Solar technology
From a small socket to a home battery: this overview brings together the photovoltaic range of Energie24.Shop. It is a good starting point if you want to get an overview.
-
Victron Victron Blue Smart IP22 12/15(3) Charger 12V 15A 3 batteries
- 5-year manufacturer warranty
The Blue Smart IP22 12/15(3) charger from Victron Energy (MPN BPC121544002) is a professional, compact 12V 15A battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart IP22 12/15(3) charger can be used with equipment in your workshop or with vehicles such as (classic) cars, motorcycles, boats and motorhomes, and it charges both classic 12V lead-acid batteries and modern lithium batteries. It offers Highlights of the 12/15(3) Blue Smart IP22 Charger Intelligent charging, up to the perfect battery condition... The seven-stage charging algorithm gets the best out of your battery. The charger supplies the battery with the energy it needs, keeps it in a healthy condition, ensures better performance... and a longer life. Recovery of deeply discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart IP22 charger will try to recharge a deeply discharged battery by forcing a weak charging current into it. Normal charging then resumes as soon as sufficient voltage is present across the battery terminals. Check the battery status remotely with the VictronConnect app The Blue Smart IP22 12/15(3) charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured with the VictronConnect app. The most important technical features of the 12/15(3) Blue Smart IP22 Charger Victron part number: BPC121544002 charges 12V lead-acid, gel, AGM and lithium batteries 15A maximum charging current 3 battery charging outputs very compact dimensions: 235 x 108 x 65mm state-of-the-art, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app Other performance features of the 12/15(3) Blue Smart IP22 Battery Charger Pioneering efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat than the industry standard. In addition, once the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 7-stage charging algorithm The 12/15(3) Blue Smart charger features microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adjusted to the way the battery is used. Storage mode: less maintenance and ageing while the battery is at rest Storage mode is activated whenever no discharge has taken place within 24 hours. The float voltage is then reduced to 2.2V/cell (13.2V for a 12V battery) to minimise gassing and thereby prevent corrosion of the positive plates. Once a week, the voltage is raised to the gassing voltage level. This achieves a kind of equalisation charge that prevents electrolyte stratification and sulphation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC121544002 12/15(3) IP22 Blue Smart Charger 1x Operating manual
-
Victron Victron AGM 12V 170Ah Super Cycle Battery C20
- 2.04 kWh
- 2-year manufacturer warranty
The 12V 170Ah Super Cycle battery from Victron Energy (MPN BAT412117081) is based on the latest findings in battery electrochemistry and therefore offers significantly more cycles and high resistance to deep discharge. The use of a Super Cycle battery is recommended if an occasional 100% discharge (deep discharge) or more frequent discharge down to 60-80% is to be expected. Truly innovative: the Victron AGM 12V 170Ah Victron's AGM Super Cycle batteries contain the latest innovations from current developments in battery electrochemistry. The paste on the positive plates does not soften as quickly, even if the battery has been discharged by 100% several times. In addition, the battery chemistry has been supplemented with a few additives that significantly reduce sulfation in the event of deep discharge. Bottom line: thanks to these technical innovations, the Ultra Deep Cycle batteries achieve significantly more cycles and therefore reach a greater age. Features of the Victron 12V 170Ah Super Deep Cycle AGM battery Victron part number: BAT412117081 Nominal battery voltage: 12V Battery capacity: 170Ah powerful, even after three hundred 100% deep discharges Service life at 20°C 7-12 years Cycles at 20°C and 40% discharge: 1000 Cycles at 20°C and 60% discharge: 700 Cycles at 20°C and 80% discharge: 500 Cycles at 20°C and 100% discharge: 300 low internal resistance smaller and lighter than conventional deep-cycle batteries very good tolerance of high-current discharge Weight: 45 kg, dimensions (WxLxH): 17.2 x 33.6 x 28 cm Exceptional performance with repeated deep discharge Tests have shown that the Super Cycle battery still performs even after at least three hundred 100% deep discharges. In the test, the batteries were discharged daily down to 10.8 V with I = 0.2 C20. They were then left in the discharged state for two hours and then recharged with I = 0.2 C20. Most batteries are damaged if they are left in the discharged state for two hours 100 times, but not the Victron 12V 170Ah Super Cycle battery. Super Cycle batteries: smaller and lighter Another advantage of the new chemical composition is that the batteries are smaller and weigh less than our previous deep-cycle AGM batteries. Typical areas of application of the Applications with high-current discharge, for example solar systems with an inverter on the solar battery Applications where complete deep discharge may occasionally occur or more frequent discharge down to 60-80% is to be expected perfectly suited as a starter battery Traction battery Bow thrusters, winches, etc. Low self-discharge Thanks to the processing of high-purity materials and lead-calcium grids in the Super Cycle AGM 12V 170Ah, the self-discharge of this battery is particularly low. This prevents the battery from self-discharging too quickly over longer periods without charging. Scope of delivery: 1x Victron Energy BAT412117081 AGM 12V 170Ah Super Cycle battery
480,00 €
incl. VAT
-
Victron Victron Blue Smart 12/13 IP67 13A Charger 12 / 230 Volt
- 5-year manufacturer warranty
The Blue Smart IP 67 12/13 12V 230V battery charger from Victron Energy (MPN BPC121313006) is a smart, high-performance battery charger of the latest generation with 13A charging current for charging 12V AGM, gel and lead-acid batteries as well as lithium-ion batteries. In terms of functionality, the Blue Smart IP67 series is identical, apart from a few functions, to the chargers of the Blue Smart IP 65 and IP 22 device families. Only the operating environment for which these chargers are designed differs.Thanks to integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new functions become available.Key features of the Blue Smart IP67 12/13 13A battery charger Victron part number: BPC121313006 Model designation: Blue Smart IP 67 12/13 max. charging current: 13A for battery voltage: 12V DC for mains voltage: 180-265 VAC 45-65 Hz fully encapsulated: waterproof, shockproof and fire-retardant smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage charging algorithm extends the life of your batteries thanks to integrated storage mode can be used to power 12V loads high-quality die-cast aluminum housing Protection against application errors: reverse polarity at the battery (fuse), overtemperature protection, output short-circuit protection Fully encapsulated: waterproof, shockproof and fire-retardantWater, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of die-cast aluminum and the electronics are coated with resin.One of the highest charging efficiencies ever!Setting a new industry standard: With an efficiency of at least 92% or more, these chargers produce three to four times less heat.Adaptive 5-stage charging algorithmThe Blue Smart charger is distinguished by its microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the way the battery is used. "Bulk" (constant-current phase) "Absorption" (constant-voltage phase) "Recondition" (regeneration phase) "Float" (float voltage phase) "Storage" (storage mode) Storage mode: Less maintenance and aging when the battery is at restStorage mode is activated whenever no discharge has occurred within 24 hours. In storage mode, the float voltage is then lowered to 2.2 V/cell (13.2 V for a 24 V battery) in order to minimize gas formation and corrosion of the positive plates. Once a week, the voltage is raised to the gassing voltage level. This achieves a kind of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Key differences from the Blue Smart IP 65 familyThe two device groups differ in the following respects: the protection rating; the IP 67 devices offer the best possible protection Blue Smart IP 65 devices have a 7-stage charging algorithm , whereas the IP67 has 5 stages Scope of delivery:1x Victron BPC121313006 Blue Smart IP67 12/13 13A 12V 230V battery charger1x user manual1x 1.5m battery connection cable red/black
-
Victron Victron Lynx Smart BMS 500 battery management system
- 5-year manufacturer warranty
