Solar technology
-
SMA SMA Sunny Home Manager 2.0, 3-phase counters
SMA Sunny Home Manager 2.0 Offers a complete solution for energy monitoring and energy management. The new Sunny Home Manager 2.0 contains an integrated measuring device, so that for standard applications with performance measurement at the network connection point, a separate SMA Energy meter is no longer required. Product advantages: SMA Energy Meter and Home Manager in one device Weather forecasts for consumer control and battery charge Communication with the SMA Sunny Portal Control of receivers Charging with a charger Product features: Assembly on a supporting rail with 4th 3-phase measurement up to 63a Trafom measurement with 5a output current Commissioning via SMA Sunny Portal Weight: 0.3 kg A maximum of 24 devices can be connected to a Sunny Home Manager. The number of controlled components (radio sockets, heat pump or Mennekes Wallbox) must not exceed 12 devices.
€539,00
-
Hoymiles Hoymiles HMT-20000-4T 3F inverters
Hymiles- HMT2000-4T micro inverter The new generation of HOMYMILES microving interchangers from the HMT-20000 series is designed for high-performance photovoltaic modules with a maximum output power of up to 2000 VA and a maximum DC input current of up to 16 A. The innovative 4-input design enables faster installation and lower costs and makes the HMT 2000 series a very cost-efficient choice. The new wireless SUB-1G solution enables more stable communication with the Hoymiles DTU gateway. The intelligent S-Miles Cloud platform enables monitoring at the module level as well as remote operation and remote maintenance. Specifications: Dimensions: 326 × 222 × 40.6 mm Nominal output performance: 2000VA Usual module performance: 400 W to 670 W+ Maximum input current: 4 × 16a Max. Input voltage: 65V Number of connected modules: 4 MPPT voltage area: 16V-60V Number of MPPT: 2
€371,87
-
Solarion Solar plug distributor Y4-1
Increase the capacity of your solar installation with the solar plug cable connection 4mm² 4-fold socket to 1 connection! Suitable for MC4. This Y-branch cable connection enables the seamless connection of four PV panels to a single line. With an impressive nominal voltage of 1000V DC and a waterproofness of IP67, it is equipped for any weather conditions. Made from high-quality PPO/PPE material and with a flame protection assessment of UL94-V0, it is the safe and efficient choice for your expanded solar projects. Efficient Y-branch cable connection: Enables the connection of four PV panels to a single line, which simplifies and optimized installation, ideal for larger solar systems. High quality connectors: The set contains 2x y4-1 connectors that ensure a safe and reliable connection. The color of the connectors can vary depending on the stock. Technical specifications: With a nominal voltage of 1000V DC and a nominal current of 30A, this cable connection is suitable for performance -intensive solar applications. Weatherproof and durable: Thanks to the waterproofness of IP67 and the flame protection assessment of UL94-V0, this cable connection is both water and fireproof, which makes it ideal for the outdoor use. High quality material: Made made of robust PPO/PPE material that is known for its durability and reliability. Certified security: The cable connection is CE certified and belongs to security class II, which confirms your compliance with strict security standards.
€9,89
-
Solarion Solar plug distributor Y3-1
Maximize the efficiency of your solar installation with the 2x solar plug cable connection 4mm² 3-fold socket on 1 connection! (Suitable for MC4) This Y-branch cable connection enables the seamless Connection of three PV panels on a single line. With an impressive nominal voltage of 1000V DC and a waterproofness of IP67, it is equipped for any weather conditions. Made from high-quality PPO/PPE material and with a flame protection assessment of UL94-V0, it is the safe and efficient choice for your expanded solar projects. Efficient Y-branch cable connection: Enables the connection of three PV panels to a single line, which simplifies and optimized installation, ideal for larger solar systems. High quality connectors: The set contains 2x Y3-1 connectors that ensure a safe and reliable connection. The color of the connectors can vary depending on the stock. Technical specifications: With a nominal voltage of 1000V DC and a nominal current of 30A, this cable connection is suitable for performance -intensive solar applications. Weatherproof and durable: Thanks to the waterproofness of IP67 and the flame protection assessment of UL94-V0, this cable connection is both water and fireproof, which makes it ideal for the outdoor use. High quality material: Made made of robust PPO/PPE material that is known for its durability and reliability. Certified security: The cable connection is CE certified and belongs to security class II, which confirms your compliance with strict security standards.
