Products
-
Victron Victron Phoenix Inverter 12/1200 230V VE.Direct 1000W 12V
The Victron Phoenix 12/1200ve.direct (MPN PIN122120200) is a small sine inverter with a continuous output. The device converts 12V DC voltage from your battery into 230V AC AC, with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products.directional efficiency and modern system communicationThe efficiency of the Phoenix is excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter.The scope of services of the Phoenix series VE.Direct 12/1200 is currently unique on the market for the price and goes far beyond the skills of other devices from the same performance classes.Technical features of the Phoenix 12/1200 Ve.direct 1000 watts of continuous power at 230V 50Hz sinus voltage 1200 watt continuous output with non -linear load full control over almost all system parameters Suitable for all common 12V batteries 230V AC electricity with pure sinus shaft provides perfect power quality freely programmable input and offset swells freely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 1200VA Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free VICTRON app (Ve.direct Bluetooth Smart Dongle required). Fully programmable parameters: threshold values for triggering and resetting alarms with a low loading status of the battery + swelling values for switching off and restarting at low battery voltage values + output voltage 210 - 245V + swelling values for switching off and restarting at low battery voltage values + frequency 50 Hz or 60 Hz + swelling value for ECO mode on/off and Eco mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).High switch-on power: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.Remote-controlled insert/off connection possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug.Scope of delivery:1x Victron Pin122120200 Phoenix 12/1200 12V on 230V 1000W 50Hz 60Hz
€303,00
-
Victron Victron Phoenix inverter 12/3000 230V Smart
The Phoenix 12/3000 Smart inverter from Victron Energy (MPN PIN122300000), is a progressive inverter based on the proven Phoenix series. It offers a continuous output of 3000W and is designed for 12V battery voltage. Compared to the predecessor models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration. The Phoenix 12/3000 Smart continues to be characterized by its high switching power and reliability and thanks to the integrated ECO mode, also plays in the top division of this device class in terms of self-consumption and efficiency. Problem features Phoenix 12/3000 Smart for 12V battery voltage, output voltage range 210c - 245V Output power (not linear): 3000W, 2400W linear permanent load at 25 degrees ambient temperature 6000W top performance coping with high starting currents Integrated Bluetooth module and VE.Direct Port for wireless surveillance and system integration designed for high insertion flows Integrated alarm relay, eco mode Monitoring of the input and output voltage, load and alarms etc. via bluetooth or ve.direct Integrated, two-pin connector to connect an on/off switch (remote control) About bluetooth or ve.direct configurable parameters Alarm low battery voltage Threshold values for switching off and restarting with low battery voltage values Dynamic switching off: load-dependent switch-off threshold value Output voltage: 210 - 245V, frequency: 50 Hz or 60 Hz Threshold value for ECO mode on/off and ECO mode sensor Alarm relay High reliability thanks to the ring transformeropology The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature). Very high switching power This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools. Eco mode In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on every 2.5 seconds for a short period of time (can be regulated). If the load exceeds the preset threshold value, the inverter remains on. Remote -controlled on/off circuit A remote-controlled on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, the connection H (left) of the two-pin connector can be switched to a battery plus pole or the connection l (right) of the two-pin connector to the battery minus pole (or for example to the body of a vehicle). Scope of delivery: 1x Victron Pin122300000 Phoenix Smart 12/30001x operating instructions
€782,00
-
Victron Victron Phoenix Inverter 12/800 230V VE.Direct 700W 12V
The Victron Phoenix 12/800ve.direct (MPN PIN121800200) is a small sinus inverter with 700W permanent output. The device converts 12V DC voltage from your battery into 230V AC AC, with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products. directional efficiency and modern system communicationThe efficiency of the Phoenix is excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter. The scope of the PHOENIX series Ve.direct 12/800 is currently unique on the market for the price and goes far beyond the skills of other devices from the same performance classes.Technical features of the Phoenix 12/800 Ve.direct 700 watts of continuous power at 230V 50Hz sinus voltage 800 watt continuous output with non -linear load full control over almost all system parameters Suitable for all common 12V batteries 230V AC electricity with pure sinus shaft provides perfect power quality freely programmable input and offset swells freely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 800VA Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free VICTRON app (Ve.direct Bluetooth Smart Dongle required). Fully programmable parameters: threshold values for triggering and resetting alarms with a low loading status of the battery + swelling values for switching off and restarting at low battery voltage values + output voltage 210 - 245V + swelling values for switching off and restarting at low battery voltage values + frequency 50 Hz or 60 Hz + swelling value for ECO mode on/off and Eco mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature). High switch-on power: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools. Remote-controlled insert/off connection possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug. Scope of delivery:1x Victron Pin121800200 Phoenix 12/800 12V on 230V 700W 50Hz 60Hz
€229,00
-
Victron Victron Phoenix Inverter 24/1200 230V VE.Direct 1000W 24V
