From a small socket to a home battery: this overview brings together the photovoltaic range of Energie24.Shop. It is a good starting point if you want to get an overview.
The Fronius Ohmpilot Eco is a load controller that uses PV surplus for water heating. It controls heating elements of up to 9 kW and thus increases the self-consumption of your solar system. It is intended in particular for Fronius PV systems with storage. It is designed for easy integration into modern energy systems and is an economical solution for Fronius PV systems with storage.
Highlights
Using surplus: Uses PV surplus specifically for hot water
Heating element control: Controls heating elements of up to 9 kW
Storage combination: Particularly useful in combination with battery storage
Heat pumps: Integration of compatible heat pumps is possible
Monitoring: Monitoring via Fronius Solar.web
Technical specifications
Designation
Value
Rated voltage
230 / 400 V
Frequency
50 / 60 Hz
Output power
3 kW single-phase / 9 kW three-phase
Protection rating
IP65
Dimensions
215 x 355 x 55 mm
Weight
1 kg
Mounting type
Wall mounting
Interfaces
Modbus RTU, LAN, WLAN
Scope of delivery
1x Fronius Ohmpilot Eco load controller
Who is it for?
The Ohmpilot Eco is aimed at operators of Fronius PV systems who want to use surplus solar power for hot water. According to the description, it is an economical solution for systems with storage. Fronius Solar.web is available for monitoring, and according to the description the device is designed for easy integration into modern energy systems.
We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
The Hoymiles HF-800-2WB WiFi from the HiFlow series is a compact microinverter for solar panels with an output of 320 – 520+ W. It is equipped with an integrated Wi-Fi and Bluetooth module that allows easy integration into monitoring. Thanks to its plug-and-play solution with Flex S3 cable, installation is particularly user-friendly. With a maximum input current of 16 A, it is ideally designed for modern high-power panels. Its housing is weatherproof and designed for many years of outdoor use. The inverter impresses with its low weight and compact dimensions, so it can be mounted easily.
Integrated Wi-Fi and Bluetooth module
Plug-and-play installation with Flex S3 cable
Compact, lightweight design for high-power panels
The Hoymiles HF-800-2WB WiFi is a microinverter with integrated Wi-Fi/Bluetooth for convenient monitoring. It is suitable for solar panels up to 520 W and offers easy installation with a Flex cable.
Scope of delivery: 1x Hoymiles HF-800-2WB WiFi, 1x Flex S3 plug-and-play cable 5 m
Protect your solar installation with the Betteri BC05 end caps!
With their perfect fit for BC05 connectors, they provide a reliable seal against moisture and dust.
These precisely manufactured TPU dust caps offer optimal protection for unused BC05 connections on inverters or solar panels.
Made in Germany, they meet the highest quality standards and are designed for both indoor and outdoor use.
Optimal protection: Designed to protect unused BC05 connections from moisture, dust and other environmental influences.
Perfect fit: Specially developed for BC05 connectors, they provide a secure and reliable seal.
Versatile use: Thanks to their robustness and quality, these caps are suitable for both indoor and outdoor use.
High-quality material: Made from TPU, a durable and flexible material that offers both protection and longevity.
Scope of delivery: Each order contains 1 BC05 end cap, ready for immediate use in your solar installation.
The Zendure SolarFlow AB3000L is an expansion battery that adds 2.88 kWh of LiFePO₄ storage to compatible SolarFlow systems. It is designed for the modular expansion of the SolarFlow series and is particularly suitable for the SolarFlow 2400 Pro and SolarFlow 2400 AC+. It is aimed at anyone who wants to store more solar power temporarily.
Highlights
2.88 kWh capacity: LiFePO₄ cell technology, designed for 6,000 cycles
Protection rating IP65: Protected against dust and water jets, can also be used in sheltered outdoor areas
Self-heating function: Supports operation at low temperatures
Safety: Battery management, protection against overvoltage, overcurrent, short circuit and overheating
Aerosol fire suppression system: For additional safety during operation
Technical specifications
Designation
Value
Battery type
LiFePO₄
Rated voltage
48 V DC
Rated capacity
60 Ah / 2,880 Wh
Battery cycle life
6,000 cycles
Max. input/output power
1,680 W with one battery, 1,920 W with two or more batteries
Charging temperature
0 °C to 55 °C
Discharging temperature
-20 °C to 60 °C
Dimensions
394 x 257 x 283 mm
Weight
approx. 27 kg
Protection rating
IP65
Scope of delivery
1x Zendure SolarFlow AB3000L expansion battery
Who is it for?
