Victron Energy is a renowned provider of energy solutions, known for its high-quality inverters and solar charge controllers. Victron products stand out for their reliability, easy integration into existing systems and their ability to handle high power peaks.
The Smartsolar MPPT 150/70-Tr VE.Can from Victron Energy (MPN SCC115070411) belongs to the latest generation of smart charge controllers from the Dutch premium manufacturer. The controller handles a full 70A of solar current and can work flexibly with 12/24/36/48V batteries. Ultra-fast power tracking and automatic power point detection under partial shading are just 2 of the many highlights of this new class of device. VE.Can is particularly suitable for systems with several solar chargers; up to 25 controllers can be synchronised with it. Compared with the BlueSolar series, the Bluetooth module of the Smartsolar family is already permanently integrated in the controller, which makes the Smart dongle unnecessary for this device. Also new is the optional LCD display, which can simply be plugged onto the SmartSolar 150/70-Tr VE.Can when needed. The display then provides all important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar charge controller. It safely covers the cable entries and connection terminals of the controller and protects them from external influences and accidental contact. About the SmartSolar MPPT 150/70-Tr VE.Can ultra-fast latest-generation MPP tracker ensures the best possible yield parallel operation with other VE.Can controllers Adjustable absorption and float charge voltage suitable for all AGM, GEL, lead-acid and lithium batteries fully programmable charging algorithms multi-stage and adaptive charging algorithm remote on/off switching integrated temperature sensor programmable relay optional LCD display available Smart data communication via VE.Direct and lightning-fast Bluetooth module Modern Apple and Android smartphones, tablets, MacBooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point under partial shading In the case of partial shading, two or more points of maximum power (MPP) can be present on the current-voltage curve. Conventional MPPTs tend to settle on a local MPP, which may not be the optimal MPP. The innovative algorithm of the SmartSolar device always maximises the energy yield by locking onto the optimal MPP. High-speed latest-generation MPP tracker Especially under overcast skies, when the light intensity changes constantly, an extremely fast MPPT controller increases the energy yield by up to 30 % compared with PWM charge controllers and by up to 10 % compared with slower MPPT controllers. Comprehensive electronic protection protection against reverse battery polarity PV reverse current protection protection against overheating of the device protection against short circuits protection against reverse PV polarity The VE.Direct data communication port In text mode, VE.Direct transmits all important parameters every second to other devices coupled to the charge controller, making communication with accessories such as the GX Color Control system panel possible. The VE.Direct port is intended for products where full CAN bus integration (VE.Direct) would cause excessive costs. You can find more information about VE.Direct in our Victron Energy brand shop. Technical specifications Rated charging current: 70A maximum PV open-circuit voltage: 150V high maximum efficiency of 98% Max. short-circuit current: 50A maximum PV power: 12V 1000W / 24V 2000W / 48V 4000W Protection class IP 43 (electronic components) and protection class IP 22 (connection area) Weight: 3kg Dimensions: 185 x 250 x 95 mm Scope of delivery1x Victron SCC115070411 SmartSolar MPPT 150/70-Tr 70A Charge controller
376,00 €
The Victron MPPT 75/15 (MPN SCC010015050R) belongs to the large family of BlueSolar MPPT charge controllers and, like its larger siblings, already offers ultra-fast power tracking and can thereby increase the yield of your solar system. Latest-generation MPP trackerEspecially under overcast skies, when the light intensity changes constantly, an extremely fast MPPT controller improves the energy yield by up to 30% compared with PWM charge controllers and by up to 10% compared with slower MPPT controllers. In addition, the 75/15 offers several other innovative technologies.Options for programming, real-time data and display of the history Modern Apple and Android smartphones, tablets, MacBooks and other devices can, for example, be connected via VE.Direct with the Bluetooth Smart dongle and the MPPT app or the GX Color Control. Please note that the Bluetooth Smart dongle and the GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as options.Key product features of the BlueSolar 75/15 15A 12V 24V MPPT ultra-fast latest-generation MPP tracker ensures the best possible yield even under overcast skies integrated VE.Direct data communication port for connecting to auxiliary devices such as the Bluetooth Smart dongle or the GX Color Control panel 12V 24V systems possible Rated charging current 15A 220W maximum PV power at 12V, 440W in 24V systems Load output rated at 15A with automatic load disconnect when battery undervoltage is imminent (deep-discharge protection) integrated protection against reverse battery polarity multi-stage and adaptive charging algorithm programmable battery charging algorithm integrated Battery Life algorithm extends the life of your batteries when it is active and all loads run via the load output on the controller day/night timer and light dimming option Integrated VE.Direct data communication portVE.Direct in text mode transmits all important parameters every second to other devices coupled to the charge controller and thus allows communication with auxiliary devices such as the Bluetooth Smart dongle or the Victron GX Color Control panel. The VE.Direct port is intended for products for which a full CAN bus integration (VE.Direct) would cause excessive costs. You will find more information about VE.Direct in our Victron brand world, in the information section.Battery Life algorithm helps to increase battery lifeIf the solar charge controller is unable to charge the battery to its full capacity within a day, the battery status constantly alternates between "partially charged" and "end of discharge". This operating mode (no regular full charging) is optimal for small lead batteries, and with lead-acid batteries in particular, such irregular charging and discharging leads to damage to the battery after only a few months, and its service life is in some cases shortened considerably.The Battery Life algorithm monitors the state of charge of the battery and, if necessary, raises the load disconnect threshold day by day (i.e. the load is disconnected earlier) until the energy gained is sufficient to charge the battery to almost 100%. From that point on, the load disconnect threshold is modulated so that charging to almost 100% is achieved about once a week.Scope of delivery1x Victron SCC010015050R BlueSolar MPPT 75/15 12V 24V 15A charge controller1x Operating manual
49,00 €
