-
Victron Victron Energy Meter EM24 - 3 phase - max 65A/phase Ethernet
The Energy Meter EM24 from Victron Energy (MPN REL200200100) is a three-phase energy meter with a maximum of 65A pro phase. It is used in the house connection/meter box to measure the performance on all three phases. The energy meter can be used as: Network meter and is used as a control input for an ESS system Measuring device for the power of a PV inverter Measuring device for the power of an alternating current generator For all of the above uses, the meter should be connected to the local network in a way that the GX device can reach it. Note on GX firmware versions To support the Ethernet EM24 meters, Venus 2.60 is the minimum firmware required on the GX device. Scope of delivery: 1x Victron Energy Meter EM24 REL200200100
€138,00
-
Victron Victron Orion-Tr Smart non-isolated DC-DC converter charger 24/24-17A (400W)
The Orion Tr-Smart DC-DC from Victron Energy (MPN ORI242440140) is a professional, DC to DC adaptive 3-stage charger with integrated Bluetooth, known in the market as a battery-to-battery (B2B) charger. The charging booster is suitable for use in dual battery systems in vehicles or boats where the alternator and starting battery are used to charge the service battery. The charger can be used in 12V or 24V systems and is suitable for both lead and lithium batteries. Models up to 400W are available and an unlimited number of devices can be connected in parallel to increase output power. Essential properties Suitable for Bluetooth Smart Fully programmable Adaptive 3-stage charging algorithm Remote on/off switch Short circuit proof Parallel connection possible to increase the output current Over-temperature protection Protection class IP43 Suitable for Bluetooth Smart Monitoring, changing the settings and updating the charger with new software functions available can be done with any Bluetooth-enabled smartphone, tablet or other device. Adaptive 3-stage charging algorithm: constant current - constant voltage - conservation With lead batteries, it is important that the recording time is kept short during shallow discharges to avoid overcharging the battery. After a deep discharge, the constant voltage duration is automatically extended to ensure that the battery is fully charged. For lithium batteries, the recording time is fixed, the default setting is 2 hours. Alternatively, a fixed output voltage can be selected. Remote on/off switch A remote-controlled on/off switch or a relay contact can be connected to the two-pin plug. Alternatively, the H (right) connection of the two-pin plug can be connected to a battery positive terminal or the L (left) connection of the two-pin plug can be connected to the battery negative terminal (or, for example, to the body of a vehicle). Technical data Input voltage range: 20-35V Rated output voltage: 24.2V Output voltage adjustment range: 20-30 V Tolerance output voltage: ±0.2 V Continuous output current at nominal output voltage and 40°: 17 A Continuous output power at 40°C: 400 W Operating temperature range: -20°C - +55°C Weight: 1.6kg Dimensions: 130 x 186 x 70mm Scope of delivery: 1x Victron Energy Orion-Tr Smart DC/DC charging booster 24/24-17A (400W) ORI242440140
€232,00
-
Victron Victron GX Touch 50 display panel for Cerbo GX
The GX Touch 50 display from Victron Energy (MPN BPP900455050) is the display accessory for the Cerbo GX communication center. The 5-inch touchscreen display provides an instant overview of your system and allows you to make settings in a snap. The display is easily connected to Cerbo GX via a cable. Its super slim, waterproof design and easy installation offer plenty of flexibility. Features of the GX Touch 50 5 inch touchscreen display Immediate system overview Easy to attach from above Connection via a cable The addition to the Cerbo GX The GX Touch 50 display is the ideal addition to your Cerbo GX Make optimal use of the communication center. Access it directly from GX Touch 50 using Bluetooth capability and optimize your system and make changes easily and quickly. Scope of delivery: 1x GX Touch 50 display1x HDMI-USB connection cable1x mounting material
€179,00
-
Victron Victron Energy Meter EM540 3 phase energy meter - max 65A/phase
The Victron EM540 electricity meter (MPN REL200100100) is designed to monitor three-phase operating modes, for example PV inverters, AC generators or inverters. This allows you to measure the performance and energy of the entire system as a direct measurement in the distribution box. The Victron EM540 has a higher scanning speed compared to the EM24. It is suitable as a complement to a Victron inverter/charger. The device offers two options for connecting to a GX device: Cable connection via RS485 to USB interface with a cable length of 1.8m or 5m wireless connection via ZigBee to USB and ZigBee to RS485 converters The article at a glance Can be used as a network meter and as a control input for an ESS system Can be used to measure the performance of a PV inverter or an alternator Support different types of energy meters Used to display data on a GX device Technical data: Manufacturer Part Number: REL200100100 Display: LCD Phases: suitable for 3 phases Max. Nennstrom: 65A pro Phase Messart: Direct/Shunt Kommunikation: RS485 Scope of delivery: 1x Victron Energy EM540 Energy Meter 3-phase (REL200100100)
