection Protection against reversed battery connection PV backflow preventer Protection against overheating of the device Protection against short circuits Protection against reversed PV connection The VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are linked to the charge controller and thus offers the possibility of communication with additional devices Systempanel GX Color Control. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand shop. Scope of delivery 1x Victron SCC115070210 SmartSolar MPPT 150/70-tr 12V 24V 36V 48V 70A charge controller User manual
€347,00
Victron Victron SmartSolar MPPT 250/70-Tr
The Smartsolar MPPT 250/70-tr from Victron Energy (MPN SCC125070210) is part of the latest generation of smart solar controllers from the Dutch premium manufacturer. The controller processes a whopping 70A of solar power and can work flexibly with 12/24/36/48 V batteries with a maximum PV input voltage of 250V DC. The ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new device class. This model can also operate in parallel with other controllers of the same type. Compared to the Smartsolar 150/..... series, the 250/.... series can handle a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar controller family was able to increase efficiency by a further 1 percent to a total of 99%, thereby setting new standards across the industry. This value is currently the best of all solar charge controllers that we know of. Compared to the BlueSolar family, the Bluetooth module is already permanently integrated into the controller in the 250 Smartsolar series, which makes the Smart Dongle superfluous on this device if you want to analyze and configure the controller via Bluetooth using a smartphone or tablet. Also new is the optionally available LCD display, which can be easily plugged onto the SmartSolar 250/70-tr when required. The display then provides all the important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar charge controller . It safely covers the cable entries or the connection terminals of the controller and thus protects them from external influences and contact. Key product features of the SmartSolar 250/70-tr 70A 12V 24V 48V MPPT Victron Energy Part Number: SCC125070210 max. PV power: 12 V 1000 W / 24 V 2000 W / 48 V 4000 W Max. rated charging current 70A, 250V maximum PV open circuit voltage Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies Automatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllers with optional LCD display Built-in Bluetooth module for app-based analysis and configuration of the controller (via free Victron app on compatible devices) optional LCD display available Integrated VE.Direct data communication port for connection to additional devices such as the GX Color Control Panel or a Smart BMV battery monitor groundbreaking efficiency 99% Parallel operation with other 250/85 controllers possible adjustable constant charging voltage adjustable trickle charge voltage suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries Fully programmable charging algorithms that can later be manually activated and switched via a switch on the housing integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm Remote controlled switching on and off possible via 2-pin plug Protection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor balances maintenance and constant charge voltage according to temperature Day/night time control and light dimming options Smart configuration and analysis via Victron Connect app Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the maximum power point in case of partial shading In case of partial shading, there may be two or more maximum power points ( MPP ) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP . However, this may not be the optimal MPP . The innovative algorithm of the SmartSolar controller will always maximize energy yield by adjusting to the optimal MPP . High-speed MPP tracker of the latest generation Especially under overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Optional LCD display available for retrofitting If you prefer to operate and configure the Smartsolar MPPT 250/70-tr directly, you can retrofit the Smartsolar Control SCC900600010 display. The display enables easy configuration of the controller via key input and also provides all important performance data at a glance. Comprehensive electronic protection Protection against reversed battery connection PV backflow preventer Protection against overheating of the device Protection against short circuits Protection against reversed PV connection The VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are linked to the charge controller , thus offering the possibility of communication with additional devices such as the GX Color Control system panel. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand shop. Scope of delivery 1x Victron SCC125070210 SmartSolar MPPT 250/70-tr 12V 24V 48V 70A charge controller 1x User manual
€434,00
Victron Victron MultiPlus 12/1200/50-16 230V VE.Bus
The new MultiPlus 12/1200/50-16 (Victron Energy, PMP122120000) is the successor to the Multiplus Compact 12/1200. This device is a modern device combination consisting of a powerful pure sine wave inverter, an advanced 50A battery charger that uses adaptive charging technology and a 16A high-speed AC transfer switch. In the event of a power failure or if the shore power or on-board generator is interrupted, the Multi's inverter is automatically switched on and takes over the supply of power to the connected consumers. The switchover takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. Main features of the MultiPlus 12/1200/50-16 Continuous output power at 25°C: 1200W Victron Energy MPN: PMP122120000 for 12V system voltage integrated 50A mains charger for your batteries integrated 16A mains transfer switch UPS operation possible Extensive accessories available Can be used in numerous applications, whether on land or mobile Proven reliability The complete bridging with a ring transformer topology has proven itself for years. The inverter is short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). PowerControl – (Multiplus 800VA 1200VA only). The Multi Control remote control panel can be used to set the maximum mains or generator current that can be drawn. The MultiPlus then takes other connected AC consumers into account and only uses the power that is "left over" for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist – (Multiplus 800VA 1200VA only) Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated for by energy from the battery. If the load is reduced, ie consumers are switched off, the energy that is then available again can be used to charge the batteries. High inrush power This is required to switch on loads with high inrush currents such as voltage converters for LED lamps, halogen lamps or power tools. Search mode When search mode is set to 'on', the inverter's power consumption is reduced by approximately 70% in no-load operation. In this mode, when the Multi is operating in inverter mode, it switches off at no load or at low load and switches back on for a short period every two seconds. If the output current exceeds a set limit, the inverter resumes operation. If this is not the case, the inverter switches off again. Programmable relay In the basic setting, the multifunction relay acts as an alarm relay, i.e. it switches the device off in the event of a fault (device gets too hot, hum voltage at the input is too high, battery voltage is too low). Scope of delivery: Victron Energy PMP122120000, MultiPlus 12/1200/50-16