The Blue Smart IP22 24/16(1) charger from Victron Energy (MPN BPC241647002) is a professional, compact 24V 16A battery charger of the latest generation with one charging output and built-in Bluetooth! The Blue Smart IP22 24/16(1) charger can be used with equipment in your workshop or with vehicles such as (classic) cars, motorcycles, boats and motorhomes, and it charges both classic 24V lead-acid batteries and modern lithium batteries. It offers Highlights of the 24/16(1) Blue Smart IP22 Charger Intelligent charging, up to the perfect battery condition... The seven-stage charging algorithm gets the best out of your battery. The charger supplies the battery with the energy it needs, keeps it in a healthy condition, ensures better performance... and a longer life. Recovery of deeply discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart IP22 charger will try to recharge a deeply discharged battery by forcing a weak charging current into it. Normal charging then resumes as soon as sufficient voltage is present across the battery terminals. Check the battery status remotely with the VictronConnect app The Blue Smart IP22 24/16(1) charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured with the VictronConnect app. The most important technical features of the 24/16(1) Blue Smart IP22 Charger Victron part number: BPC241647002 charges 24V lead-acid, gel, AGM and lithium batteries 16A maximum charging current 1 battery charging output very compact dimensions: 235 x 108 x 65mm state-of-the-art, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app Other performance features of the 24/16(1) Blue Smart IP22 Battery Charger Pioneering efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat than the industry standard. In addition, once the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 7-stage charging algorithm The 24/16(1) Blue Smart charger features microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adjusted to the way the battery is used. Storage mode: less maintenance and ageing while the battery is at rest Storage mode is activated whenever no discharge has taken place within 24 hours. The float voltage is then reduced to 2.2V/cell (26.4V for a 24V battery) to minimise gassing and thereby prevent corrosion of the positive plates. Once a week, the voltage is raised to the gassing voltage level. This achieves a kind of equalisation charge that prevents electrolyte stratification and sulphation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC241647002 24/16(1) IP22 Blue Smart Charger 1x Operating manual
202,00 €
The Multiplus-II 48/5000/70-50 GX is a high-end device combination from Victron Energy (MPN PMP482506000) that combines classic Multiplus components with an external current sensor and an integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 100 A and widens the potential range of use to ESS applications. The inverter module delivers a full 5000 W with non-linear loads, or 4000 W with continuous linear loads. The 48 V battery charger is also very well proportioned at 70 A charging power and is complemented by a 50 A transfer switch that can switch back and forth between the AC connections in a flash. Compared with the other devices in the series, the GX variants have an integrated GX display with numerous additional connection options. Key features of the Multiplus-II 48/5000/70-50 GX integrated GX control device with various communication ports PowerControl and PowerAssist – boosting of grid or generator power built-in anti-islanding function and connection option for an external current sensor (optional) can be used as a backup device in grid-connected systems to supply power during grid failures usable in various ESS (Energy Storage System) applications ideally suited to professional shipping, yachts, vehicles and land-based off-grid applications VE.Bus interface for parallel and three-phase operation, remote monitoring and system integration virtually unlimited power through parallel and three-phase operation can be configured on site or remotely using VEConfigure software* Technical features 5000W output with non-linear loads, 4000 W continuous load and 9000 W peak power for 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz maximum efficiency is 95%, protection class IP22 Always enough power thanks to PowerControl and PowerAssist A maximum grid or generator current can be set on the Multiplus-II 48/5000/70-50 GX. The MultiPlus-II then takes other connected AC loads into account and uses only the current that is still “left over” to charge the battery. This prevents the generator or grid connection from being overloaded (PowerControl function). With the PowerAssist function, the PowerControl principle takes on a new dimension. Load peaks often occur only for a limited period. In such a case, the MultiPlus-II immediately compensates for insufficient generator, shore power or grid power with energy from the battery. When the load is reduced, i.e. when loads are switched off, the energy that is then available again can be used to charge the batteries. Solar power: AC power even during a grid failure The device can be used in off-grid as well as grid-connected PV systems and in other alternative energy systems. It can be used with solar charge controllers as well as with grid-tied inverters. Maximum flexibility thanks to two AC outputs The main output ensures uninterrupted operation. In the event of a grid failure or an interruption of the shore/generator power, the MultiPlus-II takes over the supply of the connected loads. Switching takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when AC power is available at the input of the MultiPlus-II. Loads that must not discharge the battery, such as a water heater, can be connected to this output. Scope of the integrated GX device One VE.Can interface. This can be used to connect Victron VE.Can devices (e.g. VE.Can MPPT). The connection can also be reconfigured via the remote console for use with a compatible CAN-bus Li-ion battery. 1x USB port 1x Ethernet port 1x VE.Direct port Many options for system expansion The settings can be changed within a few minutes using the VEConfigure software (a computer or laptop and an MK3-USB interface are required). Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, Digital Multi Control panel. Remote configuration and monitoring Install a Color Control GX or other GX products to connect to the internet. The operating data can be stored and viewed free of charge on the VRM (Victron Remote Management) website. If systems are connected to the internet, they can be accessed remotely and settings can be changed. Scope of delivery: 1x Victron PMP482506000 Multiplus-II 48/5000/70-50 GX 230V1x user manual
980,00 €
The Orion-Tr 24/24-17 from Victron Energy (MPN ORI242441110) is a galvanically isolated DC-DC voltage converter and provides a regulated DC voltage and thus trouble-free operation of your DC loads. The compact Orion-TR DC-DC voltage converter converts the DC input voltage (16-35V) into an adjustable 24V output voltage (18-30V) and delivers a constant continuous current of 17A, which corresponds to a power of 400W. Thanks to the Orion-Tr 24/24-17, you can supply every 24V load with exactly the right voltage. The correct voltage is also ensured over longer cables, because the Orion can adjust the voltage to compensate for cable losses. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. The Orion-Tr 24/24-17 also supports parallel connection with identical units and has a remotely controllable on/off switch. Key features of the Orion-Tr 24/24-17 400W (with galvanic isolation) Victron Energy part number: ORI242441110 for 24V battery voltage, adjustable output voltage 18-30V max. 400W output power at a maximum current of 17A wide input voltage range: 16-35V Protection rating IP43, galvanic isolation 200V DC between input, output and housing can be connected in parallel with similar units to increase power remotely controllable on/off switch high efficiency of 89% Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge batteries. Remotely controllable on/off switch Thanks to the remote on/off connection, a high-current switch in the input wiring is no longer necessary. The remote on/off connection can be controlled with a power-saving switch or by the engine's run/stop switch (see manual). Scope of delivery: 1x Victron Energy ORI242441110 Orion-Tr 24/24-17 17A 400W DC-DC voltage converter