The AB3000L is aimed at owners of compatible Zendure SolarFlow systems who want to expand their storage capacity. According to the Zendure product page, it is intended for the SolarFlow 2400 Pro and SolarFlow 2400 AC+; according to the manual, further systems are also supported. Please check compatibility with your system beforehand. According to the description, the compact expansion battery offers simple system integration.
Good to know
Depending on the grid operator, storage systems should be properly registered, including in the Marktstammdatenregister (German market master data register, MaStR).
We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by email at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
The Marstek MST MI0800W is a single-phase microinverter for balcony power plants and small PV systems of the Saturn M series. It converts the direct current generated by up to two solar panels into grid-compliant alternating current and is designed for a maximum output power of 800 W. The series is designed for easy plug-and-play installation with MC4 connectors, high MPPT efficiency and robust outdoor use. For the MST MI0800W, Marstek specifies two MPPTs, an MPPT efficiency of 99.8 percent, a maximum efficiency of 96.5 percent and protection rating IP67. This makes the device suitable for compact solar applications on a balcony, garage or garden shed. Within the Saturn M series, the MST MI0800W is positioned as the 800 W variant for typical use in a balcony power plant.
2 independent MPPTs
IP67 protection for outdoor use
Wi-Fi monitoring and 10-year warranty
The Marstek MST MI0800W is a compact microinverter with 800 W output power for two PV panels. It combines easy installation with good efficiency values, Wi-Fi monitoring and a high protection class for outdoor use.
Scope of delivery: 1x Marstek microinverter MST MI0800W
Note: The BC01 connection cable is not included in the scope of delivery and must be purchased separately.
to the connection cableBetteri BC01 connection cable balcony power plant female to Schuko – Energie24.Shop
Experience mobile power supply at its best with the Zendure ACE 1500. This powerful AC module offers a reliable solution for emergency power applications and mobile energy needs. With an impressive rated power of 1,500 W and a peak power of up to 3,000 W, it delivers power exactly when you need it. Thanks to the high power factor (>0.99), energy is converted and supplied efficiently.
Versatile and powerful
AC output: Run your household appliances without any problems up to a power of 1,500 W (maximum 3,000 W).
Robust and reliable: Ideal for outdoor use and in emergencies thanks to its robust design and high output power.
Flexibility and compatibility
Battery compatibility: Can be combined with AB1000 and AB2000 batteries for extended possibilities of use.
Solar energy: Compatible with various solar panel brands for flexible charging options.
Safety and reliability
Uninterruptible power supply: Ideal for sensitive devices with low power consumption that need constant power.
Additional features
400 W MPPT: An additional 400 W MPPT enables faster charging. In combination with Hub 1200, the capacity increases from 1,000 W to 1,400 W, while Hub 2000 increases the capacity from 1,800 W to 2,000 W.
TOU cost efficiency: The Zendure app is linked to the Nord Pool day-ahead energy prices and helps to reduce energy costs through time-of-use tariffs.
Fast emergency power switchover: In the event of a power outage, the ACE 1500 switches to emergency power in just 20 ms, so that your devices can keep running without interruption.
Technical specifications
AC output 230 Vac: Rated power 1,500 W (peak power 3,000 W)
Power factor range: >0.99
USB-C output: 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓3.25A, 65W Max
USB-A output: 5V⎓2.4A, 12W Max
XT-60 output: 13V⎓10A, 130W Max
Total output: 1,707 W Max
AC input: 900 W Max 220-240 Vac, 50 Hz/60 Hz
PV input: 16-60V⎓10A, 400W Max
Vmax PV (absolute maximum): d.c. 60 V
Total input: 1,300 W Max
Battery connection power: 1,920 W (48 V, 40 A)
Hub connection power: 1,920 W (48 V, 40 A)
Operating temperature: -20℃ to 45℃
IP protection rating: IP31
Wireless connectivity: Bluetooth, Wi-Fi
Dimensions: 326×200×108 mm
Weight: 4 kg
With the Zendure ACE 1500 you are perfectly equipped for any situation – at home, outdoors or in emergencies. Experience reliable and flexible energy supply that gives you freedom and security.
