Solar technology
-
Victron Victron Smartsolar Mppt 100/50 50a 12V/24V solar loader
The Victron Energy SmartSolar Mppt 100/50 50a 12V/24V solar Loader (MPN SCC110050210), is the new version of the Bluesolar 100/50. The smart version differs only in the Blue version, primarily by the permanently integrated Bluetooth communication module. This allows the SmartSolar-Loader Completely monitor and analyze on each app-enabled device. The VICTRON Connect app required for this can be installed free of charge. Optionally, the MPPT Wirbox-M from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 100/50 50a 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport high maximum efficiency of 98% For 12V and 24V systems Integrated Bluetooth module 50a maximum charging current Fully programmable loading algorithms that can later be activated and used manually via a switch on the housing 100V maximum PV empty voltage 700W maximum PV power at 12V, 1400W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Day/night-time control and light insulation option More protection compared to the smaller models of the SmartSolar Mppt seriesCompared to the 75/10, 75/15 and 100/15 model, the SmartSolar 100/30 has Mppt Via overheating protection with a switch-off function and automatic recovery after reaching a normal operating temperature.Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 100/50 has some other innovative technologies such as VE.Direct Communication. Options for programming, data in real time and display of the courseModern Apple and Android smartphones, tablets, macbooks and other devices can be used, for example, via the integrated Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Flexible loading algorithmsFully programmable loading algorithm (also note the software page on our website) and eight pre-programmed algorithms that can be selected using a rotary knob (further details can be found in our manual).Scope of delivery: 1x Victron Energy SCC110050210 SmartSolar Mppt 100/50 50a 12V/24V solar Loader1x operating instructions
€167,00
-
Victron Victron Energy Meter EM540 3 Phasig Energy Measure Tan - Max 65a/Phase
The electricity meter Victron EM540 (MPN Rel200100100) is designed to monitor three-phase operating modes, for example PV inverter, ACoric unit or inverter. In this way you can measure the performance and energy of the entire system as a direct measurement in the distribution box. The Victron EM540 uses a higher sampling speed compared to the EM24. It is suitable as a supplement to an inverter/charger from Victron. The device offers two options for connecting to a GX device: Cable connection via RS485-to-USB interface with a cable length of 1.8m or 5m Wireless connection via Zigbee-to-USB and Zigbee-to-RS485 converter The article at a glance Usable as a network meter and as a tax input for an eating system Can be used to measure the performance of a PV inverter or an ACoric unit Support of different types of energy counters Use for displaying the data on a GX device Technical data: Manufacturer number number: Rel200100100 Display: LCD Phases: suitable for 3 phases Max. Nominal current: 65a pro phase Mass type: Direct/Shunt Communication: RS485 Scope of delivery: 1x Victron Energy EM540 Energy Meter 3-Phasig (Rel200100100)
€133,00
-
Victron Victron Blue Smart IP22 12/30 (1) Charger 12V 30A 1 battery
The Blue Smart IP22 12/30 (1) charger of Victron Energy (MPN BPC123047002), is a professional, compact 12V 30A battery charger of the latest generation with a charging output and built -in Bluetooth! The Blue Smart IP22 12/30 (1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/30 (1) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-downloaded "dead" batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 12/30 (1) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 12/30 (1) Blue Smart IP22 Charger Victron part number: BPC123042002 Lades 12V lead-acid, gel, agm and lithium batteries 30a maximum charging current 1 battery charging output Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other performance features of the 12/30 (1) Blue Smart IP22 battery loader Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 12/30 (1) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 12V battery) in order to minimize the gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC123047002 12/30 (1) IP22 Blue Smart Charger1x operating instructions
€197,00
-
Victron VICTRON VM-3P75CT Energy meter 3-phase electricity meter 75a/phase
The Multiplus-II 48/5000/70-50 is a high-end device combination of Victron Energy (MPN: PMP482505010) combines the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 100 A and the potential area of application extends to eating applications. The inverter module provides a whopping 5000 W or 4000 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, with which it can be switched back and forth between the AC connections. Important performance features of the Multiplus-II 48/5000/70-50 PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* Technical features 5000 W power with non -linear load 4000 W continuous load and 9000 W Top output For 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 48/5000/70-50. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failure The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Many options for system expansion The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel. Configuration and monitoring remotely Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed. Scope of delivery: 1x Victron PMP482505010 Multiplus-II 48/5000/70-50a1x operating instructions
