Solar technology
-
Hoymiles Hoymiles HMS-20000-4T 1F inverter
Hoymiles micro inverter HMS 2000-4T With an output power of up to 2,000 VA, the new HOMYLES HMS-2000 microwicists stands at the 4-in-1 microv signator with the top. Up to four PV modules with an independent MPPT control and monitoring can be connected to each microw interchangeable, which enables higher energy efficiency and simpler use. The new wireless Sub-1 G solution enables stable communication for installations in any environment. Features: Up to four modules can be connected to any micro inverter - fast installation and lower costs Safe in roof solar stations that are equipped with an isolated transformer to resist sudden failures The wireless Sub-1 G solution enables stable communication in commercial and industrial systems High-performance micro inverter with an output power of up to 2000 VA Independent MPPT and monitoring functions enable higher efficiency and easier use The blind performance control system corresponds to EN50549-1: 2019, VDE-AR-N 4105: 2018, UL 1741, NBR 16150, etc.
€349,00
-
Growatt Growatt SPF 3000TL HVM-48 Off-Grid inverter
The Growatt SPF 3000TL HVM-48 off-grid inverter is designed for residential or small commercial systems. The SPF 3000TL HVM-48 inverter is a single-phase mesh-coupled inverter and has a maximum AC output power of 3000W and a maximum DC input voltage of 500V. The Growatt SPF 3000TL HVM-48 is an off-grid inverter and suitable for a maximum circuit voltage of 102VDC. The inverter can be used with batteries, but also without functioning. The integrated solar loader optimizes the charging and unloading of the battery. Priorities can be assigned, e.g. charging from the network has priority in front of the shop from the PV system. Monitoring is possible if a separate Wi-Fi or GPRS dongle is added. The inverter has several advanced functions, such as MPPT technology (maximum power point tracking), which can optimize the output of the solar panels, and an integrated WiFi module that enables remote monitoring and firmware updates. It also has a compact and light design that is easy to install and operate. Solar loader SPF 3000TL HVM-48 The solar loader helps maximize the service life of the battery. This is partly due to the solar loader, which constantly regulates the load of and to the battery. This protects the battery from overloading or complete discharge. surveillance With a separate dongle, it is possible to connect the inverter to a mobile phone or desktop computer, e.g. This enables you to establish a connection and monitor the status of the entire PV system. The dongle has a Wi-Fi and GPRS version.
€434,00
-
Growatt Growatt EV Charger Thor 22AS-S-V1 Wallbox (WiFi)
The Growatt Thor 22AS-S (WIFI) represents Growatt's latest progress in charging technology for electric vehicles. This advanced loader uses professional technology to provide effective energy supply for electric vehicles. Thanks to its user-friendly user interface and diverse functions such as control, billing and communication, this loader is in the foreground of modern EV charging technology. With the ability to connect to a back office server, the Thor charging station users offers the option of making reservations via the specially developed mobile app and making payments. Another important feature is compatibility with all electric vehicles. For those who prioritize sustainability, this loader can be integrated into both an existing and a newly installed photovoltaic system. This allows electric vehicles to be charged with 100 % renewable energy by using excess solar energy. For the installation, the Growatt Thor 22AS-S (WIFI) charging station can be easily attached to a wall or to the Growatt AC Montagepaal. Growatt also recommends installing the Growatt smart meter to optimally use the intelligent functions. Although these loaders were developed for connection to Growatt PV installations, they also work perfectly without a PV system. Specifications Growatt Thor 22AS-S (WIFI) Type: three -phase Connection: socket (without cable) Loading power: 22 kW Dimensions (W x H x D): 295 x 466 x 189 mm Weight: 10 kg Connection: WiFi/LAN Assembly: Suitable for external assembly Protection class: IP 65
€699,00
-
Growatt Growatt EV Charger Thor 11AS-P-V1 (WIFI)
With the THOR 11AS-P-V1 (WIFI) model, the Growatt Thor series presents an intelligent three-phase AC charging station, which was developed especially with advanced technology to efficiently supply electric vehicles with electricity. This charging station is characterized by its user-friendly interface, combined with versatile functions such as control, billing and various communication options for a seamless connection with back office servers. As a result, users can easily make reservations and process payments via the specially developed mobile app. Properties of the Growatt Thor 11AS-P-V1 (WiFi) Universal compatibility: The Growatt Thor 11AS-P-V1 charging station was developed to work with all brands of electric vehicles, which means that users have flexibility in their vehicle choice. Integration of renewable energy: It is possible to integrate the charging process into both existing and newly installed photovoltaic systems. This can benefit users of 100 % renewable energy, in particular through the use of excess solar energy. Intelligent app control: Thanks to the app, users can easily manage and plan the charging sessions, which means that they have full control over the charging process. Robust design: With an IP65 classification, this loader was designed for use both inside and outside.
