Products
-
Trina Solar Trina Vertex S+ TSM-445NEG9RC.27 445 WP Glass/Glass Module Bifacial
The Trina Solar Vertex S+ 445 WP is a bifacial high-performance module that convinces with the latest technology and an elegant glass and glass construction. With a peak output of 445 WP and a module efficiency of 22.3 %, this module is an optimal solution for private and commercial roof systems. Thanks to the Bifacial N-Type I-Topcon cell technology The module also generates energy on the back, which significantly increases the overall efficiency. Bifacial technology:Due to bifacial cell technology, this can Trina Solar Vertex S+ 445 WP Not only on the front, but also on the back produce energy from an incident light. This can be the overall output by up to 10% Increase, depending on the installation and the ambient conditions. The bifaciality factor is included Up to 80%, which means that the back captures the back particularly effectively and further optimizes the power. Main features: Top performance of 445 WP With a module efficiency of 22.3 %, combined with bifacial technology for additional performance from the back. Bifaciality factor up to 80 %: Use light reflections on the back for up to 25 % higher energy generation. N-Type technology: Low degradation-only 1 % in the first year and 0.4 % in the years 2-30, which ensures long-term high performance. Excellent resistance: Withstands snow loads of up to 5.4 kpa and wind loads of up to 4 kpa, which makes the module particularly resistant to extreme weather conditions. Double glass technology: Improved fire resistance, longer lifespan and better recyclability compared to conventional glass film modules. Technical details: Modular type: Glass glass with a bifacial back (transparent) Nominal output (STC): 445 WP Efficiency: 22,3% Bifaciality factor: up to 10 % Glass front: 1.6 mm highly transparent, anti-reflex-coated, heat-prone glass Glass back: 1.6 mm highly transparent, anti-reflex-coated, heat-prone glass Frame: Stable, anodized black aluminum frame Connector: MC4 Evo2 Dimensions (L x W x H): 1762 mm x 1134 mm x 30 mm Weight: 21.0 kg Product guarantee: 25 years Performance guarantee: 30 years of linear guarantee EAN/MPN/GTin: 4262492210299 The Trina Solar Vertex S+ 445 WP Bifacial is the ideal choice for modern photovoltaic systems that require both high efficiency and sustainability. Thanks to the bifacial technology, the full potential of solar radiation is used, and the robust glass and glass construction ensures maximum durability. Order now and benefit from maximum energy yield and modern design!
€95,00
-
TRINNITY Trinity BW 50L buffer memory (TRGPWBW050)
The buffer memory Trinity BW are determined for collecting, storing and transporting excess heating water or other liquids that are approved for contact with steel and come from different heat sources: central heating boilers, solar collectors, heat pumps, etc. Buffer storage protect the central heating system. - You take over the difference between the heating capacity of the boiler and the output handed over to the heating system. They are made of black sheet steel. The thermal insulation of the buffer tank consists of a 25 mm thick polystyrene foam layer. The thermal insulation is covered with a coat made of thin sheet steel, which is coated with powder color, and the upper and lower cover is made of ABS plastic. The tanks are pressure devices that are suitable for operation in a vertical position with a maximum water pressure of 0.3 MPa (3 bar). Technical data: Nominal pressure - 3 Temperature - 80 ° C Thickness of the insulation [mm] - 25mm Material - black sheet steel White color without coil
€426,35
-
Twin 5 Plus Twin 5 Plus Cam, 20a, RFID, E-Flux, LB Standard, Direct Payment
Twin 5 Plus Is Alfens the leading EV charging station for business and public users and sets a new standard in terms of loading efficiency and technology integration by fully implementing the AFIR regulation. Users benefit from the convenience of direct payment via dynamic QR codes and transparent, immediate prices that are displayed on a light, full-colored LED screen to facilitate access and easy charging. Prepared for the requirements of modern infrastructures, the Twin 5 Plus is equipped with ISO 15118 communication skills and ready for bidirectional electricity transmission to meet current technology needs and to make itself future-proof for future innovations in the area of EV charging. Pre -installed This Twin 5 Plus EV charging station is pre-installed with RFID, Backoffice E-Flux, standard load compensation and the direct payment option via dynamic QR codes. Integrated protection The twin is equipped with all the necessary protective functions. The integrated network connection box adds all necessary protective functions, usually in the external infrastructure and save costs during installation. Cyber security With its new platform, Alfen is a pioneer in terms of cyber security that uses a secure-by-design strategy and is ISO 27001-certified. Intelligent shop With its fully renewed software and hardware, the Twin supports various functions such as OCPP 2.0.1, load compensation, smart charging network, ISO 15118 and bidirectional charging (V2G). User -friendliness The clear symbols and the integrated card reader make the Twin a user -friendly charging station. Starting and stopping charging sessions is easy. His intelligent functions such as energy billing and security assistance are invisible to the user. Public charging station Due to its robust construction and user-friendliness, the Twin is a frequently found charging station in business and public locations and thus one of the most popular charging points for public locations. Easy configuration Connect the Twin to a laptop during the installation and enter your preferred configuration settings with our free service installation configuration software.