€222,00
-
Victron Victron Multiplus-II 48/5000/70-50 230V
The Multiplus-II 48/5000/70-50 is a high-end device combination of Victron Energy (MPN: PMP482505010) combines the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 100 A and the potential area of application extends to eating applications. The inverter module provides a whopping 5000 W or 4000 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, with which it can be switched back and forth between the AC connections. Important performance features of the Multiplus-II 48/5000/70-50 PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* Technical features 5000 W power with non -linear load 4000 W continuous load and 9000 W Top output For 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 48/5000/70-50. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failure The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Many options for system expansion The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel. Configuration and monitoring remotely Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed. Scope of delivery: 1x Victron PMP482505010 Multiplus-II 48/5000/70-50a1x operating instructions
€933,00
-
Victron Victron Energy Lynx Power in (M8)
The Victron Lynx Power in-module (MPN LYN020102000) is used to connect batteries via an external backup. This can be useful if you have several parallel strings. Due to the extremely high short -circuit current potential of most batteries, it is recommended to use an external safety system with a suitable error vacuum assessment (e.g. an NH HRC). Properties of the Victron Lynx Power in 1000a Negative and positive DC collecting rail Easy installation Part of the modular Lynx distribution system Construction The power in module contains a negative and a positive DC collection rail with M8 screws to connect the battery cables. Cables with a diameter of up to 22mm can be guided through the lower introductions and over the two side connections. Scope of delivery: 1x victron lynx power in
€127,00
-
Victron Victron Smartsolar Mppt 100/20-48 20a 12V 24V 48V solar loader
The SmartSolar 100/20-48 from Victron Energy (MPN SCC110020160R) is one Mppt Solar Loader With 20A max. Charging current for charging 12V, 24V and 48V batteries. In contrast to the Bluesolar version, the Smart version has integrated Bluetooth, which makes buying a Bluetooth Dongles superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection. The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 100-20 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. The most important technical properties at an overview 20a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 290W Nominal PV performance at 24V systems: 580W Nominal PV performance at 48V systems: 1160W 20a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 100V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth module Ultra -fast Maximum Power Point Tracking Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Intelligent load exit A deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof. Battery Life: Intelligent battery management If the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-saucle battery within a few weeks or months. The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery: 1x Victron Energy SmartSolar Mppt 100/20-48 20a 12V 24V 48V solar Loader1x operating instructions Notice The device shows the print 48V - on the packaging of the device the data sheet of the 48V version is printed on the side. Contrary to this confusing information on the device itself, this is suitable for both 12V and 24V - and now now also for 48V batterys. Until recently, these were still separate devices - one for 12V/24V and one for 48V - these two were now summarized and the printing on the housing and packaging from the 48V version was taken over
€81,00
-
Victron Victron Smartsolar Mppt 75/15 15a 12V 24V solar loader
The SmartSolar 75/15 from Victron Energy (MPN SCC075015060R) is one Mppt Solar Loader With 15a max. Charging current for charging 12V and 24V batteries. In contrast to the Bluesolar 75/15, the Smart version has integrated Bluetooth, which makes buying a Bluetooth dongels superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection.The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 75-10/15 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch.The most important technical properties at an overview 15a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 220W Nominal PV performance at 24V systems: 440W 15a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 75V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth modu Ultra -fast Maximum Power Point TrackingEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %.Intelligent load exitA deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof.Battery Life: Intelligent battery managementIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-acid battery within a few weeks or months.The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week. Number of charging outputs: 1 Battery type adjustable: Support of all common battery types Self -consumption in standby: 10mA Guarantee: 5 years Weight: 0.5 kg Manufacturer: Victron Energy Type of charge: Mppt Product type 1: MPPT loader 15a for 12V and 24V batteries with integrated Bluetooth and extensive setting options as well as an intelligent load exit. Protection class (IP): IP43 (electronic components) IP22 (connection area) Protection functions: Battery reolving fuse outdoor, output ceiling closure, overtemp. Solar module current (max.): 15a Ambient temperature: -30 ° C - +60 ° C Scope of delivery:1x Victron Energysc075015060R SmartSolar Mppt 75/15 15a 12V 24V solar Loader1x operating instructions
€61,00
-
Fronius Fronius Symo Gen24 10.0 Plus
The Fronius Symo Gen24 series convinces with a variety of integrated features that make the hearts of private system owners beat faster. Communication via WLAN and Ethernet as well as the simple and quick integration of third-party components offer high flexibility with other software and hardware products. The standard -based basic emergency power supply PV Point guarantees security of supply and the greatest possible independence. Thanks to the Multi Flow Technology, longer emergency power supply and higher self -consumption are made possible. Open interfaces can be easily integrated by third-party components. Optionally, Fronius offers a full backup emergency flow function for operation of heat pumps. Your advantages Various emergency power variants Multi-flow technology Energy management functions Standard WLAN connection Quick easy assembly and commissioning Product specification: DC switch-on voltage: 80 V Maximum input current (MPPT1 / MPPT2): 25a / 12.5a Maximum AC performance: 10,000 VA Density class: IP66 Standard manufacturer's guarantee: 10 Years Easy installation and operation Save installation time and costs thanks to 180 ° fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.799,00
-
Fronius Fronius Symo Gen24 8.0 Plus
Product specification: DC hint tension: 80 V Maximum input current (MPPT1 / MPPT2): 25a / 12.5a Maximum alternating current performance: 8000 VA Density class: IP66 Standard manufacturer's guarantee: 2 years Easy installation and operation Save installation time and costs thanks to 180o fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.499,00
-
Fronius Fronius Symo Gen24 6.0 Plus
Product specification: DC hint tension: 80 V Maximum input current (MPPT1 / MPPT2): 25a / 12.5a Maximum alternating current performance: 6000 VA Density class: IP66 Standard manufacturer's guarantee: 2 Years Easy installation and operation Save installation time and costs thanks to 180o fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.563,08
-
Fronius Fronius Symo Gen24 4.0 Plus
Product specification: DC hint tension: 80 V Maximum input current (MPPT1 / MPPT2): 12.5 A / 12.5 a Maximum alternating current performance: 4000 va Density class: IP66 Standard manufacturer's guarantee: 2 Years Easy installation and operation Save installation time and costs thanks to 180º fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.201,68
-
Fronius Fronius Ohmpilot 9.0-3
Fronius Ohmpilot 9.0-3 The Fronius Ohmpilot is a consumer controller to use excess solar energy for hot water preparation. Thanks to the infinitely adjustable power of 0 to 9 kW, excess PV energy can be used for highly efficient use and supply of household consumers. Ohmpilot is primarily used to control heating bars for hot water preparation in boilers and buffer stores, but can also be used for infrared heaters or bathroom radiators. A single -family house with average water consumption can therefore cover the majority of hot water requirements from April to October with solar energy. The result is a maximum of self-sufficiency, reduced CO2 emissions in the household and the loss of the building of the building of the building in the summer months.
€749,00
-
Fronius Fronius DataManager 2.0 Galvo Symo-Primo
The Fronius DataManager is a versatile communication control panel for Fronius inverter. By connecting to the Internet via a LAN or WLAN interface, the "Fronius DataManager" transmits the values of a photovoltaic system directly to the online portal "Fronius Solar.web", which means that you have full control over the operation of the system at any time. With the Fronius DataManager, inverter can be connected directly to the Internet for the first time via a WLAN interface. The optimal monitoring of the plant operation and the configuration of the Fronius DatanManager is possible via a separate web interface on the server integrated in the device.