€860,00
-
Victron Victron Smartsolar Mppt 250/60-TR
The SmartSolar Mppt 250/60-TR from Victron Energy, belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. The controller processes a whopping 60a solar power and can flexibly work with 12/24/36/48 V batteries and that with a maximum PV input voltage of 250V DC. The ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. In addition, this model dominates the parallel operation with other controllers of the same type. Compared to the SmartSolar 150/XX series, the 250/xx series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 250/60-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-L TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/60-TR 60a 12V 24V 48V Mppt Victron Energy Part number: SCC125060210 Max. PV performance: 12 V 860 W / 24 V 1720 W / 48 V 3440 W max. ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation options Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/60-TR prefers to use and configure, you can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second, which is used with the Loader are coupled and thus offers the possibility of communication with additional devices such as the system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The 250/60-TR is also available as a version with MC4 connections on the loader's solar side instead of the screw clamps and this can be found here. Scope of delivery1x Victron SCC125060210 SmartSolar Mppt 250/60-TR 12V 24V 48V 60A Loader1x operating instructions
€376,00
-
Victron Victron Smartsolar Mppt 100/30 30A 12V 24V solar loader
The Victron Energy SmartSolar Mppt 100/30 30A 12V/24V solar Loader (MPN SCC110030210), is the new version of the Bluesolar 100/30. The smart version differs only in the Blue version, primarily by the permanently integrated Bluetooth communication module. This allows the SmartSolar-Loader Completely monitor and analyze on each app-enabled device. The VICTRON Connect app required for this can be installed free of charge. Optionally, the MPPT Wirbox-M from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 100/30 30A 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport high maximum efficiency of 98% For 12V and 24V systems Integrated Bluetooth module 30a maximum charging current Fully programmable loading algorithms that can later be activated and used manually via a switch on the housing 100V maximum PV empty voltage 440W maximum PV power at 12V, 880W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Day/night-time control and light insulation option More protection compared to the smaller models of the SmartSolar Mppt seriesCompared to the 75/10, 75/15 and 100/15 model, the SmartSolar 100/30 has Mppt Via overheating protection with a switch-off function and automatic recovery after reaching a normal operating temperature.Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 100/30 has some other innovative technologies such as VE.Direct Communication. Options for programming, data in real time and display of the courseModern Apple and Android smartphones, tablets, macbooks and other devices can be used, for example, via the integrated Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Flexible loading algorithmsFully programmable charging algorithm (also note the software page on our website) and eight pre-programmed algorithms that can be used to be outdated via a rotary knob (further details can be found in our manual). Scope of delivery: 1x Victron Energy SCC110030210 SmartSolar Mppt 100/30 30A 12V/24V solar Loader1x operating instructions
€116,00
-
Hoymiles Hoymiles DTU PRO-S WiFi surveillance module
Hoymiles dtu-PRO-S monitoring module It is used for wireless communication on the frequency of Sub-1g with Hoymiles microving. The DTU-PRO-S module only works with a 3-phase HMT and 1-phase HMS microw replacement. Most important advantages: Monitoring and data acquisition at the module level Stronger communication with the micro inverter and the surveillance server More precise monitoring of photovoltaic energy generation Supports the limitation of the energy export and the application of the zero The Sub-1G radio solution enables stable communication with HMS and HMT microwave interrichers More communication options with Ethernet, Wi-Fi or 4G. Specification: Communication with the micro inverter: Signal: Sub-1G Maximum distance (free space): 400m Limit value for data surveillance panels: 99 Data transmission to the counter: Signal: RS 485 Maximum distance: 400m