€7,99
-
Sossen Sossen 800W microwores including WLAN
The Sossen Microw Slords with 800 W output power offers a powerful and reliable solution for balcony and small systems. Thanks to its compact design, high efficiency and modern communication interfaces, it is optimally tailored to the requirements of contemporary photovoltaic systems. With integrated WLAN and Bluetooth, the inverter can be conveniently monitored using a smartphone app (TUYA compatible). Thanks to a maximum input current thickness of 20 A, the device is particularly suitable for powerful solar modules with up to 540 WP. The inverter meets all requirements of the VDE-AR-N 4105 and is twice secured with an integrated relay circuit. Protection class IP67 ensures safe use outdoors under all weather conditions. PRoduct properties: 800 W output power for mesh -coupled small systems and balcony power plants Integrated WLAN and Bluetooth function for comfortable remote monitoring A maximum of 20 A PV input current, ideal for modern high-performance modules MPP-tracking efficiency of 99.5 % for optimal energy yield Double protection with integrated relay, compliant with VDE-Ar-n 4105 Protection class IP67, completely weatherproof and suitable for outdoor use Fanless design - noiseless operation through natural convection Compatible with Tuya smart home app for real-time monitoring Upgrade to 1000 W, future -proof through simple performance adjustment 12 years of manufacturer's guarantee for long -term investment security
€85,00
-
Balcony power plant BASIC 1700W/800W with Zendure SolarFlow 800 Pro
Balcon power plant Platin+ with Zendure SolarFlow 800 Pro & 4x Runda 425 WP modules - powerful, memory, future -proof This premium balcony union combines four powerful Runda RS425S8B-108Gant 425 WP solar modules with the intelligent Zendure SolarFlow 800 Pro, Including inverters, loading hub and 1,920 Wh Lifepo₄ memory. Perfect for households with high self -consumption - efficiently, smart controllable and modularly expandable. Total output: 1,700 WP (4 × 425 WP modules) Solar modules-Runda RS425S8B-108Gant Module performance: 425 WP Monocrystalline semi-cell technology with high area efficiency Low performance losses thanks to cell division and MBB technology Robust glass film construction with a black frame Ideal for larger areas and demanding balcony solutions 15 years of product guarantee / 25 years of linear performance guarantee Storage & inverter - Zendure SolarFlow 800 Pro Integrated 800 W microwicists, charging lub and 1,920 WH LIFEPO₄ memory DC-coupled for maximum efficiency up to 96 % 4 mppt inputs with up to 2,640 W PV input-perfect for 4-panel systems Storage expandable to up to 11.52 kWh With additional AB2000S units Plug-and-play-no specialist installation necessary Weatherproof IP65 housing-for balcony, garden or garage 10 years of manufacturer's guarantee Compatible with smart meters for self -consumption optimization Intelligent control & security Control via the Zendure App with real -time data Automated charging planning according to the weather forecast and electricity tariffs Protection mechanisms: overloading, deep discharge, temperature, short circuit Supports dynamic electricity tariffs & network -useful feed -in Your advantages at a glance 1,700 WP PV performance & 1,920 Wh Speicher-for increased self-consumption Ideal for households with a high daily requirement Future -proof expandable to up to 11.52 kWh memory Intelligent energy management via app Robust premium components to easily put into operation Scope of delivery 4 × Runda RS425S8B-108Gant PV modules (425 WP, Monocrystalline) 1 × Zendure SolarFlow 800 Pro Unity (inverter, charging thrust, control) Optional: specialist assembly by our team Our trained team takes over the complete assembly - including material, connection and commissioning. Request an individual offer now! Use solar energy efficiently and flexibly - with the Balcon power plant Platin+ from Zendure & Runda.
€999,00
-
Balcony power plant BASIC 850W/800W with Zendure SolarFlow 800 Pro
Balcon power plant Platin+ with Zendure SolarFlow 800 Pro & 2x Runda 425 WP modules - compact, memory, future -proof Experience smart solar energy in the smallest space with the powerful balcony power plant consisting of two high-quality Runda RS425S8B-108Gant 425 WP solar modules and the innovative Zendure SolarFlow 800 Pro With integrated inverter and lifepo₄ memory. Ideal for balconies, small roofs or rental objects - completely connected and modularly expandable. Total output: 850 WP (2 × 425 WP modules) Solar modules-Runda RS425S8B-108Gant Module performance: 425 WP Monocrystalline semi-cell technology with high area efficiency Low performance losses thanks to cell division and MBB technology Robust glass film construction with a black frame Perfect for compact areas with high standards of optics 15 years of product guarantee / 25 years of linear performance guarantee Storage & inverter - Zendure SolarFlow 800 Pro Integrated 800 W microwicists, charging lub and 1,920 WH LIFEPO₄ memory DC-coupled for maximum efficiency up to 96 % 4 mppt inputs with up to 2,640 W total PV input-optimally prepared for later module expansion Storage expandable to up to 11.52 kWh With additional AB2000S units Plug-and-play-no specialist installation necessary Weatherproof IP65 housing-for balcony, garden or roof 10 years of manufacturer's guarantee Compatible with smart meters for intelligent feed management Intelligent control & security Monitoring and control by Zendure App Time and current price-controlled loading with weather data integration Protection functions: overloading, deep discharge, temperature, short circuit Support for dynamic electricity tariffs & network -useful feed -in Your advantages at a glance 850 WP PV performance and 1,920 Wh memory for high self-consumption coverage Ideal for small households, tenants or limited areas Efficient, low -maintenance and future -proof High quality components with a long service life No electrician - simple and safe commissioning Scope of delivery 2 × Runda RS425S8B-108Gant PV modules (425 WP, Monocrystalline) 1 × Zendure SolarFlow 800 Pro Unit (inverter, hub, control) Optional: specialist assembly by our team We optionally offer you complete assembly including connection and commissioning - through qualified specialist staff. Request now! Your entry into the smart energy future - with the Balcon power plant Platin+ from Zendure and round.