The Victron Phoenix 24/1200ve.direct (MPN PIN242120200) is a small sine inverter with a permanent performance of 1000W. The device converts 24V DC voltage from your battery into 230V AC AC, with a pure sine voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products. directional efficiency and modern system communicationThe efficiency of the Phoenix is excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter. The scope of the PHOENIX series Ve.direct 24/1200 is currently unique on the market for the price and goes far beyond the skills of other devices from the same performance classes.Technical features of the Phoenix 1241200 Ve.direct 1000 watts of continuous power at 230V 50Hz sinus voltage 1200 watt continuous output with non -linear load full control over almost all system parameters Suitable for all common 24V batteries 230V AC electricity with pure sinus shaft provides perfect power quality freely programmable input and offset swells freely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 1200VA Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free VICTRON app (Ve.direct Bluetooth Smart Dongle required). Fully programmable parameters: threshold values for triggering and resetting alarms with a low loading status of the battery + swelling values for switching off and restarting at low battery voltage values + output voltage 210 - 245V + swelling values for switching off and restarting at low battery voltage values + frequency 50 Hz or 60 Hz + swelling value for ECO mode on/off and Eco mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature). High switch-on power: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools. Remote-controlled insert/off connection possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug. Scope of delivery:1x Victron Pin242120200 Phoenix 24/1200 24V on 230V 1000W 50Hz 60Hz
€303,00
-
Victron Victron Phoenix Smart IP43 Charger 12/50 (1+1)
The Phoenix Smart Charger 12/50 (1+1) IP43 from Victron Energy (MPN PSC125051085) is a powerful battery charger of the latest generation. The device is designed for 12V battery voltage and, in addition to the strong 50a main charging output, also offers a secondary charging output with 3a charging power for a starter battery. The Phoenix Smart Charger 12/50 (1+1) IP43 fits into the integrated Bluetooth module in which the Victron smart family is becoming increasingly becoming, which can be perfectly networked and can also be controlled centrally. In addition to the Bluetooth module, there is also a VE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense to control the battery temperature compensation can also be connected. The proven five-stage loading algorithm and the possibility of programming its own charging algorithm make the Phoenix Smart Charger 12/50 (1+1) IP43 a universally applicable high-tec battery cador, which can optimally load almost every battery type. Perfect battery charger for boats and vehicles Phoenix smart battery charger devices that (1+1) contain in the model name have a main charging output, with a full charging current and a 3A ancillary charging output for charging starter batteries. These models are therefore particularly suitable for the mobile area. The Phoenix Smart models with (3) in the model name were developed particularly with regard to the needs in the marine area and offer three full power outputs for charging 3 battery benches. Highlights of the Phoenix Smart Charger 12/50 (1+1) IP43 Integrated Bluetooth module Integrated VE.Direct connections 1x 50a main charging output and 1 further side charging output for starter batteries Automatic voltage compensation adaptive, five -stage loading algorithm Variable constant stress phase Eye all common types of battery Prevention of damage caused by gastroplating thanks Reduced aging through storage with storage mode Lifepo4 also charges and can be connected to a BMS via optocoupler Fully programmable loading algorithm Remote on/off can be used as a power source Technical features of the Phoenix Smart 12/30 (1+1) Victron part number: PSC125051085 Number of batteries: 1 + 1 (1 main output with full power + 1x starter battery (max. 3a load) Maximum nominal charging current: 50A, battery voltage: 12V High efficiency: 94% Protection class: IP43 (electronic components), IP22 (connection area) You can find more data with the technical data Three integrated technologies for all -round healthy batteries Variable constant voltage phase: always delivers the correct load of charges With a low battery discharge (e.g. a yacht connected to the country current), a short constant voltage phase is chosen to avoid an overload. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. Prevention of damage caused by excessive gastung: Batterysafe mode In order to shorten the loading time, the highest possible charging current was selected together with a high constant voltage. However, in order for an excessive gas development to be avoided towards the end of the constant trump phase, the charger limits the speed of the voltage climb after the gas voltage has been reached (see also the graphics in the brochure). Less maintenance and aging in the resting state of the battery: the storage mode The warehouse mode is always activated if no discharge has been carried out within 24 hours. In storage mode, the loading tension is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) in order to minimize gas development and corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Also perfect for Lifepo4 battery The Phoenix Smart Charger 12/50 (1+1) IP43 can be attached to/off control by connecting a relay or an optocoupler output with an open collector by an Li-ion BMS to a remote-controlled one/output port. Alternatively, voltage and electricity can also be ruled completely via Bluetooth. Ve.direct interface, bluetooth and programmable relay The Phoenix Smart Charger 12/50 (1+1) IP43 from VICTRON is ideal thanks to the VE.Direct port for a wired data connection with a color control panel, a PC or other devices. Also note the VictronConnect app for Android and iOS, which you can use with any smartphone or tablet to be wireless and read out your Phoenix Charger via Bluetooth. Programmable relay can also be programmed via the VE.Direct interface or a Bluetooth-compatible device in order to trigger an alarm or other events. Required accessories Please note that an AC connection cable is required for the connection of the Phoenix Smart Charger 12/50 (1+1) IP43 to the power grid. This is not included. Scope of delivery1x PSC125051085 VICTRON Phoenix Smart Charger 12/50 (1+1) IP43 1x AC cable clamp 1x operating instructions