€218,97
-
Hoymiles Hymiles DTSU 666 counters with electricity converter 3x100a transformers (3 phases)
Hymiles dtsu 666 The counter DTSU has an LCD display, carries out a bidirectional measurement and is installed on a DIN rail. Technical data: Work area: -40 ° C - + 75 ° C Protection class: IP54 Dimensions: 98 x 65 x 72 mm Weight: 0.4 kg RS485 communication LCD display CT transformers
€168,01
-
Balcony power plant Pro 1000W/800W with Zendure SolarFlow 800 Pro
Balcony power plant Pro with Zendure SolarFlow 800 Pro & 2 × Jolywood Niwa 500 WP modules - compact, efficient, intelligent energy for at home Place on the highest quality and modern technology with our balcony power plant Pro. Equipped with two powerful Jolywood Niwa 500 WP Bifacial glass glass modules and the intelligent Zendure SolarFlow 800 Pro Including 1,920 WH LIFEPO₄ memory, create your own electricity - efficiently, safe and expandable at any time. Total output: 1000 WP (2 × 500 WP modules) Solar modules - Jolywood Niwa Black JW - HD108N - R2 500 WP N-Type TopCon semi-cell technology with up to 23.2 % module efficiency Bifacial structure - back light for up to 30 % additional yield Robust glass-glass construction-high durability and protection against environmental influences 0…+3 % performance tolerance, temperature coefficient −0.28 %/° C Dimensions: 1960 × 1134 × 30 mm, weight: 27.3 kg 25 years of product guarantee / 30 years of performance guarantee to ≥87.4 % Inverter & memory - Zendure SolarFlow 800 Pro 800 W microwicists with 1,920 Wh Usable Lifepo₄ memory DC-coupled solution with up to 96 % efficiency Four MPPT inputs (up to 2,640 W PV performance in total), start from only 14 V Expandable to up to 11.52 kWh Storage capacity Plug-and-play-no electrician is necessary Weatherproof according to IP65, GAN technology for high performance density 10 years of manufacturer's guarantee, smart meter-compatible Intelligent energy management Control via the Zendure App in real time Automatic charging planning based on electricity tariffs and weather forecasts Integrated protective functions: overloading, deep discharge, temperature control Compatible with dynamic electricity tariffs and network -useful operation Advantages at a glance 1000 WP solar power for starting self -supply Electricity storage for use in the evening or with electricity price peaks Compact size, high performance - ideal for balconies, terraces or carports Expandable and future -proof - up to 11.52 kWh Storage capacity Durable premium components with extensive guarantees Quickly assembled, ready for use - without specialist knowledge Scope of delivery 2 × Jolywood Niwa 500 WP glass glass bifacial solar modules 1 × Zendure SolarFlow 800 Pro including inverter and AB2000S memory Connection cable and assembly material Operating instructions and guarantee cards Optional: assembly service On request, we take over the complete installation through our certified assembly team. Request your individual offer now! Your entry into solar self -sufficiency - with the balcony power plant Pro powered by Jolywood & Zendure.
€999,00
-
Kostal Kostal Plenticore M G3
The Kostal Plenticore G3 is a transformerless inverter with 3 mpp trackers. Universal as a solar, hybrid or battery inverter can be used with basic services AC 4.0 (s) / 8.5 (m) / 15.0 kW (L). The services can optionally be expanded with 1 - 2x plasticoin.The battery input can be implemented with 3x plasticoin via the 3rd MPP tracker and thus enables the connection of a compatible HV memory. Prepared for additional battery charge via AC energy sources (e.g. for Kostal Doppower). Replacement electricity operation with manual switch Kostal Backup Switch G3 (08-000747) or via Enwitec Netz derivatslaltBox Kostal 3P 35KW (08-000772/773). 4 Digital outputs for load control or event report, SG-Ready.-Compatible Free monitoring via Kostal Solar Portal and Solar appWith the Kostal DC overvoltage protection module G3 (08-000746), direct integration of a ÜS possible.