€900,00
-
Balcon power plant Gold+ 890W/800W with Zendure SolarFlow 800 Pro
Balcon power plant Platin+ with Zendure SolarFlow 800 Pro & 2x Trina 445 WP modules - compact, memory, future -proof Experience smart solar energy in a small format with the powerful balcony power plant set consisting of two highly efficient Trina TSM-445NEG9RC.27 445 WP solar modules and the innovative Zendure SolarFlow 800 Pro. Perfect for households with a limited space and high standards of self -consumption and self -sufficiency. Total output: 890 WP (2 × 445 WP modules) Solar modules-Trina TSM-NEG9RC.27 Vertex S+ 445 WP Performance pro Module: 445 WP N -Type TopCon 2.0 Technology for High Efficiency Glass-glass construction: particularly durable and weather-resistant Bifacial technology: up to +10 % additional yield by rear lights Module efficiency up to 22.5 % 144 Monocrystalline half -cells 25 years of product guarantee / 30 years of performance guarantee to ≥87.4 % Storage & inverter - Zendure SolarFlow 800 Pro Integrated microwor interrogator, lifting controller and 48 V Lifepo₄ memory with 1,920 Wh Usable capacity DC-coupled with up to 96 % efficiency Four MPPT inputs with a total of up to 2,640 W PV input-ideal for later module expansion Expandable to up to 11.52 kWh By additional memory Plug -and -play - easy installation without electrician Compact, weatherproof IP65 housing for balcony, terrace or garden 10 years of manufacturer's guarantee Compatible with smart meters to optimize self -consumption Intelligent energy management Control and monitoring by Zendure App in real time Automatic charging planning based on electricity tariffs and weather data Protection functions: over/under charge, temperature monitoring, short circuit Support of dynamic electricity tariffs and network -useful feed -in Your advantages at a glance 890 WP PV performance and 1,920 Wh Speicher-ideal for small households High efficiency and simple commissioning Future -proof expandable to up to 11.52 kWh Compact, durable components with long -term guarantee Ideal for tenants, balconies, garage roofs or terraces Scope of delivery 2 × Trina Vertex S+ 445 WP solar modules (glass glass, bifacial) 1 × Zendure SolarFlow 800 Pro Unit (including microwicor, memory, charginghub) 1 × AB2000S memory module (Lifepo₄, 1,920 Wh) Cable set & assembly material Operating instructions & guarantee card Optional: professional assembly service Our certified assembly team professionally installs your system - including material, connection and commissioning. We are happy to create an individual offer. Make yourself regardless of the power grid - with the compact balcony power plant Platin+ from Zendure & Trina Solar. Ideal for a smart start to the solar future.
€949,00
-
Balcon power plant Platin+ 1780W/800W with Zendure SolarFlow 800 Pro
Balcon power plant Platin+ with Zendure SolarFlow 800 Pro & 4x Trina 445 WP modules - efficient, powerful, future -proof Experience modern energy independence with the premium balcony engineering set consisting of four powerful Trina TSM-445NEG9RC.27 445 WP solar modules and the innovative Zendure SolarFlow 800 Pro, The microw replacement, loading hub and memory combined in a compact device-for maximum efficiency and smart self-supply. Total output: 1780 WP (4 × 445 WP modules) Solar modules-Trina TSM-NEG9RC.27 Vertex S+ 445 WP Performance pro Module: 445 WP N -Type TopCon 2.0 Technology for High Efficiency Glass-glass construction: particularly durable and resistant Bifacial technology: up to +10 % additional yield by rear lights Module efficiency up to 22.3 % 144 Monocrystalline half -cells 25 years of product guarantee / 30 years of performance guarantee to ≥87.4 % Storage & inverter - Zendure SolarFlow 800 Pro Integrated microwor interrogator, lifting controller and 48 V Lifepo₄ memory with 1,920 Wh Usable capacity DC-coupled for high efficiency: energy efficiency up to 96 %-around 25 % fewer losses than Horse 16 V systems Four MPPT strands with total power up to 2,640 W PV input (4 × 660 W), generates 10–20 % more electricity, since Mppt works from 14 V Expandable to up to 11.52 kWh Storage (max. 5 additional AB2000S batteries) Plug -and -play - no electrician necessary GAN-ZE technology for high performance density and compact design IP65-certified-suitable for outdoor use (balcony, terrace, garden) 10 years of manufacturer's guarantee Compatible with smart meters for network management (Shelly Pro 3 em, everHome EcoTracker) Intelligent energy management Zendure Real-time monitoring and control app Starts MPPT charge from only 14 V-more yield at dawn or cloudy sky Automated charging planning, use of cheap electricity tariffs Protection functions: over/under charge, temperature monitoring, short circuit Support dynamic electricity tariffs & network -useful feed -in Your advantages at a glance 1780 WP module power for increasing self -consumption Energy efficiency up to 96 % thanks to the latest DC coupling Bundled technology: memory, inverter, monitoring in one device Max. 11.52 kWh expandable - flexible to your needs adaptable Easy commissioning without craftsmen Robust components with reliable long -term protection Scope of delivery 4 × Trina Vertex S+ 445 WP solar modules (glass glass, bifacial) 1 × Zendure SolarFlow 800 Pro Unit (including microwicists, memory) Cable set & assembly material (set) Optional: professional assembly service We are happy to ensure professional assembly through our certified team - including material, connection and commissioning. Ask for your individual offer! Start your sustainable energy future - with the Balcon power plant Platin+ Powered by Zendure SolarFlow 800 Pro and Trina Solar.