The Lynx Smart BMS from Victron Energy (MPN LYN034160200) is a special battery management system for Victron lithium smart batteries. It contains a positive and a negative busbar, a BMS, a circuit breaker and a battery monitor. The Lynx Smart BMS is part of the modular Lynx Distribution system. Features Built-in 500A circuit breaker, for fallback protection Battery monitor that displays the state of charge as a percentage and other data Alarm relay: provides a warning before the system shuts down Status and Bluetooth LED Communication via Bluetooth with the VictronConnect app Communication via VE.Can with a GX device Incl. two VE.Can RJ45 terminators Technical specifications Supply voltage range: 9-58 VDC Supported system voltages: 12, 24 or 48V Reverse polarity protection: yes Main fuse protection continuous current: 500A continuous Main fuse protection peak current: 600A for 5 minutes Power consumption in active mode: approx. 2.6W (200mA at 13V) Operating temperature range: -40°C - +60°C Protection rating: IP22 Dimensions: 190 x 180 x 80 mm Weight: 2 kg The Lynx distribution system The Lynx distribution system is a modular busbar system that includes DC connections, distribution, fusing, battery monitoring and/or lithium battery management.The Lynx Distribution System consists of the following parts: Lynx Power In - A positive and negative busbar with 4 connections for batteries or DC devices Lynx Distributor - A positive and negative busbar with 4 fused connections for batteries or DC devices, together with fuse monitoring Lynx Shunt VE.Can - A positive busbar with space for a main system fuse and a negative busbar with a shunt for battery monitoring. It features VE.Can communication for monitoring and setup in a GX device Lynx Smart BMS - For use with Victron Energy Smart lithium batteries. It contains a positive busbar with a circuit breaker, driven by a battery management system, and a negative busbar with a shunt for battery monitoring. It features Bluetooth communication for monitoring and setup via the VictronConnect app, and VE.Can communication for monitoring with a GX device and the VRM portal Scope of delivery: 1x Victron Energy Lynx Smart BMS (LYN034160200)2x RJ45 VE.Can terminators1x Operating manual
-
Victron Victron Quattro 24/5000/120 24V 230V 4000W Sine Wave Inverter 120A Battery Charger
- 4 kW
- 5-year manufacturer warranty
The Victron Quattro 24/5000/120-100/100 combines a 24-V sine-wave inverter, a 120 A battery charger and two AC inputs with an integrated transfer switch. It can be connected to two independent sources, such as the public grid and a generator, and switches automatically to the active source. Highlights Two AC inputs: Up to 100 A passed through per input (2 x 100 A). Two AC outputs: The main output switches over in less than 20 milliseconds; the second output only supplies power when AC input is present, suitable for loads such as water heaters. PowerControl and PowerAssist: Adjustable current limit per input; load peaks are supplemented from the battery. Scalable: Up to 6 devices in parallel; three identical devices as a three-phase system. Interfaces: VE.Bus port, two communication ports and three programmable relays. Technical specifications Designation Value Battery voltage 24 V (input range 19–33 V) Continuous power at 25 °C 5000 VA / 4000 W Continuous power at 40 °C 3700 W Continuous power at 65 °C 3000 W Peak power 10000 W House battery charging current 120 A Pass-through current 2 x 100 A Auxiliary output 50 A Max. efficiency 94 % No-load consumption 30 W Weight / protection rating 30 kg / IP20 Scope of delivery 1× Victron Quattro 24/5000/120-100/100 (device combination of a 24-V sine-wave inverter, battery charger and two AC inputs with transfer switches) 1× user manual Who is it for? For systems with grid and generator, ships, off-grid systems and backup solutions that need two AC sources and high charging power. Good to know The Quattro is lithium-compatible. The 24-V battery and the wiring should be designed for currents of this magnitude; configuration and installation should be left to a qualified electrician. We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by email at kontakt@energie24.shop.
-
Victron Victron MultiPlus 12/3000/120-16 12V 230V 2400W 6000W inverter 120A charger
- 2.4 kW
- 5-year manufacturer warranty
The Multiplus 12/3000/120-16 from Victron Energy (MPN: PMP122300001) is a combination unit consisting of a 12V 2400W sine-wave inverter and a battery charger. The permanently integrated battery charger delivers an impressive 120A, so even large batteries can be fully charged quickly when shore or grid power is available. The 12V sine-wave inverter built into the Multiplus converts the power from your battery into 230V alternating current. Thanks to the true sine wave, the power quality is perfectly suited even for sensitive electronic devices. In addition to the two integrated device types, a lightning-fast transfer switch is also built in, which allows numerous grid-connected solutions to be implemented. For system integration, a COM port is available in addition to the VE.Bus port, which makes virtually limitless networking of the Multiplus possible. Comprehensive and flexible in use This inverter combines a charger, an inverter and a fast transfer switch, making it perfect for motorhomes, boats, yachts and grid connection. It provides an uninterrupted power supply during grid fluctuations or outages. It is also ideal for self-consumption systems that only draw grid power when battery power is low, or as a UPS solution that ensures an uninterrupted flow of power if the grid fails. About the Multiplus 12/3000/120-16 Powerful: 2400W continuous power, 6000W peak power at 12V battery voltage All-in-one unit: Inverter with transfer switch, 120A battery charger Reliable power supply: Pure 230V sine-wave voltage, 50Hz frequency Networking: VE.Bus communication port enables comprehensive networking, configuration and control Scalability: Up to 6 units can be connected in parallel for higher power Flexibility: 2 AC outputs, COM port from Multiplus 3000 for extended system integration Functions: PowerControl, PowerAssist for optimised power use Versatility: Can be used as a UPS, suitable for grid-connected self-consumption systems Compatibility: Supports various Victron control and display panels Three-phase operation is possible with identical MultiPlus inverters Massive power expansion possible Besides parallel connection, three units of the same model can also be configured for a three-phase output. But that is not all: up to six sets of three units can be connected in parallel to achieve a huge 75 kW / 90 kVA inverter and over 2,000 A of charging capacity (calculated with the 5000 version) PowerControl Working with limited generator power, restricted shore or grid power The MultiPlus is a very powerful battery charger. It therefore draws a lot of current from the generator or the shore power supply (almost 10A per 5kVA Multi at 230 VAC). With the Multi Control remote panel, the maximum grid or generator current to be drawn can be set. The MultiPlus then takes other connected AC loads into account and uses only the power that is still "left over" for charging. This prevents the generator or the shore power connection from being overloaded. PowerAssist "Power boost" for generators and shore power support This function gives the PowerControl principle a new dimension. It allows the MultiPlus to support alternative sources that are undersized. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that weak shore power or generator output is immediately compensated by energy from the battery. Backup system: AC power even during a grid outage The Multiplus can be used in both off-grid and grid-connected PV systems as well as in other alternative energy systems. Software for detecting a grid outage is available. Simple system configuration If settings on a single unit need to be changed, this can be done within a few minutes using a DIP-switch setting procedure.Parallel and three-phase systems can be configured with the VE.Bus Quick Configure and VE.Bus System Configurator software. Monitoring options and local control Several options are available: battery monitor, Multi Control panel, VE.Net Blue Power panel, Color Control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel allow remote maintenance and remote monitoring of the MultiPlus. In addition, system data can be stored and viewed free of charge on the VRM (Victron Remote Management) website. Remote configuration If systems with a Color Control panel are connected to Ethernet, they can be accessed and settings can be changed remotely. Technical specifications: Input voltage range: 9.5-17V, 19-33V, 38-66V Output voltage: 230VAC±2% - 50Hz ± 0.1% Peak power: 6000W Continuous power: 2400W Battery connection: Four M8 bolts (2 positive and 2 negative terminals) 230VAC connection: Screw terminals 13mm² (6 AWG) Max. efficiency: 93% Protection class: IP20 Dimensions: 362 x 258 x 218 mm Weight: 18kg Scope of delivery: 1x Victron PMP122300001 Multiplus 12/3000/120-16 combination unit 1x User manual
-
Victron Victron MultiPlus 12/2000/80-32 230V VE.Bus 1600W inverter 80A charger
- 1.6 kW
- 5-year manufacturer warranty
The Victron MultiPlus 12/2000/80 combines a 12-V sine-wave inverter with 2000 VA continuous power, an 80-A charger and a transfer switch. The unit supplies AC loads even during a grid outage and supports weak shore-power or generator sources. Highlights High reserve: Peak power of 4000 W for loads with high starting currents. Powerful charger: 80 A charge current for the house battery, plus 4 A for a starter battery. PowerControl and PowerAssist: Adjusts the charge current to the available source and supplements load peaks from the battery. Expandable: Up to 6 units in parallel; three identical units form a three-phase system. Monitoring: Via Bluetooth (VE.Bus Smart Dongle), Multi Control Panel, GX device and the VRM portal. Technical specifications Designation Value Battery voltage 12 V (input range 9.5–17 V) Continuous power at 25 °C 2000 VA / 1600 W Continuous power at 40 °C 1400 W Continuous power at 65 °C 1000 W Peak power 4000 W Charge current, house battery 80 A Max. efficiency 93 % No-load power consumption 9 W Output 230 VAC, 50 Hz Dimensions (H x W x D) 520 x 255 x 125 mm Weight / protection rating 12 kg / IP20 Scope of delivery 1× Victron MultiPlus 12/2000/80 (combination unit consisting of a 12-V sine-wave inverter, battery charger and transfer switch) 1× User manual Who is it for? For motorhomes, yachts, workshop vehicles and off-grid systems with a 12-V battery that need a powerful inverter with grid priority. Good to know The data sheet specifies a transfer switch of 30 A for the 12/2000 model; the model name states 32. Please have us confirm the fuse sizing before you buy. We would be happy to give you personal advice on selection and use: by phone at +49 931 760 260 40 or by e-mail at kontakt@energie24.shop.
