2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
Der HUAWEI SUN2000-8K-MAP0 ist ein dreiphasiger Hybridwechselrichter aus der MAP0-Serie, der PV-Energie, Batteriespeicher und Netzbetrieb intelligent kombiniert. Er unterstützt asymmetrische Phasenausgabe, sodass jede Phase bedarfsgerecht versorgt werden kann. Der Wechselrichter verfügt über zwei MPPT-Eingänge und bietet aktive Schutzfunktionen wie AFCI (Lichtbogenunterbrechung), Überspannungs- und Polungsschutz sowie Temperaturüberwachung an den Steckverbindern. Er ist kompatibel mit den Huawei LUNA2000-S0/S1 Speichersystemen und kann mit SmartGuard für Notstrombetrieb ergänzt werden. Die Schutzart IP66 erlaubt den Einsatz im Außenbereich unter gehäuften Witterungsbedingungen. Die Überwachung und Steuerung erfolgen über integriertes WLAN, RS485 und optional über 4G-Dongle mit Anbindung zur FusionSolar Plattform.
Dreiphasiger Hybridwechselrichter mit asymmetrischer Phasenausgabe
Umfassender Schutz durch AFCI, Überspannungs- und Polungsschutz
Kompatibel mit Huawei LUNA2000 Speichern & SmartGuard
Der HUAWEI SUN2000-8K-MAP0 ist ein leistungsfähiger 8 kW Hybridwechselrichter mit intelligenter Phasenverteilung und integrierten Schutzmechanismen. Er lässt sich nahtlos in PV-Speichersysteme integrieren und unterstützt moderne Energiemanagementfunktionen.
Lieferumfang: 1x Huawei SUN2000-8K-MAP0 Wechselrichter
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The DTSU666-H Smart Power Sensor power meter from Huawei is a high-precision device that was specially developed for monitoring and measuring electrical parameters in a 3-phase power supply system. It is known for its simple handling, intuitive operation and precise measurements. Here are the most important technical parameters and features of the device:
The device has an LCD display that enables the measured values clear and easy to read. The total power consumption of the measuring device is very low with ≤ 1 w, which makes it an energy -efficient choice for monitoring and measuring electrical parameters.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
Jolywood JW-HD108N-R2/500WP-high-performance module with N-Type Topcon Technology
The Jolywood JW-HD108N-R2/500WP is a premium solar module of the latest generation with the latest N-Type TopCon technology. With a maximum output power of 500 WP, an efficiency of up to 23.2 % and bifacial design, this fullblack module not only provides a strong look, but also maximum energy yield-even with diffuse light.
Powerful and efficient - even under difficult conditions
Compared to conventional modules, this bifacial module not only uses direct sunlight on the front, but also the reflected light over the back. This enables up to 30 % more electricity yield - ideal for flat roofs, light surfaces or snow regions.
The integrated zero lid technology prevents lighting degradation (lid), which means: the module reliably delivers high performance even after many years. This is supplemented by an excellent weak light performance, so that even in diffuse weather or in the morning and evening hours, energy is generated reliably.
Robust and weatherproof for every area of application
With a Print load capacity of up to 5400 PA on the front as well as 2400 pa on the back the module is particularly resistant to wind, snow and mechanical stress. Certified according to the most important international standards (TÜV Süd / TÜV Nord) as well as ISO 9001, ISO 14001, ISO 45001 and IEC 62941, it is a reliable choice for long-term PV projects.
Future security with a strong guarantee
The module is with a 25-year product guarantee and one 30-year service guarantee delivered. In the first year, an output of 99 % is guaranteed, after which the degradation is only 0.4 % pro Year - that ensures one Long-term performance of 87.4 % after 30 years.