€410,00
-
Victron Victron Quattro 24/5000/120 24V 230V 4000W Sinus Wander 120a Batterielader
The Quattro 24/5000/120-100/100 from Victron (MPN Qua245021010) is a device combination of 24V 4000W Sinus inverter, a powerful battery loader and transfer switch. It has two switchable alternating stream outputs and 2 alternating current inputs, each equipped with a 100A transfer switch. The Quattro can be connected to two independent alternating current sources: for example to the public power grid and a generator or to two generators. The Quattro automatically connects to the active source.The permanently integrated battery charger does a considerable 120a which can also be fully charged even if the land/network current is available. The 24V Sinus voltage converter built into the Quattro converts its battery current into 230V AC. Thanks to the real sine wave, the electricity quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, 1 lightning -fast 100a transfer switch per alternating current input is installed. Thanks to these switches, countless applications can also be implemented in the network -coupled area. In addition to the Ve.Bus Port, 2 Com ports are also available for system integration, which almost enables limitless networking of the quattro.Extremely flexible thanks to 2 alternating current inputs and 2 alternating current outputsThe main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the Quattro takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only delivers electricity if an alternating current is available on one of the inputs of the Quattro. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output.Essential features of the Quattro 24/5000/120-100/100 4000W continuous output and 8000W peak output, for 24V battery voltage Device combination made of inverter with transfer switch and 120a battery loader delivers the purest 230V sinus voltage and a clean 50Hz frequency 2 AC incoming with an integrated transfer switch/ 2 x 100 A Maximum power can be switched 2 AC exits +1x additional output which only allows the current to consumer when the alternating current input is active. Ve.Bus communication sport ensures extensive possibilities of networking, system integration, configuration and control of the multiplus devices from Victron. Support the three-phase operation (3 equal units of the same model required) Multiplus devices are parallel -switched, up to 6 devices can be connected in parallel and the system performance can therefore be significantly increased if necessary 2x COM ports are available in addition to the Ve.Bus Port, so that there are no longer any limits to the system integration PowerControl function enables working with limited generator performance as well as limited land or network electricity Power assist function enables “increase in performance” by generators and land connection support in the event of can be used as a UPS solution for interruption -free power supply, thanks to the integrated transfer switch with 16A or 50A for network -coupled self -consumption systems that can only be used by the network operator if the battery capacity is no longer sufficient or other programmable events have taken place 3 Separate programmable relays Compatible with numerous Victron tax and display panels very high efficiency and low self -consumption solid performance expansion possibleUp to 6 quattros can be switched in parallel. This results, for example, with six 48/10000/140 units 54 kW/60 kva power or 840 A charging current. Three units can be switched in a three-phase configuration. However, this is not enough: up to 6 sets with three devices can be switched in parallel and you get 162 kW/180 KVA inverter performance and over 2,500 A loading capacity.PowerControl- Working with limited generator performance, limited land or network electricityThe Multiplus is a very powerful battery charger. Therefore, it takes up a lot of electricity from the generator or the land power supply (almost 10A pro 5kva multi at 230 VAC). With the remote control panel Multi Control, the maximum network or generator current can be set. The Multiplus then takes into account other connected alternating current consumers and only uses the electricity for charging, which is still “left”. This prevents the generator or land power connection from being overloaded.Power assist - “performance increase” by generators and land connection supportWith this function, the PowerControl principle receives a new dimension. It enables the quattro to support too weak alternative sources. Load tips often only occur for a limited period of time. In such a case, the Quattro ensures that too weak land electricity or generator output is immediately compensated for by energy from the battery.Backup system: alternating current even in the event of a network failureThe Quattro can be used for both non-mesh-coupled and pv systems coupled in the mesh-coupled PV systems as well as in other alternative energy systems. Software is available for recognizing a network failure.Simple system configurationIf settings have to be changed to a single device, this can be done within a few minutes using a DIP switch setting process.Parallel switched and three-phase systems can be configured with the Ve.Bus Quick Configuret- und Ve.Bus System Configurator software.Monitoring options and controls on siteSeveral options are available: battery teacher, Multi Control Paneel, Ve.net Blue Power Panel, Color Control Panel, smartphone or tablet (Bluetooth Smart), Laptop or Computer (USB or RS232).Monitoring and control from a distance Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and remote monitoring of the Multiplus. In addition, the system data can be saved and viewed free of charge on the VRM (Victron Remote Management) website.Configuration from a distanceIf systems are connected to the Ethernet with a color control panel, you can be accessed and settings can be changed from a distance.Scope of delivery:1x Victron Qua245021010 Quattro 24/5000/120-100/100 Device combination consisting of 24V 4000W Sinus converter + 24V 120A battery loader + 2 alternating current inputs with integrated 100A transfer switches1x operating instructions