€1.649,00
-
Growatt Growatt 1ph Hybrid inverter MIN 6000TL-XH
Note: Not suitable for the German network.The Growatt MIN 6000TL-XH is a string inverter that was developed for living and smaller commercial projects. This single -phase inverter has several MPPT in order to always optimize the yield for the existing environmental conditions. Properties of the Growatt Min 6000TL-XH The most important features of the Growatt MIN 6000TL-XH inverter are: High efficiency: This Growatt inverter has a top efficiency of 98.4%, which means that this percentage of the generated electricity can actually be used for electrical devices. Compact and light design: The inverter is light and small and therefore simply installed in small or narrow rooms. Of course, the inverter should always be installed in a well -ventilated room. Dual-mppt (maximum power point tracking): The inverter has dual mpps, with which he can track the maximum position of each solar module independently and the energy yield of the entire system is maximized. Flexible connectivity: The inverter supports various communication options, including Wi-Fi, Ethernet and RS485, so that the solar system can easily be monitored and managed via various devices. User -friendly interface: The inverter has a user-friendly interface with a built-in LCD display and clear buttons with which the performance and functions can easily be read and managed. Robust and durable: The inverter housing is made of high -quality materials and has a robust design that is resistant to rough environmental conditions. Integrated DC switch: The inverter has an integrated DC switch that simplifies the installation process and lowers the costs.
€664,00
-
Fronius Fronius Symo Gen24 SC 12.0 Plus
The Fronius Symo Gen24 SC Plus convinces with a variety of integrated features that make the hearts of private system owners beat faster. Communication via WLAN and Ethernet as well as the simple and quick integration of third-party components offer high flexibility with other software and hardware products. The standard -based basic emergency power supply PV Point guarantees security of supply and the greatest possible independence.In the SC variant, Fronius has increased the possible DC input currents on the inverter. This allows high current modules to be connected without any problems. Thanks to the Multi Flow Technology, longer emergency power supply and higher self -consumption are made possible.Open interfaces can be easily integrated by third-party components. Optionally, Fronius offers a full backup emergency flow function for operation of heat pumps.
€2.856,00
-
Sunman Sunman 310W flexible solar module - SMF310M -5x12DW
The Sunman SMF310M-5x12DW solar module is an innovative solution to the efficient and sustainable energy generation. This module combines the advanced glass -free technology from Sunman with a light and flexible design, which is particularly predestined for demanding installations on roofs, facades and mobile applications. Despite its low weight, the SMF310M-5x12DW offers impressive performance and durability, which can cover the energy requirement for both private and commercial applications. With its high efficiency and simple assembly, it offers an economic and environmentally friendly alternative to conventional solar modules. Technical data of the SMF310M-5x12DW: Maximum performance (PMAX): 310 W Module efficiency: 19,1 % Idle voltage (VOC): 40.4 V Short circuit current (ISC): 9.83 a Maximum voltage (VMPP): 33.4 V Maximum current (IMPP): 9.28 a Dimensions: 1719 mm x 1140 mm x 2 mm Weight: 5.5 kg Temperature coefficient (pmax): -0.37 %/° C Operating temperature: -40 ° C to +85 ° C Connection cable: 4 mm², 900 mm length Connector: MC4 compatible Certificates: IEC 61215, IEC 61730 Maximum system voltage: 1000 V (IEC) Protection class: IP68 The Sunman SMF310M-5x12DW offers a reliable, low-maintenance and highly efficient solution for sustainable energy projects of any size.
€165,41
-
Wallbox Wallbox Pulsar Plus (11kw / 5 meters / type 2 / black)
Pulsar Plus is the smallest powerful e-car charging station from Wallbox. It finds space everywhere and changes its color depending on the charging status. So you know at a glance whether your car is still loading or is already ready for use. It is available with many charging cables and current strengths and can therefore load all electric cars with up to 22 kW. The MyWallbox app now makes it easier. It enables you to manage your charging station via WLAN and Bluetooth from any smart device. You can use it to control loading processes, create schedules, receive notifications and much more. With Pulsar Plus you check theCharging process and go with a full battery every morning.