Technical highlights
Max. Performance: 500 WP
Module efficiency: 23,2 %
technology: N-Type Topcon, Bifacial, Monocrystalline
Cells: 108 cells, half -cell technology
Performance tolerance: 0–3 % (positive)
Plug -in system: Mc4-Evo2
Cable length: 1300 mm (+/-)
Dimensions: 1960 × 1134 × 30 mm
Weight: 27.3 kg
Frame: Black, 30 mm
Protection & resilience: Front 5400 Pa, back 2400 Pa
Certificate: TÜV Süd / TÜV Nord / Munich Re reinsurance
Type of protection: IEC-compliant against salt, ammonia, fire, hail and mechanical stress
The Jolywood JW-HD108N-R2/500WP is a highly efficient, durable and weatherproof solar module that is ideal for demanding PV projects in private and commercial sector. Due to its modern cell technology, strong guarantees and the possibility of using additional income via bifacial back reflection, it offers an excellent investment in a sustainable and independent energy future.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
Increase the efficiency and aesthetics of your installations with our high -quality roof implementation - Made in Germany!
Whether for Cars, motorhomes, home & garden or solar applications, This roof implementation offers a secure and stylish solution for cable laying.
With its aerodynamic shape and the color options in classic black and elegant white, it fits seamlessly into every design.
Made made of robust acrylic styrene-acrylnitrile (ASA), it is resistant to UV rays, weather influences and temperature fluctuations.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The activation code for the Kostal Smart Energy meter is used to activate the battery function in conjunction with the PIKO MP Plus. After you have received the activation code, please set up the inverter and battery as described in the instructions of the Kostal Smart Energy meter.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
In the design, the Wallbox Enector follows its function simply and elegantly. The compact design enables space -saving installation. The robust housing allows safe use indoors and outdoors. An LED display on the housing front provides information quickly and clearly about all important status messages and shows the charging operation. The equipment of the Kostal Wallbox is also impressive: the 7.5 meter long charging cable included in the scope of delivery leaves enough scope to refuel the electric vehicle within a convenient range. The type 2 charging plug for the vehicle connection is tailored to the charging point in common fashion 3. The enector does 3.7 kW or 11 kW one to three-phase, with a current of up to 16 amps pro Phase. Whether with or without a solar system: The Kostal Wallbox is refueling your electric car from all available energy sources. Battery and fast charging, it depends on it and that is exactly one of the great strengths of the Kostal Wallbox. In conjunction with the Kostal Smart Energy meter, optional comfort functions are also available. In power mode, ENECTOR focuses on fast charging with the maximum available performance. Lock mode blocks the charging function from unwanted use. The two solar LADENODI "Solar Pure Mode" and "Solar Plus Mode" are particularly efficient in their effect. In the solar pure mode, the solar power produced is loaded exclusively. Only as much can be loaded here as is currently available. The charging capacity is adjusted for solar plus fashion to minimize the network performance cover. It can be taken into account whether the energy is used from a connected battery memory or not.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The three-phase 100 kW inverter from Kostal has 16 DC inputs and 8 mpp trackers and an input current of 20 a pro Mppt. The DC installation is easy, inexpensive and possible without strand collection boxes.
The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strands and is reliably used by its integrated and certified network service functions.
We expect the required certificates for connecting to the medium -voltage network for April 2024.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The three -phase 30 - 60kW commercial inverter from KostalThe integrated Kostal Smart AC Switch replaces the external dome switch. The DC installation is simple, inexpensive and possible without strand collection boxes.The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strands and is reliably used by its integrated and certified network service functions.There is a free choice of monitoring through compatibility with many parking regulators and data loggers.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The three -phase 30 - 60kW commercial inverter from KostalThe integrated Kostal Smart AC Switch replaces the external dome switch. The DC installation is simple, inexpensive and possible without strand collection boxes.The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strands and is reliably used by its integrated and certified network service functions.There is a free choice of monitoring through compatibility with many parking regulators and data loggers.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The three -phase 30 - 60kW commercial inverter from KostalThe integrated Kostal Smart AC Switch replaces the external dome switch. The DC installation is simple, inexpensive and possible without strand collection boxes.The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strands and is reliably used by its integrated and certified network service functions.There is a free choice of monitoring through compatibility with many parking regulators and data loggers.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The QR code on the Plenticoin card is used to access activation codes to expand the Kostal inverter and wall boxes and can be used in the Kostal Solar Webshop. This is one Aweck voucher.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The QR code on the Plenticoin card is used to access activation codes to expand the Kostal inverter and wall boxes and can be used in the Kostal Solar Webshop. This is oneAweck voucher.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The Kostal Plenticore G3 is a transformerless inverter with 3 mpp trackers. Universal as a solar, hybrid or battery inverter can be used with basic services AC 4.0 (s) / 8.5 (m) / 15.0 kW (L).