-
Victron Victron SmartSolar MPPT 150/60-Tr Solar Charge Controller
- 5-year manufacturer warranty
The Victron SmartSolar MPPT 150/60-Tr is a powerful solar charge controller from the SmartSolar series for demanding 12 V, 24 V, 36 V and 48 V battery systems. It handles up to 60 A of charging current and is designed for a maximum PV open-circuit voltage of 150 V. The SmartSolar series is designed for high yield, smart monitoring and flexible system integration, which is shown here by Bluetooth and VE.Direct, among other things. The Tr version is designed for PV connections via screw terminals and is therefore particularly suitable for fixed wiring. With a maximum efficiency of 98 % and ultra-fast MPPT tracking, the device is very well suited to changing irradiation conditions. Within the series, this model positions itself as a strong solution for medium to larger off-grid and storage applications. 60 A charging current for 12 V, 24 V, 36 V and 48 V battery systems Tr version with PV screw terminals Bluetooth and VE.Direct for monitoring and integration into the Victron system The Victron SmartSolar MPPT 150/60-Tr is an efficient MPPT solar charge controller for battery systems with up to 150 V PV input voltage and 60 A charging current. It combines high solar yield with modern monitoring, flexible configuration and typical SmartSolar system compatibility. Scope of delivery: 1x Victron SmartSolar MPPT 150/60-Tr solar charge controller
-
Victron Victron SmartSolar MPPT 250/70-Tr
- 5-year manufacturer warranty
The Smartsolar MPPT 250/70-tr from Victron Energy (MPN SCC125070210) belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer. The controller handles a full 70A of solar current and can work flexibly with 12/24/36/48 V batteries, with a maximum PV input voltage of 250V DC. Ultra-fast power tracking and automatic power point detection under partial shading are just 2 of the many highlights of this new device class. In addition, this model supports parallel operation with other controllers of the same type. Compared with the Smartsolar 150/..... series, the 250/.... series can handle a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar controller family was able to raise efficiency by a further 1 percent to a total of 99%, setting new standards across the industry. Of all the solar charge controllers we know, this value is currently the best. Compared with the BlueSolar family, the Bluetooth module in the 250 Smartsolar series is also already permanently integrated into the controller, which makes the Smart Dongle unnecessary for this device if you want to analyse and configure the controller via Bluetooth using a smartphone or tablet. Also new is the optionally available LCD display, which can simply be plugged onto the SmartSolar 250/70-tr when needed. The display then provides all the important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition for your SmartSolar charge controller. It safely covers the cable entries or connection terminals of the controller and thus protects them from external influences and contact. Key product features of the SmartSolar 250/70-tr 70A 12V 24V 48V MPPT Victron Energy part number: SCC125070210 max. PV power: 12 V 1000 W / 24 V 2000 W / 48 V 4000 W max. rated charge current 70A, 250V maximum PV open-circuit voltage ultra-fast MPP tracker of the latest generation ensures the best possible yield even under overcast skies automatic detection of the MPP voltage under partial shading provides a further yield improvement compared with "simple" MPPT charge controllers with optional LCD display permanently integrated Bluetooth module for app-supported analysis and configuration of the controller (via the free Victron app on compatible devices) optional LCD display available integrated VE.Direct data communication port for connection to additional devices such as the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency of 99% Parallel operation with other 250/85 controllers possible adjustable constant charge voltage adjustable float charge voltage suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries fully programmable charging algorithms which can later be activated and switched manually via a switch on the housing integrated protection against battery reverse polarity multi-stage and adaptive charging algorithm remote switching on and off possible via 2-pin connector Protection level IP 43 for the electronic components and protection rating IP 22 for the connection area of the controller integrated temperature sensor adjusts float and constant charge voltage according to temperature Day/night timer control and light dimming options Smart configuration and analysis via the Victron Connect app Modern Apple and Android smartphones, tablets, MacBooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course it also provides all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point under partial shading In the case of partial shading, two or more points of maximum power (MPP) can be present on the current-voltage curve. Conventional MPPTs tend to settle on a local MPP. However, this may not be the optimal MPP. The innovative algorithm of the SmartSolar controller will always maximise the energy yield by settling on the optimal MPP. High-speed MPP tracker of the latest generation Especially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30 % compared with PWM charge controllers and by up to 10 % compared with slower MPPT controllers. Optionally available LCD display for retrofitting If you would rather operate and configure the Smartsolar MPPT 250/70-tr directly, you can retrofit the Smartsolar Control SCC900600010 display. The display allows simple configuration of the controller via keypad input and also provides all important performance data at a glance. Extensive electronic protection Protection against reverse-polarity battery connection PV reverse current blocking Protection against overheating of the device Protection against short circuits Protection against reverse-polarity PV connection The VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices coupled to the charge controller, offering the possibility of communication with additional devices such as the GX Color Control system panel. The VE.Direct connection is intended for products where full CAN bus integration (VE-Direct) would cause excessive costs. You can find more information about VE.Direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC125070210 SmartSolar MPPT 250/70-tr 12V 24V 48V 70A Charge Controller1x user manual
-
Victron Victron MultiPlus 12/1200/50-16 230V VE.Bus
- 1 kW
- 5-year manufacturer warranty
The Victron MultiPlus 12/1200/50-16 combines a sine-wave inverter, battery charger and transfer switch in one compact unit for 12-V batteries. It supplies loads without interruption and charges the battery as soon as shore power, the grid or a generator is available. Highlights Uninterrupted switchover: If the grid fails, the unit takes over in less than 20 milliseconds. PowerControl and PowerAssist: Prevents overloading of weak sources and supports load peaks from the battery. VE.Bus connection: For parallel and three-phase operation, remote monitoring and system integration; up to 6 units in parallel. Configuration: Single units via DIP switches, systems with VE.Bus Quick Configure or Assistants. Suitable for vehicles: 12-V models are tested to ECE R10-4. Technical specifications Designation Value Battery voltage 12 V (input range 9.5–17 V) Continuous power at 25 °C 1200 VA / 1000 W Continuous power at 40 °C 900 W Continuous power at 65 °C 600 W Peak power 2400 W Charge current, house battery 50 A Charge current, starter battery 4 A Transfer switch 16 A Max. efficiency 93 % No-load power consumption 8 W Dimensions (H x W x D) 375 x 214 x 110 mm Weight / protection rating 10 kg / IP20 Scope of delivery 1× Victron MultiPlus 12/1200/50-16 Who is it for? For motorhomes, boats, garden houses and small off-grid systems where an inverter, charger and shore-power transfer switch are wanted in a single unit. Good to know The numbers in the model name stand for battery voltage, power, charge current and transfer switch rating. For configuration and monitoring, the MK3-USB, the Multi Control Panel or a GX device are available as accessories. We would be happy to give you personal advice on selection and use: by phone at +49 931 760 260 40 or by e-mail at kontakt@energie24.shop.