€2.272,00
-
Victron Victron Smartshunt IP65 500A/50MV battery maker
The intelligent Smartshunt 500a from Victron Energy is a multifunctional battery engine with which you can display all information about your cell phone or via the VictronConnect app. So you have effortless access to all monitored battery parameters. Among other things, this includes the state of charge, the remaining term, course data and many other data. There is also the possibility to connect the Smartshunt on a GX device, such as a Cerbo-GX or the Color Control GX, and to read out of information from it. The connection is therefore via a VE.Direct cable. The waterproof battery lesser also represents an excellent option for BMV battery monitoring. Especially in systems where battery monitoring is required, but less wiring and disorder is required. About the Smartshunt Multifunctional battery engine Connection via Bluetooth to the VictronConnect app Connection to a GX device Battery monitoring Waterproof according to IP65 Bolts for shunt connections: M10 The following variations are also available: 1000 A 2000 a Why a battery monitoring? Batteries are used in a variety of applications, mostly to store energy for future use. However, the amount of energy actually stored cannot be read directly on the battery. Factors such as sub- or overload, deep discharge, too high charging or discharge flows as well as high ambient temperature can shorten the lifespan of the battery. An advanced battery lesser enables the monitoring of this and provides important feedback to you as a user. This means that suitable measures can be taken if necessary in order to extend the term profitably. The investment in the battery teacher quickly pays off. The VictronConnect app The app is essential for setting up and monitoring! The following options for connection are: Bluetooth USB, via the optional interface Remote-controlled via a GX device and the VRM portal The app is available for the following platforms: Android Apple iOS (USB is not supported, only a connection via Bluetooth is possible) Macos Windows (Bluetooth is not supported, only a connection via USB is possible) You can download the app from the respective app stores or from the Victron product page. Alternatively, a QR code is available. You can also find instructions on VictronConnect in the appendix. Technical data Tension range power supply: 6.5-70V DC Electricity: Input voltage area, additional battery: 6.5-70V DC Battery capacity: 1-9999 Ah Operating temperature range: -40 ° C - +50 ° C Temperature measuring range: -20 ° C - +50 ° C Dimensions: 46 x 120 x 54 mm Protection class IP65 Scope of delivery: 1x Victron Smartshunt 500A/50MV battery maker IP65
€101,00
-
Victron Victron Smartsolar Mppt 100/15 15a 12V 24V solar loader
The SmartSolar 100/15 from Victron Energy (MPN SCC110015060R) is one Mppt Solar Loader With 15a max. Charging current for charging 12V and 24V batteries. In contrast to the Bluesolar 100/15, the Smart version has integrated Bluetooth, which makes buying a Bluetooth dongels superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection.The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 100-15 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch.The most important technical properties at an overview 15a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 220W Nominal PV performance at 24V systems: 440W 15a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 100V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth module Ultra -fast Maximum Power Point TrackingEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %.Intelligent load exitA deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof.Battery Life: Intelligent battery managementIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-acid battery within a few weeks or months.The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery:1x Victron Energy SCC110015060R SmartSolar Mppt 100/15 15a 12V 24V solar Loader1x operating instructions
€76,00
-
Victron Victron Smartsolar Mppt 100/20-48 20a 12V 24V 48V solar loader
The SmartSolar 100/20-48 from Victron Energy (MPN SCC110020160R) is one Mppt Solar Loader With 20A max. Charging current for charging 12V, 24V and 48V batteries. In contrast to the Bluesolar version, the Smart version has integrated Bluetooth, which makes buying a Bluetooth Dongles superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection. The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 100-20 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. The most important technical properties at an overview 20a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 290W Nominal PV performance at 24V systems: 580W Nominal PV performance at 48V systems: 1160W 20a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 100V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth module Ultra -fast Maximum Power Point Tracking Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Intelligent load exit A deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof. Battery Life: Intelligent battery management If the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-saucle battery within a few weeks or months. The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery: 1x Victron Energy SmartSolar Mppt 100/20-48 20a 12V 24V 48V solar Loader1x operating instructions Notice The device shows the print 48V - on the packaging of the device the data sheet of the 48V version is printed on the side. Contrary to this confusing information on the device itself, this is suitable for both 12V and 24V - and now now also for 48V batterys. Until recently, these were still separate devices - one for 12V/24V and one for 48V - these two were now summarized and the printing on the housing and packaging from the 48V version was taken over