The services can optionally be expanded with 1 - 2x plasticoin.The battery input can be implemented with 3x plasticoin via the 3rd MPP tracker and thus enables the connection of a compatible HV memory.
Prepared for additional battery charge via AC energy sources (e.g. for Kostal Doppower).
Replacement electricity operation with manual switch Kostal Backup Switch G3 (08-000747) or via Enwitec Netz derivatslaltBox Kostal 3P 35KW (08-000772/773).
4 Digital outputs for load control or event report, SG-Ready.-Compatible Free monitoring via Kostal Solar Portal and Solar appWith the Kostal DC overvoltage protection module G3 (08-000746), direct integration of a ÜS possible.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The Kostal Plenticore G3 is a transformerless inverter with 3 mpp trackers. Universal as a solar, hybrid or battery inverter can be used with basic services AC 4.0 (s) / 8.5 (m) / 15.0 kW (L).
The services can optionally be expanded with 1 - 2x plasticoin.The battery input can be implemented with 3x plasticoin via the 3rd MPP tracker and thus enables the connection of a compatible HV memory.
Prepared for additional battery charge via AC energy sources (e.g. for Kostal Doppower).
Replacement electricity operation with manual switch Kostal Backup Switch G3 (08-000747) or via Enwitec Netz derivatslaltBox Kostal 3P 35KW (08-000772/773).
4 Digital outputs for load control or event report, SG-Ready.-Compatible Free monitoring via Kostal Solar Portal and Solar appWith the Kostal DC overvoltage protection module G3 (08-000746), direct integration of a ÜS possible.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The Kostal Plenticore G3 is a transformerless inverter with 3 mpp trackers. Universal as a solar, hybrid or battery inverter can be used with basic services AC 4.0 (s) / 8.5 (m) / 15.0 kW (L).
The services can optionally be expanded with 1 - 2x plasticoin.The battery input can be implemented with 3x plasticoin via the 3rd MPP tracker and thus enables the connection of a compatible HV memory.
Prepared for additional battery charge via AC energy sources (e.g. for Kostal Doppower).
Replacement electricity operation with manual switch Kostal Backup Switch G3 (08-000747) or via Enwitec Netz derivatslaltBox Kostal 3P 35KW (08-000772/773).
4 Digital outputs for load control or event report, SG-Ready.-Compatible Free monitoring via Kostal Solar Portal and Solar appWith the Kostal DC overvoltage protection module G3 (08-000746), direct integration of a ÜS possible.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The Kostal Smart Energy Meter (KSEM) is an energy meter with a wide range of functions. Thanks to additional computing power in the device, it is technically prepared for future functions and tasks and offers the optimal solution for all Kostal inverters.
A great advantage of the KSEM is the standard preliminary configuration for the Plenticore Plus, Piko IQ and Piko MP Plus. This means that direct installation is possible without adapting the parameters and other settings.
Kostal Smart Energy Meter Optimal energy use
The Kostal Smart Energy meter enables optimal use of energy in the household. With the energy meter there is a 3-phase energy measurement in real time. The measurement data is transmitted via standard interfaces to the inverters.
The KSEM thus supports the energy management of Kostal inverter Plenticore Plus, Plenticore BI, Piko IQ and Piko MP Plus. In conjunction with a PIKO 4.2 - 20 or Piko 36 EPC, the Kostal Smart Energy Meter is a replacement for the Piko BA Sensor.