€1.159,00
-
Balcony power plant Pro 1000W/800W with Zendure Hyper2000 + AB2000S
Explan model! - Find the successor model with Zendure SolarFlow 800 Pro cheap here - Link to the product. Balcony power plant Pro with Zendure SolarFlow Hyper 2000 & 2x Jolywood Niwa 500WP Bifacial modules - efficient, safe, memory -capable Use the power of the sun and secure your independence with the high-quality balcony power plant consisting of two bifacial Jolywood JW-HD108N-R2/500WP Niwa N-Type TopCon Solar modules and the intelligent Zendure SolarFlow Hyper 2000 storage system with AB2000S Lifepo4 battery. Ideal for starting the solar self -supply with integrated memory and smart control. Total output: 1000 watts (2x 500wp) Solar modules-Jolywood Niwa JW-HD108N-R2 500WP • Perfomance pro Module: 500WP• N-Type TopCon cell technology-high efficiency, minimal degradation (zero lid)• Bifacial structure - up to 30 % additional power through back -part reflection• Module efficiency: up to 22.5 %• High weak light performance-optimal in diffuse light• 25 years of product guarantee, 30 years of performance guarantee (87.4 %)• Weather and environmental resistant- tested according to IEC, TÜV & with Munich reinsmasy Storage solution - Zendure SolarFlow Hyper 2000 + AB2000S • Bidirectional 1200W hybrid inverter-converts solar power directly into household current• 1920 Wh Usable storage capacity with LIFEPO4 technology• Modular expandable up to 7680 Wh• GAN technology for higher efficiency and lower energy losses• IP65 certification-weatherproof for the outdoor area• Protection functions against overloading, overheating and discharge• Automatic mains load at low storage stalls in winter• 10 years of manufacturer's guarantee Energy management & app control • real -time monitoring by Zendure App - production, consumption, feed -in• AI-based control to maximize the savings• Automatic adaptation to electricity prices, weather and consumption behavior• Control of loading and unloading times for maximum economy Advantages at a glance • 1000WP total output with high -quality memory• Solar power can also be used in little sun or at night• Plug-and-play-easy installation, no electrician required• AI-based energy optimization for maximum savings• durable, safe and weatherproof• Ideal for balconies, gardens, facades or terraces Scope of delivery • 2x Jolywood Niwa JW-HD108N-R2 500WP Bifacial solar modules• 1x Zendure SolarFlow Hyper 2000 microwores• 1x Zendure AB2000S memory (1920Wh, Lifepo4)• 1x battery connection cable• Mounting material & operating instructions Optional: professional assembly serviceWe would be happy to support you in installation - including fastening material, attachment and commissioning. Contact us for an individual offer. Place on smart self -supply with Jolywood & Zendure - for more energy independence in everyday life.
€1.049,00
-
Balcon power plant Platin+ 1780W/800W with Zendure Hyper2000 + AB2000S set
Explan model! - Find the successor model with Zendure SolarFlow 800 Pro cheap here - Link to the product. Balcon power plant Platin+ with Zendure SolarFlow Hyper 2000 & 4x Trina 445WP modules - efficient, powerful, future -proof Experience modern energy independence with the premium balcony engineering set consisting of four powerful Trina TSM-445NEG9RC.27 445WP solar modules and the innovative Zendure SolarFlow Hyper 2000 Set-consisting of bidirectional microwicists and AB2000S LIFEPO4 memory with 1920Wh capacity. The system offers maximum flexibility, intelligent electricity use and strong performance - ideal for households with high self -consumption entitlement. Total output: 1780 watts (4x 445wp modules) Solar modules-Trina TSM-NEG9RC.27 Vertex S+ 445WP Performance pro Module: 445 WP N-Type TopCon 2.0 Technology for maximum efficiency Glass-glass construction: particularly durable, UV and weather-resistant Bifacial technology: Use additional reflected light - up to 10 % additional yield Module efficiency: up to 22.5 % 144 Monocrystalline half -cells 25 years of product guarantee / 30 years of performance guarantee to 87.4 % Storage solution - Zendure SolarFlow Hyper 2000 + AB2000S Bidirectional 1200W hybrid inverter - converts solar power efficiently into budgetary current and loads the memory in the event of an electricity surplus or network current for cheap tariffs AB2000S memory With 1920 Wh Usable capacity (Lifepo4) Modular expandable to up to 7680 Wh by additional batteries (AB1000S or AB2000S) Plug-and-play: no specialist installation necessary GAN technology & intelligent automatic loading and unloading automatic for the highest efficiency IP65-certified For outdoor use on the balcony, terrace or in the garden 10 years of manufacturer's guarantee Compatible with smart meters for network management management management Intelligent energy management Zendure App For real-time monitoring and control Automated charging planning according to electricity prices and weather data Protection functions such as anti-overload, discharge protection & temperature monitoring Support of dynamic electricity tariffs to optimize the costs Advantages at a glance 1780WP total power for maximum self -consumption Use of solar power even at night by integrated memory Bidirectional inverter - also uses cheap network electricity Plug & Play - simple commissioning without electrician Expandable - for growing energy needs Robust, long-lasting premium components with long-term guarantee Scope of delivery 4x Trina Vertex S+ 445WP solar modules (glass glass, bifacial) 1x Zendure SolarFlow Hyper 2000 inverter 1x Zendure AB2000S memory (Lifepo4, 1920wh) 1x battery cable + assembly material (set) Operating instructions and guarantee card Optional: professional assembly serviceOn request, we offer you the professional assembly through our qualified team - including assembly material, installation and connection. Contact us for an individual offer. Make your home self -sufficient - with Zendure & Trina Solar: Your start to a sustainable energy future.