182,00 €
The Smartsolar MPPT 150/100-tr from Victron Energy (MPN SCC010100210) belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection under partial shading are just 2 of the many highlights of this new class of device. The devices in the 150/45tr to 150/100-tr classes are also available as a version with MC4 connectors on the solar side of the charge controller instead of screw terminals. In addition, this model supports parallel operation with other controllers of the same type. Compared with the BlueSolar series, the Bluetooth module of the Smartsolar family is already permanently integrated in the controller, which makes the Smart dongle unnecessary for this device. Also new is the optional LCD display, which can simply be plugged onto the SmartSolar 150/85-tr when needed. The display then provides all important information about the controller. If required, the MPPT WireBox-XL Tr from Victron Energy is the ideal addition to your SmartSolar charge controller. It safely covers the cable entries and connection terminals of the controller and protects them from external influences and accidental contact. Key product features of the SmartSolar 150/100-Tr 100A 12V 24V 36V 48V MPPT ultra-fast latest-generation MPP tracker ensures the best possible yield even under overcast skies automatic detection of the MPP voltage under partial shading provides a further yield improvement compared with "simple" MPPT charge controllers with optional LCD display permanently integrated Bluetooth module for app-based analysis and configuration of the controller (via the free Victron app on compatible devices) optional LCD display available integrated VE.Direct data communication port for connecting accessories such as the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% parallel operation with other 150/100 controllers possible Adjustable absorption charge voltage Adjustable float charge voltage Suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing max. rated charging current 100A, 150V maximum PV open-circuit voltage maximum PV power: 12V 1450W / 24V 2900W / 48V 5800W integrated reverse battery polarity protection multi-stage and adaptive charging algorithm remote on/off switching possible via 2-pin connector protection rating IP 43 for the electronic components and IP 22 for the connection area of the controller integrated temperature sensor adjusts float and absorption charge voltage according to temperature day/night timer control and light dimming option Smart configuration and analysis via the Victron Connect app Modern Apple and Android smartphones, tablets, MacBooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Smart data communication via VE.Direct and lightning-fast Bluetooth module In the case of partial shading, two or more points of maximum power (MPP) can be present on the current-voltage curve. Conventional MPPTs tend to settle on a local MPP, which may not be the optimal MPP. The innovative algorithm of the SmartSolar controller always maximises the energy yield by locking onto the optimal MPP. High-speed latest-generation MPP tracker Especially under overcast skies, when the light intensity changes constantly, an extremely fast MPPT controller increases the energy yield by up to 30 % compared with PWM charge controllers and by up to 10 % compared with slower MPPT controllers. Optional LCD display available for retrofitting If you prefer to operate and configure the Smartsolar MPPT 150/100-Tr directly, you can retrofit the Smartsolar Control SCC900600010 display. The display allows simple configuration of the controller via keypad and also shows all important performance data at a glance. Comprehensive electronic protection protection against reverse battery polarity PV reverse current protection protection against overheating of the device protection against short circuits protection against reverse PV polarity The VE.Direct data communication port In text mode, VE.Direct transmits all important parameters every second to other devices coupled to the charge controller, making communication with accessories such as the GX Color Control system panel possible. The VE.Direct port is intended for products where full CAN bus integration (VE.Direct) would cause excessive costs. You can find more information about VE.Direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC010100210 SmartSolar MPPT 150/100-Tr 12V 24V 36V 48V 100A Charge controllerUser manual
469,00 €
The intelligent SmartShunt 500A from Victron Energy is a multifunction battery monitor that lets you view all information on your mobile phone or in the VictronConnect app. This gives you effortless access to all monitored battery parameters, including the state of charge, the remaining run time, history data and much more. You can alternatively connect the SmartShunt to a GX device, such as a Cerbo GX or the Color Control GX, and read out information from there. The connection is then made via a VE.Direct cable. The waterproof battery monitor is also an excellent option for BMV battery monitoring, especially in systems where battery monitoring is required but less wiring and clutter are desired. About the SmartShunt Multifunction battery monitor Connection via Bluetooth with the VictronConnect app Connection to a GX device Battery monitoring Waterproof to IP65 Studs for shunt connections: M10 The following variants are also available: 1000 A 2000 A Why battery monitoring? Batteries are used in a wide range of applications, usually to store energy for later use. However, the amount of energy actually stored cannot be read directly from the battery. Factors such as undercharging or overcharging, deep discharge, excessive charging or discharging currents and high ambient temperatures can shorten the battery's service life. An advanced battery monitor makes it possible to track these factors and gives you, the user, important feedback. This allows suitable measures to be taken when needed to extend the service life profitably. The investment in the battery monitor therefore pays for itself quickly. The VictronConnect app The app is essential for setup and monitoring! The following connection options are available: Bluetooth USB, via the optional interface Remotely via a GX device and the VRM portal The app is available for the following platforms: Android Apple iOS (USB is not supported, only a Bluetooth connection is possible) macOS Windows (Bluetooth is not supported, only a USB connection is possible) You can download the app from the respective app stores or from the Victron product page. Alternatively, a QR code is available. You will also find instructions for VictronConnect in the appendix. Technical specifications Supply voltage range: 6.5-70V DC Current draw: <1 mA Input voltage range, auxiliary battery: 6.5-70V DC Battery capacity: 1-9999 Ah Operating temperature range: -40°C - +50°C Temperature measuring range: -20°C - +50°C Dimensions: 46 x 120 x 54 mm Protection class IP65 Scope of delivery: 1x Victron SmartShunt 500A/50mV battery monitor IP65
101,00 €