€724,00
-
Kostal Kostal Smart Energy Meter G2
The Kostal Smart Energy Meter (KSEM) is an energy meter with a wide range of functions. Thanks to additional computing power in the device, it is technically prepared for future functions and tasks and offers the optimal solution for all Kostal inverters. A great advantage of the KSEM is the standard preliminary configuration for the Plenticore Plus, Piko IQ and Piko MP Plus. This means that direct installation is possible without adapting the parameters and other settings. Kostal Smart Energy Meter Optimal energy use The Kostal Smart Energy meter enables optimal use of energy in the household. With the energy meter there is a 3-phase energy measurement in real time. The measurement data is transmitted via standard interfaces to the inverters. The KSEM thus supports the energy management of Kostal inverter Plenticore Plus, Plenticore BI, Piko IQ and Piko MP Plus. In conjunction with a PIKO 4.2 - 20 or Piko 36 EPC, the Kostal Smart Energy Meter is a replacement for the Piko BA Sensor. The inverters can be set up in the Kostal Smart Energy meter with the aim of solar self-maximization and the display of the own/house consumption in the solar portal. To do this, the Kostal Smart Energy meter must be integrated into the Kostal solar portal.
€299,00
-
Growatt Growatt SPF 3500 ES (WiFi) Off-Grid inverter
High yields DC/AC ratio of up to 1.2 Double top performance possible Output performance factor up to 1.0 Scalable and flexible Up to 6 units parallel to the capacity expansion Multiple personalized operating modes for various scenarios Compatible with lithium, lead-acid and gel batteriesIntelligent and reliable Support of WLAN and GPRS remote monitoring PVKEEPER platform for local commissioning Timing of loading and performance control
€589,00
-
Growatt Growatt RS485/Can
Product Growatt RS485/CAN is a battery communication connection box with 8 connection sports.
€14,00
-
Victron Victron AGM 12V 220AH deep cycle battery battery
The AGM 12V 220AH Deep-Cycle Battery from Victron Energy is characterized by high cycle resistance and, due to its low internal resistance, is ideal for applications with high-stream discharge, as is the case, for example, when operating an inverter in a solar system. Features of the Victron 12V 220AH deep cycle AGM battery Victron part number: BAT412201084 Battery tension: 12V Battery capacity: 220ah Lifespan at 20 ° C 7-10 years Cycles at 20 ° C and 30% discharge: 1500 Cycles at 20 ° C and 50% discharge: 600 Cycles at 20 ° C and 80% discharge: 400 low inner resistance Very good tolerance of high -stream discharge Weight: 65 kg, dimensions (BXLXH): 52.2 x 23.8 x 24 cm Typical areas of application of the Applications with high-stream discharge, for example solar systems with inverter on the solar battery Perfectly used as a starter battery Drive battery Ray rudder, winds etc. Low self -discharge Thanks to the processing of high-pure materials and lead-calcium grids in the Victron AGM 12V 220AH battery, it is ensured that the self-discharge of this battery is particularly low. This prevents the battery from unloading itself too quickly for a long time without charging. Perfect contact: with M8 Cycled cable shoe Thanks to the permanently integrated copper cable shoes, the deep cycle battery 12V 220AH offers the best possible contact and thus ensures a perfect current flow, without performance losses due to a poor battery connection. Scope of delivery: 1x Victron Energy BAT412201084 AGM 12V 220AH deep cycle battery
€465,00
-
Victron Victron Orion-Tr 12/24-10 240W DC-DC voltage converter isolated
The Orion-TR 12/24-10 from Victron Energy (MPN ORI122424110) is a galvanized DC-DC voltage converter and ensures a regulated DC voltage and thus for the interference-free operation of your DC consumers. The compact Orion-Tr DC-DC voltage converter converts the DC input voltage (8-17V) into a controllable 24V output voltage (20-30V) and delivers a constant permanent current of 10A, which corresponds to an output of 240W. Thanks to the Orion-Tr 12/24-10, you can supply every 24V consumer with exactly the right voltage. The correct voltage is also guaranteed for longer lines, since the Orion can adapt the tension to occurring management losses. With many sensitive electronics devices, compliance with the exact operating tension is essential for a smooth function. Furthermore, the Orion-TR 12/24-10 dominates the parallel circuit with identical devices and has a remote-controllable on switch. Important features of the Orion-Tr 12/24-10 240W (with a galvanic