€6.848,00
-
Twin 5 Plus Twin 5 Plus Cam, 32a, RFID, E-Flux, Direct Payment
Twin 5 Plus is Alfens first-class EV charger for business and public users. This model sets a new standard in load capacity and technology integration and fully supports AFIR regulation. Users benefit from the convenience of direct payment via dynamic QR codes and transparent prices displayed in advance on a bright full color-LED screen for easy access and uncomplicated charging. Prepared for the requirements of modern infrastructures, the Twin 5 Plus has ISO 15118 communication skills and is designed for bidirectional performance transmission. In this way, the public charger meets the current technological requirements and is future-proof and adapts to the next innovation spaces in the area of EV load. Pre -configured This Twin 5 Plus EV charger is configured in advance with RFID, BackOffice E-Flux and Direct payment option via dynamic QR codes. Direct payment The Twin 5 Plus is ready for AFIR regulation, so that users can benefit from the convenience of direct payment via dynamic QR codes. Integrated protection The twin is equipped with all the necessary protective functions. The integrated network connection box adds all protective functions that are usually necessary in the external infrastructure and help you save money during installation. Cyber security With the new platform, Alfen is a leader in cyber security. You use a security strategy based on the "Security through Design" and are certified according to ISO 27001. Intelligent shop With its fully renewed software and hardware, the Twin supports various functions such as OCPP 2.0.1, load compensation, smart charging network, ISO 15118 and bidirectional charging (V2G). User -friendliness The clear symbols and the integrated card reader make the twin a user -friendly charging point. Starting and stopping charging sessions is easy. His intelligent functions such as energy billing and ensuring security are invisible to the user. Public charging point The twin is a charging point that can often be found in business and public locations. Its robust construction and user -friendliness make it one of the most popular charging points for public locations. Easy configuration Connect the Twin to a laptop during the installation and enter your preferred configuration settings with our free service installation configuration software.
€6.727,00
-
Van der Valk Solar Systems Van der Valk Solar Systems Valkbox 3 XL flat roof assembly set
Valkbox3 fastening system for flat roof mounting up to module width 1150 mm The fastening system was specially developed for flat roofs and consists of high -quality components. The individual element allows the assembly of a solar module and is very easy to attach. Those who have to install their modules on a roof with many obstacles will very much appreciate the sophisticated construction. The system is delivered as a directly assembly kit, which leads to shorter structure. Delivery as a kit that is directly possible for assembly Inclusion angle of 17 degrees Fast assembly thanks to the pre -assembly of essential components Note: Ballasting not included in the scope of delivery - e.g. sidewalk panels (30 x 30cm; 40 x 40cm) are suitable for e.g. Technical data: For a module in cross -mounting up to module width 1150 mm Inclusion angle of 17 degrees Developed in accordance with European standards Suitable for panel dimensions: length approx. 2280mm, width a maximum of 1150mm Scope of delivery: Montage set for a (1) solar module 2 x aluminum-StÜtzen4 x connectors5 x screws short5 x screws long9 x nuts3 x cable holder4 x rubber documents
€49,50
-
Victron Victron AGM 12V 170AH Super Cycle Battery C20
The 12V 170AH Super Cycle Battery Victron Energy (MPN BAT412117081) is based on the latest findings from the electrochemistry of batteries and thus offers significantly more cycles and a high resistance to deep discharge. The use of a super cycle battery is recommended if an occasional discharge is 100% (deep discharge) or more frequent discharge to 60-80%. Truly innovative: the Victron AGM 12V 170AH Victrons AGM Super Cycle Batteries contain the latest innovations from current further developments in the electrochemistry of batteries. The paste on the positive plates does not become so soft, even if the battery has been discharged 100% several times. In addition, the battery of the battery was supplemented by a few additives that significantly reduce sulfating in the event of a deep discharge. The bottom line Ultra Deep cycle batteries through these technical innovations significantly more cycles and therefore achieve a older age. Characteristics of the Victron 12V 170AH Super Deep Cycle AGM battery Victron part number: BAT412117081 Battery tension: 12V Battery capacity: 170AH Productive, even after three hundred 100%deep discharge Lifespan at 20 ° C 7-12 years Cycles at 20 ° C and 40% discharge: 1000 Cycles at 20 ° C and 60% discharge: 700 Cycles at 20 ° C and 80% discharge: 500 Cycles at 20 ° C and 100% discharge: 300 low inner resistance Smaller and lighter than conventional deep cycle batteries Very good tolerance of high -stream discharge Weight: 45 kg, dimensions (BXLXH): 17.2 x 33.6 x 28 cm