€133,00
-
Victron Victron Blue Smart IP22 12/30(1) Charger 12V 30A 1 battery
The Blue Smart IP22 12/30(1) charger from Victron Energy (MPN BPC123047002), is a professional, compact 12V 30A battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart IP22 12/30(1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and charges both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/30(1) Blue Smart IP22 Charger intelligent charging, until the perfect battery condition... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeping it in a healthy condition, ensuring better performance... and a longer life. Restoration of deeply discharged "dead" batteries Unlike most other brands and product ranges, the Blue Smart IP22 charger will attempt to recharge a deeply discharged battery by imposing a weak charging current on it. Normal charging operation will then resume as soon as there is sufficient voltage between the battery connections. View battery status remotely with the VictronConnect app The Blue Smart IP22 12/30(1) charger has built-in Bluetooth. This allows you to check the status of the charger and battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app. the most important technical features of the 12/30(1) Blue Smart IP22 Charger Victron part number: BPC123042002 Charges 12V lead-acid, gel, AGM and lithium batteries 30A maximum charging current 1 battery charging output very compact dimensions: 235 x 108 x 65mm highly modern, seven-stage charging algorithm with integrated Bluetooth for use with the free VictronConnect app other performance features of the 12/30(1) Blue Smart IP22 battery charger Groundbreaking efficiency With up to 94% efficiency, these chargers produce up to four times less heat compared to the industry standard. Additionally, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 7-stage charging algorithm The 12/30(1) Blue Smart charger is characterized by its microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adapted to the type of battery use. Storage mode: Less maintenance and aging when the battery is idle The storage mode is always activated if there has been no discharge within 24 hours. The trickle charge voltage is then reduced to 2.2V/cell (13.2V for a 12V battery) to minimize gas development and thus prevent corrosion on the positive plates. Once pro week the voltage is increased to the level of the gassing voltage. This creates a type of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC123047002 12/30(1) IP22 Blue Smart Charger1x user manual
€169,00
-
Victron Victron VM-3P75CT Energy Meter 3-phase electricity meter 75A/phase
The Multiplus-II 48/5000/70-50 is a high-end device combination Victron Energy (MPN: PMP482505010) which combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 100 A and extends the potential area of application to ESS applications. The inverter module delivers a whopping 5000 W under non-linear loads, or 4000 W under continuous linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is complemented by a 50 A transfer switch, which allows you to switch back and forth between the AC connections at lightning speed. Important performance features of the Multiplus-II 48/5000/70-50 PowerControl and PowerAssist – increasing network or generator performance Built-in anti-islanding function and connection option for external current sensor (optional) Can be used as a backup device in grid-connected systems to provide power in the event of grid failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land-based, off-grid applications VE.Bus interface for parallel and three-phase operation, remote monitoring and system integration Virtually unlimited performance through parallel and three-phase operation Can be configured on site or remotely using VEConfigure software* Technical features 5000W power at non-linear load, 4000W continuous load and 9000W peak power for 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz max. efficiency is 95%, protection class IP22 Always enough power thanks to PowerControl and PowerAssist A maximum mains or generator current can be set on the Multiplus-II 48/5000/70-50. The MultiPlus-II then takes other connected AC consumers into account and only uses the electricity that is “left over” to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The PowerAssist function gives the PowerControl principle a new dimension. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus-II immediately compensates for weak generator, shore power or network performance with energy from the battery. If the load is reduced, i.e. h. If consumers are switched off, the sufficient energy available can then be used to charge the batteries. Solar power: alternating current even in the event of a power failure The device can be used in both off-grid and grid-connected PV systems as well as other alternative energy systems. It can be used with both solar charging controllers and grid-tied inverters. Maximum flexibility thanks to two AC outputs The main output ensures uninterrupted operation. In the event of a power failure or an interruption in the shore/generator power, the MultiPlus-II takes over the supply of the connected consumers. The switchover occurs so quickly (in less than 20 milliseconds) that computers and other electronic devices operate uninterrupted. The second output only supplies power when AC power is available at the input of the MultiPlus-II. Consumers who are not allowed to discharge the battery, such as: B. a water heater can be connected to this output. Many options for system expansion The settings can be changed within a few minutes using the VEConfigure software (a computer or laptop and an MK3 USB interface are required). Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, digital multi control panel. Remote configuration and monitoring Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. When systems are connected to the Internet, they can be accessed remotely and settings can be changed. Scope of delivery: 1x Victron PMP482505010 Multiplus-II 48/5000/70-50A1x user manual
€222,00
-
Victron Victron MultiPlus-II 48/5000/70-50 230V
The Multiplus-II 48/5000/70-50 is a high-end device combination Victron Energy (MPN: PMP482505010) which combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 100 A and extends the potential area of application to ESS applications. The inverter module delivers a whopping 5000 W under non-linear loads, or 4000 W under continuous linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is complemented by a 50 A transfer switch, which allows you to switch back and forth between the AC connections at lightning speed. Important performance features of the Multiplus-II 48/5000/70-50 PowerControl and PowerAssist – increasing network or generator performance Built-in anti-islanding function and connection option for external current sensor (optional) Can be used as a backup device in grid-connected systems to provide power in the event of grid failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land-based, off-grid applications VE.Bus interface for parallel and three-phase operation, remote monitoring and system integration Virtually unlimited performance through parallel and three-phase operation Can be configured on site or remotely using VEConfigure software* Technical features 5000W power at non-linear load, 4000W continuous load and 9000W peak power for 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz max. efficiency is 95%, protection class IP22 Always enough power thanks to PowerControl and PowerAssist A maximum mains or generator current can be set on the Multiplus-II 48/5000/70-50. The MultiPlus-II then takes other connected AC consumers into account and only uses the electricity that is “left over” to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The PowerAssist function gives the PowerControl principle a new dimension. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus-II immediately compensates for weak generator, shore power or network performance with energy from the battery. If the load is reduced, i.e. h. If consumers are switched off, the sufficient energy available can then be used to charge the batteries. Solar power: alternating current even in the event of a power failure The device can be used in both off-grid and grid-connected PV systems as well as other alternative energy systems. It can be used with both solar charging controllers and grid-tied inverters. Maximum flexibility thanks to two AC outputs The main output ensures uninterrupted operation. In the event of a power failure or an interruption in the shore/generator power, the MultiPlus-II takes over the supply of the connected consumers. The switchover occurs so quickly (in less than 20 milliseconds) that computers and other electronic devices operate uninterrupted. The second output only supplies power when AC power is available at the input of the MultiPlus-II. Consumers who are not allowed to discharge the battery, such as: B. a water heater can be connected to this output. Many options for system expansion The settings can be changed within a few minutes using the VEConfigure software (a computer or laptop and an MK3 USB interface are required). Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, digital multi control panel. Remote configuration and monitoring Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. When systems are connected to the Internet, they can be accessed remotely and settings can be changed. Scope of delivery: 1x Victron PMP482505010 Multiplus-II 48/5000/70-50A1x user manual
€933,00
-
Victron Victron Energy Lynx Power In (M8)
The Victron Lynx Power In Module (MPN LYN020102000) is used to connect batteries via an external fuse. This can be useful if you have multiple parallel strings. Due to the extremely high short circuit current potential of most battery banks, it is recommended that an external backup system with an appropriate residual current interruption rating (e.g. an NH HRC) be used. Features of the Victron Lynx Power In 1000A Negative and positive DC bus bar easy installation Part of the Lynx modular distribution system Construction The Power In module contains a negative and a positive DC bus bar with M8 screws for connecting the battery cables. Cables with a diameter of up to 22mm can be routed through the lower entries and via the two side connections. Scope of delivery: 1x Victron Lynx Power In