separation) Victron Energy Part number: Ori122424110 for 12V battery voltage, adjustable output voltage 20-30V Max. 240W output power with a maximum current of 10A Wide input span area: 8-17V Protection class IP43, galvanic separation 200V DC between the entrance, output and housing can be switched in parallel with similar devices for increasing performance Remote control on and off switch high efficiency of 87% Not suitable for charging batteries. Please consider the use of an Orion-Tr Smart to charge the batteries. Remote-controllable ON/OFF switches Due to the remote control in/out connection, no high current switch in the input cabling is no longer necessary. The remote control in/out connection can be controlled with a power saving switch or by the run/stop switch of the engine (see manual). Scope of delivery: 1x Victron Energy Ori122424110 Orion-Tr 12/24-10 10a 240W DC-DC voltage converter
€123,00
-
Victron Victron Smartsolar Mppt RS 450/100 48V loader
The Mppt RS SmartSolar from Victron Energy (MPN SCC145110410) is a 48V-Solar loader With a PV input voltage of up to 450 VDC and an output of 100a. It is used in network -bound and network -independent solar applications in which maximum battery noise is required. Characteristics With ultra -fast Maximum Power Point Tracking (Mppt) Several independent Mppt-Tracking inputs Isolated PV connections for additional security Tall Mppt-Place Light, efficient and quiet Integrated display and Bluetooth communication PV isolation resistance monitoring for security at higher voltages Ve.can and ve.direct connection E/A compounds Configure and monitor with VictronConnect app or in the VRM portal The integrated BluetoothsMart connection enables quick monitoring or configuration of the settings via app. The integrated 30-day course shows the individual performance of the individual Mppt-Tracker. The app enables the display of e.g. battery voltage and current, PV voltage and current, course data and trends. The VictronConnect app is available for Android, iOS, Windows and MacOS X.If the solar controller is connected to a GX device and the Internet, the Victron Remote Management Portal (VRM) offers access to the full performance of your SmartSolar RSLoader. Additional units switched into series The SmartSolar RSLoader is equipped with Ve.can bus connections. This enables communication with additional SmartSolar RS & VE.CAN Mppt-units. The additional units are simply "chained" with a RJ45 cable. If you are connected, synchronize all individuals Loader Your charging levels. You can also send your data to a GX device (such as the Cerbogx) via the same cable for monitoring. Technical data Battery voltage: 48V Nominal charging current: 100a Max. Charge power: 5.8kw at 57.6V Ladeal gorithm: multi -stage adaptive (adaptable) Max. DC-PV voltage: 450V Mppt-Operating voltage area: 80-450V Number of trackers: 2 Max. PV operating current: 18A pro tracker Protection class: IP21 Dimensions: 440 x 313 x 126 mm Weight: 7.9 kg Scope of delivery: 1x Victron Smartsolar Mppt RS 450/100 48V Loader
€1.004,00
-
Victron Victron Blue Smart IP22 12/15 (1) Charger 12V 15a 1 battery
The Blue Smart IP22 12/15 (1) charger of Victron Energy (MPN BPC121542002) is a professional, compact 12V 15A battery charger of the latest generation with a charging output and built -in Bluetooth! The Blue Smart IP22 12/15 (1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/15 (1) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-downloaded "dead" batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 12/15 (1) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 12/15 (1) Blue Smart IP22 Charger Victron part number: BPC121542002 Lades 12V lead-acid, gel, agm and lithium batteries 15a maximum charging current 1 battery charging output Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other features of the 12/15 (1) Blue Smart IP22 Batterieladers Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 12/15 (1) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 12V battery) in order to minimize the gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC121542002 12/15 (1) IP22 Blue Smart Charger 1x operating instructions
€136,55
-
BYD BYD battery box Premium HV BCU (HVS/HVM control unit) + base (base)