The GoodWe HCA G2 11 kW is a smart wallbox with a 7.5 m cable for charging electric vehicles that works together with PV systems. It enables targeted use of solar energy or, if required, switching in of the grid. It is suitable for households with a PV system that want to charge at home. A Type 2 plug cable and RFID card are included in the scope of delivery.HighlightsSmart phase switching: Maximises the use of solar power, single-phase or three-phase operationCharging modes: PV priority, grid use or a combination as well as scheduled chargingCommunication: WLAN, RS485 and LAN with app integrationAccess control: RFID authentication, dynamic load managementProtection functions: Residual current, overvoltage and overcurrent protection, emergency stopOutdoor use: Robust IP66 housingTechnical specificationsDesignationValueCharging power11 kWGrid connection3-phaseProtection ratingIP66CableType 2, 7.5 mDimensionsL: 170 mm, W: 208 mm, H: 450 mmWeight5.6 kgCommunicationWLAN, RS485, LANScope of delivery1x GoodWe HCA G2 11 kW wallbox with 7.5 m cable1x RFID cardWho is it for?The wallbox is intended for electric vehicle owners who want to charge their vehicle at home with up to 11 kW while integrating PV power. The wallbox supports dynamic load management and several charging modes and can be integrated intelligently into various scenarios. The HCA G2 series is designed for single-phase or three-phase operation.Good to knowA wallbox should be installed by a qualified electrician.We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
The Sungrow Single Phase Smart Energy Meter - an innovative and reliable solution for monitoring and managing your energy consumption. Designed for residential use, the Sungrow Single Phase Smart Energy Meter provides accurate, real-time monitoring of your power consumption, delivering valuable insights to optimize your energy use and make informed decisions.
Equipped with advanced features and a user-friendly interface, this intelligent energy meter lets you take control of your energy consumption. Thanks to secure communication protocols and seamless integration options, installation and compatibility with existing energy management systems are a breeze.
Monitor, analyze and optimize your energy consumption with the Sungrow Single Phase Smart Energy Meter - a reliable, intelligent and efficient solution.
ValkBox3 mounting system for flat-roof mounting up to panel width 1150 mm
The mounting system was developed specifically for flat roofs and is made of high-quality components. The single element allows one solar panel to be mounted and is very easy to install. Anyone who has to install their modules on a roof with many obstacles will appreciate the sophisticated design. The system is supplied as a kit that is ready to mount directly, which means shorter installation times.
Supplied as a kit ready for direct mounting
Tilt angle of 17 degrees
Quick mounting thanks to pre-assembly of essential components
NOTE: Ballast is not included in the scope of delivery - for example paving slabs are suitable (30 x 30cm; 40 x 40cm )
Technical specifications:
For one panel in landscape mounting up to panel width 1150 mm
Tilt angle of 17 degrees
Developed in accordance with European standards
Suitable for panel dimensions: length approx. 2280 mm, width maximum 1150 mm
Scope of delivery:
Mounting kit for one (1) solar panel
2 x aluminium supports4 x connectors5 x short screws5 x long screws9 x nuts3 x cable holders4 x rubber pads
The Zendure SolarFlow 2400 AC+ is an AC-coupled storage system for existing photovoltaic systems. It is suitable for retrofitting without interfering with the existing PV module wiring and increases the use of self-generated solar power. The system is monitored via Wi-Fi, Bluetooth and the Zendure app. The variant with Smart Meter D0 adds a measuring device to the set.
Highlights
Integrated storage: LiFePO4 battery with 2400 Wh rated energy, expandable with compatible Zendure expansion batteries
Flexible power: 800 W standard output power, up to 2400 W Premium under suitable conditions
Retrofittable: AC coupling for existing PV systems
Connected: Wi-Fi, Bluetooth and app control
Robust: Protection rating IP65 with off-grid connection
Technical specifications
Designation
Value
Battery type
LiFePO4
Rated energy
2400 Wh
Rated capacity
50 Ah
Rated battery voltage
48 V DC
AC output power
800 W standard, 2400 W Premium
Max. AC input power
3200 W
Off-grid output power
3200 VA
Max. charge/discharge power
2400 W
Operating temperature
-20 °C to 55 °C
Protection rating
IP65
Communication
Bluetooth 5.0, Wi-Fi 4
Dimensions / weight
326 x 294 x 251 mm / 27.8 kg
Scope of delivery
Variant 1: 1x Zendure SolarFlow 2400 AC+ storage, 1x connection cable
Variant 2: additionally 1x Smart Meter D0
Who is it for?
