Description
This evil Pro AC product is a wall-mounted charging station for all electrical vehicles in accordance with standard IEC 61851-1. Installation on the floor is also possible, either attached to a stand or integrated into a housing set. The stand and housing set must be ordered separately. Installation possible inside and outside. The IP protection class is IP55. The IK protection type is IK10.
The operating temperature is between -30 ° C and 45 ° C. The storage temperature is between -40 ° C and 80 ° C. The output type is a T2 socket with flap (T2S), which is attached to the front of the station. All contacts of the T2S socket are silvered to avoid overheating. The nominal output power is 7.4 kW. Provision in phase (1p+n). The nominal charging current is 32 A at 220 V to 240 VAC at a frequency of 50 Hz to 60 Hz. IT compatible with an additional separator in the power supply. The charging station is easy to install and put into operation. Recommended for apartment buildings, vehicle fleets, street or workplace. The dimensions are (b) 317 mm x (h) 529 mm x (t) 153 mm. The product weight is 7.2 kg.
The color is dark gray (RAL 7016). Included are a built-in protection against error-equal power current with 6 MA error equal strom detection (RDC-DD) and a 30 MA fault electricity protection device (RCD) of type A-SI. For safety reasons, an MNX undervoltage trigger is also integrated into the charging station. In addition, the EV ready requirements must be met. In addition, a mid-energy counter with accuracy class 1 is integrated into the charging station. The charging station can be fed by a cable that runs from behind, top or bottom. To charge electric vehicles, access control is carried out by user authentication using RFID or NFC ID. The charging station can also be used freely. The charging process can be started in a time delay. During the loading time, the performance can be limited to ensure service contact and optimize the loading time of all charging stations based on the same feed.
Two Ethernet RJ45 inputs for LAN connection. The parameters are defined with the Esetup app via Bluetooth or Ecostruxure EV Charging Expert. The charging station can be managed in standalone or clustered architecture. The OCPP 1.6 Communication protocol is used to connect to the surveillance device. The available services are CDR, diagnostic options and charging management. The charging station has CE and EV Ready certification.