The inverters can be set up in the Kostal Smart Energy meter with the aim of solar self-maximization and the display of the own/house consumption in the solar portal. To do this, the Kostal Smart Energy meter must be integrated into the Kostal solar portal.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
Air/water heat pump Therma V Hydrosplit R32, HU163MRB, 3-phase, power range 16 kW + indoor unit HN1616Y.NB1
The LG Therma V Hydrosplit heat pump series separates indoor and outdoor units with a connection with water pipes. The heat exchanger is in the outdoor unit, which reduces the risk of refrigerant deck in the room. Therma V R32 Hydrosplit IWT (with integrated hot water tank) is a device for hot water supply, room heating and cooling. With this solution, the internal hot water reservoir is conveniently connected to a separate outdoor unit.
On the other hand, Hydosplit in the Hydrobox version is a solution for the heating and cooling of rooms with high flexibility when installing thanks to the possibility of assembly on the wall.
Technical properties
The Series Therma V HydroSplit (Hydrobox & IWT) is a generation of LG heat pumps for heating, cooling and heating domestic water (DHW). The pumps of this type are characterized by a high heating output even at low temperatures, a large operating area and a reduced noise level.
Features of the devices
High energy efficiency (SCOP 4.60 / A +++)
Wide operating area (ambient temperature: -25 ~ 35 ° C / water side: 15 ~ 65 ° C)
Built -in hydraulic components in the interior unit: water pump, expansion vessel, ventilation, etc.)
Hot water memory (200 l) - IWT
Buffer storage (40 l) and expansion vessel for hot water (8 l) available as an option.
Built-in water flow and pressure sensors for real-time monitoring of the water height and water level
Extended water pump control (optimal flow, constant flow, constant flow, constant t)
Improved tax logic for the second cycle
High -performance refrigerant R32
R1 Scroll-compressor
Anti-corrosion coating Black Fin
LG Thinqtm
Keymark / MCS / Eurovent certification
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
Air -water heat pump Therma V Monoblock S R32 HM123MR.U34 - 3 phases - 12.0 kW
The Series Therma V Monoblock S is the second generation of the LG mono blocks for R32. The symbol S ("Silence / Supreme") means that the monoblock of this series is characterized by a low noise level and the best performance of the Therma V series.
LG mono block devices do not require refrigerant lines. These devices are set up outdoors and connected to the building installation via water pipes.
The plate heat exchanger, the water pump and the expansion vessel are housed in the housing of the monoblock heat pump. This means a simple and quick installation of the device, also in systems that have already been operated.
Technical properties
The Series Therma V Monobloc S R32 is a generation of low -noise heat pumps from LG, which is for For heating, cooling and heat heating (DHW). The concept of "all-in-one" was used in the pumps of this type, i.e. no work in connection with the installation of the refrigerant. The simple installation goes hand in hand with the universal character of the device and the high seasonal energy efficiency, which leads to numerous applications of the heat pump offered in residential buildings and in selected supply facilities.
Properties of the device
High energy efficiency (SCOP 4.67 / A +++)
Excellent performance at low ambient temperatures (100%; -15 ° C)
Wide operating area (ambient temperature: -25 ~ 35 ° C / water side: 15 ~ 65 ° C)
Noise, 32 to 35 dB (A) (sound pressure, quiet operation)
R32 high -performance refrigerant
R1 Scroll-compressor
Anti-corrosion coating Black Fin
LG Thinqtm
Keymark / MCS / Eurovent certification
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
🌡️🌿 Make your home smarter with the Tuya Smart Zigbee temperature and moisture sensor- your key to an intelligent and comfortable home! 🌿🌡️
1. Smart house control made easy! Requires the Tuya Zigbee Wireless Gateway Hub to seamlessly insert yourself into your smart home system.
2. Always in the picture above your indoor climate! With real-time monitoring of temperature and humidity, controlled via the Smart Life / Tuya app.
3. Top technology for your home! Thanks to the advanced Zigbee technology, you benefit from a power-saving microprocessor for a long service life.
4. Intelligent scenes for maximum comfort! The sensor can be connected to your air conditioning and your humidifier in order to automatically create the ideal room temperature and moisture.