€127,00
-
Fronius Fronius SYMO GEN24 10.0 PLUS
The Fronius Symo GEN24 series impresses with a variety of integrated features that make the hearts of private system owners beat faster. Communication via WLAN and Ethernet as well as the simple and quick integration of third-party components offer a high level of flexibility with other software and hardware products. The PV Point basic emergency power supply integrated as standard guarantees security of supply and the greatest possible independence. Thanks to Multi Flow Technology, longer emergency power supply and higher self-consumption are possible. Easy integration of third-party components is possible via open interfaces. Fronius optionally offers a full backup emergency power function for operating heat pumps. Your advantages Various emergency power variants Multi-flow technology Energy management functions Standard WLAN connection Quick, easy installation and commissioning Product specification: DC switch-on voltage: 80V Maximum input current (MPPT1 / MPPT2): 25A/12.5A Maximum AC power: 10,000VA Tightness class: IP66 Standard manufacturer's warranty: 10 years Easy installation and operation Save installation time and costs with 180° quick-release screws, spring clips and easy wall mounting system. Commissioning: Fronius Solar.start Quick and easy setup from any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third-party components such as home automation systems. Intelligent monitoring with Solar.web Monitor, analyze and compare different PV systems quickly and conveniently on your smartphone, tablet or laptop. Solar.web helps you offer your customers the best service.
€2.519,00
-
Fronius Fronius SYMO GEN24 8.0 PLUS
Product specification: DC switch-on voltage: 80V Maximum input current (MPPT1 / MPPT2): 25A/12.5A Maximum AC power: 8000VA Tightness class: IP66 Standard Manufacturer Warranty: 2 years Easy installation and operation Save installation time and costs with 180o quick release screws, spring clips and easy wall mounting system. Commissioning: Fronius Solar.start Quick and easy setup from any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third-party components such as home automation systems. Intelligent monitoring with Solar.web Monitor, analyze and compare different PV systems quickly and conveniently on your smartphone, tablet or laptop. Solar.web helps you offer your customers the best service.
€2.219,00
-
Fronius Fronius SYMO GEN24 6.0 PLUS
Product specification: DC switch-on voltage: 80V Maximum input current (MPPT1 / MPPT2): 25A/12.5A Maximum AC power: 6000VA Tightness class: IP66 Standard manufacturer's warranty: 2 years Easy installation and operation Save installation time and costs with 180o quick release screws, spring clips and easy wall mounting system. Commissioning: Fronius Solar.start Quick and easy setup from any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third-party components such as home automation systems. Intelligent monitoring with Solar.web Monitor, analyze and compare different PV systems quickly and conveniently on your smartphone, tablet or laptop. Solar.web helps you offer your customers the best service.
€2.027,00
-
Fronius Fronius SYMO GEN24 4.0 PLUS
Product specification: DC switch-on voltage: 80V Maximum input current (MPPT1 / MPPT2): 12.5A / 12.5A Maximum AC power: 4000VA Tightness class: IP66 Standard manufacturer's warranty: 2 years Easy installation and operation Save installation time and costs with 180º quick-release screws, spring clips and easy wall mounting system. Commissioning: Fronius Solar.start Quick and easy setup from any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third-party components such as home automation systems. Intelligent monitoring with Solar.web Monitor, analyze and compare different PV systems quickly and conveniently on your smartphone, tablet or laptop. Solar.web helps you offer your customers the best service.
€1.695,00
-
Fronius Fronius Ohmpilot 9.0-3
Fronius Ohmpilot 9.0-3 The Fronius Ohmpilot is a consumer controller for using excess solar energy to heat water. Thanks to the continuously adjustable power from 0 to 9 kW, excess PV energy can be used for highly efficient use and supply to household consumers. Ohmpilot is primarily used for the intelligent control of heating elements for hot water preparation in boilers and buffer tanks, but can also be used for infrared heaters or bathroom radiators. A single-family home with average water consumption can therefore use solar energy to cover the majority of its hot water needs from April to October. The result is a maximum of self-sufficiency, reduced CO2 emissions in the household and the elimination of the building's main hot water supply in the summer months.