The Victron MPPT 100/30 (MPN SCC020030200) belongs to the large family of BlueSolar MPPT charge controllers and, like its larger siblings, already offers ultra-fast power tracking and can thereby increase the yield of your solar system. Besides the higher charging and PV power, this Blue differs even more from the lower models: the 100/30 controller is able to fully program and store different charging algorithms. The self-created algorithms can then be selected directly via a small switch dial on the housing. From this model onwards, there is no longer a load output directly on the controller. More protection compared with the smaller models of the BlueSolar MPPT series Compared with the 75/10, 75/15 and 100/15 models, the BlueSolar 100/30 MPPT has overheating protection with a shut-down function and automatic restart once a normal operating temperature has been reached. Latest-generation high-speed MPP trackerEspecially under overcast skies, when the light intensity changes constantly, an extremely fast MPPT controller improves the energy yield by up to 30% compared with PWM charge controllers and by up to 10% compared with slower MPPT controllers. In addition, the 100/30 offers several other innovative technologies such as the VE.Direct communication port.Options for programming, real-time data and display of the historyModern Apple and Android smartphones, tablets, MacBooks and other devices can, for example, be connected via VE.Direct with the Bluetooth Smart dongle and the MPPT app or the GX Color Control. Please note that the Bluetooth Smart dongle and the GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as options.Key product features of the BlueSolar 100/30 30A 12V 24V MPPT ultra-fast latest-generation MPP tracker ensures the best possible yield even under overcast skies integrated VE.Direct data communication port for connecting to auxiliary devices such as the Bluetooth Smart dongle or the GX Color Control panel high maximum efficiency of 98% fully programmable charging algorithms that can later be activated and used manually via a switch on the housing Rated charging current 30A, 100V maximum PV open-circuit voltage 440W maximum PV power at 12V, 880W in 24V systems integrated protection against reverse battery polarity multi-stage and adaptive charging algorithm day/night timer and light dimming option VE.Direct data communication portVE.Direct in text mode transmits all important parameters every second to other devices coupled to the charge controller and thus allows communication with auxiliary devices such as the Bluetooth Smart dongle or the Victron GX Color Control panel. The VE.Direct port is intended for products for which a full CAN bus integration (VE.Direct) would cause excessive costs. You will find more information about VE.Direct in our Victron brand world.Scope of delivery1x Victron SCC020030200 BlueSolar MPPT 100/30 12V 24V 30A charge controllerOperating manual
101,00 €
The LiFePO4 25.6V 200Ah Smart battery (MPN BAT524120610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, the LiFePO4 25.6/200 Smart stores a full 5120Wh of electricity, with very low self-discharge and outstanding service life. The Victron LiFePO4 battery family already features integrated cell balancing and a BMS (battery management system) interface. The integrated Bluetooth for connecting to the Li-Ion app rounds off the overall package. Victron LiFePO4 25.6V 200AH Smart Battery Nominal voltage: 25.6V integrated Bluetooth for connecting to the Victron Li-Ion app Victron part number: BAT524120610 Nominal energy at 25°C*: 5120Wh Nominal capacity at 25°C/0°C/-25°C: 200Ah / 160Ah / 100Ah Number of cycles at depth of discharge 80%/70%/50%: 2500 / 3000 / 5000 cycles recommended continuous discharge current: <200A maximum continuous discharge current: 400A Dimensions: 237 x 650 x 163 mm Weight: 39kg Connection terminal: M8 You will find further technical data in the official data sheet and further below in the "Technical specifications" section. Efficient, economical LiFePO4 25.6V 200Ah Smart Battery LiFePO4 batteries are expensive compared with AGM or gel batteries, but in most cases the higher purchase cost more than pays off. With a service life of up to 5000 cycles, you exceed the maximum service life even of the best lead-acid batteries many times over. In addition, the LFP 25.6/200 scores with space savings and weight savings of 70% each. The energy efficiency of 92% is also well above the 80% of lead-acid batteries, which can be of essential importance especially in off-grid systems, in particular in off-grid solar and/or wind power systems. All-rounder: infinitely flexible with lithium technology from Victron Energy Victron LiFePO4 Smart batteries can be implemented in almost all common applications. In the mobile sector, this technology has played an important role for some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and irregular charging does them no harm, they are also making their way into stationary applications and can now be found in almost all system classes. Parallel and series connection (max. 20 batteries per BMS) Thanks to the integrated cell balancing and cell monitoring function, you can conveniently connect up to 20 batteries of this type per BMS in parallel and in series – this corresponds to a maximum nominal energy of 102 kWh (24/48 V). Integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful for detecting a (possible) problem such as a cell imbalance in good time. IMPORTANT NOTE: The use of an additional BMS is mandatory in order to interrupt or switch off the load if the voltage of a battery cell falls below 2.5V, or to stop charging if the voltage of a battery cell rises above 4.2V, and to switch off the system if the cell temperature exceeds 50°C. The VE.Bus BMS is suitable for this purpose – please refer to the respective product descriptions of the devices for further details. Due to its classification as dangerous goods, this product is shipped by freight forwarder! Scope of delivery: 1x Victron Energy BAT524120610 LiFePO4 25.6V 200AH Smart Battery1x Operating manual
1.923,00 €
The Victron Phoenix Inverter 12/500 VE.Direct converts 12 V DC voltage into 230 V AC voltage (sine wave). With 500 VA continuous power, it supplies smaller loads in vehicles, boats and garden houses. Highlights Proven topology: Full bridge with toroidal transformer, short-circuit proof and protected against overheating. High starting power: Peak power of 900 W for loads such as LED converters, halogen lamps or power tools. ECO mode: Reduces consumption at low load; minimum load 15 W. VE.Direct: Configuration via PC (interface cable) or smartphone (Bluetooth dongle), each available separately. Remote switching: On/off switch can be connected via a two-pole connector. Technical specifications Designation Value Continuous power at 25 °C 500 VA / 400 W Continuous power at 40 °C 350 W Peak power 900 W Input voltage (12-V model) 9.2–17 V Output voltage 230 VAC ±3 %, 50 Hz Max. efficiency 90 % No-load power consumption 6 W Operating temperature -40 to +65 °C Protection rating IP21 Dimensions (H x W x D) 86 x 172 x 275 mm Weight 3.9 kg Scope of delivery 1× Victron Phoenix Inverter 12/500 VE.Direct 12 V to 230 V Who is it for? For campers, sailors and hobby users who want to run a laptop, chargers or small devices from a 12-V battery. Good to know The socket variant (Schuko, IEC-320 or others) is listed in the data sheet as the standard AC output; please check the version you want before ordering. We would be happy to give you personal advice on selection and use: by phone at +49 931 760 260 40 or by e-mail at kontakt@energie24.shop.
141,00 €
The Victron SmartSolar MPPT 150/35 is an MPPT solar charge controller with a rated charging current of 35 A for 12-, 24- and 48-V batteries. Bluetooth is built in, and via VE.Direct the controller can be connected to GX devices or a PC. Highlights Ultra-fast MPPT: Improves the yield under changing cloud cover by up to 30 % compared with PWM controllers. Partial shading: The algorithm finds the optimal Maximum Power Point. Efficiency: Peak over 98 %, fanless; full charging current up to 40 °C. Bluetooth Smart: Set up, monitor and update via the VictronConnect app. Protective functions: PV reverse polarity, short circuit, overtemperature and PV reverse current. Technical specifications Designation Value Rated charging current 35 A Battery voltage 12/24/48 V (automatic, 36 V via software) Rated PV power 500 W (12 V), 1000 W (24 V), 1500 W (36 V), 2000 W (48 V) Max. PV short-circuit current 40 A Max. PV open-circuit voltage 150 V absolute, 145 V start-up and operation Max. efficiency 98 % Self-consumption 12 V: 20 mA, 24 V: 15 mA, 48 V: 10 mA Operating temperature -30 to +60 °C Protection rating IP43 (electronics), IP22 (connection area) Dimensions (H x W x D) 130 x 186 x 70 mm Weight 1.25 kg Scope of delivery 1× Victron SmartSolar MPPT 150/35 1× user manual Who is it for? For motorhomes, boats, garden houses and small off-grid systems with solar panels up to about 2000 W at 48 V. Good to know The PV string must exceed the battery voltage by 5 V for the controller to start. The maximum PV open-circuit voltage of 150 V applies at the coldest temperature; please plan the strings accordingly. We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by email at kontakt@energie24.shop.
167,00 €
The Victron SmartSolar MPPT 250/100-Tr is an MPPT charge controller with a VE.Can interface for 12-, 24- and 48-V battery systems with a rated charging current of 100 A. The maximum PV open-circuit voltage of 250 V allows longer panel strings; Bluetooth is built in. Highlights Efficiency: Peak over 99 %, fanless. Ultra-fast MPPT: More yield under changing cloud cover: up to 30 % compared with PWM controllers. Parallel operation: Up to 25 controllers synchronised via VE.Can or up to 10 via Bluetooth. Communication: VE.Can, VE.Direct and Bluetooth Smart; optional plug-in display. Programmable relay: Switches on alarms or other events; remote on/off via 2-pin connector. Technical specifications Designation Value Rated charging current 100 A Battery voltage 12/24/48 V (automatic, 36 V manual) Rated PV power 12 / 24 V 1450 W / 2900 W Rated PV power 36 / 48 V 4350 W / 5800 W Max. PV short-circuit current 70 A (max. 30 A per MC4 connector) Max. PV open-circuit voltage 250 V absolute, 245 V start-up and operation Max. efficiency 99 % PV connection Screw terminals 35 mm² Operating temperature -30 to +60 °C Protection rating IP43 (electronics), IP22 (connection area) Dimensions (H x W x D) 216 x 295 x 103 mm Weight 4.5 kg Scope of delivery 1× Victron SmartSolar MPPT 250/100-Tr (100 A) charge controller 1× user manual Who is it for? For larger off-grid systems, hybrid storage and motorhomes with longer panel strings that want central monitoring via GX devices and VE.Can. Good to know The panel layout should be chosen so that the short-circuit current of 70 A is not exceeded. The controller is intended for indoor use without air conditioning. Installation and system design should be checked by a qualified electrician. We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by email at kontakt@energie24.shop.
556,00 €
The MPPT RS SmartSolar from Victron Energy (MPN: SCC145120410) is a 48V solar charge controller with a PV input voltage of up to 450 VDC and an output current of 200A. It is used in grid-connected and off-grid solar applications where maximum battery charging power is required. Features With ultra-fast Maximum Power Point Tracking (MPPT) Several independent MPPT tracking inputs Isolated PV connections for additional safety Wide MPPT voltage range Light, efficient and quiet Integrated display and Bluetooth communication PV insulation resistance monitoring for safety at higher voltages VE.Can and VE.Direct connection I/O connections Configure and monitor with the VictronConnect app or in the VRM portal The integrated BluetoothSmart connection enables quick monitoring or configuration of settings via app. The integrated 30-day history shows the individual performance of each MPPT tracker. The app allows you to display, for example, battery voltage and current, PV voltage and current, historical data and trends. The VictronConnect app is available for Android, iOS, Windows and macOS X.When the solar controller is connected to a GX device and the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers. Additional units connected in series The SmartSolar RS charge controller is equipped with VE.Can bus connections. This enables communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply "daisy-chained" together with an RJ45 cable. When they are connected to one another, all individual charge controllers synchronise their charging stages. You can also send your data over the same cable to a GX device (such as the CerboGX) for monitoring. Technical specifications Battery voltage: 48V Rated charge current: 200A Max. charging power: 11.5 kW at 57.6V Charging algorithm: multi-stage adaptive (customisable) Max. DC PV voltage: 450V MPPT operating voltage range: 65-450V (start-up voltage 120 V) Number of trackers: 4 Max. PV operating input current: 16A per tracker Protection rating: IP21 Dimensions: 487 x 434 x 146 mm Weight: 13.7 kg Scope of delivery: 1x Victron SmartSolar MPPT RS 450/200-RT 48V Charge Controller
1.583,00 €
The Victron MPPT 75/10 (MPN SCC010010050R) belongs to the large family of BlueSolar MPPT charge controllers and, like its larger siblings, already offers ultra-fast power tracking and can thereby increase the yield of your solar system. Latest-generation MPP trackerEspecially under overcast skies, when the light intensity changes constantly, an extremely fast MPPT controller improves the energy yield by up to 30% compared with PWM charge controllers and by up to 10% compared with slower MPPT controllers. In addition, the 75/10 offers several other innovative technologies.Options for programming, real-time data and display of the history Modern Apple and Android smartphones, tablets, MacBooks and other devices can, for example, be connected via VE.Direct with the Bluetooth Smart dongle and the MPPT app or the GX Color Control. Please note that the Bluetooth Smart dongle and the GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as options.Key product features of the BlueSolar 75/10 10A 12V 24V MPPT ultra-fast latest-generation MPP tracker ensures the best possible yield even under overcast skies integrated VE.Direct data communication port for connecting to auxiliary devices such as the Bluetooth Smart dongle or the GX Color Control panel 12V 24V systems possible Rated charging current 10A 145W maximum PV power at 12V, 290W in 24V systems Load output rated at 10A with automatic load disconnect when battery undervoltage is imminent (deep-discharge protection) integrated protection against reverse battery polarity multi-stage and adaptive charging algorithm programmable battery charging algorithm integrated Battery Life algorithm extends the life of your batteries when it is active and all loads run via the load output on the controller day/night timer and light dimming option Integrated VE.Direct data communication portVE.Direct in text mode transmits all important parameters every second to other devices coupled to the charge controller and thus allows communication with auxiliary devices such as the Bluetooth Smart dongle or the Victron GX Color Control panel. The VE.Direct port is intended for products for which a full CAN bus integration (VE.Direct) would cause excessive costs. You will find more information about VE.Direct in our Victron brand world, in the information section.Battery Life algorithm helps to increase battery lifeIf the solar charge controller is unable to charge the battery to its full capacity within a day, the battery status constantly alternates between "partially charged" and "end of discharge". This operating mode (no regular full charging) is optimal for small lead batteries, but with lead-acid batteries in particular, such irregular charging and discharging leads to damage to the battery after only a few months, and its service life is in some cases shortened considerably.The Battery Life algorithm monitors the state of charge of the battery and, if necessary, raises the load disconnect threshold day by day (i.e. the load is disconnected earlier) until the energy gained is sufficient to charge the battery to almost 100%. From that point on, the load disconnect threshold is modulated so that charging to almost 100% is achieved about once a week.Scope of delivery1x Victron SCC010010050R BlueSolar MPPT 75/10 12V 24V 10A charge controller
37,00 €
The GX Touch 70 display from Victron Energy (MPN BPP900455070) is the display accessory for the Cerbo GX communication centre. The 7-inch touchscreen display gives you an instant overview of your system and lets you change settings in no time. The display is easily connected to the Cerbo GX via a cable. Its super-slim, waterproof design and easy installation offer a lot of flexibility. Features of the GX Touch 70 7-inch touchscreen display Instant system overview Easy mounting from the top Connection via a single cable The complement to the Cerbo GX The GX Touch 70 display is the ideal complement for getting the most out of your Cerbo GX communication centre. Using the Bluetooth capability, access it directly via the GX Touch 70, optimise your system and make changes easily and quickly. Scope of delivery: 1x GX Touch 70 display1x HDMI-USB connection cable1x Mounting material
294,00 €
The Victron MultiPlus-II 48/3000/35-32 combines an inverter, battery charger and transfer switch in one unit for 48-V battery systems. It is suitable for off-grid systems, boats and vehicles as well as for ESS (Energy Storage System) applications with a built-in anti-islanding function. Highlights PowerControl and PowerAssist: The unit takes other AC loads into account and supports weak grid or generator sources from the battery. ESS-capable: Built-in anti-islanding function and optional external current sensor (100 A) for self-consumption optimisation and zero feed-in. Two AC outputs: The main output switches over in less than 20 milliseconds in the event of a grid outage; the second output only supplies power when AC input is present. Parallel and three-phase operation: Up to 6 units in parallel, three identical units as a three-phase system. Monitoring: Cerbo GX or Ekrano GX, VRM portal and VictronConnect; configuration with VEConfigure. Technical specifications Designation Value Battery voltage 48 V (input range 38–66 V) Continuous power at 25 °C 3000 VA / 2400 W Continuous power at 40 °C 2200 W Continuous power at 65 °C 1700 W Peak power 5500 W Max. charge current 35 A Transfer switch 32 A Max. efficiency 95 % No-load power consumption 11 W Output 230 VAC, 50 Hz Dimensions (H x W x D) 499 x 268 x 141 mm Weight / protection rating 19 kg / IP22 Scope of delivery 1× Victron MultiPlus-II 48/3000/35-32 230 V 1× User manual Who is it for? For operators of 48-V battery systems who need backup power, self-consumption optimisation or UPS-like protection, for example in motorhomes, boats, off-grid systems and home storage systems. Good to know The external current sensor and the battery temperature sensor accessory (not included with 48-V models) are ordered separately. Configuration and commissioning should be carried out by a qualified electrician. We would be happy to give you personal advice on selection and use: by phone at +49 931 760 260 40 or by e-mail at kontakt@energie24.shop.