5. Versatile and user -friendly! Ideal for different rooms and thanks to the supplied sticker to simply install the wall.
6. Seamless integration into your smart home! Completely compatible with Alexa and Google Home for a comfortable voice control.
Extended functions and compatibility:
The Tuya Smart Zigbee temperature and moisture sensor can interact with a variety of smart home devices to create automated scenarios. Imagine your heating system automatically switches on when the temperature falls below a certain value or your humidifier starts if the humidity is too low.
Compatible with the Smart Life app, the sensor enables easy integration into your existing smart home ecosystem. Control all your smart life-compatible devices from a central place.
Use the advantages of ZigBee technology, which is known for your reliability and low latency to ensure quick and efficient communication between your smart devices.
Optional: Of course we offer the right smart gateway for the connection of the thermostats (interfaces: Zigbee, WiFi, Alexa, Google Home, ...)
Technical details:
Battery type: 2*aaa (not included)
Product parameter: DC3V LR03
Purchase current: ≤10ua
Alarm power: ≤15mA
Low voltage and undervoltage: ≤2.6V
Wireless technology: Zigbee
Recording temperature: -10 ℃ to +60 ℃
Covering moisture: 0-100%RH
Operating temperature: -10 ℃ to +50 ℃
Operating moisture: a maximum of 95%RH
🏠 Secure this advanced sensor now and experience how your home becomes more intelligent and comfortable! 🏠
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
Our AC ELWA 2 is a 0 - 3.5 kW continuously regulated hot water preparation device for mesh -coupled photovoltaic systems. The AC ELWA 2 uses excess photovoltaic energy for its hot water preparation and thus optimizes the self-consumption of the existing PV system. At the same time, self -sufficiency is increased - this protects against incalculable or increasing operating costs. Due to the stepless regulation, the PV feed-on power is exhausted to zero.The AC ELWA 2 has our proven optional hot water safety: Even if the sun does not seem sufficient, the hot water can be brought to the desired temperature from the public power grid. The device can be installed in hot water and buffer stores.Advantages of AC ELWA 2:
More power: 3.5 kW instead of 3.0 kW
The simplest assembly: The heating element and the control unit can be attached one after the other.
Easy operation thanks to the display as with AC • Thor
Multiple communication options: In addition to Ethernet RJ45, WLAN, RS485, PWM-in, potential switching output also
External temperature sensor included
An external 3 kW heating element can be connected
Even more compact design than in the predecessor
Fixed wiring no cable with a Schukostecker
Simple conversion of the AC ELWA-E on AC Elwa 2
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
Hot water preparation and building heating with solar power
AC • Thor 9S is a 0 - 9 kW continuously regulated photovoltaic power manager for hot water, electrical heat sources and optional heating.
Simple & efficient: The AC • Thor 9S controls up to 3 electrical heat sources depending on the availability of PV energy and heat requirements. And that for both hot water and room heating. It ensures your personal living comfort fully automatically. In a residential building that is built or renovated according to the current standard, the AC • Thor 9S replaces the conventional, water -based building technology. Missing residual energy can be obtained from the public power grid.
Of course, the AC • Thor 9S can also be integrated into conventional, water -guided systems such as buffer storage. His flexibility leaves nothing to be desired. Thanks to the built-in touch display, it is operated at any time without additional devices.
The AC • Thor 9S is particularly suitable for:
Single and multi-family houses
Agricultural businesses
Commercial and industrial applications
Hotels and tourism companies
Near and district heating networks
Advantages
Stepless up to 9 kW possible
3 controllable outputs
For 3 phases of heating rods with a common zero-conductor
The simplest loading of three zones 3 x 3 kW
Also combinable with heat pump
Two-zone room heating possible
Disruption of the building services room
System open for various inverter, battery systems and smart home
Up to 85 % PV self -consumption/self -use even without battery storage
Plug & Play - All connections plug -in!