€617,00
Victron Victron Phoenix Inverter 12/3000 230V Smart
The Phoenix 12/3000 Smart Inverter from Victron Energy (MPN PIN122300000) is an advanced inverter based on the proven Phoenix series. It offers a continuous output of 3000W and is designed for 12V battery voltage. Compared to the previous models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration. The Phoenix 12/3000 Smart is further characterized by its high switch-on power and reliability and, thanks to the integrated ECO mode, is also in the top league of this device class in terms of self-consumption and efficiency. Features Phoenix 12/3000 Smart for 12V battery voltage, output voltage range 210C – 245V Output power (non-linear): 3000W, 2400W linear continuous load at 25 degrees ambient temperature 6000W peak power handling high starting currents integrated Bluetooth module and VE.Direct port for wireless monitoring and system integration designed for high inrush currents integrated alarm relay, ECO mode Monitoring of input and output voltage, load and alarms etc. via Bluetooth or VE.Direct integrated, two-pin plug for connecting an on/off switch (remote control) Parameters configurable via Bluetooth or VE.Direct Low battery alarm Thresholds for shutdown and restart at low battery voltage levels Dynamic shutdown: load-dependent shutdown threshold Output voltage: 210 - 245V, frequency: 50 Hz or 60 Hz Threshold for ECO mode on/off and ECO mode sensor Alarm relay High reliability thanks to ring transformer topology Complete bridging with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). Very high switch-on power This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Eco mode In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset threshold, the inverter remains switched on. Remote controlled on/off switch A remote-controlled on/off switch or a relay contact can be connected to the two-pin plug. Alternatively, connection H (left) of the two-pin plug can be connected to a battery positive terminal or connection L (right) of the two-pin plug can be connected to the battery negative terminal (or, for example, to the body of a vehicle). Scope of delivery: 1x Victron PIN122300000 Phoenix Smart 12/3000 1x User manual
€782,00
Victron Victron Wallbox EV charging station-NS up to 22kW 1- and 3-phase electric car
The EV Charging Station NS 22 kW (MPN: EVC200300200) from Victron Energy is a powerful electric vehicle charging station that you can operate in both 3-phase and 1-phase. It delivers an impressive 22 kW AC power in 3-phase operation, while a solid 7.3 kW is still available in 1-phase mode. Although technically identical to the EV Charging Station, the new version features a modern design that is available in 3 different colors. Setup, configuration and monitoring are conveniently done from VictronConnect via Bluetooth and/or the integrated web interface, which can be accessed via a WiFi access point or WiFi LAN. Furthermore, a GX device can be integrated, allowing you to control it remotely. What is particularly noteworthy is that excess solar energy is used directly to charge your vehicle. Manual and timed modes offer additional flexibility to meet the needs of the electric vehicle, the energy supply system and your general electromobility. About the EV Charging Station NS Powerful e-vehicle charging station WLAN communication 1- or 3-phase operation Easy operation and control Via Bluetooth and VictronConnect app Illuminated ring for status display 3 operating modes available Optionally available colored fronts: Black White Operation, control and display A single glance in the VictronConnect app or via Bluetooth gives you full control and overview of all operating parameters and statistics. Furthermore, a Cerbo-GX communication center can optionally be used for remote monitoring. The charging station is equipped with a fully programmable RGB light ring around the charging port, which makes it possible to see the status of the device at a glance. Using the integrated web interface, this light ring can be individually configured to display different light effects depending on the current status (disconnected, charged, in operation, etc.). Operating modes Manual mode for configuring the output current: In manual mode, it is possible to flexibly configure the output current in the range of 6 to 32 A. The charging power can be controlled in various ways. Either via the web interface, from a GX device and the VRM remote monitoring or via VictronConnect. In this way, it is easy to initiate or stop the charging process manually as soon as a vehicle is connected to the charging station. Optional GX device for VRM remote monitoring: Victron GX Touch 50 display panel for Cerbo GX Victron GX Touch 70 display panel for Cerbo GX Automatic mode to ensure maximum efficiency of the PV system: The charging station automatically detects when excess energy is available and uses only that to charge the vehicle. Instead of the energy loss that would occur if excess energy was lost, it is instead stored in the vehicle's battery. Timed mode to charge the vehicle at specific times: Thanks to a fully programmable timer, the vehicle can be charged at different times. For example, during the night when grid costs are lower. Technical data Input voltage range: 170-265V AC Nominal charging current: 32A / phase Rated power: 22 kW Current output range: 6-32 A Own consumption: 15 mA at 230 V Operating temperature range: -25°C - +50°C Storage temperature range: -40°C - +80°C Protection class: IP44 Weight: 3kg Dimensions: 372 x 292 x 122mm Data communication: Modbus TCP via WLAN, Bluetooth Scope of delivery: 1x Victron Energy EV Charging Station NS 22 kW
€607,00
You have seen 192 out of 319 products