€739,00
-
Pylontech Pylontech Force-H2 FC0500M-40S-V2 control unit HV BMS
The Pylontech Force H2 BMS FC0500M-40S is the central control module for the Pylontech Force H2 modular high-voltage battery storage system. It monitors and protects the connected battery modules and ensures safe and efficient operation of the entire system. Technical data Model: FC0500M-40SDimensions (L × W × H): 450 × 296 × 190 mmWeight: 12kgCommunication: CAN, ModbusProtection class: IP55Warranty: 5 year manufacturer's warranty Scope of delivery 1 × Pylontech Force H2 BMS FC0500M-40S control module This Pylontech Force H2 BMS FC0500M-40S is the perfect solution for anyone looking for a reliable, scalable and long-lasting high-voltage battery system for private or commercial applications. The intelligent control and high compatibility ensure efficient and future-proof energy management.
€678,00
-
BYD BYD control unit set 12.8kWh, basic + 5x BYD HVS 2.56 kWh Battery
The kit consists of: 1 X BYD Battery-Box Premium HV BCU (control unit) + base 5XBYD 2.56 KWH HVS battery module
€4.777,00
-
BYD BYD control unit set 10.2kWh, basic + 4x BYD HVS 2.56 kWh Battery
The kit consists of: 1 X BYD Battery-Box Premium HV BCU (control unit) + base 4XBYD 2.56 KWH HVS battery module
€3.920,00
-
BYD BYD control unit set 7.7kWh, basic + 3x BYD HVS 2.56 kWh Battery
The kit consists of: 1 X BYD Battery-Box Premium HV BCU (control unit) + base 3XBYD 2.56 KWH HVS battery module
€3.195,00
-
BYD BYD control unit set 5.1kWh, basic + 2x BYD HVS 2.56 kWh Battery
BYD 2.56 kWh HVS battery module. Suitable for high-performance backup power and off-grid functions. Superior performance with true high voltage series connection. The kit consists of: 1 X BYD Battery-Box Premium HV BCU (control unit) + base 2X BYD 2.56 KWH HVS battery module
€2.207,00
-
Huawei HUAWEI meter DTSU 666-H 3-phase
Huawei's DTSU666-H Smart Power Sensor Power Meter is a high-precision device specifically designed for monitoring and measuring electrical parameters in a 3-phase power system. It is known for its ease of use, intuitive operation and accurate measurements. Here are the main technical parameters and features of the device: The device has an LCD display that enables clear and easy reading of the measured values. The total power consumption of the meter is very low at ≤ 1 W, making it an energy-efficient choice for monitoring and measuring electrical parameters.