The Battery Box Premium HVS is an innovative and flexible solution for energy needs. This modular battery unit enables a usable capacity of 5.1 to 12.8 kWh, which can be easily adapted to growing requirements. Developed for the emergency power supply and off-grid applications, the HVS series is compatible with leading high-voltage battery interrichments and, with its cobalt-free LFP batteries, fulfills the highest safety standards, including VDE 2510-50. The simple plug-and-play installation with internal plug connection makes additional cabling superfluous and thus makes commissioning easier. In contrast, the Battery Box Premium HVM offers an even higher capacity of 8.3 to 66.2 kWh For more demanding energy applications. This series is the ideal choice for use in systems that require a reliable and powerful source of energy. The HVM series's battery modules ensure high reliability and safety, supported by the use of LFP battery technology. The adaptable design allows an uncomplicated expansion of the storage capacity and thus ensures future -proof energy solution that grows with the needs of users. Battery box Premium HVS Modular performance: Thanks to its modular design, the Battery Box Premium HVS offers a usable capacity of 5.1 to 12.8 kWh, which can be scaled for individual requirements. Highly voltage: Compatible with leading 1- and 3-phase high-voltage battery interrichers, ideal for emergency power supply and off-grid solutions. Maximum security: Equipped with cobalt-free LFP batteries, it fulfills the highest security standards including VDE 2510-50. Plug-and-play installation: The internal plug connection enables easy and quick installation without additional cabling. Battery box Premium HVM Extended capacity: With a capacity of 8.3 to 66.2 kWh Due to HVM modules connected in series, this solution offers flexibility and scalability for more extensive energy needs. Reliable energy source: Ideal for demanding use in self -sufficient and emergency power systems with high performance requirements. Durable and safe: The use of LFP batteries ensures durability and corresponds to the highest safety standards. Adaptable design: Simple expansion of the storage capacity if necessary, without complex conversions or installations.
€529,00
-
Huawei Huawei Sun 2000-25ktl-M5
With the transition from the M2 to the M5 series, the Huawei 12-25ktl devices have received an impressive update that makes it easier, slimmer and more intelligent. The weight reduction of around 4 kg and the smaller dimensions is particularly noteworthy, which makes it particularly user -friendly. The increased input flows offer improved performance. Another feature of this series is the availability of an internal optimizer as an optional accessories, which means that the devices can be used more flexibly and more efficiently in different applications. Product advantages: Higher DC input current for improved energy efficiency. Smaller and lighter design, which simplifies installation and handling. Compatibility with all new Huawei optimizers, which enables a wide range of application. Product features: AC power of 25.0 kW. Two MPPTs for optimized energy recording. 3-phases AC connection for wide possible uses. Communication options include RS485, WiFi/LAN (optional), and 4G/3G/2G (optional). Protection class IP66 for high resistance in various environments. Active cooling for efficient heat dissipation. Compact dimensions of 460 x 546 x 228 mm (H x W x D). A weight of 21.0 kg, which facilitates the installation. The devices are compatible with a number of Huawei Optimizers such as Sun2000-450W-P, Sun2000-450W-P2, Sun2000-600W-P, Sun2000-1300W-P, Sun2000-100W-P, which offers additional flexibility in their application.
€2.525,38
-
Huawei Huawei Back Up Box B0 - for WR L1 series
Huawei Backup Box B0 Backup power supply module for three-phase Huawei inverter of the L1 series. The Backup Box B0 is used in roof PV systems to control the network and island operating status of the three-phase inverter of the Huawei L1 series. In the event of a network failure, the inverter switches to the island operation and does not supply electricity to the network connected to the network in backup mode. If you set up the backup box B0 outdoors, you should not expose it to direct sunlight. It is recommended to install them in a protected place or to provide them with a cover. In the circuit of the backup box B0, an SPD overvoltage protection must be installed on the network page. Basic features: Backup power module for three-phase Huawei inverter of the L1 series Separate single -phase circuit, maximum performance 5kVA, IP 65, weight 11.00 kg. Compatible with Huawei Change Model L0 and L1 Reliable 1-phase emergency power supply Automatic detection of a network failure and switching to the battery Maximum apparent power of 5.0 kva
€562,38
They have 72 from 307 Seen products