Solar technology
-
Victron VICTRON VM-3P75CT Energy meter 3-phase electricity meter 75a/phase
The Multiplus-II 48/5000/70-50 is a high-end device combination of Victron Energy (MPN: PMP482505010) combines the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 100 A and the potential area of application extends to eating applications. The inverter module provides a whopping 5000 W or 4000 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, with which it can be switched back and forth between the AC connections. Important performance features of the Multiplus-II 48/5000/70-50 PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* Technical features 5000 W power with non -linear load 4000 W continuous load and 9000 W Top output For 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 48/5000/70-50. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failure The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Many options for system expansion The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel. