From a small socket to a home battery: this overview brings together the photovoltaic range of Energie24.Shop. It is a good starting point if you want to get an overview.
The Fronius Datamanager is a versatile communication panel for Fronius inverters. By connecting to the internet via a LAN or WLAN interface, the "Fronius Datamanager" transmits the values of a photovoltaic system directly to the online portal "Fronius Solar.web", so that you have full control over the operation of the system at all times. With the Fronius Datamanager, inverters can be connected directly to the internet via a WLAN interface for the first time. Optimal monitoring of system operation and configuration of the Fronius Datamanager are possible via a dedicated web interface on the server integrated into the device.
HOYMILES DTSU 666
The DTSU meter has an LCD display, performs bidirectional measurement and is installed on a DIN rail.
Technical specifications:
Operating range: -25 °C to +55 °C
Protection rating: IP20
Dimensions: 98 x 65 x 72 mm
Weight: 0.4 kg
RS485 communication
LCD display
CT transformers
Product specification:
Maximum power of the connected photovoltaic system: 470W
DC start-up voltage: 22V
Maximum input current: 6 * 11.5 A
Maximum AC power: 2250W
Sealing class: IP67
Standard manufacturer's guarantee: 12 years
Option to extend the warranty to 25 years (price: 30% of the product value)
The Growatt MIN 2500TL-XH2 belongs to the single-phase MIN 2500 to 6000TL-XH2 series for residential photovoltaic systems. The series is designed to be battery ready and allows a compatible Growatt high-voltage storage system to be integrated later. The model provides 2,500 W AC rated power and supports a recommended PV generator power of up to 5,000 W. Two independent MPP trackers with 16 A input current each allow flexible design on different roof areas. The inverter achieves a maximum efficiency of 98.2 percent, while the series reaches up to 98.4 percent depending on the power class. The compact IP66 housing, natural convection cooling and the integrated Type II surge protection on the DC side support reliable operation.Battery ready for compatible Growatt high-voltage storage systems2 MPP trackers with up to 16 A input current each2,500 W AC rated power with up to 98.2 percent efficiencyThe Growatt MIN 2500TL-XH2 is a compact single-phase hybrid inverter for smaller photovoltaic systems. It combines flexible PV design with storage capability, modern monitoring and a weather-protected housing.Scope of delivery: 1x Growatt 1PH Hybrid Inverter MIN 2500TL-XH2
The Growatt MIC 1000TL-X2 is a single-phase string inverter from the Growatt MIC-X2 series for small private PV systems. The series is designed for a compact design, simple mounting and quiet operation thanks to natural convection cooling. The model offers 1000 W AC rated power and, according to the manufacturer, is intended for a recommended PV power of 1500 W. With one MPP tracker, 50 V start-up voltage and 500 V maximum DC voltage, the inverter is suitable for smaller module strings. The IP66 housing allows protected use indoors and outdoors. OLED display, touch operation, RS485 and USB as well as optional communication modules support simple monitoring of the system.
1000 W AC output with 1500 W recommended PV power
1 MPP tracker with 16 A input current
IP66 housing, OLED display and natural convection cooling
The Growatt MIC 1000TL-X2 is a compact solution for small single-phase PV systems with one module string. The MIC-X2 series combines simple installation, solid protection functions and flexible monitoring options for private solar systems.
Scope of delivery: 1x Growatt MIC 1000TL-X2 inverter, 1x mounting bracket, 1x Quick Guide, 1x signal connector
The Growatt MIC 800TL-X2 is a compact single-phase string inverter with 800 W AC rated power and one MPP tracker. It is transformerless, convection-cooled and has an OLED display with touch button.
Highlights
Compact: Weighs only 6 kg, housing with protection rating IP66.
High input current: One MPP tracker with up to 16 A input current.
Efficiency: Maximum 97.4%, European efficiency 96.5%.
Safety: DC isolating switch, reverse polarity protection, Type III surge arrester and residual current monitoring.
AFCI function: Arc detection available, to be activated after installation.
Communication: RS485 and USB integrated; WLAN, GPRS, RF or LAN optional.
Technical specifications
Designation
Value
AC rated power
800 W / 800 VA
Max. PV power (STC)
1200 W
Max. input voltage
500 V
Start-up voltage
50 V
MPPT voltage range
50–500 V
Max. input current per tracker
16 A
AC rated voltage
230 V (180–280 V)
Max. efficiency
97.4%
Operating temperature
-30 to +60 °C
Dimensions (W x H x D)
274 x 254 x 138 mm
Weight
6 kg
Warranty
10 years
Scope of delivery
1× Growatt MIC 800TL-X2 inverter
1× mounting bracket
1× Quick Guide
1× signal connector
Who is it for?
For small private PV systems with a single-phase grid connection and one module string of up to approximately 1200 W, where a quiet, low-maintenance inverter with monitoring options is desired.
Good to know
Connection and commissioning must be carried out by a qualified electrician; registration with the grid operator and in the Marktstammdatenregister (German market master data register, MaStR) is the operator's responsibility.
We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop.
The ABL Pulsar 11 kW (100000446) is a wallbox with a permanently attached Type 2 charging cable (approx. 5 m) for charging at home. It is operated via Wi-Fi or Bluetooth with the free Wallbox app and supports OCPP 1.6. The charging power is up to 11 kW three-phase.
Highlights
Charging power: 11 kW three-phase, 3.7 kW single-phase at 16 A
App and network: Setup via Wi-Fi or Bluetooth; OCPP 1.6 for external systems
Charging management: Solar charging and dynamic load management with the optional Energy Meter Pulsar
Robust and safe: Protection rating IP55, impact resistance IK10, integrated DC residual current detection (≥ 6 mA)
Billing: Optional MID Meter Pulsar for company car billing
Technical specifications
Designation
Value
Product number
100000446
Maximum charging power
11 kW (3-phase), 3.7 kW (1-phase)
Rated current
16 A
Rated voltage
230 / 400 V (3-phase)
Charging cable
permanently attached, Type 2, approx. 5 m
DC residual current detection
≥ 6 mA
Protection rating / impact resistance
IP55 / IK10
Communication
Wi-Fi, Bluetooth, OCPP 1.6
Dimensions (H × W × D)
201 × 198 × 99 mm
Weight (net)
approx. 4.16 kg
Operating temperature
-30 to 50 °C
Energy meter
not integrated (optional Energy Meter Pulsar, MID Meter Pulsar)
Scope of delivery
1x ABL Pulsar wallbox
Printed installation guide
Plug holder
Mounting kit
User information
Who is it for?
The wallbox is suitable for private households and small businesses with an 11 kW connection that want to charge an electric vehicle at home. An integrated energy meter is not included; for consumption recording or solar charging you need the optional Energy Meter. The wallbox is designed for wall mounting; the optional POLE Pulsar Eiffel Basic stand allows floor-standing installation.
Good to know
An upstream fuse of 16 A (C characteristic recommended) must be provided on site. Installation and grid connection should be carried out by a qualified electrician; registration obligations depend on the requirements of your grid operator.
We are happy to advise you personally on selection and use: by phone at +49 931 760 260 40 or by email at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
The GoodWe HCA G2 22 kW (with 7.5 m cable, WLAN / RFID control) is a three-phase AC EV charger that integrates seamlessly into PV storage systems and supports both PV-priority charging and grid charging. It uses dynamic phase switching to distribute solar power optimally and enables intelligent charging modes such as scheduling, surplus charging or combined operating mode (PV + grid) via the GoodWe SEMS+ app. RFID and app authentication are available for access control, ideal for rental, company or shared users. It is weatherproof (protection class IP66) for outdoor installation and can be used wall-mounted or pole-mounted. The network interfaces include WLAN, LAN, RS485, plus communication with the PV system for load control and dynamic balancing.Dynamic phase switching to maximise the share of solar powerRFID / app control for user access and cost billingWLAN, RS485 and LAN communication with PV integrationThe GoodWe HCA G2 22 kW charger is a PV-integrable, three-phase AC charger with RFID / app control and intelligent charging modes. It is weather-protected (IP66) and supports dynamic load balancing to optimise system efficiency.Scope of delivery: 1× GoodWe HCA G2 wallbox 22 kW, 1× permanently connected 7.5 m charging cable (Type 2), 1× RFID card set
The GoodWe GW15K-ET-20 is a three-phase high-voltage hybrid inverter of the ET G2 series with 15000 W rated power. It connects photovoltaics, battery storage and the grid and offers a backup power function for selected consumers. The information is taken from the series data sheet and refers to this model.HighlightsBackup: Switchover to emergency power in under 10 ms; backup rated power 15000 VAHybrid: Connection of a high-voltage battery storage system with 150 ~ 720 VFlexible: 3 MPP trackers with one string each; up to 160% PV oversizingExpandable: Parallel connection of up to 4 devices possibleRobust: Protection rating IP66, cooling by natural convection, Type II surge protection (DC and AC)Technical specificationsDesignationValueAC rated power15000 WNumber of MPP trackers3Max. PV input power24000 WMax. charge/discharge power24000 W / 16500 WBackup rated power15000 VABackup peak without grid18000 VA (60 s)Max. efficiency98.2%Battery voltage range150 ~ 720 VMax. DC input voltage1000 VMPPT operating voltage range120 ~ 850 VMax. input current per MPPT16 AProtection ratingIP66Operating temperature-35 ~ +60 °CDimensions (W × H × D)496 × 460 × 221 mmWeight25 kgScope of delivery1x GoodWe GW15K-ET-20 hybrid inverterWho is it for?The GW15K-ET-20 is aimed at homeowners with a three-phase grid connection who want to plan or expand a PV system with high-voltage storage. Important for planning: the battery input works in the range of 150 ~ 720 V; the battery is not included in the scope of delivery. According to the data sheet, the unbalanced output (up to 150%) is only supported by the GW6K, GW8K and GW10K-ET-20 models, not by this model. We are happy to help you with the string design.Good to knowInstallation and grid connection should be carried out by a qualified electrician; registration obligations depend on the requirements of your grid operator.We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
The GoodWe Lynx Home D 10 kWh is a modular high-voltage storage system made up of two stackable Lynx D modules of 5 kWh each. It uses LiFePO₄ cells and can be installed in a floor-standing design or optionally wall-mounted. It is aimed at homeowners with a GoodWe hybrid inverter who want to use energy management and emergency power functions. According to the description, the cell chemistry ensures high thermal stability. According to the data sheet, the rated power is 3 kW per module, with 5 kW possible for short periods (10 s).HighlightsModular: Two 5 kWh modules, flexibly expandable and combinable, including older and new modules togetherPlug and play: Modules are wired to one anotherLiFePO₄: High thermal stability and long service lifeWeatherproof: Protection rating IP66, suitable for indoor and outdoor installationIntegration: Works with GoodWe hybrid inverters for energy management and emergency powerTechnical specificationsDesignationValueUsable capacity10000 WhRated power3 kW per module; peak power 5 kW (10 s)Cell chemistryLiFePO₄Module size5 kWh each (2 modules)Protection ratingIP66InstallationFloor-standing design or optionally wall mountingScope of delivery1x GoodWe Lynx Home D 10 kWh high-voltage battery systemVariant with floor mount: additionally 1x floor plateWho is it for?The system is suitable for residential systems with a GoodWe hybrid inverter that want an expandable home storage system. The modules are wired to one another and allow flexible expansion. The variant with floor mount includes the floor plate; the variant without floor mount is supplied without one.Good to knowDepending on the grid operator, storage systems should be properly registered, including in the Marktstammdatenregister (German market master data register, MaStR). Installation should be carried out by a qualified electrician.We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
The GoodWe SMT series (e.g. GW80K-SMT) is a range of three-phase string inverters for commercial and industrial applications with high power density and six MPPTs. It supports DC input overvoltage of up to 150% (up to 180% depending on the model) and thus allows an oversizing design to increase yield. For safety, the device protects on both the DC and AC side with surge protection (Type II), supplemented by optional functions such as AFCI. The device is weatherproof according to protection class IP66 and suitable for outdoor mounting. Communication takes place via interfaces such as RS485, WiFi, LAN or 4G and offers options for remote monitoring and control via GoodWe platforms. The inverter is designed for high efficiency (up to 98.6%) and large PV modules (182/210 mm), which makes it attractive for modern large-scale systems.Six MPPTs for optimising several module stringsHigh efficiency of up to 98.6% with a robust protective design (IP66)DC input overvoltage (oversizing) of up to 150% / 180% (depending on model)The GoodWe GW80K-SMT is a powerful three-phase string inverter with high safety standards, high efficiency and flexible PV string configuration. It is designed specifically for commercial PV systems and supports oversizing as well as modern communication functions.Scope of delivery: 1x GoodWe GW80K-SMT inverter
The Fronius Reserva Module is a high-voltage battery module (LFP) for the DC-coupled Reserva storage family. With two to five modules and a BMS base module, towers of 6.3 to 15.8 kWh are created; it is matched to Fronius hybrid inverters. The information refers to the individual module according to the Fronius data sheet.
Highlights
3.15 kWh per module: Usable capacity per module, can be combined in towers of 2 to 5 modules
LFP chemistry: Lithium iron phosphate for high safety
DC coupling: Matched to Fronius hybrid inverters (except Fronius Symo Hybrid)
Parallel operation: Up to 4 batteries in parallel
Robust: Protection rating IP65, indoors and sheltered outdoor areas
Technical specifications
Designation
Value
Battery type
Lithium iron phosphate (LFP)
Usable capacity
3.15 kWh per module
Rated voltage
102.4 V per module
Max. output current
32 A
Max. charging/discharging power
2.24 kW
Dimensions (H × W × D)
250 × 772 × 176 mm
Weight
33.5 kg
Protection rating
IP65
Ambient temperature
-20 to +55 °C
Interface
RS485
Warranty
10 years according to data sheet
Scope of delivery
1x Fronius Reserva Module 3.15 kWh
Who is it for?
The module is intended for operators who use a Fronius hybrid inverter (for example GEN24 Plus) and want to build up or expand their storage system in a modular way. A BMS base module is also required for operation; the total voltage of a tower depends on the number of modules (for example 204.8 V with 2 modules).
Good to know
Installation and grid connection should be carried out by a qualified electrician; registration obligations depend on the requirements of your grid operator.
We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
The Fronius Reserva 9.5 is a high-voltage battery with 9.47 kWh of usable capacity from the modular Reserva storage family. It works in direct DC coupling with Fronius hybrid inverters and thus minimises conversion losses. It is aimed at operators of Fronius PV systems who are looking for a powerful home storage system.
Highlights
9.47 kWh usable: Built from three modules
DC coupling: Direct coupling with Fronius hybrid inverters for low conversion losses
LFP cell chemistry: Lithium iron phosphate for high safety and long service life
Modular: Expandable within the Reserva series
IP65: Suitable for sheltered outdoor areas and indoors
Technical specifications
Designation
Value
Battery type
Lithium iron phosphate (LFP)
Usable capacity
9.47 kWh
Number of modules
3
Rated voltage
307.2 V
Voltage range
278.4 V – 340.8 V
Maximum output current
32 A
Protection rating
IP65
Operating temperature
–20 °C to +55 °C
Dimensions (H × W × D)
1140 × 772 × 176 mm
Weight
120 kg
Parallel operation
up to 4 batteries
Scope of delivery
3× Fronius Reserva Module 3.15 kWh
1× Fronius Reserva BMS & Base
Who is it for?
The Reserva 9.5 is intended for homeowners with a Fronius hybrid inverter who want to increase their self-consumption. You should take its weight of 120 kg into account when planning the installation location. The battery can be expanded modularly within the Reserva series, and according to the description the temperature range ensures reliability even under changing ambient conditions.
Good to know
Depending on the grid operator, storage systems should be properly registered, including in the Marktstammdatenregister (German market master data register, MaStR). Installation should be carried out by a qualified electrician.
We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop. Pickup at our Veitshöchheim warehouse is possible by arrangement.
The SOSSEN microinverter with 800 W output power offers a powerful and reliable solution for balcony and small systems. Thanks to its compact design, high efficiency and modern communication interfaces, it is ideally matched to the requirements of contemporary photovoltaic systems.