The system is aimed at households with an existing PV system that want to optimise their self-consumption and retrofit storage without interfering with the module wiring.
Good to know
When operated as a plug-in balcony power plant, the feed-in power is limited to 800 VA; throttling is carried out via app or software. Full power is only available for registered systems or in storage mode, in line with the requirements of your grid operator. Balcony power plants must be registered in the Marktstammdatenregister (German market master data register, MaStR).
We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by email at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
Optimize your solar installation with our solar connectors, compatible with MC4 EVO 2.
These waterproof and dustproof connections are ideal for connecting your solar panels safely and efficiently. With corrosion-protected ends and excellent aging and weather resistance, these connectors are designed for long-term use.
Compatible with a wide range of cable diameters, they are the perfect choice for your solar projects.
High-quality solar connectors: These connectors offer a reliable solution for connecting your solar panels safely.
Waterproof and dustproof: With IP67 waterproofing, these connectors are ideal for use in demanding environments.
Corrosion protection: The ends of the connectors are specially treated to prevent corrosion, which extends their service life.
Versatile compatibility: Suitable for cable diameters from 2.5mm² to 6mm², including AWG13/12/11/10.
Brand quality: From the renowned brand PVMC, these connectors stand for quality and reliability.
Technical specifications: With a rated voltage of 1500V DC and a rated current of 30A, these connectors are suitable for most solar applications.
Safety standards: Certified to CE and with a flame retardancy rating of UL94-V0, you can rely on the safety of these connectors.
Easy handling: With a mating force of less than 50N and a pull-out force of at least 50N, these connectors are easy to install and use.
Durable material: Made of PPO/PPE, these connectors offer excellent aging and weather resistance.
Optimal connection size: With an adapter wire of 5-7mm, these connectors fit most solar installations perfectly.
The Hoymiles HMS-1600-4T is a microinverter of 4-in-1 design: up to four PV panels with independent MPPT control and monitoring can be connected to one microinverter. The rated power is 1600 VA. Communication runs via the wireless Sub-1G solution to the Hoymiles gateway.
Highlights
4-in-1: Up to four modules on one device, quick installation and lower costs
4 MPPTs: Independent MPPT control per panel for higher yield and easier maintenance
Grid-supportive: Reactive power control according to EN 50549-1:2019 and VDE-AR-N 4105:2018
Safe: Rapid-shutdown compliant, galvanically isolated via HF transformer
Monitoring: Sub-1G radio, monitoring via the S-Miles Cloud
Technical specifications
Description
Value
Rated output power
1600 VA
Common panel output
320 to 540+ W
Max. input voltage
65 V
MPPT voltage range
16-60 V
Start-up voltage
22 V
Max. input current
4 × 14 A
Max. input short-circuit current
4 × 25 A
Number of MPPTs
4
Rated output current (230 V)
6.96 A
CEC peak efficiency
96.7%
Protection rating
IP67
Dimensions (W × H × D)
331 × 218 × 40.6 mm
Weight
5.56 kg
Ambient temperature
-40 to +65 °C
Who is it for?
The HMS-1600-4T is suitable for PV systems with up to four panels per device in which each panel is to be controlled individually. The number of devices per connection line depends on the cable cross-section and local requirements. A Hoymiles gateway (DTU) is required for monitoring.
Good to know
Installation and grid connection should be carried out by a qualified electrician; registration obligations depend on the requirements of your grid operator.
