2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This evil Pro AC product is a wall-mounted charging station for all electrical vehicles in accordance with standard IEC 61851-1. Installation on the floor is also possible, either attached to a stand or integrated into a housing set. The stand and housing set must be ordered separately. Installation possible inside and outside. The IP protection class is IP55. The IK protection type is IK10.
The operating temperature is between -30 ° C and 45 ° C. The storage temperature is between -40 ° C and 80 ° C. The output type is a T2 socket with flap (T2S), which is attached to the front of the station. All contacts of the T2S socket are silvered to avoid overheating. The nominal output power is 7.4 kW. Provision in phase (1p+n). The nominal charging current is 32 A at 220 V to 240 VAC at a frequency of 50 Hz to 60 Hz. IT compatible with an additional separator in the power supply. The charging station is easy to install and put into operation. Recommended for apartment buildings, vehicle fleets, street or workplace. The dimensions are (b) 317 mm x (h) 529 mm x (t) 153 mm. The product weight is 7.2 kg.
The color is dark gray (RAL 7016). Included are a built-in protection against error-equal power current with 6 MA error equal strom detection (RDC-DD) and a 30 MA fault electricity protection device (RCD) of type A-SI. For safety reasons, an MNX undervoltage trigger is also integrated into the charging station. In addition, the EV ready requirements must be met. In addition, a mid-energy counter with accuracy class 1 is integrated into the charging station. The charging station can be fed by a cable that runs from behind, top or bottom. To charge electric vehicles, access control is carried out by user authentication using RFID or NFC ID. The charging station can also be used freely. The charging process can be started in a time delay. During the loading time, the performance can be limited to ensure service contact and optimize the loading time of all charging stations based on the same feed.
Two Ethernet RJ45 inputs for LAN connection. The parameters are defined with the Esetup app via Bluetooth or Ecostruxure EV Charging Expert. The charging station can be managed in standalone or clustered architecture. The OCPP 1.6 Communication protocol is used to connect to the surveillance device. The available services are CDR, diagnostic options and charging management. The charging station has CE and EV Ready certification.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This regulated ABLM switching power supply (SMPS) delivers DC voltage. It has a nominal input voltage from 100 V to 240 V AC, a nominal output current of 2.5 A at 24 V DC and a nominal output of 60 W. It is ideal for the provision of the DC voltage that is necessary for automation devices for applications in industrial, commercial and private applications such as support, taxes, food and drinks, mining, oil and gas and water. It is installed on an Omega rail or attached with a screw. It is 53 mm wide, 91 mm high and 55.6 mm deep. It offers protection against overloads and short circuits with automatic restart after the overload/short circuit source has been remedied. It weighs 0.221 kg. It is a power supply for industrial use for rail mounting. It corresponds to the standards EN62368-1, Enienc610-1/2-201, Enienc61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL61010-2-201/-201, CSAC22.2NO61010-2-201/NO61010-1 And is CE certified, Cul-Listed/recognized, RCM, CBScheme. The miniature performance switches of the ACTI9 IC60 series are recommended for your protection. The type of protection is 6 A, C curve or 10 A, B curve. On the front there is an LED that shows the presence of DC output voltage, as well as a QR code for access to the latest technical documentation. Thanks to your modular housing, you can either be installed in housings or industrial panels by clamping on an omega rail (DIN). They supply their automated systems with energy. The modular power supplies designed for simple machines and applications are primarily valued for their extreme compactness.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This regulated ABLM switching power supply (SMPS) delivers DC voltage. It has a nominal entrance from 100V to 240V AC, a nominal output current of 2.5A at 24V DC and a nominal output power of 60W. It is ideal for supplying DC voltage that is required for automation devices in industrial, commercial and private applications such as funding, packaging, control, food and drink technology, mining, oil and gas industry as well as water management. It is mounted on an omega rail or attached with a screw. Its width is 53mm, its height 91mm, its depth 55.6mm. It ensures protection against overload and short circuit with automatic re-accumulation after removing the overload/short circuit source. It weighs 0.221 kg. It is a power supply for industrial use, for rail mounting. It corresponds to the standards EN62368-1, Enienc610-1/2-201, Enienc61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL61010-2-201/-201, CSAC22.2NO61010-2-201/NO61010-1 And is certified according to CE, CUL Listed/Recognized, RCM, CBScheme. The Acti9 IC60 series of line protection switches is recommended for your protection. The type of protection is 6a, C-curve or 10a, B curve. On the front there is an LED, which indicates the presence of the output tension, as well as a QR code for access to the current technical documentation. Thanks to your modular housing, you can either be installed in cupboards or industrial boards by clamping on an omega rail (DIN). They bring energy into their automated systems. The modular power supplies are designed for simple machines and applications and are primarily valued for their extreme compactness.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This product is part of the modicon networking range, an offer from Modicon Standard Unmanaged Switch. This unmanaged switch is delivered with Ethernet TCP/IP protocol. It has 8 transmission connections for copper cables. It offers simple connectivity for several Ethernet devices and gives customers more options for industrial applications. This product works with a power consumption of 1.5 W and a nominal voltage of 12 to 24 V DC. It has a removable 3-pin power supply connector. The dimensions are 38 mm (width) x 102 mm (height) x 79 mm (depth). The weight is 0.150 kg. The product has shielded connections that are suitable for small, isolated networks or systems with light network traffic and networking with low complexity. CE, UL, RCM, UKCA and EAC-certified and corresponds to the standards UL 61010 and EN/IEC 61131. Installation on a symmetrical DIN rail. Low power consumption and compact floor space. Simple connectivity for several Ethernet devices. The Modicon Networking series offers you an intelligent, flexible way to integrate Ethernet solutions into your company, from the device level to the control network to your company network.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
The PowerLogic PM5320 is a universal counter for front installation (96 mm x 96 mm) with a fully graphic, backlit LCD display. The meter with the accuracy class 0.5s (according to IEC 62053-22) measures energy, activity and blind power, voltage, electricity, frequency, performance factor and enables up to 31 upper vibrations. It is suitable for 50 Hz or 60 Hz applications and supply voltages in the range from 100 to 415 VAC and 125 to 250 VDC. Universal measurement for three-phase converter measurement of three or four-conductor rotary power networks via electricity converter (secondary 1 a or 5 a) and direct measurement up to 690 V AC or medium-voltage applications via voltage converter. The measurement voltage range between the phases is 35 to 690 V AC at 47 to 63 Hz, the measuring range between phase and neutral conductor 20 to 400 V AC at 47 to 63 Hz. Communication is via Ethernet (Modbus TCP, BACNET/IP, Ethernet/IP), there are also 2 configurable digital inputs and 2 configurable transistor outlets. The data is read via dynamic QR code displays. There are 35 configurable alarms and 15min load profile recording for 2 measurement sizes (e.g. kWh and KVAH) for 60 days. The product dimensions are width 96 mm, depth 72 mm, height 96 mm and weight 380 g.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
The Shelly Pro 3EM is a precise 3-phase power consumption measuring device that is simply connected via WLAN, LAN or Bluetooth. With an impressive measurement accuracy of 1%, it monitors the energy consumption of all of your household and work equipment individually, which enables you to control and optimize this data for up to 60 days, with detailed measured values being delivered every minute. In contrast to the Shelly 3em, the Pro An intelligent scripting function, has extended data and control functions and an improved firmware platform. Furthermore, the electricity meter can calculate the flow of energy in both directions - produced and consumed energy for each of the 3 phases. It also shows you the quality of your power grid by providing values for real power, blind power, tension and performance factor.
The highlights of the Pro 3em
WLAN, LAN and Bluetoth
Two-way energy consumption monitoring
Scripting function
4-quadrant measurement (energy loss acquisition)
To 1% precise measurement
Modbus support
Electricity monitoring and control
Accuracy class B (work energy)
Internal temperature sensor
4 converter inputs
Including 3x current converter 120a
Assembly: DIN rail
Two-way energy consumption monitoring
The Pro 3EM helps you to avoid unnecessary expenses and voltage waste that could damage your devices. It calculates both the produced and the energy used for each of the three phases and can monitor three separate circuits in a single -phase system. In addition, it shows you the quality of your power grid. Including acting, blind power, voltage and performance factor. So you have an overview and effectively protects your technology.
Intelligent control for your home
With the scripting functionalities and web hooks of the electricity meter, you can easily control other Shelly or WLAN devices in your local network. Use these functions to set precise settings for heating, cooling or loading your electric car based on your PV production. Your devices are automatically separated from electricity consumption and smarter manages - without a cloud connection. This is how you reduce costs, save energy and effortlessly optimize your everyday life.
Industrial institution
The Shelly supports MODBUS for precisely recording tension, electricity, power and energy consumption. You will receive precise measured values and current values to optimally monitor your energy consumption. Thanks to the firmware platform, you can make individual adjustments and send all 100ms current data to your infrastructure. So you keep an overview and benefit from a smart energy control.
Solar panels and your system at a glance
With the electricity meter you can easily follow how much energy your solar modules generate. It provides you with real -time information in your system, as well as historical data to create and consumed energy. So you keep an eye on the energy flow and maximize the performance of your PV system.
First class security for your smart energy network
The Shelly offers security through MTLs for MQTT, HTTP and safe webockets. This means that you can connect directly and safely to your cloud infrastructure without having to set up expensive and complex networks or VPN`s. So your energy network not only becomes smarter, but also more secure and cost -efficient.
Full harmony and match
Shelly devices are compatible with Alexa, Google Home, Android and iOS. So you can easily control everything by voice command. To do this, download the Shelly Smart Control app in the App Store or Google Play.
Technical data
Voltage supply: 110-240V AC
Frequency: 50/60Hz
Ambient temperature: -20 ° C - +40 ° C
Air humidity: 30-70% relative humidity
Voltage meter (RMS for each phase): 100-260V
Electricity measuring devices (RMS via CT for each phase): 0-120a
Frequency band: 2.4 MHz
Max. HF performance:
WLAN protocol: Wi-Fi 802. 11 B/g/h
Electrical consumption:
WLAN reach inside: up to 30m
WLAN reach outside: up to 50m
Weight: 0.62 kg
Dimensions: 94 x 19 x 69 mm
Scope of delivery:
1x shelly Pro 3M Smarter 3-phases of electricity meters3x CT120 power converter
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
The SMA 1PH EV Charger 7.4 is a charger for electric vehicles. It can easily be integrated into existing PV systems and installed in new systems. The charger is inexpensive, has a PV boost and overload protection. Together with the Sunny Home Manager 2.0 and the Energy app, there are many ways to set up the system as desired.
Cost effectiveness
Conventional chargers do not use small solar capacities, for example in the early morning and evening hours. This is due to the standardized minimum charge capacity of electric vehicles. This charger optimizes the use of this energy of only 1.3 kW.
PV Boost
With a combination of network and solar energy, the SMA 1PH EV Charger 7.4 kW loads up to 7.4 kW, which is almost twice as fast as with conventional charging stations.
Overvoltage protection
This safety function protects the main house connection from overload. If several appliances are operated at the same time, this may exceed the amount that can process your connection, which overloads the system. The safety in this charger adapts the charging capacity dynamically to the maximum available level.
Integration with SMA Energy
System owners have all relevant information at any time. Current information on the charging process and maximum control by configuring the loading mode. With the SMA 1PH EV Charger 7.4 you can, for example, give preference to certain devices in front of others or set a time up to which your car should be charged, and the process is started automatically.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
The SMA 3PH EV Charger 22 is a charger for electric vehicles. It can easily be integrated into existing PV systems and installed in new systems. The charger is inexpensive, has a PV boost, automatic phase switching and overload protection. Together with the Sunny Home Manager 2.0 and the Energy app, there are many ways to set up the system as desired.
Cost effectiveness
Conventional chargers do not use small solar capacities, for example in the early morning and evening hours. This is due to the standardized minimum charge capacity of electric vehicles. This charger optimizes the use of this energy of only 1.3 kW.
PV Boost
The SMA 3PH EV charger 22 uses a combination of network and solar energy to charge up to 7.4 kW, which is almost twice as fast as with conventional charging stations.
Automatic phase switch
This switching enables maximum use of the available service by starting up to 7.4 kW with a single -phase load and then switching to three -phase charging for larger solar capacities.
Overvoltage protection
This safety function protects the main house connection from overload. If several appliances are operated at the same time, this may exceed the amount that can process your connection, which overloads the system. The safety in this charger adapts the charging capacity dynamically to the maximum available level.
Integration with SMA Energy
System owners have all relevant information at any time. Current information on the charging process and maximum control by configuring the loading mode. With the SMA 3PH EV charger 22, for example, you can give certain devices in front of others or set a time up to which your car should be charged, and the process is started automatically.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA energy measuring device
Specifications:
Fast and easy installation
Universal reading of the measured values
Graphical visualization of the current measured values in the Sunny Portal
Use of standard Ethernet cables for Speedwire Communication
Universal uses regardless of existing energy meters
Simple connection to SMA Smart Home System Components
Three -phase reading of the measured values for efficient energy management
The SMA Energy meters is a powerful measuring device for intelligent energy management in SMA Smart Home, which, like a counter, records phase -accurate and balanced measurements for the electricity covered from the network. It transmits these values via Speedwire. All data about the generated photovoltaic energy, the purchased electricity and the powered energy can be transferred via a standard Ethernet cable, for example to the Sunny Home Manager or in the future to the Sunny Boy Smart Energy. This enables optimal energy monitoring, efficient load and battery management as well as reliable reliable reduction in the network at the network connection point, taking into account self-consumption.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA Energy meter is energy meter and data logger in one.This device optimizes communication, monitoring and control of solar modules, solar power storage systems and generators. This intuitive device significantly makes configuration and commissioning of inverter considerably easier. It is suitable for 50 Hertz and 60-Hertz operations for one- and three-phase connections. It can be installed at the switch or in the fuse box.
The parameters of installations and inverters can be adapted from afar thanks to the new Sunny Portal. The portal system is activated by Ennexos and is free of charge if the energy meter is registered within the first 6 months after purchase.
The SMA Energy Meter also supports inverter from other manufacturers if the inverters have the SunSpec Modbus / TCP interface. Incidentally, the Emeter-20 is compatible with the EMter-30.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA STP 10.0-3AV-40, 3-phase
Product specification:
Storage system: Na
Nominal output: 10,000 VA
MPPT number: 2
MPP-MINDESTSTUNG: 320V
Maximum MPP voltage: 800 V
DC connection: Sunclix
Dimensions: 176 mm x 470 mm x 435 mm
Weight: 20.5 kg
SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA Sunny Tripower 10.0 Smart Energy STP10.0-3SE
Product specification:
Storage system: Hybrid-WR
Nominal output: 10,000 VA
MPPT number: 2
MPP-MINDESTSTUNG: 280V
Maximum MPP voltage: 800 V
DC connection: Sunclix
Dimensions: 173 mm x 500 mm x 598 mm
Weight: 31 kg
SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA STP 5.0-3AV-40, 3-phase
Product specification:
Storage system: Na
Nominal output: 5000 VA
MPPT number: 2
MPP voltage min.: 215V
Maximum MPP voltage: 800 V
DC connection: Sunclix
Dimensions: 176 mm x 470 mm x 435 mm
Weight: 17 kg
SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA Sunny Tripower 5.0 Smart Energy STP5.0-3SE
Product specification:
Storage system: Hybrid-WR
Nominal output: 5000 VA
MPPT number: 2
MPP-Mindest voltage: 210V
Maximum MPP voltage: 800 V
DC connection: Sunclix
Dimensions: 173 mm x 500 mm x 598 mm
Weight: 31 kg
SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA STP 6.0-3AV-40, 3-phase