Exceptional performance with repeated deep discharge Test have shown that the Super Cycle Battery is still powerful even after at least three hundred 100 %deep discharges. In the test, the batteries were discharged daily to 10.8 V with i = 0.2 C20. Then they were left in the unloaded state for two hours and then charged again with i = 0.2 C20. Most batteries are damaged if they are left 100 times for two hours in the discharged condition, but not the Victron 12V 170AH Super Cycle Battery. Super cycle batteries: smaller and lighter Another advantage of the new chemical composition is that the batteries are smaller compared to our previous low cycle AGM batteries and weigh less. Typical areas of application of the Applications with high-stream discharge, for example solar systems with inverter on the solar battery Applications where there can be complete deep discharge from time to time or more frequent discharge up to 60-80% can be expected Perfectly used as a starter battery Drive battery Ray rudder, winds etc. Low self -discharge Thanks to the processing of high-pure materials and lead-calcium grids in the Super Cycle AGM 12V 170AH IIST, ensured that the self-discharge of this battery is particularly low. This prevents the battery from unloading itself too quickly for a long time without charging. Scope of delivery: 1x Victron Energy BAT412117081 AGM 12V 170AH Super Cycle Battery
€480,00
-
Victron Victron AGM 12V 220AH deep cycle battery battery
The AGM 12V 220AH Deep-Cycle Battery from Victron Energy is characterized by high cycle resistance and, due to its low internal resistance, is ideal for applications with high-stream discharge, as is the case, for example, when operating an inverter in a solar system. Features of the Victron 12V 220AH deep cycle AGM battery Victron part number: BAT412201084 Battery tension: 12V Battery capacity: 220ah Lifespan at 20 ° C 7-10 years Cycles at 20 ° C and 30% discharge: 1500 Cycles at 20 ° C and 50% discharge: 600 Cycles at 20 ° C and 80% discharge: 400 low inner resistance Very good tolerance of high -stream discharge Weight: 65 kg, dimensions (BXLXH): 52.2 x 23.8 x 24 cm Typical areas of application of the Applications with high-stream discharge, for example solar systems with inverter on the solar battery Perfectly used as a starter battery Drive battery Ray rudder, winds etc. Low self -discharge Thanks to the processing of high-pure materials and lead-calcium grids in the Victron AGM 12V 220AH battery, it is ensured that the self-discharge of this battery is particularly low. This prevents the battery from unloading itself too quickly for a long time without charging. Perfect contact: with M8 Cycled cable shoe Thanks to the permanently integrated copper cable shoes, the deep cycle battery 12V 220AH offers the best possible contact and thus ensures a perfect current flow, without performance losses due to a poor battery connection. Scope of delivery: 1x Victron Energy BAT412201084 AGM 12V 220AH deep cycle battery
€465,00
-
Victron Victron Blue Smart 12/13 IP67 13A charger 12/230 volts
The Blue Smart IP 67 12/13 12V 230V battery charger from Victron Energy (MPN BPC121313006) is a smart, high-performance battery charger of the latest generation with 13A charging current for charging 12V AGM, gel and lyricic acid batteries as well as lithium ion batteries. In terms of function, the Blue Smart IP67 series is identical to the chargers of the Blue Smart IP 65 and IP 22 device families. Only the application environment for which these chargers are designed differ.Thanks to the integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and electricity, for adapting settings and updating the charger when new functions are available.Important features of the Blue Smart IP67 12/13 13a battery charger Victron part number: BPC121313006 Modeloric drawing: Blue Smart IP 67 12/13 Max. Charging current: 13a For battery voltage: 12V DC For mains voltage: 180-265 VAC 45-65 Hz Completely covered: waterproof, push -in and fire -retardant Smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage loading algorithm extends the life of your batteries thanks to the integrated warehouse mode can be used to supply 12V consumers High quality housing made of cast aluminum Protection against application errors: Polation on battery (fuse), protection against over temperature, protection against the start of the start Completely covered: waterproof, shock -protected and fire -retardantWater, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are covered with resin.One of the highest level of loading effects of all time!Set a new industrial standard: With an efficiency of at least 92 % or more, these chargers produce three to four times less heat.Adaptive 5-stage loading algorithmThe Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. "Bulk" (constant trump phase) "Absorption" (constant voltage phase) "Recondition" (regeneration phase) "Float" (loading tension phase) "Storage" (warehouse mode) Warehouse mode: Less maintenance and aging in the resting state of the batteryThe warehouse mode is always activated if no discharge has been carried out within 24 hours. In storage mode, the loading tension is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) in order to minimize gas development and corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Significant differences to the Blue Smart IP 65 familyThe two device groups differ in the following points: The type of protection, the IP 67 devices have the best possible protection Blue Smart IP 65 Retäte have a 7-stage loading algorithm, in the IP67 it is 5-stated Scope of delivery:1x VICTRON BPC121313006 Blue Smart IP67 12/13 13A 12V 230V Battery charger1x operating instructions1x 1.5m battery connection cable red/black