We will gladly advise you personally on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
The Viessmann Vitovolt 300-DG M460 AT Full Black is a monocrystalline photovoltaic module from the Vitovolt 300-DG series with a rated power of 460 Wp. The series combines bifacial N-type TOPCon cell technology with a robust glass-glass construction, so that sunlight on both the front and the rear can be used to generate electricity. With a module efficiency of 23.0 percent, the M460 AT offers high area efficiency for residential and commercial photovoltaic systems. The 96 half-cut solar cells are set in a black anodised aluminium frame and, together with the full black design, give the module a uniform appearance. Two toughened anti-reflective glass panes, each 2 mm thick, protect the cells and support the module's high mechanical load capacity. The Vitovolt 300 series also stands for tested quality, positive power tolerances and a construction designed for the long-term operation of photovoltaic systems.
460 Wp rated power at 23.0 percent module efficiency
Bifacial N-type TOPCon half-cell technology
Full black glass-glass module with black aluminium frame
The Vitovolt 300-DG M460 AT Full Black combines high output with bifacial cell technology and a durable glass-glass construction. With 460 Wp and 23.0 percent efficiency, it is suitable for high-performance photovoltaic systems with a uniformly black module appearance.
Scope of delivery: 1x Viessmann Vitovolt 300-DG M460 AT Full Black solar panel
The HUAWEI Back Up Box B0 is a backup power module for single-phase Huawei inverters of the L1 series. In the event of a grid failure, the inverter switches to off-grid operation and supplies loads with power in backup mode. It is aimed at operators of rooftop PV systems with a Huawei inverter who want an emergency power supply.
Highlights
Emergency power supply: Single-phase backup circuit with up to 5.0 kVA
Automatic switchover: Detects grid failures and switches to the battery, switchover time under 3 s
Compatible: With single-phase Huawei inverters of the L1 series (SUN2000-2/3/3.68/4/4.6/5/6KTL-L1)
Protection rating IP65: Robust housing
Grid-connected and off-grid operation: Controls the status of the single-phase inverters of the L1 series
Technical specifications
Description
Value
Grid connection
single-phase
Maximum backup power
5.0 kVA
Maximum current
22.7 A
Rated voltage
220 VAC / 230 VAC
Rated frequency
50 Hz / 60 Hz
AC voltage range
198 VAC – 253 VAC
Switchover time
< 3 s
Compatible inverters
SUN2000-2/3/3.68/4/4.6/5/6KTL-L1
Operating temperature range
-20 °C to +45 °C
Dimensions
400 x 350 x 130 mm
Weight
11.00 kg
Water resistance
IP65
Who is it for?
The Backup Box suits single-phase Huawei inverters of the L1 series (not for the three-phase M1 series). When installed outdoors, it should not be exposed to direct sunlight; a sheltered location or a cover is recommended. An SPD surge protection device must be installed on the grid side. You should leave the installation to a qualified electrician. In rooftop PV systems, the Backup Box controls the grid-connected and off-grid status of the inverters. Before buying, please check whether your inverter model is on the compatibility list in the technical specifications.
We will gladly advise you personally on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
This Balcony Power Plant Pro+ (plug-in solar system) combines four Viessmann Vitovolt 300-DG M500WT panels with the Zendure SolarFlow 800 Pro 2, which integrates a 1.92 kWh LiFePO4 storage unit. Together, the panels reach 2,000 Wp, and the grid-connected AC output power is up to 800 W. It is suitable for anyone who wants to generate solar power and store it directly.
Highlights
2,000 Wp: Four bifacial glass-glass panels of 500 Wp each, panel efficiency 22.5 percent
Integrated storage: 1.92 kWh LiFePO4
4 MPPT inputs: 2,640 W total PV input power
Expandable: Up to five compatible additional batteries, 11.52 kWh in total
App control: Zendure app and AI-assisted energy management
Technical specifications
Designation
Value
Total output
2,000 Wp
AC output power
maximum 800 W
Storage capacity
1,920 Wh
PV input power
maximum 2,640 W
MPPT inputs
4
PV voltage range
14 to 55 V DC
Protection rating of SolarFlow
IP65
Dimensions of SolarFlow
392.7 x 236.3 x 276 mm
Weight of SolarFlow
22.6 kg
Panel dimensions
1,961 x 1,134 x 30 mm
Panel weight
27 kg
Scope of delivery
4x Viessmann Vitovolt 300-DG M500WT solar panel of 500 Wp each
1x Zendure SolarFlow 800 Pro 2 with integrated 1.92 kWh storage
Who is it for?