€148,00
-
Huawei HUAWEI Smart Dongle 4G
Interface for remote configuration of Huawei inverters via WiFi. The Huawei Smart dongle 4G Dongle is the connection between the Huawei SUN2000 M0 Inverters and the Internet. The Huawei Fusion Solar Portal allows the user to monitor the operation of the system. Up to 10 HuaweiInverters can be connected via a WLAN dongle with an RS485 interface. In this case, the inverter with the WLAN dongle takes on the role of the RS485 master. Product features of the HUAWEI Smart Dongle 4G LTE USB dongle LED display 4G LTE cellular standard External LED display to show login status External design, easy to replace Protection class IP65, housing resistant to bad weather conditions, which increases stability Plag and Play version, no external power required, easy to install Maximum number of devices supported: 10
€128,00
-
Huawei HUAWEI Back Up Box B1 - for WR M1 series
Huawei Backup Box B1 Backup power module for Huawei M1 series three-phase inverters. Backup Box B1 is used in rooftop PV systems to control the grid and island operation status of Huawei M1 series three-phase inverters. In the event of a grid failure, the inverter switches to island operation and supplies consumers not connected to the grid with power in backup mode. When the grid failure is resolved, the inverter switches back to the grid-connected state. The Backup Box B1 supports the following network systems: TN-S / TN-C-S / TT. When installing the Backup Box B1 outdoors, avoid exposing it to direct sunlight. It is recommended to install it in a protected location or provide it with a cover. An SPD surge protection device must be installed on the power grid side of the Backup Box B1 circuit. Basic features: Emergency power module for Huawei M1 series three-phase inverters Separate single-phase circuit, maximum power 3.3kVA, IP 65, weight 11.00 kg. Compatible with Huawei inverters model M0 and M1 Reliable 1-phase emergency power supply Automatic detection of a power failure and switchover to LUNA2000 battery Maximum apparent power 3.3kVA
€853,00
-
SMA SMA Energy Meter energy meter 3-phase meter
SMA energy measuring device Specifications: quick and hassle-free installation universal reading of the measured values Graphical visualization of the current measured values in Sunny Portal Using standard Ethernet cables for Speedwire communication Universal application options independent of existing energy meters Easy connection to SMA Smart Home system components Three-phase reading of the measured values for efficient energy management This SMA Energy Meter is a powerful measuring device for intelligent energy management in the SMA Smart Home, which records phase-accurate and balanced measured values like a meter for the electricity drawn from the grid. It transmits these values via Speedwire. All data about the photovoltaic energy generated, the electricity purchased and the energy fed in can be transmitted via a standard Ethernet cable, for example to the Sunny Home Manager or, in the future, to the Sunny Boy Smart Energy. This enables optimal energy monitoring, efficient load and battery management as well as reliable active power reduction at the grid connection point, taking self-consumption into account.
€337,00
-
SMA SMA STP Core1 50-41
The Sunny Tripower CORE1 is the world's first free-standing string inverter for decentralized rooftop and ground-mounted systems as well as covered parking spaces. The CORE1 is the 3rd generation of the successful Sunny Tripower product line and is revolutionizing the world of commercial inverters with its innovative concept. The SMA engineers' requirement was to combine a unique design and an innovative installation method in order to significantly increase the installation speed and achieve an optimal return on investment for all target groups. From delivery to installation to operation, the Sunny Tripower CORE1 enables comprehensive cost savings in logistics, labor, materials and service. Commercial PV installations are now faster, safer and easier to implement than ever before. Cost-effective Free-standing device with minimal assembly effort No DC fuses required Integrated DC circuit breaker Consistently integrated Integrated WiFi access with any mobile device 12 direct string inputs reduce labor and material costs AC/DC surge protection (optional) • Arc protection function (AFCI) Shortest installation time Fast grid connection through simple inverter configuration and commissioning Optimally accessible connection areas Maximum returns • Up to 150% oversizing of the PV generator Increased yield without installation effort thanks to integrated shading management SMA ShadeFix Technical features MPP voltage range 500 - 800V Open circuit voltage 1,000 B Max. input current pro MPP tracker 120A number d. MPP tracker 6 AC power rating 50,000W number d. Feed-in phases 3 Dimension 569x733x621mm Guarantee / Warranty Guarantee 5 year manufacturer's warranty - Note: The maximum warranty period is 15
€4.725,00
-
SMA SMA STP 10.0-3SE hybrid inverter 10kW Smart Energy
SMA Sunny Tripower 10.0 Smart Energy STP10.0-3SE Product specification: Storage system: Hybrid WR Rated power: 10,000 VA MPPT number: 2 MPP minimum voltage: 280V Maximum MPP voltage: 800V DC connector: SunClix Dimensions: 173mm x 500mm x 598mm Weight: 31kg SMA is one of the world's leading manufacturers of inverters and energy storage solutions: SMA is characterized by innovation, cutting-edge technology and maximum customer support. The manufacturer of high-quality products from Niestetal (Germany) impresses with innovative technology for the decentralized, digital and renewable energy supply of tomorrow. With over 35 years of experience, SMA has made a significant contribution to the development of renewable energies and is constantly expanding this expertise.
€2.339,00
You have seen 360 out of 375 products