No time -consuming wiring
No clamping points, no PG screw connections
No cumbersome opening of a housing
Technical data
Network voltage: 3 x 230 V, 50 Hz
Outputs: 0-3000 W continuously regulated, three outputs, max. 9000W
Network connection: 3-phase with zeros
Consumer connections: plug -in contacts
Display: Color Grafik, Touch Screen 2.83 "
Dimensions (W x H x D): 135 x 195 x 65 mm
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
Hot water preparation and building heating with solar power
AC • Thor is a 0 - 3 kW continuously regulated photovoltaic power manager for hot water, electrical heat sources and optional heating.
Simple & efficient: the AC • Thor controls electrical heat source depending on the availability of PV energy and heat requirements. And that for both hot water and room heating. It ensures your personal living comfort fully automatically. In a residential building that is built or renovated according to the current standard, the AC • Thor replaces conventional, water -guided building technology. Missing residual energy can be obtained from the public power grid.
Of course, the AC • Thor can also be integrated into conventional, water -guided systems such as buffer storage. His flexibility leaves nothing to be desired. Thanks to the built-in touch display, it can be operated at any time without additional devices. And easy to install.
Advantages
30% cost savings compared to conventional systems through self -generated energy
Without maintenance through cables instead of pipes
Disruption of the building services room
System open for various inverter, battery systems and smart home
Enables affordable living also in housing construction
Up to 85 % PV self -consumption/self -use even without battery storage
Technical data
Network voltage: 230 V, 50 Hz
Outputs: 0-3000 W continuously regulated + switching output 16 a
Network connection: single-phase, protective contact connector
Consumer connection: protection contact socket for ohmic loads
Display: Color Grafik, Touch Screen 2.83 "
Connection cable: 2.8 m
Dimensions (W x H x D): 135 x 210 x 65 mm
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The P1 digital meter interface is only planned to connect the PV performance managers AC • Thor and AC • Thor 9S via the Modbus RTU gateway to the P1 digital counter and thus be able to evaluate information about excess performance of the photovoltaic system without additional points. Any other use can damage the P1 digital meter interface. Before commissioning, read the assembly instructions of the AC • Thor and the operating manual available online carefully.
Connect the RJ12 connector of the interface on the right socket of the electric meter P1. Connect the Modbus RTU gateway of the AC • Thor via a shielded three-wire cable (length: max. 1000 m) to the clamp block of the interface. Connect points A and B on the AC • Thor side of the cable to the supplied 120 ω resistance.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
The simplest way to more self -consumption/self -use.
The screw radiator 3 KW was developed in particular for the application with the photovoltaic power manager AC • Thor and the screw radiator 9 kW for use with the photovoltaic power manager AC • Thor 9S. The screw radiators can be installed in fresh water and buffer stores. Due to their special execution, there are only very low thermal surface loads on the heating elements, which contributes directly to the increase in the product life.
Steplessly controllable by photovoltaic power manager AC • Thor or AC • Thor 9SThe desired hot water temperature can be set with a rotary button. The AC • Thor or AC • Thor 9S recognizes the shutdown and automatically goes into standby mode for minimal self-consumption.
A non -regulations are of course integrated.
In some projects, however, higher temperatures are desired, for example if a buffer tank is to be loaded to over 90 ° C. The screw -up radiators are also available without a thermostat, only with a safety temperature limiter. To end the heating process, the temperature sensor must then be used, which is included in the AC • Thor and the AC • Thor 9S.
Advantages
With manually adjustable target temperature (bimetal thermostat)
1.5 inch standard thread
Single -phase or three -phase
Optionally also without a thermostat, only with safety temperature limiter
Technical data 3KW
Heating power: 0 - 3,000 W
Network connection: single-phase, protective contact connector, 230 V, 50 Hz
Protection class: IP45
Connection cable: 2.8 m
Dimensions (W x H x D): 88 x 88 x 518 mm
2-4 Werktage
Lieferzeit je nach Produkt. Speditionsware nach Terminabsprache länger. Bestellware wird erst beim Hersteller geordert und kann daher verzögert sein.