624,00 €
The Energy Meter EM24 from Victron Energy (MPN REL200200100) is a three-phase energy meter with a maximum of 65A per phase. It is installed in the house connection box/meter cabinet to measure the power on all three phases. The energy meter can be used as: grid meter and as a control input for an ESS system measuring device for the output of a PV inverter measuring device for the output of an AC generator set For all of the above uses, the meter should be connected to the local network in such a way that the GX device can reach it. Note on GX firmware versions To support the Ethernet EM24 meters, Venus 2.60 is the minimum firmware required on the GX device. Scope of delivery: 1x Victron Energy Meter EM24 REL200200100
138,00 €
The Orion Tr-Smart DC-DC from Victron Energy (MPN ORI242440140) is a professional, DC-to-DC adaptive 3-stage charger with integrated Bluetooth, known on the market as a battery-to-battery (B2B) charger. The charge booster is suitable for use in dual-battery systems in vehicles or on boats, where the alternator and the starter battery are used to charge the service battery. The charger can be used in 12V or 24V systems and is suitable for both lead-acid and lithium batteries. Models of up to 400W are available, and an unlimited number of units can be connected in parallel to increase the output power. Key features Bluetooth Smart enabled Fully programmable Adaptive 3-stage charging algorithm Remote on/off Short-circuit proof Parallel connection possible to increase output current Overtemperature protection Protection class IP43 Bluetooth Smart enabled Monitoring, changing settings and updating the charger when new software features become available can be done with any Bluetooth-enabled smartphone, tablet or other device. Adaptive 3-stage charging algorithm: constant current – constant voltage - float With lead-acid batteries, it is important to keep the absorption time short after shallow discharges to avoid overcharging the battery. After a deep discharge, the constant-voltage period is automatically extended to ensure that the battery is fully charged. For lithium batteries, the absorption time is fixed, by default 2 hours. Alternatively, a fixed output voltage can be selected. Remote on/off A remote on/off switch or a relay contact can be connected to the two-pole connector. Alternatively, terminal H (right) of the two-pole connector can be switched to a battery positive terminal, or terminal L (left) of the two-pole connector to the battery negative terminal (or, for example, to the chassis of a vehicle). Technical specifications Input voltage range: 16-35 V Nominal output voltage: 24.2 V Output voltage adjustment range: 18-30 V Output voltage tolerance: ±0.2 V Cont. output current at nominal output voltage and 40°: 17 A Cont. output power at 40°C: 400 W Operating temperature range: -20°C - +55°C Weight: 1.6 kg Dimensions: 130 x 186 x 70 mm Scope of delivery: 1x Victron Energy Orion-Tr Smart DC/DC charge booster 24/24-17A (400W) ORI242440140
232,00 €
The GX Touch 50 display from Victron Energy (MPN BPP900455050) is the display accessory for the Cerbo GX communication centre. The 5-inch touchscreen display gives you an instant overview of your system and lets you change settings in no time. The display is easily connected to the Cerbo GX via a cable. Its super-slim, waterproof design and easy installation offer a lot of flexibility. Features of the GX Touch 50 5-inch touchscreen display Instant system overview Easy mounting from the top Connection via a single cable The complement to the Cerbo GX The GX Touch 50 display is the ideal complement for getting the most out of your Cerbo GX communication centre. Using the Bluetooth capability, access it directly via the GX Touch 50, optimise your system and make changes easily and quickly. Scope of delivery: 1x GX Touch 50 display1x HDMI-USB connection cable1x Mounting material
179,00 €
The Victron EM540 electricity meter (MPN REL200100100) is designed to monitor three-phase operating modes, for example PV inverters, AC generator sets or inverters. This allows you to measure the power and energy of the entire system as a direct measurement in the distribution box. Compared with the EM24, the Victron EM540 uses a higher sampling rate. It is suitable as a complement to a Victron inverter/charger. The device offers two options for connecting to a GX device: Wired connection via RS485-to-USB interface with a cable length of 1.8m or 5m wireless connection via ZigBee-to-USB and ZigBee-to-RS485 converters The product at a glance can be used as a grid meter and as a control input for an ESS system Can be used to measure the output of a PV inverter or an AC generator set Support for different types of energy meters Can be used to display the data on a GX device Technical specifications: Manufacturer part number: REL200100100 Display: LCD Phases: suitable for 3 phases Max. rated current: 65A per phase Measurement type: direct/shunt Communication: RS485 Scope of delivery: 1x Victron Energy EM540 Energy Meter 3-phase (REL200100100)
133,00 €
The Blue Smart IP22 12/30(1) charger from Victron Energy (MPN BPC123047002) is a professional, compact 12V 30A battery charger of the latest generation with one charging output and built-in Bluetooth! The Blue Smart IP22 12/30(1) charger can be used with equipment in your workshop or with vehicles such as (classic) cars, motorcycles, boats and motorhomes, and it charges both classic 12V lead-acid batteries and modern lithium batteries. It offers Highlights of the 12/30(1) Blue Smart IP22 Charger Intelligent charging, up to the perfect battery condition... The seven-stage charging algorithm gets the best out of your battery. The charger supplies the battery with the energy it needs, keeps it in a healthy condition, ensures better performance... and a longer life. Recovery of deeply discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart IP22 charger will try to recharge a deeply discharged battery by forcing a weak charging current into it. Normal charging then resumes as soon as sufficient voltage is present across the battery terminals. Check the battery status remotely with the VictronConnect app The Blue Smart IP22 12/30(1) charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured with the VictronConnect app. The most important technical features of the 12/30(1) Blue Smart IP22 Charger Victron part number: BPC123042002 charges 12V lead-acid, gel, AGM and lithium batteries 30A maximum charging current 1 battery charging output very compact dimensions: 235 x 108 x 65mm state-of-the-art, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app Other performance features of the 12/30(1) Blue Smart IP22 Battery Charger Pioneering efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat than the industry standard. In addition, once the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 7-stage charging algorithm The 12/30(1) Blue Smart charger features microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adjusted to the way the battery is used. Storage mode: less maintenance and ageing while the battery is at rest Storage mode is activated whenever no discharge has taken place within 24 hours. The float voltage is then reduced to 2.2V/cell (13.2V for a 12V battery) to minimise gassing and thereby prevent corrosion of the positive plates. Once a week, the voltage is raised to the gassing voltage level. This achieves a kind of equalisation charge that prevents electrolyte stratification and sulphation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC123047002 12/30(1) IP22 Blue Smart Charger1x Operating manual