€299,78
-
Pylontech Pylontech Force H2 BMS FC0500M -40S - control module
The Pylontech Force H2 BMS FC0500M-40S Is the central control module for the modular high-voltage battery storage system Pylontech Force H2. It monitors and protects the connected battery modules and ensures safe and efficient operation of the entire system. Main characteristics Modular designEnables the storage system to be easily expanded by stacking 2 to 4 battery modules pro Tower, which means a total capacity of 7.1 kWh to 14.2 kWh can be achieved. Extended protective functionsThe BMS offers protection against deep discharge, overloading, overvoltage, overflow, over and under temperature, short circuit as well as reversal and thus ensures maximum operational safety. Intuitive operationAn integrated control panel with LED displays enables the system status to be monitored and the setting of the communication speed (baud rate). Width compatibilitySupports communication protocols such as CAN and Modbus and is compatible with numerous marketing inverters of leading manufacturers. Robust constructionDue to the protection class IP55, the system is suitable for both indoor and external installations. Technical data Model: FC0500M-40SDimensions (L × W × H): 450 × 296 × 190 mmWeight: 12 kgCommunication: Can, ModbusProtection class: IP55Guarantee: 5 years of manufacturer's guarantee Scope of delivery 1 × Pylontech Force H2 BMS FC0500M-40S control module The Pylontech Force H2 BMS FC0500M-40S is the perfect solution for everyone who is looking for a reliable, scalable and durable high-voltage battery system for private or commercial applications. The intelligent control and high compatibility ensure efficient and future -proof energy management.
€866,58
-
Pylontech Pylontech Force H2 battery module FH9637M 96V 3.55kWh
The Pylontech Force H2 battery module FH9637M is a high-quality high-voltage lithium memory module, specially developed for modular energy storage systems in the private and commercial sector. With a capacity of 3.55 kWh And a nominal voltage of 96 V offers a reliable and efficient solution for network -coupled and hybrid photovoltaic systems. Characteristics Modular design: expandable by stacking up to four modules pro Tower, for total capacities of 7.1 kWh to 14.2 kWh High cycle strength: up to 6,000 charging cycles at 95 % discharge depth for a particularly long service life Safe and robust: Lithium iron phosphate (Lifepo₄) cells with integrated BMS (battery management system) for optimal protection against overloading, deep discharge, overflow and overheating Width compatibility: supports CAN and Modbus Communication protocols, compatible with many custom-market inverters Easy installation: Compact construction and stackable design enable a space -saving and uncomplicated assembly Technical data Model: FH9637MCapacity: 3.55 kWhNominal voltage: 96 VNominal capacity: 37 AhMaximum discharge current: 18.5 aDimensions (W × H × D): 450 × 296 × 296 mmWeight: 35 kgOperating temperature range: 0 ° C to +50 ° CProtection class: IP55Communication: Can, ModbusCycles life: up to 6,000 cycles (at 95 % DOD)Guarantee: 10 years of manufacturer's guarantee Scope of delivery 1 × Pylontech Force H2 FH9637M cordless module Notice A separate BMS control module is required for operation, for example the Pylontech FC0500M-40S. The Pylontech Force H2 FH9637M offers an ideal solution for everyone who is looking for a powerful, flexible and durable energy storage system to efficiently maximize the self -consumption of solar power.