-
Victron Victron Phoenix Inverter 12/3000 230V Smart
- 2.4 kW
- 5-year manufacturer warranty
The Phoenix 12/3000 Smart inverter from Victron Energy (MPN PIN122300000) is an advanced inverter based on the proven Phoenix series. It offers a continuous power of 3000W and is designed for 12V battery voltage. Compared with the previous models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration. The Phoenix 12/3000 Smart is further distinguished by its high switching-on power and reliability, and thanks to the integrated ECO mode it also plays in the top league of this device class in terms of self-consumption and efficiency. Features of the Phoenix 12/3000 Smart for 12V battery voltage, output voltage range 210C – 245V Output power (non-linear): 3000W, 2400W linear continuous load at 25 degrees ambient temperature 6000W peak power for handling high starting currents integrated Bluetooth module and VE.Direct port for wireless monitoring and system integration designed for high inrush currents integrated alarm relay, ECO mode Monitoring of input and output voltage, load, alarms etc. via Bluetooth or VE.Direct integrated two-pole connector for connecting an on/off switch (remote control) Parameters configurable via Bluetooth or VE.Direct Low battery voltage alarm Thresholds for switching off and restarting at low battery voltage values Dynamic cut-off: load-dependent shutdown threshold Output voltage: 210 - 245V, frequency: 50 Hz or 60 Hz Threshold for ECO mode on/off and ECO mode sensor Alarm relay High reliability thanks to toroidal transformer topology The complete bridging, combined with a toroidal transformer topology, has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). Very high switching-on power This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Eco mode In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset threshold, the inverter stays switched on. Remote-controlled on/off switching A remote-controlled on/off switch or a relay contact can be connected to the two-pole connector. Alternatively, terminal H (left) of the two-pole connector can be switched to a battery positive terminal, or terminal L (right) of the two-pole connector to the battery negative terminal (or, for example, to the chassis of a vehicle). Scope of delivery: 1x Victron PIN122300000 Phoenix Smart 12/30001x User manual
-
Victron Victron Wallbox EV Charging Station NS up to 22kW 1- and 3-Phase Electric Car
- 5-year manufacturer warranty
The EV Charging Station NS 22 kW (MPN: EVC200300200) from Victron Energy is a powerful EV charging station that you can operate both in 3-phase and in 1-phase mode. In 3-phase operation it delivers an impressive 22 kW of AC power, while in 1-phase mode a solid 7.3 kW is still available. Although technically identical to the EV Charging Station, the new version stands out with a modern design that is available in 3 different colours. Setup, configuration and monitoring are conveniently carried out from VictronConnect via Bluetooth and/or the integrated web interface, which can be reached via a WiFi access point or WiFi LAN. A GX device can also be integrated, enabling remote control. It is particularly noteworthy that surplus solar energy is used directly to charge your vehicle. Manual and time-controlled modes offer additional flexibility to meet the requirements of the electric vehicle, the energy supply system and your overall electric mobility. About the EV Charging Station NS Powerful EV charging station Wi-Fi communication 1- or 3-phase operation Simple operation and control Via Bluetooth and the VictronConnect app Light ring for status display 3 operating modes available Optional coloured fronts: Black White Operation, control and display A single glance in the VictronConnect app or via Bluetooth gives you full control and an overview of all operating parameters and statistics. In addition, a Cerbo GX communication centre can optionally be added for remote monitoring. The charging station is equipped with a fully programmable RGB light ring around the charging connector, which makes it possible to recognise the status of the device at a glance. With the help of the integrated web interface, this light ring can be configured individually to display various lighting effects according to the current state (disconnected, charging, in operation, etc.). Operating modes Manual mode for configuring the output current: In manual mode it is possible to configure the output current flexibly in the range from 6 to 32 A. The charging power can be controlled in various ways: either via the web interface, from a GX device and VRM remote monitoring, or using VictronConnect. In this way it is easily possible to start or stop charging manually as soon as a vehicle is connected to the charging station.Optional GX device for VRM remote monitoring: Victron GX Touch 50 display panel for Cerbo GX Victron GX Touch 70 display panel for Cerbo GX Automatic mode to ensure maximum efficiency of the PV system: The charging station automatically detects when surplus energy is available and uses only this to charge the vehicle. Instead of the energy loss that would occur if surplus energy were wasted, it is stored in the vehicle's battery.Time-controlled mode for charging the vehicle at specific times: Thanks to a fully programmable timer, the vehicle can be charged at different times. For example, during the night when grid costs are lower. Technical specifications Input voltage range: 170-265V AC Rated charging current: 32A / phase Rated power: 22 kW Current output range: 6-32 A Self-consumption: 15 mA at 230 V Operating temperature range: -25°C - +50°C Storage temperature range: -40°C - +80°C Protection class: IP44 Weight: 3 kg Dimensions: 372 x 292 x 122 mm Data communication: Modbus TCP via Wi-Fi, Bluetooth Scope of delivery: 1x Victron Energy EV Charging Station NS 22 kW
-
Victron Victron LiFePO4 12.8/100 Smart battery 12.8V 100Ah 1280Wh
- 1.28 kWh
- 3-year manufacturer warranty
The LiFePO4 12.8V 100Ah Smart battery (MPN BAT512110610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, the LiFePO4 12.8/100 Smart stores a full 1280Wh of electricity, with very low self-discharge and outstanding service life. The Victron LiFePO4 battery family already features integrated cell balancing and a BMS (battery management system) interface. The integrated Bluetooth for connecting to the Li-Ion app rounds off the overall package. Victron LiFePO4 12.8V 100AH Smart Battery Nominal voltage: 12.8V integrated Bluetooth for connecting to the Victron Li-Ion app Victron part number: BAT512110610 Nominal energy at 25°C*: 1280Wh Nominal capacity at 25°C/0°C/-25°C: 100Ah / 80Ah / 50Ah Number of cycles at depth of discharge 80%/70%/50%: 2500 / 3000 / 5000 cycles recommended continuous discharge current: 100A maximum continuous discharge current: 200A Weight: 14kg Connection terminal: M8 You will find further technical data in the official data sheet and further below in the "Technical specifications" section. Efficient, economical...: LiFePO4 12.8V 100Ah Smart Battery LiFePO4 batteries are expensive compared with AGM or gel batteries, but in most cases the higher purchase cost more than pays off. With a service life of up to 5000 cycles, you exceed the maximum service life even of the best lead-acid batteries many times over. In addition, the LFP 12.8/100 scores with space savings and weight savings of 70% each. The energy efficiency of 92% is also well above the 80% of lead-acid batteries, which can be of essential importance especially in off-grid systems, in particular in off-grid solar and/or wind power systems. All-rounder: infinitely flexible with lithium technology from Victron Energy Victron LiFePO4 Smart batteries can be implemented in almost all common applications. In the mobile sector, this technology has played an important role for some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and irregular charging does them no harm, they are also making their way into stationary applications and can now be found in almost all system classes. Parallel and series connection (max. 20 batteries per BMS) Thanks to the integrated cell balancing and cell monitoring function, you can conveniently connect up to 20 batteries of this type per BMS in parallel and in series – this corresponds to a maximum nominal energy of 84 kWh (12 V) or 102 kWh (24/48 V). Integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful for detecting a (possible) problem such as a cell imbalance in good time. IMPORTANT NOTE: The use of an additional BMS is mandatory in order to interrupt or switch off the load if the voltage of a battery cell falls below 2.5V, or to stop charging if the voltage of a battery cell rises above 4.2V, and to switch off the system if the cell temperature exceeds 50°C. You can choose between the BMS 12/200 and the VE.Bus BMS for this purpose – please refer to the respective product descriptions of the devices for further details. Scope of delivery: 1x Victron Energy BAT512110610 LiFePO4 12.8V 100AH Smart Battery1x Operating manual Further resources on lithium batteries: Victron LiFePO4 batteries - all product families from the LiFePO4 battery category from VE Lithium batteries category - complete range with all available batteries in this area