€1.199,00
-
Zendure Zendure SolarFlow 2400 AC linked inverter
Zendure SolarFlow 2400 AC-intelligent AC-coupled memory solution with 2400W power The Zendure SolarFlow 2400 AC is an advanced, AC-coupled hybrid inverter with integrated energy management. It offers a bidirectional loading and discharge output of 2400W and enables seamless integration into existing balcony power plants- without any change in the house circuit. Equipped with GAN technology, AI-based energy planning (Zenki) and automatic network loading, this system is the ideal solution for households that maximize your own consumption and want to reduce electricity costs permanently. Highlights at a glance • 2400W bidirectional AC load and discharge• Plug & Play compatibility with inverters up to 2000W• Extremely fast performance adjustment (• AI energy management for 6–10 % additional savings• Intelligent overload protection for battery recovery in winter• Off-grid output with 2400W for emergency power supply• expandable up to 17.28 kWh (1-phase) / 51.84 kWh (3-phase)• GAN technology for increasing efficiency• Communication via Bluetooth and WLAN• IP65- suitable for indoor and outdoor use Smart energy management with Zenki The SolarFlow 2400 AC continuously analyzes weather data, consumption behavior and electricity prices to optimally control charging and unloading times. The system specifically loads batteries at low prices or negative electricity tariffs and uses the stored energy at high prices or at night. Thanks to real -time control, the power adjustment takes place in less than 3 seconds - precisely to 1 W exactly for consumers from 50 W. Reliable emergency power supply-off-grid operation • 2400W network -independent performance• Normal mode: permanent care of critical consumers such as refrigerators in the event of a network failure• Ecomodus: automatic shutdown after 2 h idle - ideal for household appliances 1-phase and 3-phase compatibility 1-phase system:• Charging/discharge: Max. 2400W• Battery capacity: 2.88 kWh – 17,28 kWh 3-phase system (with several towers):• Charging/discharge: Max. 7200W• Battery capacity: 8.64 kWh – 51,84 kWh Intelligent overload protection The system protects your battery for longer bad weather by automatically feeding mesh flow when the loading status falls below 5 %. The set minimum discharge is observed and the service life of the battery is extended. Zendure App With the Zendure App controls and monitor your entire SolarFlowSystem in real time. Charging and unloading times, battery status, weather forecasts, network electricity prices and historical data are available at any time. Technical data On-grid operation:• Input/output: 230V AC, 50Hz• Max. Power: 2400W Off-grid operation:• Output: 230V AC, 50Hz• Max. Output power: 2400W Battery charge/discharge:• Tension: 37.5V - 54.75V DC• Max. Charging / discharge: 2400W / 2600W• Electricity: 60a / 54.17a Generally:• Effect AC: 93 %• Protection class: IP65• Communication: Bluetooth, WiFi• Operating temperature: –20 ° C to +60 ° C• Dimensions: 448 × 303.6 × 88 mm• Weight: 10.12 kg Scope of delivery • 1x Zendure SolarFlow 2400 AC linked inverter• 1x 3 m AC current cable• 1x key for PV plugs• 4x battery monmonate• 2x wall assembly brackets• 2x self -securing expansion bolts• Screw 4x M4 The Zendure SolarFlow 2400 AC is the ideal solution for everyone who wants to make your balcony power storage solution smart, safe and powerful-with high flexibility, AI-supported energy management and reliable emergency power.
€499,00
-
Victron Victron Multiplus 24/3,000/70-50 24V 230V 2400W 6000W inverter 70a charger
The multiplus 24/3000/70-50 from Victron (MPN PMP243021011) is a device combination of 24V 2400W sinus inverter and battery charger. The permanently integrated battery charger makes a considerable 70a which can also be fully charged even if the land/network current is available. The 24V Sinus voltage converter built into the multiplus converted its electricity from the battery into 230V AC. Thanks to the real sine wave, the electricity quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, a lightning -fast 50a transfer switch is also installed with which numerous network -coupled solutions can also be implemented. In addition to the Ve.Bus Port, a COM port is also available for system integration, which almost enables unlimited networking of the Multiplus.Comprehensive and flexible can be usedSince he also has a lightning -fast 50a transfer switch in addition to inverning people and charger, it is an ideal inverter for the areas of motorhome, boat or yacht and the network -coupled area of the uninterrupted power supply in the case of network fluctuations or power failures. Also for use in network -coupled self -consumption systems that only draw electricity from the supplier if the battery current is no longer sufficient or as a UPS solution in which the multiplus stipulate when the electricity suddenly fails from the network operator and thus ensure an uninterrupted power supply.Essential performance features of the Multiplus C 24/3000/70-50 2400W continuous output and 6000W peak output, for 24V battery voltage Device combination of inverter with transfer switch and 70a battery charger delivers the purest 230V sinus voltage and a clean 50Hz frequency Ve.Bus communication sport ensures extensive possibilities of networking, system integration, configuration and control of the multiplus devices from Victron. Support the three-phase operation (3 equal units of the same model required) Multiplus devices are parallel -switched, up to 6 devices can be connected in parallel and the system performance can therefore be significantly increased if necessary 2 AC exits from Multiplus 3000 and larger. For example, devices that should only run can be connected to the second output if network current is available from the Multiplus 3000 a COM port in addition to