Product specification:
Storage system: Na
Nominal output: 6000 VA
MPPT number: 2
MPP-MindestStlung: 260V
Maximum MPP voltage: 800 V
DC connection: Sunclix
Dimensions: 176 mm x 470 mm x 435 mm
Weight: 17 kg
SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA Sunny Tripower 6.0 Smart Energy STP6.0-3SE
Product specification:
Storage system: Hybrid-WR Nominal output: 6000 VA MPPT number: 2 MPP-MINDESTSTUNG: 250V Maximum MPP voltage: 800 V DC connection: Sunclix Dimensions: 173 mm x 500 mm x 598 mm Weight: 31 kg
SMA is one of the world's leading manufacturers of inverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA STP 8.0-3AV-40, 3-phase
Product specification:
Storage system: Na
Nominal output: 8000 VA
MPPT number: 2
MPP-MindestStlung: 260V
Maximum MPP voltage: 800 V
DC connection: Sunclix
Dimensions: 176 mm x 470 mm x 435 mm
Weight: 20.5 kg
SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA Sunny Tripower 8.0 Smart Energy STP8.0-3SE
Product specification:
Storage system: Hybrid-WR
Nominal output: 8000 VA
MPPT number: 2
MPP-MINDESTSTUNG: 330V
Maximum MPP voltage: 800 V
DC connection: Sunclix
Dimensions: 173 mm x 500 mm x 598 mm
Weight: 31 kg
SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
The Sunny Tripower Core1 is the world's first free string inverter for decentralized roof and open space systems as well as covered parking spaces. The Core1 is the 3rd generation of the successful Sunny Tripower product line and revolutionizes the world of commercial inverter with its innovative concept. SMA engineers' stipulation was to combine a unique design and an innovative installation method in order to significantly increase the installation speed and to achieve an optimal return on investment for all target groups. From delivery to installation to operation, the Sunny Tripower Core1 enables comprehensive cost savings in logistics, workload, material and service. From now on, commercial PV installations are faster, safer and easier to realize than ever.
Inexpensive
Stand device with the lowest assembly effort
No DC fuses required
Integrated DC separation switch
Consistently integrated
Integrated WiFi access with any mobile device
12 direct string inputs reduce work and material expenditure
AC/DC overvoltage protection (optional) • Argalbow protection function (AFCI)
Shortest installation time
Fast network connection through simple inverter configuration and commissioning
Optimally accessible connection areas
Maximum yields
• Up to 150 % oversized PV generator
Increased income without assembly effort through integrated shading management SMA Shadefix
Technical features
MPP voltage area
500 - 800 V
Idle voltage
1,000 V
Max. pro MPP tracker
120 a
Number d. MPP tracker
6
AC
50,000 W
Number d. Pie rabbits
3
dimension
569 x 733 x 621 mm
Guarantee / warranty
guarantee
5 years of manufacturer's guarantee
- Note: The maximum guarantee period 15
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA Sunny Home Manager 2.0
Offers a complete solution for energy monitoring and energy management. The new Sunny Home Manager 2.0 contains an integrated measuring device, so that for standard applications with performance measurement at the network connection point, a separate SMA Energy meter is no longer required.
Product advantages:
SMA Energy Meter and Home Manager in one device
Weather forecasts for consumer control and battery charge
Communication with the SMA Sunny Portal
Control of receivers
Charging with a charger
Product features:
Assembly on a supporting rail with 4th
3-phase measurement up to 63a
Trafom measurement with 5a output current
Commissioning via SMA Sunny Portal
Weight: 0.3 kg
A maximum of 24 devices can be connected to a Sunny Home Manager. The number of controlled components (radio sockets, heat pump or Mennekes Wallbox) must not exceed 12 devices.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA Sunny Tripower X 12 StP 12-50
Product specifications:
Storage system: Na
Nominal output: 12000 VA
Number of MPPT: 3
MPP-Minimal voltage: 206V
Mpp max. Voltage: 800V
DC connection: Sunclix
Dimensions: 266mm x 728mm x 762mm
Weight: 35kg
SMA Is one of the world's leading providers of inverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer support. The manufacturer of quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. In 35 years of experience, SMA has significantly shaped the development of renewable energies and continuously expands this competence.