-
Victron Victron Blue Smart IP65 12/15 12V 230V battery charger
- 5-year manufacturer warranty
The Blue Smart IP65 12/15 12V 230V battery charger (BPC121532064R) is the latest professional charger from Victron Energy with built-in Bluetooth. It is designed for charging 12V batteries of many different types and delivers a maximum charging current of 15A. Together with the free VictronConnect app, you can easily and smartly monitor the activity of your battery charger via your smartphone, tablet or computer, and even configure it to a certain extent.Technical highlights of the Blue Smart IP65 12/15 battery charger easy configuration and setup of the Blue Smart IP65 12/15 via Bluetooth interface suitable for all 12V battery types max. 15A charging current solid protection against splashing water, dust and chemicals thanks to protection rating IP65 has several functions to extend battery life automatic temperature compensation at low and high temperatures automatic power supply function 7-stage, intelligent charging algorithm can restore completely discharged batteries ("dead batteries") has a low-power mode for charging small batteries Victron article number: BPC121532064R Lithium-ion battery mode Ultra-high-efficiency battery chargerWith an efficiency of up to 95%, these chargers generate three to four times less heat than the industry standard. And once the battery is fully charged, power consumption drops to 0.5 watts, which is five to ten times better than the industry standard.Durable, safe and quiet low thermal load on the electronic components protected against the ingress of dust, water and chemicals. Overheating protection: the output current is reduced linearly if the temperature rises up to 60 °C, so the charger does not fail even at extreme temperatures the chargers are completely silent thanks to passive cooling: no fan or other moving parts ReconditioningA lead-acid battery that has not been charged sufficiently, or that has been left in a discharged state for days or weeks, loses performance due to sulphation. If the process is stopped in time, the sulphation can be partially reversed by charging the battery with a low current until a higher voltage has been reached.Function for restoring completely discharged batteriesMost chargers with reverse polarity protection do not detect a battery that has been discharged to zero volts or almost zero volts, and therefore do not recharge it. The Blue Power charger, however, tries to recharge a completely discharged battery with a low current and resumes normal charging once sufficient voltage has built up across the battery terminals.Optional accessories for the Blue Smart IP 65 12/15 BPC121532064R 12 V cigarette lighter plug with fuse 2 metre extension cable Terminals with fuses M6 ring terminal connector with fuse Scope of delivery: 1x Victron BPC121532064R Blue Smart IP65 12/15 12V 230V battery charger1x Operating manual1x Terminals1x M8 ring terminal connector
-
Victron Victron Phoenix Inverter 24/1200 230V VE.Direct 1000W 24V
- 1 kW
- 5-year manufacturer warranty
The Victron Phoenix 24/1200 VE.Direct (MPN PIN242120200) is a small sine-wave inverter with 1000W continuous power. The unit converts 24V DC from your battery into 230V AC alternating current with a pure sine-wave voltage and uncompromising power quality that is also ideally suited for sensitive electronic products. Pioneering efficiency and modern system communicationThe efficiency of the Phoenix is outstanding and, thanks to the ECO mode, one of the highest in its class. Via the VE.Direct communication port, you can connect the unit to a computer or a smartphone using optional accessories and freely program a number of system parameters such as the shutdown voltage and restart voltage when the battery is empty! Many further configuration options such as output frequency and output voltage, as well as a 2-pole alarm contact, are among the features of this voltage converter. The range of features of the Phoenix VE.Direct 24/1200 series is currently unique on the market for the price and goes far beyond the capabilities of other devices in the same power classes.Technical features of the Phoenix 1241200 VE.Direct 1000 watts continuous power at 230V 50Hz sine-wave voltage 1200 watts continuous power under non-linear load full control over almost all system parameters suitable for all common 24V batteries 230V AC power with a pure sine wave delivers perfect power quality freely programmable switch-on and switch-off thresholds freely adjustable output voltage in the range of 210 – 245V Technical highlights of the Phoenix VE.Direct series 250VA – 1200VA The VE.Direct connection allows the power converter to be connected to a computer (VE.Direct to USB interface cable required) or to your smartphone, on which you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: thresholds for triggering and resetting alarms at a low battery state of charge + thresholds for switching off and restarting at low battery voltage values + output voltage 210 - 245V + thresholds for switching off and restarting at low battery voltage values + frequency 50 Hz or 60 Hz + threshold for ECO mode on/off and ECO mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on for a short period (adjustable default setting: every 2.5 seconds). If the load exceeds a preset threshold, the inverter stays switched on. Proven reliability of the power converter: The complete bridging, combined with a toroidal transformer topology, has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). High switching-on power: This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Remote-controlled on/off switching possible: A remote-controlled on/off switch can be connected with a two-pole connector or between the positive terminal of the battery and the left contact of the two-pole connector. Scope of delivery:1x Victron PIN242120200 Phoenix 24/1200 24V to 230V 1000W 50Hz 60Hz
-
Victron Victron Phoenix Smart IP43 Charger 12/50(1+1)
- 5-year manufacturer warranty
The Phoenix Smart Charger 12/50(1+1) IP43 from Victron Energy (MPN PSC125051085) is a powerful battery charger of the latest generation. The device is designed for a 12V battery voltage and, in addition to the powerful 50A main charging output, also offers a secondary charging output with 4A charging power for a starter battery. With its integrated Bluetooth module, the Phoenix Smart Charger 12/50(1+1) IP43 fits into Victron's ever-growing Smart family, which can be networked perfectly and also controlled centrally in several ways. In addition to the Bluetooth module, there is also a VE.Direct port and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control battery temperature compensation. The proven five-stage charging algorithm and the ability to program your own charging algorithm make the Phoenix Smart Charger 12/50(1+1) IP43 a universally usable high-tech battery charger that can charge almost any battery type optimally. Perfect battery charger for boats and vehicles Phoenix Smart battery chargers with (1+1) in the model name have one main charging output with full charging current and one 4A secondary charging output for charging starter batteries. These models are therefore particularly suitable for mobile applications. The Phoenix Smart models with (3) in the model designation were developed especially with the needs of the marine sector in mind and offer three full current outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/50(1+1) IP43 integrated Bluetooth module integrated VE.Direct ports 1x 50A main charging output and 1 additional secondary charging output for starter batteries automatic voltage compensation adaptive five-stage charging algorithm variable absorption phase optimally charges all common battery types prevents damage from gassing thanks to BatterySafe mode reduced ageing during storage thanks to Storage mode also charges LiFePO4 batteries and can be connected to a BMS via optocoupler fully programmable charging algorithm Remote on/off can be used as a power source Technical features of the Phoenix Smart 12/30(1+1) Victron part number: PSC125051085 Number of battery banks: 1+1 (1 main output at full power + 1x starter battery (max. 4A charging) maximum rated charging current: 50A, battery voltage: 12V high efficiency: 94% Protection class: IP43 (electronic components), IP22 (connection area) you will find further data under the technical specifications Three integrated technologies for thoroughly healthy batteries Variable absorption phase: always delivers the right amount of charge With low battery discharge (e.g. a yacht connected to shore power), a short absorption phase is selected to avoid overcharging. After