the VE.Bus port available, so that there are no longer any limits to the system integration PowerControl function enables working with limited generator performance as well as limited land or network electricity Power assist function enables “increase in performance” by generators and land connection support in the event of can be used as a UPS solution for interruption -free power supply, thanks to the integrated transfer switch with 16A or 50A for network -coupled self -consumption systems that can only be used by the network operator if the battery capacity is no longer sufficient or other programmable events have taken place Compatible with numerous Victron tax and display panels Three phase operation with identical multiplus interverters possible Solid performance expansion possibleApart from the parallel connection, three units of the same model can also be configured for a three-phase output. However, this is not enough: up to six sets with three units can be switched in parallel to achieve a huge 75 kW / 90 kva inverter and over 2,000 A charging capacity (calculated with the 5000 version)PowerControl- Working with limited generator performance, limited land or network electricity The Multiplus is a very powerful battery charger. Therefore, it takes up a lot of electricity from the generator or the land power supply (almost 10A pro 5kva multi at 230 VAC). With the remote control panel Multi Control, the maximum network or generator current can be set. The Multiplus then takes into account other connected alternating current consumers and only uses the electricity for charging, which is still “left”. This prevents the generator or land power connection from being overloaded. Power assist - “performance increase” by generators and land connection support With this function, the PowerControl principle receives a new dimension. It enables the multiplus to support too weak alternative sources. Load tips often only occur for a limited period of time. In such a case, the Multiplus ensures that too weak land current or generator output is immediately compensated for by energy from the battery. Backup system: alternating current even in the event of a network failure The Multiplus can be used in both non-linked and network-coupled PV systems as well as in other alternative energy systems. Software is available for recognizing a network failure.Simple system configuration If settings have to be changed to a single device, this can be done within a few minutes using a DIP switch setting process.Parallel switched and three-phase systems can be configured with the Ve.Bus Quick Configuret- und Ve.Bus System Configurator software. Monitoring options and controls on site Several options are available: battery teacher, Multi Control Paneel, Ve.net Blue Power Panel, Color Control Panel, smartphone or tablet (Bluetooth Smart), Laptop or Computer (USB or RS232). Monitoring and control from a distance Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and remote monitoring of the Multiplus. In addition, the system data can be saved and viewed free of charge on the VRM (Victron Remote Management) website.Configuration from a distanceIf systems are connected to the Ethernet with a color control panel, you can be accessed and settings can be changed from a distance. Scope of delivery:1x VICTRON PMP243021011 Multiplus 24/3000/70-50 device combination consisting of 24V 2400W Sinus converter + 24V 70A battery charger + 50A transfer switch1x operating instructions
€949,00
-
Twin 5 Plus Twin 5 Plus Cam, 32a, RFID, E-Flux, Direct Payment
Twin 5 Plus is Alfens first-class EV charger for business and public users. This model sets a new standard in load capacity and technology integration and fully supports AFIR regulation. Users benefit from the convenience of direct payment via dynamic QR codes and transparent prices displayed in advance on a bright full color-LED screen for easy access and uncomplicated charging. Prepared for the requirements of modern infrastructures, the Twin 5 Plus has ISO 15118 communication skills and is designed for bidirectional performance transmission. In this way, the public charger meets the current technological requirements and is future-proof and adapts to the next innovation spaces in the area of EV load. Pre -configured This Twin 5 Plus EV charger is configured in advance with RFID, BackOffice E-Flux and Direct payment option via dynamic QR codes. Direct payment The Twin 5 Plus is ready for AFIR regulation, so that users can benefit from the convenience of direct payment via dynamic QR codes. Integrated protection The twin is equipped with all the necessary protective functions. The integrated network connection box adds all protective functions that are usually necessary in the external infrastructure and help you save money during installation. Cyber security With the new platform, Alfen is a leader in cyber security. You use a security strategy based on the "Security through Design" and are certified according to ISO 27001. Intelligent shop With its fully renewed software and hardware, the Twin supports various functions such as OCPP 2.0.1, load compensation, smart charging network, ISO 15118 and bidirectional charging (V2G). User -friendliness The clear symbols and the integrated card reader make the twin a user -friendly charging point. Starting and stopping charging sessions is easy. His intelligent functions such as energy billing and ensuring security are invisible to the user. Public charging point The twin is a charging point that can often be found in business and public locations. Its robust construction and user -friendliness make it one of the most popular charging points for public locations. Easy configuration Connect the Twin to a laptop during the installation and enter your preferred configuration settings with our free service installation configuration software.