The SMA manufacturer's guarantee for these products is automatically extended to 10 years from the commissioning of the product or invoice date for the first warranty receiver if the warranty receiver registered the product within 12 months of the start of the product or invoice date for the first guarantee receiver on the SMA websitewww.my.sma-service.com/S/Product Registration) and the commissioning of the product or the invoice date for the first warranty receiver after April 1, 2021. (only applies to Spain, Poland, the Netherlands, Belgium and Luxembourg) or October 1, 2021 (worldwide). The product can be approved worldwide from May 1, 2021 in Spain and from October 1, 2021. The acquisition of the Active/Comfort guarantee extension after the SMA manufacturer's guarantee of 5 years (without product registration) is not possible for these products. Only in the event of proper product registration and the associated extension of the SMA manufacturer's guarantee to 10 years can the warranty receiver acquire the optional Active/ Comfort guarantee extension according to the conditions of Active/ Comfort guarantee extension for the years 11 - 20 of the products. The option of purchasing the Flex Garantia extension according to the conditions of the Flex Garantia extension is still available to the warranty receiver by the year 10 from the commissioning of the product or invoicing the first guarantee recipient. SMA expressly reserves the right to grant the customer the Active/Comfort/Flex guarantee extension after a first check of the device to be insured.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA Sunny Tripower X 15 StP 15-50
Product specification:
Storage system: Na
Nominal output: 15000 VA
MPPT number: 3
MPP mini tension: 257V
MPP maximum voltage: 800V
DC connection: Sunclix
Dimensions: 266mm x 728mm x 762mm
Weight: 35kg
SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has significantly shaped the development of renewable energies and continuously expands this competence.
The SMA manufacturer's guarantee for these products automatically extends to 10 years from the product introduction or invoice date for the first warranty receiver if the warranty receiver registered the product within 12 months of the product introduction or invoice date for the first guarantee receiver on the SMA website (www.my.sma-service.com/S/Product Registration) and the product launch or the invoice date for the first guarantee receiver after April 1, 2021. (only applies to Spain, Poland, the Netherlands, Belgium and Luxembourg) or October 1, 2021 (worldwide). The product can be registered in Spain from May 1, 2021 and worldwide from October 1, 2021. The acquisition of the Active/Comfort guarantee extension after the SMA manufacturer's guarantee of 5 years (without product registration) is not possible for these products. Only in the event of proper product registration and the associated extension of the SMA manufacturer's guarantee to 10 years can the guarantee beer acquire the optional Active/ Comfort warranty extension in accordance with the conditions of Active/ Comfort guarantee extension for the years 11 - 20 of the products. The option of acquiring the Flex guarantee extension in accordance with the conditions of the Flex guarantee extension is still available to the warrantyer up to 10 years after commissioning or invoicing to the first guarantee. SMA expressly reserves the right to grant the Active/Comfort/Flex extension guarantee to the customer after the first check of the device to be covered.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA Sunny Tripower X 20 StP 25-50
Product specifications:
Storage system: Na
Nominal output: 20,000 VA
Number of MPPT: 3
MPP-Minimal voltage: 340V
Mpp max. Voltage: 800V
DC connection: Sunclix
Dimensions: 266mm x 728mm x 762mm
Weight: 35kg
SMA Is one of the world's leading providers of inverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer support. The manufacturer of quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. In 35 years of experience, SMA has significantly shaped the development of renewable energies and continuously expands this competence.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA Sunny Tripower X 25 STP 25-50
Product specifications:
Storage system: Na
Nominal output: 25000 VA
Number of MPPT: 3
MPP mini tension: 430V
Mpp max. Voltage: 800V
DC connection: Sunclix
Dimensions: 266mm x 728mm x 762mm
Weight: 35kg
SMA Is one of the world's leading providers of inverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer support. The manufacturer of quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. In 35 years of experience, SMA has significantly shaped the development of renewable energies and continuously expands this competence.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