The set is aimed at households looking for a balcony power plant and storage in one package. The additional batteries must be compatible with the SolarFlow 800 Pro 2. The four separate MPPT inputs allow separate power tracking of the four Viessmann panels; monitoring and scheduling of charging and discharging are done via the Zendure app.
Good to know
Balcony power plants should be registered in the Marktstammdatenregister (German market master data register, MaStR); the feed-in limit is 800 W, with details depending on the grid operator.
We are happy to advise you personally on selection and use: by phone at +49 931 760 260 40 or by email at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
The Hoymiles HMS-2000-4T is a compact microinverter for solar power generation with up to four solar panels. It weighs only 5.56 kg and, according to the description, is suitable for long operating hours and a wide range of PV panel applications. It is aimed at operators of balcony power plants and small PV systems.
Highlights
Up to four modules: Suitable for panels with an output of 400W to 670W+ each.
Wide input range: Low start-up voltage (only 22V) and DC input range of the operating voltage of 16-60V.
More safety: Compared with the predecessor model of the HM series, with rapid shutdown and isolated transformer.
Stable communication: New Sub-1G wireless solution for connection to the Hoymiles DTU gateway.
High efficiency and warranty: Peak efficiency of 96.5% and 12 years' product warranty.
Outdoor use: Housing to protection rating IP67.
Technical specifications
Description
Value
Recommended panel output
up to 400W - 670+ W (per panel)
MPPT voltage range
16-60V
Start-up voltage
22V
Maximum input voltage
65V
Maximum input current
4*16A
Rated output power
2000VA
Rated output voltage/range
230V / 180-275V
CEC peak efficiency
96.50%
Ambient temperature range
-40°C - +65°C
Dimensions (WxHxD)
331 x 218 x 40.6 mm
Weight
5.56kg
Housing rating
IP67
Scope of delivery
1x Hoymiles HMS-2000-4T microinverter
Who is it for?
The microinverter is suitable for systems with up to four panels. Optionally, monitoring via the S-Miles app or S-Miles Cloud is possible; this requires a DTU Lite-S, and changing settings requires a DTU Pro-S.
Good to know
The system must be registered in the Marktstammdatenregister (German market master data register, MaStR); depending on the grid operator, additional requirements apply, for example regarding the feed-in limit of 800 W. Please inform yourself with your grid operator before installation.
We will gladly advise you personally: phone +49 931 760 260 40 or e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
Increase the efficiency and aesthetics of your installations with our high-quality roof cable entry - Made in Germany!
Whether for cars, motorhomes, home & garden or solar applications, this roof cable entry offers a safe and stylish solution for cable routing.
With its aerodynamic shape and the color options of classic black and elegant white, it blends seamlessly into any design.
Made from robust acrylonitrile styrene acrylate (ASA), it is resistant to UV rays, weather influences and temperature fluctuations.
Maximize the efficiency of your Betteri BC01 installations with our specially developed tool from Solarion!
This opener key adapter makes it easy to release the Betteri BC01 connector from the cable.
Made in Germany from robust PLA+ material, this tool stands for quality, durability and reliability.
Special tool for Betteri BC01: This tool was specially developed to release the Betteri BC01 connector from the cable easily and safely.
High-quality workmanship: Made in Germany, this product stands for the highest quality and manufacturing standards.
Robust material: Made from PLA+, a durable and robust material that offers both flexibility and strength.
Versatile applications: Ideal for boat/motorhome/vehicle, electronics and home/garden applications.
Brand quality: From the renowned brand Solarion, this tool stands for quality and reliability.
Technical data: The tool is moisture-resistant, corrosion-resistant, rust-resistant, mold-resistant, dust-tight, waterproof and weatherproof, which makes it ideal for a wide range of applications and environments.
Easy handling: The tool is designed to sit comfortably in the hand and allows easy operation.
Safe and reliable: Thanks to its resistance properties, you can rely on this tool to work reliably even under demanding conditions.
The AIKO Solar 490W Black Frame Dual Glass A490-MCE54Dw 3P+54 is a bifacial glass-glass solar panel of the Neostar-3P+54 series with N-type ABC (All Back Contact) cell technology and a black anodized aluminium frame. It delivers 490 Wp. According to AIKO, the series is designed for low degradation and stable yields.