a deep discharge, the absorption phase is automatically extended to make sure the battery is fully charged. Preventing damage from excessive gassing: BatterySafe mode To shorten the charging time, the highest possible charging current was selected together with a high absorption voltage. To avoid excessive gas formation toward the end of the constant-current phase, however, the charger limits the rate of voltage rise once the gassing voltage has been reached (see also the graphs in the brochure). Less maintenance and ageing while the battery is idle: Storage mode Storage mode is activated whenever no discharge has occurred within 24 hours. In Storage mode, the float voltage is then lowered to 2.2 V/cell (13.2 V for a 24-V battery) to minimise gas formation and corrosion on the positive plates. Once a week, the voltage is raised to the level of the gassing voltage. This achieves a kind of equalisation charge that prevents electrolyte stratification and sulphation - the two main causes of premature battery failure. Also perfectly suited to LiFePO4 batteries An on/off control can be fitted to the Phoenix Smart Charger 12/50(1+1) IP43 by connecting a relay or an open-collector optocoupler output from a Li-ion BMS to the remote on/off port. Alternatively, voltage and current can also be controlled entirely via Bluetooth. VE.Direct interface, Bluetooth and programmable relay Thanks to the VE.Direct port, the Victron Phoenix Smart Charger 12/50(1+1) IP43 is ideally suited for a wired data connection with a Color Control panel, a PC or other devices. Also note the VictronConnect app for Android and iOS, which you can use with any smartphone or tablet to control and read out your Phoenix Charger wirelessly via Bluetooth. The programmable relay can also be programmed via the VE.Direct interface or a Bluetooth-capable device to trigger an alarm or other events. Required accessories Please note that an AC connection cable is required to connect the Phoenix Smart Charger 12/50(1+1) IP43 to the power grid. This is not included in the scope of delivery. Scope of delivery1x PSC125051085 Victron Phoenix Smart Charger 12/50(1+1) IP43 1x AC cable clamp 1x user manual
-
Victron Victron Blue Smart 12/7 IP67 12V 230V Battery Charger
- 5-year manufacturer warranty
The Blue Smart IP 67 12/7 12V 230V battery charger from Victron Energy (MPN BPC120713006) is a smart, high-performance battery charger of the latest generation with 7A charging current for charging 12V AGM, gel and lead-acid batteries as well as lithium-ion batteries. In terms of functionality, the Blue Smart IP67 series is identical, apart from a few functions, to the chargers of the Blue Smart IP 65 and IP 22 device families. Only the operating environment for which these chargers are designed differs.Thanks to integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new functions become available.Key features of the Blue Smart IP67 12/7 battery charger Victron part number: BPC120713006 Model designation: Blue Smart IP 67 12/7 max. charging current: 7A for battery voltage: 12V DC for mains voltage: 180-265 VAC 45-65 Hz fully encapsulated: waterproof, shockproof and fire-retardant smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage charging algorithm extends the life of your batteries thanks to integrated storage mode can be used to power 12V loads high-quality die-cast aluminum housing Protection against application errors: reverse polarity at the battery (fuse), overtemperature protection, output short-circuit protection Fully encapsulated: waterproof, shockproof and fire-retardantWater, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of die-cast aluminum and the electronics are coated with resin.One of the highest charging efficiencies ever!Setting a new industry standard: With an efficiency of at least 92% or more, these chargers produce three to four times less heat.Adaptive 5-stage charging algorithmThe Blue Smart charger is distinguished by its microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the way the battery is used. "Bulk" (constant-current phase) "Absorption" (constant-voltage phase) "Recondition" (regeneration phase) "Float" (float voltage phase) "Storage" (storage mode) Storage mode: Less maintenance and aging when the battery is at restStorage mode is activated whenever no discharge has occurred within 24 hours. In storage mode, the float voltage is then lowered to 2.2 V/cell (13.2 V for a 24 V battery) in order to minimize gas formation and corrosion of the positive plates. Once a week, the voltage is raised to the gassing voltage level. This achieves a kind of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Key differences from the Blue Smart IP 65 familyThe two device groups differ in the following respects: the protection rating; the IP 67 devices offer the best possible protection Blue Smart IP 65 devices have a 7-stage charging algorithm , whereas the IP67 has 5 stages Scope of delivery:1x Victron BPC120713006 Blue Smart IP67 12/7 7A 12V 230V battery charger1x user manual1x 1.5m battery connection cable red/black
-
Victron Victron Orion-Tr 48/12-9 isolated DC DC converter 48V to 12V 9A 110W
- 5-year manufacturer warranty
The Victron Orion-Tr 48/12-9 (MPN ORI481210110) is an isolated DC DC voltage converter and provides a regulated DC voltage and thus trouble-free operation of your DC loads. The unit converts the DC input voltage (32-70V) into an adjustable 12V output voltage (10-15V) and delivers a constant continuous current of 9A, which corresponds to a power of 110W. This allows you to supply every 12V load with exactly the right voltage. For many sensitive electronic devices, maintaining the exact operating voltage is essential for flawless operation. The Orion-Tr 48/12-9 also supports parallel connection with identical units and has a remotely controllable on/off switch. Key features of the Orion-Tr 48/12-9 110W (with galvanic isolation) 48V DC operating voltage, adjustable 12V output voltage 10-15V can be connected in parallel with similar units to increase power remotely controllable on/off switch Protection rating IP43 wide input voltage range: 32V – 70V 110W power at 9A continuous current max. 12.5A output current high efficiency of 87% weighs only 0.42 KG Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge batteries. DC-DC converters of the Orion family generate a clean output voltage in the range of 10 - 15V DC from a 48V power source and compensate for any cable losses as well as fluctuations in battery voltage. Remotely controllable on/off switchThanks to the remote on/off connection, a high-current switch in the input wiring is no longer necessary. The remote on/off connection can be controlled with a power-saving switch or by the engine's run/stop switch (see manual). Can be connected in parallel to increase the output current An unlimited number of identical units can be connected in parallel to increase the output power. Scope of delivery:1x Victron Energy ORI481210110 Orion 48/12-9 DC DC converter 48V to 12V (10-15V adjustable) 9A 120W
-
Victron Victron SmartSolar MPPT 250/85-Tr Charge Controller VE.Can
- 5-year manufacturer warranty
The Victron SmartSolar MPPT 250/85-Tr is an MPPT charge controller with a VE.Can interface for 12-, 24- and 48-V battery systems with a rated charge current of 85 A. The maximum PV open-circuit voltage of 250 V allows longer module strings; Bluetooth is built in. Highlights Efficiency: Maximum of over 99%, fanless. Ultra-fast MPPT: More yield under changing cloud cover: up to 30% compared with PWM controllers. Parallel operation: Up to 25 controllers synchronised via VE.Can or up to 10 via Bluetooth. Communication: VE.Can, VE.Direct and Bluetooth Smart; optional plug-in display. Programmable relay: Switches on alarms or other events; remote on/off via 2-pin connector. Technical specifications Designation Value Rated charge current 85 A Battery voltage 12/24/48 V (automatic, 36 V manual) Rated PV power 12 / 24 V 1200 W / 2400 W Rated PV power 36 / 48 V 3600 W / 4900 W Max. PV short-circuit current 70 A (max. 30 A per MC4 connection) Max. PV open-circuit voltage 250 V absolute, 245 V start-up and operation Max. efficiency 99% PV connection Screw terminals 35 mm² Operating temperature -30 to +60 °C Protection rating IP43 (electronics), IP22 (connection area) Dimensions (H x W x D) 216 x 295 x 103 mm Weight 4.5 kg Scope of delivery 1× Victron SmartSolar MPPT 250/85-Tr (85 A) charge controller 1× user manual Who is it for? For larger off-grid systems, hybrid storage and motorhomes with longer module strings that want to use central monitoring via GX devices and VE.Can. Good to know The module layout should be chosen so that the short-circuit current of 70 A is not exceeded. The controller is intended for indoor spaces without climate control. Installation and system design should be checked by a qualified electrician. We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by email at kontakt@energie24.shop.