€81,00
-
Victron Victron Smartsolar Mppt 100/30 30A 12V 24V solar loader
The Victron Energy SmartSolar Mppt 100/30 30A 12V/24V solar Loader (MPN SCC110030210), is the new version of the Bluesolar 100/30. The smart version differs only in the Blue version, primarily by the permanently integrated Bluetooth communication module. This allows the SmartSolar-Loader Completely monitor and analyze on each app-enabled device. The VICTRON Connect app required for this can be installed free of charge. Optionally, the MPPT Wirbox-M from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 100/30 30A 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport high maximum efficiency of 98% For 12V and 24V systems Integrated Bluetooth module 30a maximum charging current Fully programmable loading algorithms that can later be activated and used manually via a switch on the housing 100V maximum PV empty voltage 440W maximum PV power at 12V, 880W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Day/night-time control and light insulation option More protection compared to the smaller models of the SmartSolar Mppt seriesCompared to the 75/10, 75/15 and 100/15 model, the SmartSolar 100/30 has Mppt Via overheating protection with a switch-off function and automatic recovery after reaching a normal operating temperature.Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 100/30 has some other innovative technologies such as VE.Direct Communication. Options for programming, data in real time and display of the courseModern Apple and Android smartphones, tablets, macbooks and other devices can be used, for example, via the integrated Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Flexible loading algorithmsFully programmable charging algorithm (also note the software page on our website) and eight pre-programmed algorithms that can be used to be outdated via a rotary knob (further details can be found in our manual). Scope of delivery: 1x Victron Energy SCC110030210 SmartSolar Mppt 100/30 30A 12V/24V solar Loader1x operating instructions
€116,00
-
Victron Victron Smartsolar Mppt 100/50 50a 12V/24V solar loader
The Victron Energy SmartSolar Mppt 100/50 50a 12V/24V solar Loader (MPN SCC110050210), is the new version of the Bluesolar 100/50. The smart version differs only in the Blue version, primarily by the permanently integrated Bluetooth communication module. This allows the SmartSolar-Loader Completely monitor and analyze on each app-enabled device. The VICTRON Connect app required for this can be installed free of charge. Optionally, the MPPT Wirbox-M from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 100/50 50a 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport high maximum efficiency of 98% For 12V and 24V systems Integrated Bluetooth module 50a maximum charging current Fully programmable loading algorithms that can later be activated and used manually via a switch on the housing 100V maximum PV empty voltage 700W maximum PV power at 12V, 1400W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Day/night-time control and light insulation option More protection compared to the smaller models of the SmartSolar Mppt seriesCompared to the 75/10, 75/15 and 100/15 model, the SmartSolar 100/30 has Mppt Via overheating protection with a switch-off function and automatic recovery after reaching a normal operating temperature.Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 100/50 has some other innovative technologies such as VE.Direct Communication. Options for programming, data in real time and display of the courseModern Apple and Android smartphones, tablets, macbooks and other devices can be used, for example, via the integrated Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Flexible loading algorithmsFully programmable loading algorithm (also note the software page on our website) and eight pre-programmed algorithms that can be selected using a rotary knob (further details can be found in our manual).Scope of delivery: 1x Victron Energy SCC110050210 SmartSolar Mppt 100/50 50a 12V/24V solar Loader1x operating instructions
€167,00
-
Victron Victron Smartsolar Mppt 150/100-TR loader Ve.can
The SmartSolar Mppt 150/100-TR from Victron Energy (MPN SCC010100210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. The devices of classes 150/45TR to 150/100-TR are also available as a version with MC4 connections on the solar side of the loading control instead of screw clamps. This model also dominates parallel operation with other controls of the same type. Compared to the Bluesolar series, the Bluetooth module is already integrated in the controller at the SmartSolar family, which makes the smart dongle superfluous in this device. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 150/100-TR 100a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/100 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing max. Maximum PV performance: 12V 1450W / 24V 2900W / 48V 5800W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Smart data communication via VE.Direct and lightning-fast Bluetooth module In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 150/100-TR prefers to use and configure, you can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC010100210 SmartSolar Mppt 150/100-TR 12V 24V 36V 48V 70A LoaderOperating instructions
€469,00
-
Victron Victron Smartsolar Mppt 150/35 35a 12V/24V/48V solar loader