With integrated Wi-Fi and Bluetooth, the inverter can be conveniently monitored via smartphone app (TUYA-compatible). Thanks to a maximum input current of 20 A, the device is particularly suitable for high-performance solar panels of up to 540 Wp.
The inverter meets all requirements of VDE-AR-N 4105 and is doubly protected by an integrated relay circuit. The IP67 protection rating ensures safe outdoor use in all weather conditions.
Product features:
800 W output power for grid-connected small systems and balcony power plants
Integrated Wi-Fi and Bluetooth function for convenient remote monitoring
Maximum 20 A PV input current, ideal for modern high-performance panels
MPP tracking efficiency of 99.5% for optimal energy yield
Double protection with integrated relay, compliant with VDE-AR-N 4105
Protection rating IP67, fully weatherproof and suitable for outdoor use
Fanless design – silent operation through natural convection
Compatible with the TUYA Smart Home app for real-time monitoring
Upgradable to 1000 W, future-proof through easy power adjustment
12-year manufacturer's guarantee for long-term investment security
Balcony Power Plant Platinum+ (plug-in solar system) with Zendure SolarFlow 800 Pro 2 & 2x Viessmann 460 Wp Panels – Compact, Storage-Ready, Future-Proof
Get the most out of your balcony power plant – with two powerful Viessmann Vitovolt solar panels of 460 Wp each in an elegant full-black design.
With an impressive total output of 920 Wp, the Gold+ set is ideal for anyone who wants to significantly increase their own electricity production and the savings that come with it. The high-quality Viessmann solar panels combine modern cell technology with an attractive, completely black look.
In combination with the Zendure SolarFlow 800 Pro 2, you get an intelligent all-in-one solution consisting of an energy storage unit and an integrated inverter. Surplus solar power is stored during the day and can then be used in the evening, at night or when sunlight is low.
Total output: 920 Wp, consisting of two Viessmann Vitovolt full-black solar panels of 460 Wp each.
Solar panels: High-quality monocrystalline Viessmann Vitovolt solar panels with modern cell technology for high energy yield and reliable performance.
Full-black design: Black solar cells, a black panel frame and a harmonious overall look ensure a particularly elegant appearance.
High performance: The high panel output enables efficient solar power generation even with limited mounting space.
Robust construction: Durable and weather-resistant glass-glass design for permanent outdoor use.
Storage and inverter: Zendure SolarFlow 800 Pro 2
The Zendure SolarFlow 800 Pro 2 combines a powerful balcony power plant storage unit with an integrated inverter. The system is conveniently controlled and monitored via the Zendure app.
Scope of delivery
2x Viessmann Vitovolt 300-DG M460 AT All-Black solar panel of 406 W each
1x Zendure SolarFlow 800 Pro 2 with integrated inverter and storage
Make yourself independent of the power grid - with the compact Balcony Power Plant Gold+ from Zendure & Viessmann. Ideal for a smart start into the solar future.
The KOSTAL PLENTICORE G3 is a transformerless inverter with 3 MPP trackers. It can be used universally as a solar, hybrid or battery inverter with base outputs of AC 4.0 (S) / 8.5 (M) / 15.0 kW (L).
The output can optionally be extended with 1 - 2x Plenticoin.The battery input can be added later with 3x Plenticoin via the 3th MPP tracker, which allows a compatible HV storage unit to be connected.
Prepared for additional battery charging via AC energy sources (e.g. for KOSTAL Double Power).
Emergency power operation can be implemented with the KOSTAL BackUp Switch G3 (08-000747) manual changeover switch or via the enwitec KOSTAL 3P 35kW (08-000772/773) grid changeover box.
4 digital outputs for load control or event signalling, SG Ready compatible Free monitoring via the KOSTAL Solar Portal and Solar AppWith the KOSTAL DC surge protection module G3 (08-000746), direct integration of a surge protective device is possible.