€134,00
-
Victron Victron Blue Smart 12/7 IP67 12V 230V battery charger
The Blue Smart IP 67 12/7 12v 230V battery charger from Victron Energy (MPN BPC120713006) is a smart, high-performance battery charger of the latest generation with 7A loading current for charging 12V AGM, gel and bleeding batteries as well as lithium ion batteries. In terms of function, the Blue Smart IP67 series is identical to the chargers of the Blue Smart IP 65 and IP 22 device families. Only the application environment for which these chargers are designed differ.Thanks to the integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and electricity, for adapting settings and updating the charger when new functions are available.Important features of the Blue Smart IP67 12/7 Battery charger Victron part number: BPC120713006 Model description: Blue Smart IP 67 12/7 Max. Charging current: 7a For battery voltage: 12V DC For mains voltage: 180-265 VAC 45-65 Hz Completely covered: waterproof, push -in and fire -retardant Smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage loading algorithm extends the life of your batteries thanks to the integrated warehouse mode can be used to supply 12V consumers High quality housing made of cast aluminum Protection against application errors: Polation on battery (fuse), protection against over temperature, protection against the start of the start Completely covered: waterproof, shock -protected and fire -retardantWater, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are covered with resin.One of the highest level of loading effects of all time!Set a new industrial standard: With an efficiency of at least 92 % or more, these chargers produce three to four times less heat.Adaptive 5-stage loading algorithmThe Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. "Bulk" (constant trump phase) "Absorption" (constant voltage phase) "Recondition" (regeneration phase) "Float" (loading tension phase) "Storage" (warehouse mode) Warehouse mode: Less maintenance and aging in the resting state of the batteryThe warehouse mode is always activated if no discharge has been carried out within 24 hours. In storage mode, the loading tension is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) in order to minimize gas development and corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Significant differences to the Blue Smart IP 65 familyThe two device groups differ in the following points: The type of protection, the IP 67 devices have the best possible protection Blue Smart IP 65 Retäte have a 7-stage loading algorithm, in the IP67 it is 5-stated Scope of delivery:1x Victron BPC120713006 Blue Smart IP67 12/7 7a 12V 230V Battery charger1x operating instructions1x 1.5m battery connection cable red/black
€101,00
-
Victron Victron Blue Smart IP22 12/15 (1) Charger 12V 15a 1 battery
The Blue Smart IP22 12/15 (1) charger of Victron Energy (MPN BPC121542002) is a professional, compact 12V 15A battery charger of the latest generation with a charging output and built -in Bluetooth! The Blue Smart IP22 12/15 (1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/15 (1) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-downloaded "dead" batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 12/15 (1) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 12/15 (1) Blue Smart IP22 Charger Victron part number: BPC121542002 Lades 12V lead-acid, gel, agm and lithium batteries 15a maximum charging current 1 battery charging output Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other features of the 12/15 (1) Blue Smart IP22 Batterieladers Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 12/15 (1) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 12V battery) in order to minimize the gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC121542002 12/15 (1) IP22 Blue Smart Charger 1x operating instructions
€136,55
-
Victron Victron Blue Smart IP22 12/15 (3) Charger 12V 15a 3 batteries
The Blue Smart IP22 12/15 (3) charger from Victron Energy (MPN BPC12154002) is a professional, compact 12V 15A battery charger of the latest generation with 3 charging outputs and built -in Bluetooth! The Blue Smart IP22 12/15 (3) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/15 (3) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-downloaded "dead" batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 12/15 (3) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 12/15 (3) Blue Smart IP22 Charger Victron part number: BPC121544002 Lades 12V lead-acid, gel, agm and lithium batteries 15a maximum charging current 3 battery charging outputs Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other features of the 12/15 (3) Blue Smart IP22 Batterieladers Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 12/15 (3) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 12V battery) in order to minimize the gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC121544002 12/15 (3) IP22 Blue Smart Charger 1x operating instructions