The SmartSolar 150/35 Mppt from Victron Energy (SCC115035210) belongs to the latest generation Smarter Solar loader, with integrated Bluetooth for data transmission and configuration via app on the smartphone or tablet. It supports batteries with a voltage of 12V 24V 36V or 48V and is therefore very versatile. The maximum charging current is 35a and uses the latest loading processes. Depending on the system voltage, the controller can use 500W (12V) up to 2000W (48V) efficiently to charge your batteries. In addition, this device also enables the compensation of partial shading and one of the most reliable Mppt Tracker on the market. The option is that Mpptwirbox-m From Victron Energy the ideal addition to your smartsolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 150/35 35a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 35a, 100V maximum PV empty voltage 12V: 500W / 24V: 1000W / 36V: 1500W / 48V: 2000W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option VE-DIRECT Data port for programming, data evaluation in real time and display of the course Modern Apple and Android smartphones, and tablets, for example, can be used via VI VE.Direct with the system monitors GX Color Control, the Venus GX, or the Mppt Control panel. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 150/35 has some other innovative technologies such as Ve.direct Communication. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection Number of charging outputs: 1 Self -consumption in standby: 10 mA Guarantee: 5 years of manufacturer's guarantee 1 Weight: 1.46 kg Manufacturer: Victron Energy Type of charge: Mppt Product type 1: Mppt solar loader Protection class (IP): IP43 (electronic components) IP22 (connection area) Protection functions: Battery reversal, PV rotation, short circuit, overheating Solar module current (max.): 35a Temperature compensation: 12V -16 MV / ¡C, 24V -32MV / ¡C, 68V -32MV / ¡C Ambient temperature: -30 within Scope of delivery1x Victron Energy SCC115035210 SmartSolar Mppt 150/35 12V 24V 36V 48V 35A LoaderOperating instructions
€167,00
-
Victron Victron Smartsolar Mppt 150/45
The SmartSolar Mppt 150/45 by Victron Energy (MPN SCC115045212), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer and processes a whopping 45a solar power and can flexibly work with 12/24/36/48 V batteries. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. The SmartSolar 150/45 is also available as a version with MC4 connections on the solar side of the charge controller instead of screw clamps. This model also dominates parallel operation with other controls of the same type. Compared to the Bluesolar series, the Bluetooth module is already integrated in the controller at the SmartSolar family, which makes the smart dongle superfluous in this device. Optionally, the MPPT Wirbox-L TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 150/45 45a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Nominal charging current 45a, 150V maximum PV empty voltage Maximum PV performance: 12 V 650 W / 24 V 1300 W / 48 V 2600 W Victron Energy Part number (MPN): SCC115045212 Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Integrated VE.direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/45 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart data communication via VE.Direct and lightning -fast Bluetooth Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be configured by many important functions of the Mppt 150/45 SmartSolar reglers. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar 150/45 will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second, which is used with the Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC115045212 SmartSolar Mppt 150/45 12V 24V 36V 48V 45A LoaderOperating instructions
€198,00
-
Victron Victron Smartsolar Mppt 150/70-TR
The SmartSolar Mppt 150/70-TR from Victron Energy (MPN SCC115070210), belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer and processes a rich 70a solar power and can flexibly work with 12/24/36/48 V batteries. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. The SmartSolar 150/70-TR is also available as a version with MC4 connections on the solar side of the charge controller instead of screw clamps. This model also dominates parallel operation with other controls of the same type. Compared to the Bluesolar series, the Bluetooth module is already integrated in the controller at the SmartSolar family, which makes the smart dongle superfluous in this device. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/70-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-L TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 150/70-TR 70a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Nominal charging current 70a, 150V maximum PV empty voltage Maximum PV performance: 12 V 1000 W / 24 V 2000 W / 48 V 4000 W Victron Energy Part number (MPN): SCC115070210 Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/70-TR controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart data communication via VE.Direct and lightning -fast Bluetooth Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be configured by many important functions of the Mppt 150/70-TR SmartSolar reglers. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar 150/70-Tr. Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second, which is used with the Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC115070210 SmartSolar Mppt 150/70-TR 12V 24V 36V 48V 70A LoaderOperating instructions
€347,00
-
Victron Victron Smartsolar Mppt 150/70-TR Ve.CAN LOADEGLER
The SmartSolar Mppt 150/70-TR VICTRON Energy (MPN SCC115070411) belongs to the latest generation Smarter Loader of the Dutch premium manufacturer. The controller processes a whopping 70a solar power and can flexibly work with 12/24/36/48V batteries. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. Ve.can is particularly suitable for systems with several solar charging devices, with it up to 25 controllers can be synchronized. Compared to the Bluesolar series, the Bluetooth module is already integrated in the controller at the SmartSolar family, which makes the smart dongle superfluous in this device. Also new is the optionally available LCD display, which can simply be plugged into the SmartSolar 150/70-TR VE.CAN if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-L TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. About the SmartSolar Mppt 150/70-TR Ve.can ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield Parallel operation with other ve.can regulators Regulatory constant charging voltage and conservation charging voltage Suitable for all AGM, gel, lead acid and lithium batteries Fully programmable charging algorithms Multi-level and adaptive loading algorithm Remote-controlled switching on and off Integrated temperature sensor Programmable relay Optional LCD display available Smart data communication via VE.Direct and lightning-fast Bluetooth module Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to stop, however, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar device will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Technical data Nominal power: 70a Maximum PV empty voltage: 150V high maximum efficiency of 98% Max. Short circuit current: 50A Maximum PV performance: 12V 1000W / 24V 2000W / 48V 4000W Protection class IP 43 (electrical components) and protection class IP 22 (connection area) Weight: 3kg Dimensions: 185 x 250 x 95 mm Scope of delivery1x Victron SCC115070411 SmartSolar Mppt 150/70-TR 70A Loader