Here you will find the new generation: Growatt 1PH Inverter MIC 750TL-X2 – Energie24.Shop
The Growatt MIC 750-X is a lightweight and compact inverter for domestic use. The maximum DC voltage is 500V, with a start-up voltage of 50V and a nominal voltage of 120V. There is one MPPT with a maximum input of 13A. Safety is an important aspect, which is achieved through various features. These include a DC switch, surge protection and an option for AFCI. Lightweight and compact - At only 6 kg, it is a very lightweight inverter that is also quite compact. This means the inverter can be installed quickly and easily by a single installer, which saves time and money. Safety and reliability - The Growatt MIC 750-X has various safety features. There is DC reverse polarity protection, a DC switch and surge protection on both sides. AFCI, or Arc Fault Circuit Interrupter, is optional. Another feature that contributes to both safety and reliability is the use of natural convection cooling instead of a mechanical cooling system. There are fewer moving parts, which means less maintenance and a lower risk of malfunctions.
The Growatt SPH5000 BL-UP 1PH hybrid inverter is part of the SPH BL-UP series, a series of inverters that replaces the older SPH series. This new series consists of six single-phase models, namely:
SPH3000 BL-UP
SPH3600 BL-UP
SPH4000 BL-UP
SPH4600 BL-UP
SPH5000 BL-UP
SPH6000 BL-UP
Features of the Growatt SPH5000 BL-UP
The Growatt SPH5000 BL-UP 1PH hybrid inverter is suitable for solar systems with a maximum output of 8,600 W. The maximum output power of this hybrid inverter is 5 kW. The battery voltage range for a home storage system is between 42 and 59 V, which makes all Growatt HV lithium home storage systems compatible.
The Growatt SPH BL-UP series comprises single-phase hybrid inverters that are suitable for residential PV systems. The technology these inverters are equipped with ensures excellent integration of solar panels, storage systems and the power grid, which makes them a popular choice for many installers.
Advantages of the Growatt SPH5000 BL-UP 2 MPPTs to connect two panel strings to the inverter.
Natural cooling results in less noise.
User-friendly thanks to a built-in LCD screen.
Option to adjust charging and discharging capacities and times.
Access to the Online Smart Service via an app, the OSS system and a web server.
Compatible with the ShineLink-X series for monitoring.
These features make the Growatt SPH5000 BL-UP an intelligent and efficient choice for anyone looking for seamless integration of renewable energy technologies.
The Growatt MIN 5000TL-XH2 is a single-phase hybrid inverter with 5000 W AC rated power for PV systems with up to 10000 W of module power. It has two MPP trackers and is prepared for Growatt ARK XH and APX battery systems.HighlightsBattery-ready: Compatible with ARK XH (5.12–17.9 kWh) and APX 5.0-30.0P-S0 (5–30 kWh), discharge power up to 5000 W.Two MPP trackers: One string each with up to 16 A, MPP range 40–540 V.Efficiency: Maximum 98.4%, European efficiency 97.5%.Emergency power: Backup output with 5000 VA; according to the data sheet, a SYN 50-XH-10 is required for this.Housing: IP66, natural convection cooling, 10.8 kg.Protection functions: DC switch, grid and residual current monitoring, surge arresters Type II/Type III; AFCI optional.Technical specificationsDesignationValueAC rated power5000 W / 5000 VAMax. PV power (STC)10000 WMax. DC voltage550 VStart-up voltage50 VBattery voltage range360–550 VMax. charge/discharge power6000 W / 5000 WMax. output current22.7 AMax. efficiency98.4%Operating temperature-30 to +60 °CDimensions (W x H x D)375 x 350 x 160 mmWeight10.8 kgWarranty5 years (optionally 10 years)Scope of delivery1× Growatt 1PH Hybrid Inverter MIN 5000TL-XH2Who is it for?For residential buildings with a single-phase connection and a medium to larger PV system that plan to include a storage system.Good to knowConnection and commissioning must be carried out by a qualified electrician; registration with the grid operator and in the Marktstammdatenregister (German market master data register, MaStR) is the operator's responsibility.We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop.
Here you will find the new generation: Growatt 1PH Hybrid Inverter MIN 3000TL-XH2 – Energie24.ShopThe Growatt MIN 2500-6000TL-XH are single-phase inverters with two MPP trackers. These inverters have a maximum efficiency of 98.4%. The device has an integrated Type II surge protection device (SPD) on the DC side and active arc fault protection (AFCI). It is battery-ready and future-proof.