€6.727,00
-
Twin 5 Plus Twin 5 Plus Cam, 20a, RFID, E-Flux, LB Standard, Direct Payment
Twin 5 Plus Is Alfens the leading EV charging station for business and public users and sets a new standard in terms of loading efficiency and technology integration by fully implementing the AFIR regulation. Users benefit from the convenience of direct payment via dynamic QR codes and transparent, immediate prices that are displayed on a light, full-colored LED screen to facilitate access and easy charging. Prepared for the requirements of modern infrastructures, the Twin 5 Plus is equipped with ISO 15118 communication skills and ready for bidirectional electricity transmission to meet current technology needs and to make itself future-proof for future innovations in the area of EV charging. Pre -installed This Twin 5 Plus EV charging station is pre-installed with RFID, Backoffice E-Flux, standard load compensation and the direct payment option via dynamic QR codes. Integrated protection The twin is equipped with all the necessary protective functions. The integrated network connection box adds all necessary protective functions, usually in the external infrastructure and save costs during installation. Cyber security With its new platform, Alfen is a pioneer in terms of cyber security that uses a secure-by-design strategy and is ISO 27001-certified. Intelligent shop With its fully renewed software and hardware, the Twin supports various functions such as OCPP 2.0.1, load compensation, smart charging network, ISO 15118 and bidirectional charging (V2G). User -friendliness The clear symbols and the integrated card reader make the Twin a user -friendly charging station. Starting and stopping charging sessions is easy. His intelligent functions such as energy billing and security assistance are invisible to the user. Public charging station Due to its robust construction and user-friendliness, the Twin is a frequently found charging station in business and public locations and thus one of the most popular charging points for public locations. Easy configuration Connect the Twin to a laptop during the installation and enter your preferred configuration settings with our free service installation configuration software.
€6.848,00
-
Sungrow SungRow DTU 666 (5) (80a)
The SungRow three-phase smart energy was specially developed for SGX.XRT and SHX.XRT systems and offers a precise and reliable measurement of power consumption in three-phase power nets. Equipped with advanced technology, the SungRow three-phase-smart-energy energy offers precise real-time monitoring and data recording. The high -quality display offers a clear insight into energy consumption so that users can keep an eye on their power consumption patterns. Through seamless integration into SGX.XRT and SHX.XRT systems, this intelligent energy knife of SungRow enables efficient energy management and optimization. Users can pursue and analyze their energy consumption in order to make well -founded decisions to reduce costs and improve overall efficiency. SungRow three-phase smart energy dtu 666 (5) (80a) The three-phase smart energy from SungRow has a user-friendly user interface that enables simple navigation and configuration of the settings in accordance with specific requirements. It supports external access so that users can easily monitor and control their energy consumption via connected devices. In addition, the three-phase smart energy from Sungrow is equipped with robust security measures that ensure the integrity of the data and protect against unauthorized access. It corresponds to industrial standards and offers a safe and reliable energy monitoring solution. Experience the future of energy monitoring with the intelligent three -phase energy knife from SungRow. Take control of your energy consumption, optimize your energy consumption and go towards a sustainable and efficient future. Please note that the functions and specifications of the SungRow three-phase smart energy can vary depending on the model and firmware version.
€157,00
-
Sungrow SungRow 11KW AC EV charging station AC011E-01
Charger for electric vehicles, suitable for 50/60Hz network Safe and reliable 6MA DC error power protection IP65 housing, UV-resistant Intelligent and simple administration Supports intelligent and temporary shop Standard OCCP protocol User -friendly Control by app/RFID/EMS Wall assembly or post mounting SUSTAINABLE Integrated in PV and battery systems for the domestic area Different loadingodi including green loading mode
€866,00
-
Solplanet Solplanet 22kW Apollo EV Charger Cable
Main advantages of the 22kW Apollo EV charging device with cable: IP65 and IK10 certification for robust protection Supports a charging power of up to 22 kW Compatible with type 2 plugs Faster and easy installation process Integrated security functions Versatile application The 22kW Apollo EV charger with cable, part of the Sol Apollo EV charging device series, is versatile and reliable. It is suitable for various applications, including residential and small commercial facilities. The compatibility with type 2 plugs enables flexible installation that meets various electric vehicles and loading needs. The Sol Apollo series includes the following models: Sol 7.4h Sol 11h Sol 22h Reliability and performance With IP65 and IK10 certifications, the 22kW Apollo EV charger ensures durability against dust, water and impact and thus guarantees a consistent performance under different environmental conditions. With a 3-year guarantee, it offers users long-term trust in their investment. The elegant design with a dynamic and robust, streamlined housing contributes to aesthetic attraction. Installation and user -friendliness Thanks to its compact, light and wall-mounted design, the setup of the 22KW Apollo EV charging device is easy. The simple installation process is facilitated by tool-free plug-in clamps and the fast set-up via Bluetooth and the Smart app. The charger also has a user-friendly interface with cable connections on the front or back of the housing, which facilitates the operation and monitoring of the charging sessions. Extended connectivity and control Equipped with an intelligent app, the Apollo EV charger offers remote control and monitoring functions, including planned charging processes and off-peak loadingodi. It supports various communication options such as WIFI, Bluetooth and Ethernet connectivity and offers user authentication via app, RFID and NFC.