€376,00
-
Victron Victron Smartsolar Mppt 150/85-TR loader controller Ve.can
The SmartSolar Mppt 150/85-TR from Victron Energy (MPN SCC115085411), belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. The devices of classes 150/45TR to 150/100-TR are also available as a version with MC4 connections on the solar side of the loading control instead of screw clamps. This model also dominates parallel operation with other controls of the same type. Compared to the Bluesolar series, the Bluetooth module is already integrated in the controller at the SmartSolar family, which makes the smart dongle superfluous in this device. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 150/85-TR 85A 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct & Ve.CAN data communication sport for connection with additional devices with additional devices to the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 85a, 150V maximum PV empty voltage Maximum PV power: 12V 1200W / 24V 2400W / 48V 4900W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart data communication via VE.Direct and lightning-fast Bluetooth module Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar device will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC115085411 SmartSolar Mppt 150/85-TR 12V 24V 36V 48V 85A LoaderOperating instructions
€410,00
-
Victron Victron Smartsolar Mppt 250/100-MC4 loader Ve.CAN
The SmartSolar Mppt 250/100-MC4 from Victron Energy (MPN SCC125110310), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. This model also dominates parallel operation with other controls of the same type. Compared to the SmartSolar 150/XXX series, the 250/XXX series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-MC4 if necessary. The display then provides all important information about the controller. If necessary, the Mppt Wirbox-XL MC4 from Victron Energy The ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/100-MC4 100A 12V 24V 36V 48V Mppt ultra -quick Mppt-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Max. PV performance: 12V 1450W / 24V 2900W / 48V 5800W max. Max. PV input current: 250 volt integrated VE.Direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Mc4acker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/100-MC4 would prefer to use and configure the SmartSolar Control SCC900600010 display. The installation effort is limited to plug in the display to the SmartSolar. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The devices of classes 250/60-MC4 to 250/100-MC4 are also available as a version with MC4 connections on the solar side of the loader control instead of the screw terminals. Scope of delivery1x Victron SCC125110310 SmartSolar Mppt 250/100-MC4 12V 24V 36V 48V 85A Loader1x operating instructions
€975,00 €564,00
-
Victron Victron Smartsolar Mppt 250/100-TR loader Ve.can
The SmartSolar Mppt 250/100-TR from Victron Energy (MPN SCC125110210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. This model also dominates parallel operation with other controls of the same type. Compared to the SmartSolar 150/XXX series, the 250/XXX series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/100-TR 100a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Max. PV performance: 12V 1450W / 24V 2900W / 48V 5800W max. Max. PV input current: 250 volt integrated VE.Direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/100-TR prefer to use and configure, which can retrofit the SmartSolar Control SCC900600010 display. The installation effort is limited to plug in the display to the SmartSolar. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The devices of classes 250/60-TR up to 250/100-TR are also available as a version with MC4 connections on the solar page of the loader instead of the screw clamps. Scope of delivery1x Victron SCC125110210 SmartSolar Mppt 250/100-TR 12V 24V 36V 48V 85A Loader1x operating instructions
€950,00 €555,90
-
Victron Victron Smartsolar Mppt 250/60-TR
The SmartSolar Mppt 250/60-TR from Victron Energy, belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. The controller processes a whopping 60a solar power and can flexibly work with 12/24/36/48 V batteries and that with a maximum PV input voltage of 250V DC. The ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. In addition, this model dominates the parallel operation with other controllers of the same type. Compared to the SmartSolar 150/XX series, the 250/xx series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 250/60-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-L TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/60-TR 60a 12V 24V 48V Mppt Victron Energy Part number: SCC125060210 Max. PV performance: 12 V 860 W / 24 V 1720 W / 48 V 3440 W max. ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation options Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/60-TR prefers to use and configure, you can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second, which is used with the Loader are coupled and thus offers the possibility of communication with additional devices such as the system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The 250/60-TR is also available as a version with MC4 connections on the loader's solar side instead of the screw clamps and this can be found here. Scope of delivery1x Victron SCC125060210 SmartSolar Mppt 250/60-TR 12V 24V 48V 60A Loader1x operating instructions
€376,00
-
Victron Victron Smartsolar Mppt 250/70-TR