€157,00
-
Victron Victron Blue Smart IP22 12/30 (1) Charger 12V 30A 1 battery
The Blue Smart IP22 12/30 (1) charger of Victron Energy (MPN BPC123047002), is a professional, compact 12V 30A battery charger of the latest generation with a charging output and built -in Bluetooth! The Blue Smart IP22 12/30 (1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/30 (1) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-downloaded "dead" batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 12/30 (1) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 12/30 (1) Blue Smart IP22 Charger Victron part number: BPC123042002 Lades 12V lead-acid, gel, agm and lithium batteries 30a maximum charging current 1 battery charging output Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other performance features of the 12/30 (1) Blue Smart IP22 battery loader Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 12/30 (1) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 12V battery) in order to minimize the gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC123047002 12/30 (1) IP22 Blue Smart Charger1x operating instructions
€197,00
-
Victron Victron Blue Smart IP22 12/30 (3) Charger 12V 30a 3 batteries
The Blue Smart IP22 12/30 (3) charger from Victron Energy (MPN BPC123044002) is a professional, compact 12V 30A battery charger of the latest generation with 3 charging outputs and built -in Bluetooth! The Blue Smart IP22 12/30 (3) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/30 (3) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-discharged batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 12/30 (3) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 12/30 (3) Blue Smart IP22 Charger Victron part number: BPC123044002 Lades 12V lead-acid, gel, agm and lithium batteries 30a maximum charging current 3 battery charging outputs Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other performance features of the 12/30 (3) Blue Smart IP22 Batterieladers Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 12/30 (3) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 12V battery) in order to minimize the gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC123044002 12/30 (3) IP22 Blue Smart Charger 1x operating instructions
€221,00
-
Victron Victron Blue Smart IP22 24/16 (1) Charger 24V 16A 1 battery
The Blue Smart IP22 24/16 (1) charger of Victron Energy (MPN BPC241642002) is a professional, compact 24V 16A battery charger of the latest generation with a charging output and built -in Bluetooth! The Blue Smart IP22 24/16 (1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 24V lead batteries and modern lithium batteries. It offers Highlights of the 24/16 (1) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-downloaded "dead" batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 24/16 (1) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 24/16 (1) Blue Smart IP22 Charger Victron part number: BPC241642002 Lades 24V lead-acid, gel, agm and lithium batteries 16a maximum charging current 1 battery charging output Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other features of the 24/16 (1) Blue Smart IP22 Batterieladers Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 24/16 (1) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 24V battery) in order to minimize gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC241642002 24/16 (1) IP22 Blue Smart Charger 1x operating instructions
€202,00
-
Victron Victron Blue Smart IP65 12/15 12V 230V battery charger
The Blue Smart IP65 12/15 12v 230V battery charger (BPC121531064R) is the latest professional, charger of Victron Energy With built -in Bluetooth. It is designed for charging 12V batteries of various types and provided a maximum charging current of 15a. Together with the free VictronConnect app, you can evaluate the activity of your battery loader easily and smartly via your smartphone, tablet or computer and even configure to a certain degree.Technical highlights of the Blue Smart IP65 12/15 battery charging devices Easy configuration and setup of the Blue Smart IP65 12/15 via Bluetooth interface Suitable for all 12V battery types Max. 15a charging current Solid protection against splash water. Dust and chemicals thanks to protection class IP65 has several functions to extend the battery life duration Automatic temperature comparison at low or high temperatures Automatic power supply function 7-stage, intelligent loading algorithm can restore fully discharged batteries "dead batteries" has low -energy mode for charging small batteries Victron article number: BPC121531064R Lithium-ion battery mode Ultra-High -efficient “green” battery chargerWith an efficiency of up to 95 %, these chargers generate three to four times less heat than the industrial standard. And, after the battery is fully charged, the power consumption is reduced to 0.5 watts, which