€718,00
-
Solplanet Solpanet 7.4kW Apollo EV Charger Cable
Main advantages of the 7.4kW Apollo EV charging device with cable: IP65 and IK10 certification for robust protection Supports a charging power of up to 7.4kW Compatible with type 2 plugs Faster and easy installation process Integrated security functions Versatile application The 7.4kW Apollo EV charger with cable, part of the Sol Apollo EV charging device series, is versatile and reliable. It is suitable for various applications, including residential and small commercial facilities. The compatibility with type 2 plugs enables flexible installation that meets various electric vehicles and loading needs. The Sol Apollo series includes the following models: Sol 7.4h Sol 11h Sol 22h Reliability and performance With IP65 and IK10 certifications, the 7.4kW Apollo EV charger ensures durability against dust, water and impact and thus guarantees a constant performance under different environmental conditions. With a 3-year guarantee, it offers users long-term trust in their investment. The elegant design with a dynamic and robust, streamlined housing contributes to aesthetic attraction. Installation and user -friendliness Thanks to its compact, light and wall-mounted design, the setup of the 7.4kW Apollo EV charging device is easy. The simple installation process is facilitated by tool-free plug-in clamps and the fast set-up via Bluetooth and the Smart app. The charger also has a user-friendly interface with cable connections on the front or back of the housing, which facilitates the operation and monitoring of the charging sessions. Extended connectivity and control Equipped with an intelligent app, the Apollo EV charger offers remote control and monitoring functions, including planned charging processes and off-peak loadingodi. It supports various communication options such as WIFI, Bluetooth and Ethernet connectivity and offers user authentication via app, RFID and NFC.
€515,00
-
SolarEdge Solaredge inline Energy meter with Energy Net, 1ph/3ph 230/400V, 65a
The solaredge 3-phase inline energy knife with Energy Net (article number MTR-240-3PC1-D-A-MW) offers real-time insights into your energy consumption, which helps to reduce your electricity costs and avoid unexpectedly high invoices. This inline energy from Solaredge carries out extremely precise measurements of both imported and exported energy production and consumption. The MTR-240-3PC1-D-A-MW is specially designed for 1-phase network connections and supports direct connections up to 65a pro Phase. The meter communicates wirelessly with all compatible devices via the Solaredge Energy Net and has optional RS485 support. This model automatically recognizes solaredge inverter and can simply be monitored via Setapp. The energy knife fits into every standard meter cabinet and is delivered with a guarantee of 5 years. Advantages of the Solaredge 3-phase inline energy knife 24/7 insights into the energy production and consumption profile Integrated current converter for fast installation and lower labor costs Communicates wirelessly with the inverter via the Solaredge home network Offers an accuracy of ± 1% or ± 2%, depending on the network connection mode Fits easily in standard meter cabinets
€403,00
-
SolarEdge Solaredge inline Energy meter with Energy Net, 1ph 230V, 65A
The solaredge 1-phase inline energy knife with Energy Net (article number MTR-240-3PC1-D-A-MW) offers real-time insights into your energy consumption, which helps to reduce your electricity costs and avoid unexpectedly high invoices. This inline energy from Solaredge carries out extremely precise measurements of both imported and exported energy production and consumption. The MTR-240-3PC1-D-A-MW is specially designed for 1-phase network connections and supports direct connections up to 65a pro Phase. The meter communicates wirelessly with all compatible devices via the Solaredge Energy Net and has optional RS485 support. This model automatically recognizes solaredge inverter and can simply be monitored via Setapp. The energy knife fits into every standard meter cabinet and is delivered with a guarantee of 5 years. Advantages of the solaredge 1-phase inline energy knife 24/7 insights into the energy production and consumption profile Integrated current converter for fast installation and lower labor costs Communicates wirelessly with the inverter via the Solaredge home network Offers an accuracy of ± 1% or ± 2%, depending on the network connection mode Fits easily in standard meter cabinets
€276,00
-
Kostal Kostal Plenticore S G3
The Kostal Plenticore G3 is a transformerless inverter with 3 mpp trackers. Universal as a solar, hybrid or battery inverter can be used with basic services AC 4.0 (s) / 8.5 (m) / 15.0 kW (L). The services can optionally be expanded with 1 - 2x plasticoin.The battery input can be implemented with 3x plasticoin via the 3rd MPP tracker and thus enables the connection of a compatible HV memory. Prepared for additional battery charge via AC energy sources (e.g. for Kostal Doppower). Replacement electricity operation with manual switch Kostal Backup Switch G3 (08-000747) or via Enwitec Netz derivatslaltBox Kostal 3P 35KW (08-000772/773). 4 Digital outputs for load control or event report, SG-Ready.-Compatible Free monitoring via Kostal Solar Portal and Solar appWith the Kostal DC overvoltage protection module G3 (08-000746), direct integration of a ÜS possible.
€1.199,00
-
Kostal Kostal Plenticore L G3
The Kostal Plenticore G3 is a transformerless inverter with 3 mpp trackers. Universal as a solar, hybrid or battery inverter can be used with basic services AC 4.0 (s) / 8.5 (m) / 15.0 kW (L). The services can optionally be expanded with 1 - 2x plasticoin.The battery input can be implemented with 3x plasticoin via the 3rd MPP tracker and thus enables the connection of a compatible HV memory. Prepared for additional battery charge via AC energy sources (e.g. for Kostal Doppower). Replacement electricity operation with manual switch Kostal Backup Switch G3 (08-000747) or via Enwitec Netz derivatslaltBox Kostal 3P 35KW (08-000772/773). 4 Digital outputs for load control or event report, SG-Ready.-Compatible Free monitoring via Kostal Solar Portal and Solar appWith the Kostal DC overvoltage protection module G3 (08-000746), direct integration of a ÜS possible.
€2.099,00
-
Kostal Kostal Plenticoin card de
The QR code on the Plenticoin card is used to access activation codes to expand the Kostal inverter and wall boxes and can be used in the Kostal Solar Webshop. This is one Aweck voucher.
€139,00
They have 96 from 307 Seen products