-
Victron Victron BlueSolar MPPT 150/35 12V 24V 48V 35A
- 5-year manufacturer warranty
The Victron MPPT 150/35 (MPN SCC020035000) belongs to the large family of BlueSolar MPPT charge controllers and, like its larger siblings, already offers ultra-fast power tracking and can thereby increase the yield of your solar system. Besides the higher charging and PV power, this Blue differs even more from the next smaller model, the 100/30. The battery voltage range has also increased with the smallest 150 model, so that 48V battery banks can be used as well.VE.Direct options for programming, real-time data and display of the history Modern Apple and Android smartphones, tablets, MacBooks and other devices can, for example, be connected via VE.Direct with the Bluetooth Smart dongle and the MPPT app or the GX Color Control. Please note that the Bluetooth Smart dongle and the GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as options.Latest-generation high-speed MPP trackerEspecially under overcast skies, when the light intensity changes constantly, an extremely fast MPPT controller improves the energy yield by up to 30% compared with PWM charge controllers and by up to 10% compared with slower MPPT controllers. In addition, the 150/35 offers several other innovative technologies such as the VE.Direct communication port.Comprehensive electronic protection- Protection against reverse battery connection- PV reverse-current protection- Protection against device overheating- Protection against short circuits- Protection against reverse PV connectionKey product features of the BlueSolar 150/35 35A 12V 24V 36V 48V MPPT ultra-fast latest-generation MPP tracker ensures the best possible yield even under overcast skies automatic detection of the MPP voltage under partial shading provides a further yield improvement compared with "simple" MPPT charge controllers integrated VE.Direct data communication port for connecting to auxiliary devices such as the Bluetooth Smart dongle or the GX Color Control panel high maximum efficiency of 98% fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Rated charging current 35A, 150V maximum PV open-circuit voltage 12V:500W/24V:1000W/36V:1500W/48V:2000W integrated protection against reverse battery polarity multi-stage and adaptive charging algorithm integrated temperature sensor adjusts the float and absorption voltage according to temperature day/night timer and light dimming option VE.Direct data communication portVE.Direct in text mode transmits all important parameters every second to other devices coupled to the charge controller and thus allows communication with auxiliary devices such as the Bluetooth Smart dongle or the Victron GX Color Control panel. The VE.Direct port is intended for products for which a full CAN bus integration (VE.Direct) would cause excessive costs. You will find more information about VE.Direct in our Victron brand world.Scope of delivery1x Victron SCC020035000 BlueSolar MPPT 150/35 12V 24V 36V 48V 35A charge controllerOperating manual
-
Victron Victron Phoenix Inverter 12/800 230V VE.Direct 650W 12V
- 650 W
- 5-year manufacturer warranty
The Victron Phoenix Inverter 12/800 VE.Direct generates 230 V AC voltage (sine wave) with 800 VA continuous power from 12 V battery voltage. It is short-circuit proof, protected against overheating and suitable for vehicles, boats and off-grid systems. Highlights Continuous power: 800 VA; 650 W at 25 °C and 560 W at 40 °C. High starting power: Peak power of 1500 W, suitable for LED converters, halogen lamps and power tools. Configurable: Shutdown and alarm thresholds, output voltage (210–245 V), frequency 50 or 60 Hz, ECO mode. VE.Direct: Connection to a PC, or to a smartphone and tablet via Bluetooth dongle (each available separately). Remote switching: Remote-controlled on/off via a two-pole connector. Technical specifications Designation Value Continuous power at 25 °C 800 VA / 650 W Continuous power at 40 °C 560 W Peak power 1500 W Input voltage (12-V model) 9.2–17 V Output voltage 230 VAC ±3 %, 50 Hz Max. efficiency 90 % No-load power consumption 6.5 W Operating temperature -40 to +65 °C Protection rating IP21 Dimensions (H x W x D) 105 x 230 x 325 mm Weight 5.5 kg Scope of delivery 1× Victron Phoenix Inverter 12/800 (12 V to 230 V) Who is it for? For campers, sailors and operators of small off-grid systems who want to supply medium-power household appliances from a 12-V battery. Good to know According to the manufacturer's data sheet, the continuous power at 25 °C is 650 W; please plan the load with this value. At higher temperatures, the power is reduced. We would be happy to give you personal advice on selection and use: by phone at +49 931 760 260 40 or by e-mail at kontakt@energie24.shop.