is five to ten times better than the industrial standard.Durable, safe and quiet low heat load of the electronic components Protected against the penetration of dust, water and chemicals. Protection against overheating: The output current is reduced linearly when the temperature increases to up to 60 ° C, so the charger does not fail at extreme temperatures The chargers are absolutely noiseless thanks to passive cooling: no fan or other moving parts Reconding (recovery)A lead-construction battery. which was not sufficiently loaded or was left in the discharged state for days or weeks, deteriorates their performance due to sulfating. If the process is stopped in good time, it can partially undone the sulfation by loading the battery with low current until a higher voltage has been reached.Function for restoring fully discharged batteriesMost charging devices with polishing protection do not recognize a battery that was unloaded to zero volt or almost zero volt, and therefore do not charge them again. However, the Blue Power charger tries to recharge a fully discharged battery with low current and absorbs the normal charging process after sufficient voltage has been built up over the battery connections.Optional accessories Blue Smart IP 65 12/15 BPC121531064R 12 V cigarette lighter plug with fuse 2 meter extension cable Connection terminals with fuses M6 cable shoe connector with fuse Scope of delivery: 1x Victron BPC121531064R Blue Smart IP65 12/15 230V Battery charger1x operating instructions1x connection terminals1x M8 cable shoe connector
€163,00
-
Victron Victron Bluesolar Mppt 100/30 12V 24V 30A
The Victron Mppt 100/30 (MPN SCC020030200) belongs to the big family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. In addition to the larger loading and PV performance, this Blue differentiates even more from the lower models. Because the 100/30 controller has the ability to fully program and save different charging algorithms. The self-created algos can then be selected directly via a Switch wheels on the housing. The load exit directly on the controller is no longer available from this model More protection compared to the smaller models of the Blursolar Mppt series Compared to the 75/10, 75/15 and 100/15 model, the Bluesolar 100/30 has Mppt Via overheating protection with a switch-off function and automatic recovery after reaching a normal operating temperature. High-speed Mpp-Tracker of the latest generationEspecially when the sky is covered, when the lighting intensity is constantly changing, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 100/30 has some other innovative technologies such as VE.Direct Communication.Options for programming, data in real time and display of the courseModern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Essential product features of the Bluesolar 100/30 30A 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable loading algorithms that can later be activated and used manually via a switch on the housing Nominal charging current 30A, 100V maximum PV empty voltage 440W maximum PV power at 12V, 880W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Day/night-time control and light insulation option Ve.direct data communication sportVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world.Scope of delivery1x Victron SCC020030200 Bluesolar Mppt 100/30 12V 24V 30A LoaderOperating instructions
€101,00
-
Victron Victron Bluesolar Mppt 100/50 12V 24V 50A
The Victron Mppt 100/50 (MPN SCC020050200) belongs to the big family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. In addition to the larger loading and PV performance, this Blue differentiates even more from the next smaller model, the 100/30. More protection compared to the smaller models of the Blursolar Mppt series Compared to the 75/10, 75/15 and 100/15 model, the Bluesolar 100/50 has Mppt Via overheating protection with a switch-off function and automatic recovery after reaching a normal operating temperature. In addition, a PV backstream protection exists from this device in the Blue Mppt Family can be found.High-speed Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 100/50 has some other innovative technologies such as VE.Direct Communication.Options for programming, data in real time and display of the courseModern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Essential product features of the Bluesolar 100/50 50a 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 50a, 100V maximum PV empty voltage 700W maximum PV power at 12V, 1400W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and lighting option Ve.direct data communication sportVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete canbus integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world.Scope of delivery1x Victron SCC020050200 Bluesolar Mppt 100/50 12V 24V 50A LoaderOperating instructions
€152,00
-
Victron Victron Bluesolar Mppt 150/35 12V 24V 48V 35A