Highlights
490 Wp: Rated power Pmax of the panel, manufacturer number AIKO-A490-MCE54Dw
ABC cells: All-back-contact technology with high power per area
Glass-glass: Double glass 2.0 mm + 2.0 mm, bifacial design, black anodized frame
Warranty: Product warranty of up to 25 years (according to AIKO warranty terms), 30-year linear performance warranty
Temperature behaviour: Temperature coefficient Pmax -0.26 %/°C according to AIKO series data
Technical specifications
Description
Value
Rated power Pmax
490 Wp
Cell type
N-type ABC
Design
Glass-glass (2.0 mm + 2.0 mm), bifacial
Frame
Black anodized aluminium
Dimensions
1762 × 1134 × 30 mm
Weight
24.2 kg
Cable
4 mm², approx. 1200 mm
Connector
MC4 (original)
Temperature coefficient Pmax
-0.26%/°C
Product warranty
up to 25 years
Performance warranty
30 years, linear
Packaging
37 pieces per pallet
Scope of delivery
1x AIKO Solar 490W Black Frame Dual Glass A490-MCE54Dw 3P+54 solar panel
Who is it for?
The panel is suitable for residential and commercial roof systems with limited space, where performance and longevity are the priority. It is available as a single panel or on a pallet (37 pieces). We will gladly send you the manufacturer's data sheet on request for electrical characteristics such as voltages and currents.
Good to know
Installation and grid connection should be carried out by a qualified electrician; registration obligations depend on the requirements of your grid operator.
We will gladly advise you personally on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
The KOSTAL Smart Energy Meter (KSEM) is an energy meter with a wide range of functions. Thanks to additional computing power in the device, it is technically prepared for future functions and tasks and offers the optimal solution for all KOSTAL inverters.
A major advantage of the KSEM is the standard pre-configuration for the PLENTICORE plus, PIKO IQ and PIKO MP plus. This means direct installation is possible without adjusting parameters or making further settings.
KOSTAL Smart Energy Meter: optimal use of energy
The KOSTAL Smart Energy Meter enables optimal use of energy in the household. With the energy meter, 3-phase energy measurement takes place in real time. The measurement data is transmitted to the inverters via standard interfaces.
This allows the KSEM to support the energy management of KOSTAL PLENTICORE plus, PLENTICORE BI, PIKO IQ and PIKO MP plus inverters. In combination with a PIKO 4.2 - 20 or PIKO 36 EPC, the KOSTAL Smart Energy Meter is a replacement for the PIKO BA Sensor.
The inverters can be set up in the KOSTAL Smart Energy Meter with the aim of maximizing solar self-consumption and displaying own/household consumption in the solar portal. For this, the KOSTAL Smart Energy Meter must be integrated into the KOSTAL Solar Portal.
The Growatt MIC 2000TL-X2 is a single-phase grid-connected inverter for solar modules in residential and small commercial buildings. The MIC 2000TL-X2 is a high-quality inverter that, thanks to its robust housing, can withstand a wide variety of environmental factors.
Features of the Growatt MIC 2000TL-X2 inverter
This Growatt inverter has a compact and lightweight design that allows easy installation and maintenance. Some of the most important features of the Growatt MIC 2000TL-X2 are:
High efficiency: The inverter has a high efficiency of up to 97.5%, which means that 97.5% of the energy generated can actually be used.
Flexible installation: The compact design and low weight of the inverter make the Growatt MIC 2000TL-X2 easy to install, even in tight spaces.
Advanced monitoring: The inverter has advanced monitoring options with which energy generation and other system performance can be tracked in real time.
Built-in WLAN: The inverter has built-in WLAN, so that data and system settings are easily accessible via a smartphone, tablet or computer.
Multiple safety systems: The inverter is equipped with several safety measures, including surge protection and overcurrent protection, which ensures the safety of the system.
With the THOR 11AS-P-V1 (WIFI) model, the Growatt THOR series presents an intelligent three-phase AC charging station developed with advanced technology to supply electric vehicles with power efficiently. This charging station stands out for its user-friendly interface, combined with versatile functions such as control, billing and various communication options for a seamless connection to back-office servers. This allows users to easily make reservations and process payments via the dedicated mobile app.