169,00 €
The Victron VM-3P75CT is a three-phase energy meter with Ethernet and VE.Can for measuring power and energy, for example at the house connection or at the output of a PV inverter. It works with integrated split-core current transformers, so the existing wiring does not have to be disconnected. Highlights Plug and play: Usable as a grid meter in most systems without configuration. Fast measurement: Update rate of 100 ms for accurate grid consumption and feed-in values, for example in ESS systems. Integrated current transformers: Split-core current transformers (aperture 10 ±0.5 mm) for 75 A per phase included in the scope of delivery. Flexible roles: Use as a grid meter, PV inverter meter, generator meter or AC load meter. Monitoring: Display in the VictronConnect app, on GX devices such as Cerbo GX or Ekrano GX and in the VRM portal. Technical specifications Designation Value Rated current per phase 75 A Voltage input L-N 85–265 VAC Voltage input L-L 150–460 VAC Frequency 50/60 Hz Update rate 100 ms Communication 2× RJ45 VE.Can, 1× RJ45 Ethernet, Modbus UDP Self-consumption 1.45 W / 3.1 VA Protection rating IP20 Operating temperature -10 to +55 °C Dimensions (H x W x D) 90 x 71 x 59 mm Weight 370 g (incl. packaging) Scope of delivery 1× Victron VM-3P75CT Energy Meter Split-core current transformers (cable length 640 mm) Pluggable screw terminals for the current transformers VE.Can RJ45 terminators Who is it for? For operators of Victron systems with a GX device who want to record grid consumption, feed-in or generation in three phases, for example for zero feed-in and self-consumption optimisation. Good to know The meter is intended for indoor use only and is self-powered via L1 and N. Connection to a GX device is via VE.Can or Ethernet; it is better to avoid Wi-Fi links in between. The datasheet does not state the exact number of current transformers supplied. We are happy to give you personal advice on selection and use: by phone on +49 931 760 260 40 or by email at kontakt@energie24.shop.
222,00 €
The Multiplus-II 48/5000/70-50 is a high-end combination unit from Victron Energy (MPN: PMP482505010) that combines classic Multiplus components with an external current sensor and an integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 100 A and widens the potential range of use to ESS applications. The inverter module delivers a full 5000 W under non-linear load, or 4000 W under continuous linear load. The 48 V battery charger is also very well proportioned with a charging power of 70 A and is complemented by a 50 A transfer switch that allows lightning-fast switching between the AC connections. Key features of the Multiplus-II 48/5000/70-50 PowerControl and PowerAssist – boosting grid or generator power Built-in anti-islanding function and connection option for an external current sensor (optional) Can be used as a backup device in grid-connected systems to supply power during grid outages Usable in various ESS (Energy Storage System) applications Ideally suited for professional marine use, yachts, vehicles and land-based off-grid applications VE.Bus interface for parallel and three-phase operation, remote monitoring and system integration Virtually unlimited power through parallel and three-phase operation Can be configured on site or remotely using VEConfigure software* Technical features 5000 W power under non-linear load, 4000 W continuous load and 9000 W peak power for 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz max. efficiency is 95%, protection class IP22 Always enough power thanks to PowerControl and PowerAssist A maximum grid or generator current can be set on the Multiplus-II 48/5000/70-50. The MultiPlus-II then takes other connected AC loads into account and uses only the power that is still “left over” to charge the battery. This prevents the generator or the grid connection from being overloaded (PowerControl function). With the PowerAssist function, the PowerControl principle gains a new dimension. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus-II immediately compensates for weak generator, shore or grid power with energy from the battery. When the load is reduced, i.e. when loads are switched off, the energy that is then available again can be used to charge the batteries. Solar power: AC power even during a grid outage The unit can be used in both off-grid and grid-connected PV systems as well as in other alternative energy systems. It can be used with solar charge controllers as well as with grid-tied inverters. Maximum flexibility thanks to two AC outputs The main output ensures uninterrupted operation. In the event of a grid outage or an interruption of shore or generator power, the MultiPlus-II takes over the supply of the connected loads. The switchover occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is ensured. The second output only supplies power when AC power is available at the input of the MultiPlus-II. Loads that must not discharge the battery, such as a water heater, can be connected to this output. Many options for system expansion The settings can be changed within a few minutes using the VEConfigure software (a computer or laptop and an MK3-USB interface are required for this).Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, Digital Multi Control panel. Remote configuration and monitoring Install a Color Control GX or other GX products to connect to the internet. The operating data can be stored and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the internet, they can be accessed remotely and settings can be changed. Scope of delivery: 1x Victron PMP482505010 Multiplus-II 48/5000/70-50A1x User manual
933,00 €
The Victron Lynx Power In module (MPN LYN020102000) is used to connect batteries via an external fuse. This can be useful if you have several parallel strings. Because most battery banks have an extremely high short-circuit current potential, it is recommended to use an external fuse system with a suitable fault current interrupting rating (e.g. an NH HRC). Features of the Victron Lynx Power In 1000A Negative and positive DC busbar easy installation part of the modular Lynx distribution system Design The Power In module contains a negative and a positive DC busbar with M8 screws for connecting the battery cables. Cables with a diameter of up to 22mm can be routed through the lower entries and via the two side connections. Scope of delivery: 1x Victron Lynx Power In
127,00 €
You have seen 72 out of 72 products