The Victron Mppt 150/35 (MPN SCC020035000) belongs to the big family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. In addition to the larger loading and PV performance, this Blue differentiates even more from the next smaller model, the 100/30. Because the area of the battery voltage has also risen with the smallest 150 model so that 48V batterys can also be used.VE-DIRECT options for programming, data in real time and display of the course Modern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.High-speed Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 150/35 has some other innovative technologies such as Ve.direct Communication.Extensive electronic protection- Protection against the polished battery connection- PV backstream lock- Protection against overheating of the device- Protection before short circuits- Protection against the PV connection, PV connectionEssential product features of the Bluesolar 150/35 35a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 35a, 150V maximum PV empty voltage 12V: 500W/24V: 1000W/36V: 1500W/48V: 2000W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and lighting option Ve.direct data communication sportVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world.Scope of delivery1x Victron SCC020035000 Bluesolar Mppt 150/35 12V 24V 36V 48V 35A LoaderOperating instructions
€152,00
-
Victron Victron Bluesolar Mppt 150/45 12V 24V 48V 45A
The Victron Mppt 150/45 (MPN SCC010045222) belongs to the big family of bluesolar Mppt Loader And a wide range of services for the demanding user. Ultra -fast power tracking and automatic adjustment of the Mpp There are only 2 of the many highlights of this device class. The devices of classes 150/45 to 150/100TR are also available as a version with MC4 connections on the solar side of the charge controller instead of screw clamps. In addition, this model dominates the parallel operation with other controllers of the same type.VE-DIRECT options for programming, data in real time and display of the courseModern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Advanced Maximum Power Point Detection of partial shadingIn the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the Bluesolar device will always maximize the energy yield by Mpp set.Essential product features of the Bluesolar 150/45 45a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Paralel operation with other 150/45 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries TR version = connection of the solar modules via screw terminals (max. 35mm²) Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 45a, 150V maximum PV empty voltage Maximum PV performance: 12V: 650W - 24V 1300W - 48V 2600W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and lighting option High-speed Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Extensive electronic protection- Protection against the polished battery connection- PV backstream lock- Protection against overheating of the device- Protection before short circuits- Protection against the PV connection, PV connectionVe.direct data communication sportVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world.Scope of delivery1x Victron SCC010045222 Bluesolar Mppt 150/45 12V 24V 36V 48V 45A LoaderOperating instructions
€382,00
-
Victron Victron Bluesolar Mppt 75/10 12V 24V 10A
The Victron Mppt 75/10 (MPN SCC010010050R) belongs to the large family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 75/10 has some other innovative technologies.Options for programming, data in real time and display of the course Modern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Essential product features of the Bluesolar 75/10 10a 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel 12V 24V systems possible Nennladestrom 10a 145W maximum PV power at 12V, 290W at 24V systems Load exit with 10A power and automatic load shutdown when the battery is threatened (deep discharge protection Integrated protection against battery reolving Multi-level and adaptive loading algorithm Programmable battery charging algorithm Integrated Battery Life Algorithm extends the life of your batteries if he is active and all loads run over the load exit on the controller Day/night-time control and light insulation option Ve.direct data communication sport integratedVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world in the information area.Battery Life Algorithm contributes to increasing the battery lifeIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular full charging) is ideal for small lead battery, especially in the case of bleed acid batteries, such irregular loading and unloading leads to damage to the battery after just a few months and the lifespan is partially quite clearThe Battery Life Algorithm monitors the charging status of the battery and, if necessary, it takes up the threshold every day to separate the load (i.e., the load is separated earlier) until the energy obtained is sufficient to charge the battery up to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery1x Victron SCC010010050R Bluesolar Mppt 75/10 12V 24V 10A Loader
€46,89
-
Victron Victron Bluesolar Mppt 75/15 12V 24V 15a