€1.441,18
-
BYD BYD control unit set 12.8KWH, base + 5x BYD HVS 2.56 kWh battery
The kit consists of: 1 x BYD Battery Box Premium HV BCU (control unit) + base 5 x BYD 2.56 KWH HVS battery module
€5.258,00
-
BYD BYD control unit set 10.2KH, base + 4x BYD HVS 2.56 kWh battery
The kit consists of: 1 x BYD Battery Box Premium HV BCU (control unit) + base 4 x BYD 2.56 KWH HVS battery module
€4.499,00
-
BYD BYD control unit set 7.7KWH, base + 3x BYD HVS 2.56 kWh battery
The kit consists of: 1 x BYD Battery Box Premium HV BCU (control unit) + base 3 x BYD 2.56 KWH HVS battery module
€3.645,00
-
BYD BYD control unit set 5.1kWh, base + 2x BYD HVS 2.56 kWh battery
BYD 2.56 kWh HVS battery module. Suitable for powerful emergency power supply and network -independent functions. Superior performance with real high-voltage series circuit. The kit consists of: 1 x BYD Battery Box Premium HV BCU (control unit) + base 2 x BYD 2.56 KWH HVS battery module
€2.750,00
-
BYD BYD 2.56 KWH HVS battery module
The BYD 2.56 kWh HVS battery module is a highly developed energy storage product designed for use in the BYD-Battery Box Premium HVS home battery. It is a modular design that makes it possible to expand the storage capacity if necessary by simply adding additional modules. This premium battery module is equipped with a long-lasting lithium-iron-phosphate battery, which has a battery efficiency of over 96 % and is compatible with leading PV versions, which makes it suitable for use with powerful versectors. An individual HVS battery module can operate up to five modules in a row in a battery tower, and for larger storage capacity it is possible to cascade up to three such battery towers in order to a total of 38.4 kWh to reach. The dimensions of the module are 585x23x298 mm at a weight of 38 kg, and it has a nominal voltage of 102.4 volts with a usable capacity of 2.56 kWh pro Module. In addition, the module with a maximum output current of 25 A and a peak output current of 50 A is specified for 5 seconds, which underlines the high performance and reliability. It has protection class IP 55, which makes it dust and splash-proof. Modular growth: Easy to add modules to expand the storage capacity, perfect for the gradual expansion of the home storage solution. Highly efficient: Over 96 % battery efficiency with compatibility to leading PV clients, optimized for use in powerful systems. Extended storage options: Possibility of cascading several battery towers for a total capacity of up to 38.4 kWh. Robust and safe construction: Durable lithium-iron-phosphate cells with a protection class of IP 55, suitable for demanding environments.
€985,00
-
Huawei Huawei Luna2000-5KW-C0 control module
Huawei Luna2000 control module The intelligent Luna2000 energy storage system from Huawei is a flexible investment that enables you to expand the memory from 5KWH to up to 30 kWh. The solution can be used both in the household and in the company. To complete the energy storage, you have to buy: Huawei Luna2000 Battery 5KWh Huawei dtsu 666-H intelligent electricity meter Parameter: Performance module-Luna2000-5KW-C0 Number of control modules - 1 Nominal voltage (1 -phase system) - 360V Operating voltage area (single -phase system) - 350-560V Nominal voltage (three -phase system) - 600V Operating voltage area (three -phase system) - 600-980V
€1.040,78
-
Huawei Huawei counter dtsu 666-h 3-phase
The DTSU666-H Smart Power Sensor power meter from Huawei is a high-precision device that was specially developed for monitoring and measuring electrical parameters in a 3-phase power supply system. It is known for its simple handling, intuitive operation and precise measurements. Here are the most important technical parameters and features of the device: The device has an LCD display that enables the measured values clear and easy to read. The total power consumption of the measuring device is very low with ≤ 1 w, which makes it an energy -efficient choice for monitoring and measuring electrical parameters.
€233,48
-
Huawei Huawei Wallbox 22KW
The Huawei Smart Charger is an advanced solution for charging electric cars, which is specially designed to efficiently use solar energy. This device offers a variety of functions that make it both user -friendly and technically progressive: Solar companies: The charger can supply your car with electricity from solar energy, which is an environmentally friendly and cost -efficient way to charge your vehicle. Automatic switching between 1 phase and 3 phases: This function enables flexible adaptation to different power supply conditions, which means that the charger can be used in different electrical environments. 3-way authentication: Security is increased by using three different authentication methods - Bluetooth, RFID and an app. This ensures that only legitimate users have access to the charging process. Automatic detection and setting: The smart charger can automatically identify the connected vehicle and adjust the loading settings accordingly, which ensures optimal efficiency and user -friendliness. Full control by an app: Users can use a special app to monitor and control the charging process, which offers additional convenience and control. Fast installation: The construction of the charger is designed in such a way that a quick and uncomplicated installation is possible. 22kW output: With an output of 22KW, the Charger offers a quick charging speed, which is particularly advantageous for users who have little time and want to quickly charge their vehicle.
€1.105,00
They have 264 from 307 Seen products