Pulsar Plus is the smallest powerful EV charging station from Wallbox. It fits anywhere and changes colour depending on the charging status, so you can see at a glance whether your car is still charging or ready to go. It is available with a variety of charging cables and current ratings and can therefore charge any electric car at up to 22 kW.
The myWallbox app makes home charging even easier. It lets you manage your charging station from any smart device via Wi-Fi and Bluetooth. You can control charging sessions, create schedules, receive notifications and much more. With Pulsar Plus you stay in control of thecharging process and set off every morning with a full battery.
The Growatt MID 50KTL3-X2 is a three-phase string inverter with 50000 W AC rated power and four MPP trackers. It is intended for large rooftop and ground-mounted systems with up to 75000 W of PV power.
Highlights
Four MPP trackers: 2 strings per tracker; maximum string input current 16 A.
Efficiency: Maximum 98.8%, European efficiency 98.5%.
Diagnostics: I/V curve scanning and intelligent string monitoring.
Safety: Type II surge arrester on the DC and AC side, AFCI function prepared.
Communication: RS485, USB; PLC, GPRS, 4G and Wi-Fi optional.
Housing: IP66, intelligent air cooling.
Technical specifications
Description
Value
AC rated power
50000 W
Max. AC apparent power
55500 VA
Recommended max. PV power (STC)
75000 W
Max. DC voltage
1100 V
Start-up voltage
250 V
MPPT voltage range
200–1000 V
Max. input current per tracker
32 A
Max. output current
84.1 A
Max. efficiency
98.8%
Dimensions (W x H x D)
580 x 435 x 230 mm
Weight
37 kg
Warranty
5 years (optional 10 years)
Scope of delivery
1× Growatt 3PH inverter MID 50KTL3-X2
Who is it for?
For commercial users, agriculture and system operators looking for a powerful three-phase string inverter for larger roof areas.
Good to know
Connection and commissioning must be carried out by a qualified electrician; registration with the grid operator and in the Marktstammdatenregister (German market master data register, MaStR) is the operator's responsibility.
We will gladly advise you personally on selection and use: by phone on +49 931 760 260 40 or by e-mail at kontakt@energie24.shop.
The Growatt MID 25KTL3-X inverter is part of the MID series, a series of three-phase Growatt inverters with a lighter and more compact design than their predecessors.
Growatt MID 25KTL3-X 25 kW
The Growatt MID 25KTL3-X 25 kW inverter has a maximum output power of 25,000 W. This device is compatible with systems up to a maximum size of 37.5 kWp. The inverter's maximum efficiency is measured at a maximum conversion efficiency of 98.5%. This efficiency applies to average weather conditions in Europe.
Features MID 25KTL3-X
The maximum output of the MID 25KTL3-X is supported by 3 MPP trackers. The inverter is supplied without a smart meter and can be used for self-supply or grid feed-in.
Safety
To ensure the safety of the system, the Growatt MID 25KTL3-X is equipped with the following integrated protective measures:
DC disconnect switch
DC and AC surge protection, type 2
AFCI protection
Protection class 66
This inverter communicates with other devices in the network via the following interfaces:
RS485
USB
WiFi (optional)
GPRS (optional)
LAN (optional)
First consider what you are planning: a balcony power plant (plug-in solar system), a roof system or retrofitting a battery. Then choose panels, inverters and accessories that match each other. The subcategories help you narrow down.
Among other things, we carry solar panels, inverters from Hoymiles, Growatt, SMA, Fronius and Huawei, battery storage from Zendure, Anker and BYD, as well as mounts, cables and wallboxes (EV chargers). The range extends from small parts to complete systems.
For each subcategory you will find tips on choosing. If you are planning a complete system, consider panels, inverter, storage and mount together so that power, voltage and fastening fit together. You will find further answers in our PV and solar FAQ. Grid registration and connection belong in the hands of a qualified electrician.
For personal advice, contact us on +49 931 760 260 40 or by email at kontakt@energie24.shop.
Frequently asked questions
Where do I start?
With a question about your needs: how much electricity do you use, and where should the system go?
Do you also advise on system design?
Yes, by phone or email.
Do I have to register my system?
That depends on the type of system. Inquire with your grid operator and the Bundesnetzagentur (German Federal Network Agency).