The Victron Mppt 75/15 (MPN SCC010015050R) belongs to the large family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 75/15 has some other innovative technologies.Options for programming, data in real time and display of the course Modern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Essential product features of the Bluesolar 75/15 15a 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel 12V 24V systems possible Nennladestrom 15a 220W maximum PV power at 12V, 440W at 24V systems Load exit with 15a power and automatic load shutdown with impending subtle tension (deep discharge protection Integrated protection against battery reolving Multi-level and adaptive loading algorithm Programmable battery charging algorithm Integrated Battery Life Algorithm extends the life of your batteries if he is active and all loads run over the load exit on the controller Day/night-time control and light insulation option Ve.direct data communication sport integratedVe.direct In text mode, all important parameters to other devices with the with the Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete canbus integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world in the information area.Battery Life Algorithm contributes to increasing the battery lifeIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular full charging) is optimal for small lead battery and especially in the case of bleed acid batteries, such irregular loading and unloading leads to damage to the battery after a few months and the lifespan partially shortensThe Battery Life Algorithm monitors the charging status of the battery and, if necessary, it takes up the threshold every day to separate the load (i.e., the load is separated earlier) until the energy obtained is sufficient to charge the battery up to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery1x Victron SCC010015050R Bluesolar Mppt 75/15 12V 24V 15a Loader1x operating instructions
€49,00
-
Victron Victron Cerbo-S GX system monitoring
The Cerbo-S GX Communication Center from Victron Energy (MPN BPP900450120) enables perfect control over your system and maximizes its performance. Maximizing the system performance has never been so easy. The cheaper variant of the Cerbo-GX series has all the important features for perfect communication except for the BMS-CAN connection, temperature sensor inputs and resistive tank level inputs. Easy monitoring and control With the Cerbo-S GX, you can monitor electricity consumption, the energy generation from PV, generator and network from anywhere. Simply control the current limitation for country electricity feed, the (automatic) start/stop generator or change any settings to optimize the system. Follow warning messages, carry out diagnostic tests and solve problems from afar. Properties of the Cerbo-S GX communication center Easy control of your system Flexible connection options Maximizing your system performance Uncomplicated assembly Technical data Operating voltage: 8-70 V/DC Assembly: wall or DIN rail 35mm Dimensions: 78 x 154 x 48 mm Operating temperature range: -20 to +50 ° C Cable length: 2 meters Security: IEC 62368-1 EMC EN: EN 301489-1, EN 301489-17 Available connections 3 Ve.direct ports 3 USB ports 4 digital inputs 2 relays 2 Ve.Bus 2 ve.can Flexible connection options The system control by the Cerbo GX communication center is possible regardless of location and time. The device offers three different options for connection. Either via the free Victron Remote Management (VRM) Portal, the Victron Energy GX Touch 50 (5-inch touchscreen display) or via the VictronConnect app via Bluetooth. Scope of delivery: 1x Cerbo-S GX1x power cable with inline protection and M8 connection eyes for battery or DC collection rail fastening.2x Ve.CAN closing resistances1x terminal blocks for all connections on each side.
€197,00
-
Victron Victron Energy Lynx Power in (M8)
The Victron Lynx Power in-module (MPN LYN020102000) is used to connect batteries via an external backup. This can be useful if you have several parallel strings. Due to the extremely high short -circuit current potential of most batteries, it is recommended to use an external safety system with a suitable error vacuum assessment (e.g. an NH HRC). Properties of the Victron Lynx Power in 1000a Negative and positive DC collecting rail Easy installation Part of the modular Lynx distribution system Construction The power in module contains a negative and a positive DC collection rail with M8 screws to connect the battery cables. Cables with a diameter of up to 22mm can be guided through the lower introductions and over the two side connections. Scope of delivery: 1x victron lynx power in
€127,00
-
Victron Victron Energy Meter EM24 - 3 phase - Max 65a/phase Ethernet
The Energy Meter EM24 from Victron Energy (MPN Rel200200100) is a three-phase energy counter with a maximum of 65A pro Phase. He uses Dim Dimer connection/counter box to measure the services on all three phases. The energy meter can be used as: Network meter and is used as a tax input for an ESS system Measurement device for the performance of a PV inverter Measurement device for the performance of an alternating current unit For all uses mentioned above, the measuring device should be connected to the local network so that the GX device can achieve it. Note on GX firmware versions To support the Ethernet EM24 measuring devices, Venus 2.60 is the minimum firmware required on the GX device. Scope of delivery: 1x Victron Energy Meter EM24 Rel200200100
€164,00
They have 408 from 486 Seen products