-
Victron Victron VE.Bus BMS V2 Battery Management System
- 5-year manufacturer warranty
The Victron Energy VE.Bus BMS V2 (MPN: BMS300200200) is the next generation of the VE.Bus BMS for Victron Lithium Smart batteries (LFP-Smart) 12.8V and 25.6V. Every single cell of a LiFePO4 battery must be protected against overvoltage, undervoltage and overtemperature. This is exactly the task taken on by the VE.BUS BMS V2. The product is suitable for protecting 12V, 24V and 48V battery banks and operates in an operating voltage range of 9 – 70 VDC. VE-BUS BMS V2 in combination with Victron LiFePO4 batteries Victron LiFePO4 batteries have built-in cell balancing, temperature and voltage control (abbreviated BTV). They are connected to the VE.Bus BMS V2 via two M8 circular connector cable sets. The BTVs of several batteries can be daisy-chained. They can be connected in series, in parallel and both in series and in parallel, so that a battery bank of 12V, 24V or 48V can be designed. Up to 20 batteries in one system are possible, resulting in an energy storage capacity of max. 84kWh in a 12V system and 102kWh in a 24V and 48V system. For further details, please refer to the technical documentation for our LiFePO4 battery. Core functions of the Victron VE.Bus BMS V2 Developed specifically for use with Victron Lithium Battery Smart 12.8 V & 25.6 V batteries. Communicates directly with the lithium battery via the battery's M8 circular connector cables Switching off or disconnecting VE.Bus inverters or inverter/chargers via VE.Bus and other loads via the "Load disconnect" terminal in the event of cell undervoltage Switching off or disconnecting VE.Bus inverters or inverter/chargers via VE.Bus, VE.Direct and VE.Can solar chargers via a GX device and other chargers via the "Charge disconnect" terminal in the event of cell overvoltage, undertemperature or overtemperature. Difference from the VE.Bus BMS The VE.Bus BMS V2 was developed specifically for use in systems with GX devices and is therefore perfectly suited to ESS or backup applications with a battery capacity of up to 84kWh (12V) or 102kWh (24V/48V).In addition, the BMS V2 has a remote contact for remote control (ON/OFF). Communication with VE.Bus products MultiPlus, Quattro or Phoenix inverters are connected to the "MultiPlus/Quattro" port with a standard RJ45 UTP cable.The BMS disables inverting in the event of cell undervoltage and charging in the event of cell overvoltage or overtemperature Communication with remote control devices A GX device (e.g. Cerbo GX), a Digital Multi Control (DMC) panel or a VE.Bus Smart Dongle (including any combination) can be connected to the BMS via the "Remote panel" port. This accessory can be used in combination with the BMS to remotely control the switching state of the VE.Bus inverter or inverter/charger (On / Off / Charger only) Terminals for auxiliary inputs and outputs The BMS has a dedicated power output (GX-Power) for a GX device and an additional power input (Aux-In) for an external DC source, e.g. a mains adapter. In the event of a system shutdown, the GX device continues to be supplied with power via the auxiliary voltage input or is disconnected from the grid to prevent further discharge of the battery Technical specifications Input voltage range: 9-70VDC Current consumption - normal operation: 10mA (load disconnect current not included) GX-Pow output: 1A Aux-In input: 1A VE.Bus interface: 2x RJ45 sockets for connection to all VE.Bus products Operating temperature range: -20°C - +50°C Humidity: max. 95% (non-condensing) Protection class: IP20 Weight: 120 grams Dimensions: 105.5 x 94.5 x 23.8 mm Scope of delivery: 1x Victron Energy BMS300200200 VE.Bus BMS V2 Battery Management System1x user manual
-
Victron Victron EV charging station for electric vehicles
The Victron Energy EV charging station can be used both in 3-phase and in 1-phase operation. It delivers a maximum of 22kW AC in 3-phase mode or 7.3kW in 1-phase mode. The station can be monitored and controlled with the integrated LCD touchscreen. An external residual-current circuit breaker is required for protection (not included in the scope of delivery). A cable cross-section of 6mm² is recommended for the installation line. A qualified electrician should be consulted for the connection. Key features High charging power Wi-Fi communication LCD touchscreen Light ring for quick display of the device status Configurable price/kWh calculator Two operating modes available Integration with GX devices possible Integration with the VRM portal possible Two operating modes to choose from You can choose between the manual and the automatic mode. The automatic mode detects when surplus energy is available and uses only this energy to charge the vehicle. The manual mode allows a configurable output current between 6-32A. The charging power can be controlled either via the slider on the LCD touchscreen or via the website. It allows you to start or stop charging manually when a vehicle is connected to the charging station. Programmable light ring The fully programmable light ring around the charging connector provides the current device status quickly and easily. It can be programmed via the web interface so that different light effects are displayed depending on the current state (charging, charged, disconnected, etc.). This allows the user to recognise the current charging status even from a distance. 55 different light effects are available. Technical specifications Input voltage range: 170-265 V/AC Rated charging current: 32A / phase Rated power: 22kW Current output range: 6-32A Self-consumption: 15mA at 230V Operating temperature range: -25°C - +50°C Protection rating: IP44 Weight: 3kg Dimensions: 377 x 307 x 148 mm Scope of delivery: 1x Victron Energy EV charging station
-
Victron Victron SmartSolar MPPT 150/85-Tr Charge Controller VE.Can
- 5-year manufacturer warranty
The Smartsolar MPPT 150/85-tr from Victron Energy (MPN SCC115085411) belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection under partial shading are just 2 of the many highlights of this new class of device. The devices in the 150/45tr to 150/100-tr classes are also available as a version with MC4 connectors on the solar side of the charge controller instead of screw terminals. In addition, this model supports parallel operation with other controllers of the same type. Compared with the BlueSolar series, the Bluetooth module of the Smartsolar family is already permanently integrated in the controller, which makes the Smart dongle unnecessary for this device. Also new is the optional LCD display, which can simply be plugged onto the SmartSolar 150/85-tr when needed. The display then provides all important information about the controller. If required, the MPPT WireBox-XL Tr from Victron Energy is the ideal addition to your SmartSolar charge controller. It safely covers the cable entries and connection terminals of the controller and protects them from external influences and accidental contact. Key product features of the SmartSolar 150/85-Tr 85A 12V 24V 36V 48V MPPT ultra-fast latest-generation MPP tracker ensures the best possible yield even under overcast skies automatic detection of the MPP voltage under partial shading provides a further yield improvement compared with "simple" MPPT charge controllers with optional LCD display permanently integrated Bluetooth module for app-based analysis and configuration of the controller (via the free Victron app on compatible devices) optional LCD display available integrated VE.Direct & VE.Can data communication port for connecting accessories such as the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% parallel operation with other 150/85 controllers possible Adjustable absorption charge voltage Adjustable float charge voltage Suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing rated charging current 85A, 150V maximum PV open-circuit voltage maximum PV power: 12V 1200W / 24V 2400W / 48V 4900W integrated reverse battery polarity protection multi-stage and adaptive charging algorithm remote on/off switching possible via 2-pin connector protection rating IP 43 for the electronic components and IP 22 for the connection area of the controller integrated temperature sensor adjusts float and absorption charge voltage according to temperature day/night timer control and light dimming option Smart data communication via VE.Direct and lightning-fast Bluetooth module Modern Apple and Android smartphones, tablets, MacBooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point under partial shading In the case of partial shading, two or more points of maximum power (MPP) can be present on the current-voltage curve. Conventional MPPTs tend to settle on a local MPP, which may not be the optimal MPP. The innovative algorithm of the SmartSolar device always maximises the energy yield by locking onto the optimal MPP. High-speed latest-generation MPP tracker Especially under overcast skies, when the light intensity changes constantly, an extremely fast MPPT controller increases the energy yield by up to 30 % compared with PWM charge controllers and by up to 10 % compared with slower MPPT controllers. Comprehensive electronic protection protection against reverse battery polarity PV reverse current protection protection against overheating of the device protection against short circuits protection against reverse PV polarity The VE.Direct data communication port In text mode, VE.Direct transmits all important parameters every second to other devices coupled to the charge controller, making communication with accessories such as the GX Color Control system panel possible. The VE.Direct port is intended for products where full CAN bus integration (VE.Direct) would cause excessive costs. You can find more information about VE.Direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC115085411 SmartSolar MPPT 150/85-Tr 12V 24V 36V 48V 85A Charge controllerUser manual
You have seen 312 out of 372 products
First consider what you are planning: a balcony power plant (plug-in solar system), a roof system or retrofitting a battery. Then choose panels, inverters and accessories that match each other. The subcategories help you narrow down.
Among other things, we carry solar panels, inverters from Hoymiles, Growatt, SMA, Fronius and Huawei, battery storage from Zendure, Anker and BYD, as well as mounts, cables and wallboxes (EV chargers). The range extends from small parts to complete systems.
For each subcategory you will find tips on choosing. If you are planning a complete system, consider panels, inverter, storage and mount together so that power, voltage and fastening fit together. You will find further answers in our PV and solar FAQ. Grid registration and connection belong in the hands of a qualified electrician.
For personal advice, contact us on +49 931 760 260 40 or by email at kontakt@energie24.shop.
Frequently asked questions
Where do I start?
With a question about your needs: how much electricity do you use, and where should the system go?
Do you also advise on system design?
Yes, by phone or email.
Do I have to register my system?
That depends on the type of system. Inquire with your grid operator and the Bundesnetzagentur (German Federal Network Agency).