Features of the Growatt THOR 11AS-P-V1 (WIFI)
Universal compatibility: The Growatt THOR 11AS-P-V1 charging station is designed to work with all makes of electric vehicles, giving users flexibility in their choice of vehicle.
Integration of renewable energy: Charging can be integrated into both existing and newly installed photovoltaic systems. This allows users to benefit from 100% renewable energy, in particular by using surplus solar energy.
Intelligent app control: Thanks to the app, users can easily manage and schedule charging sessions, giving them full control over the charging process.
Robust design: With a IP65 rating, this charger is designed for both indoor and outdoor use.
Optimize your solar installation with the solar connector 2-way splitter T2-1! Compatible with MC4.
This T-splitter, fitted with solar connectors, allows the seamless connection of two PV panels to a single line. With an impressive rated voltage of 1000 V DC, IP68 waterproofing and a robust pull force of at least 50 N, it is ready for any weather and any requirement.
Made from high-quality PPO/PPE material and with a UL94-V0 flame retardancy rating, it is the safe and efficient choice for your solar projects.
Solar connectors: The splitter has female and male solar connectors, which ensure a safe and reliable connection.
High-quality brand: Made by PVMC, a renowned manufacturer in the solar industry, known for quality and reliability.
Technical specifications: With a rated voltage of 1000 V DC and a rated current of 30 A, this splitter is suitable for high-power solar applications.
Robust waterproofing: Thanks to its IP68 waterproofing, this splitter is both waterproof and dust-tight, which makes it ideal for outdoor use.
High-quality material: Made from robust PPO/PPE material, which is known for its durability and reliability.
Certified safety: The splitter is CE-certified, has a UL94-V0 flame retardancy rating and belongs to protection class II, which confirms its compliance with strict safety standards.
Strong pull force: With a pull force of at least 50 N, this splitter is robust enough to withstand the demands of installations in challenging environments.
The Growatt MIC 2500TL-X2 (EU model) is a single-phase, lightweight and compact inverter for domestic use. It offers several protection functions and works without a mechanical fan. It is therefore aimed at homeowners who want to run a small photovoltaic system with an uncomplicated inverter.Highlights
Lightweight and compact: At just over 6 kg, the inverter can, according to the description, be set up by a single installer.
Safety functions: DC reverse polarity protection, DC switch and surge protection on both sides.
AFCI optional: Arc fault protection (Arc Fault Circuit Interrupter) is available as an option.
Natural convection cooling: There are fewer moving parts, which reduces maintenance effort and the risk of malfunctions.
One MPPT: With a start-up voltage of 50 V and a nominal voltage of 360 V.
Technical specifications
Designation
Value
Model
MIC 2500TL-X2 (EU model)
Maximum DC voltage
550V
Start-up voltage
50V
Nominal voltage
360V
MPPT
1 (one string), max. input current 16 A
Weight
just over 6 kg
Cooling
natural convection
Who is it for?The inverter is designed for domestic use. The system must be registered in the Marktstammdatenregister (German market master data register, MaStR); additional requirements apply depending on the grid operator. Installation and grid connection should be carried out by a qualified electrician. With natural convection cooling instead of a mechanical cooling system, it requires particularly little maintenance.We are happy to give you personal advice: phone +49 931 760 260 40 or e-mail kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
First consider what you are planning: a balcony power plant (plug-in solar system), a roof system or retrofitting a battery. Then choose panels, inverters and accessories that match each other. The subcategories help you narrow down.
Among other things, we carry solar panels, inverters from Hoymiles, Growatt, SMA, Fronius and Huawei, battery storage from Zendure, Anker and BYD, as well as mounts, cables and wallboxes (EV chargers). The range extends from small parts to complete systems.
For each subcategory you will find tips on choosing. If you are planning a complete system, consider panels, inverter, storage and mount together so that power, voltage and fastening fit together. You will find further answers in our PV and solar FAQ. Grid registration and connection belong in the hands of a qualified electrician.
For personal advice, contact us on +49 931 760 260 40 or by email at kontakt@energie24.shop.
Frequently asked questions
Where do I start?
With a question about your needs: how much electricity do you use, and where should the system go?
Do you also advise on system design?
Yes, by phone or email.
Do I have to register my system?
That depends on the type of system. Inquire with your grid operator and the Bundesnetzagentur (German Federal Network Agency).