The SmartSolar Mppt 250/70-TR from Victron Energy (MPN SCC125070210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. The controller processes a whopping 70a solar power and can flexibly work with 12/24/36/48 V batteries and that with a maximum PV input voltage of 250V DC. The ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. In addition, this model dominates the parallel operation with other controllers of the same type. Compared to the SmartSolar 150/..... series, the 250/.... series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 250/70-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-L TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/70-TR 70a 12V 24V 48V Mppt Victron Energy Part number: SCC125070210 Max. PV performance: 12 V 1000 W / 24 V 2000 W / 48 V 4000 W max. ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation options Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/70-TR prefers to use and configure, which can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second, which is used with the Loader are coupled and thus offers the possibility of communication with additional devices such as the system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC125070210 SmartSolar Mppt 250/70-TR 12V 24V 48V 70A Loader1x operating instructions
€434,00
-
Victron Victron Smartsolar Mppt 250/85-TR loader controller Ve.can
The SmartSolar Mppt 250/85-TR from Victron Energy (MPN SCC125085210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. This model also dominates parallel operation with other controls of the same type. Compared to the SmartSolar 150/..... series, the 250/.... series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/85-TR 85A 12V 24V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Max. PV performance: 12V 1200W / 24V 2400W / 48V 4900W max. Max. PV input current: 250 volt integrated VE.Direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/85-TR prefer to use and configure, which can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The devices of classes 250/60-TR up to 250/100-TR are also available as a version with MC4 connections on the solar page of the loader instead of the screw clamps. Scope of delivery1x Victron SCC125085210 SmartSolar Mppt 250/85-TR 12V 24V 48V 85A Loader1x operating instructions
€498,00
-
Victron Victron Smartsolar Mppt 75/15 15a 12V 24V solar loader
The SmartSolar 75/15 from Victron Energy (MPN SCC075015060R) is one Mppt Solar Loader With 15a max. Charging current for charging 12V and 24V batteries. In contrast to the Bluesolar 75/15, the Smart version has integrated Bluetooth, which makes buying a Bluetooth dongels superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection.The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 75-10/15 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch.The most important technical properties at an overview 15a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 220W Nominal PV performance at 24V systems: 440W 15a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 75V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth modu Ultra -fast Maximum Power Point TrackingEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %.Intelligent load exitA deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof.Battery Life: Intelligent battery managementIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-acid battery within a few weeks or months.The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week. Number of charging outputs: 1 Battery type adjustable: Support of all common battery types Self -consumption in standby: 10mA Guarantee: 5 years Weight: 0.5 kg Manufacturer: Victron Energy Type of charge: Mppt Product type 1: MPPT loader 15a for 12V and 24V batteries with integrated Bluetooth and extensive setting options as well as an intelligent load exit. Protection class (IP): IP43 (electronic components) IP22 (connection area) Protection functions: Battery reolving fuse outdoor, output ceiling closure, overtemp. Solar module current (max.): 15a Ambient temperature: -30 ° C - +60 ° C Scope of delivery:1x Victron Energysc075015060R SmartSolar Mppt 75/15 15a 12V 24V solar Loader1x operating instructions
€61,00
-
Victron Victron Smartsolar Mppt RS 450/100 48V loader
The Mppt RS SmartSolar from Victron Energy (MPN SCC145110410) is a 48V-Solar loader With a PV input voltage of up to 450 VDC and an output of 100a. It is used in network -bound and network -independent solar applications in which maximum battery noise is required. Characteristics With ultra -fast Maximum Power Point Tracking (Mppt) Several independent Mppt-Tracking inputs Isolated PV connections for additional security Tall Mppt-Place Light, efficient and quiet Integrated display and Bluetooth communication PV isolation resistance monitoring for security at higher voltages Ve.can and ve.direct connection E/A compounds Configure and monitor with VictronConnect app or in the VRM portal The integrated BluetoothsMart connection enables quick monitoring or configuration of the settings via app. The integrated 30-day course shows the individual performance of the individual Mppt-Tracker. The app enables the display of e.g. battery voltage and current, PV voltage and current, course data and trends. The VictronConnect app is available for Android, iOS, Windows and MacOS X.If the solar controller is connected to a GX device and the Internet, the Victron Remote Management Portal (VRM) offers access to the full performance of your SmartSolar RSLoader. Additional units switched into series The SmartSolar RSLoader is equipped with Ve.can bus connections. This enables communication with additional SmartSolar RS & VE.CAN Mppt-units. The additional units are simply "chained" with a RJ45 cable. If you are connected, synchronize all individuals Loader Your charging levels. You can also send your data to a GX device (such as the Cerbogx) via the same cable for monitoring. Technical data Battery voltage: 48V Nominal charging current: 100a Max. Charge power: 5.8kw at 57.6V Ladeal gorithm: multi -stage adaptive (adaptable) Max. DC-PV voltage: 450V Mppt-Operating voltage area: 80-450V Number of trackers: 2 Max. PV operating current: 18A pro tracker Protection class: IP21 Dimensions: 440 x 313 x 126 mm Weight: 7.9 kg Scope of delivery: 1x Victron Smartsolar Mppt RS 450/100 48V Loader
€1.004,00
They have 456 from 486 Seen products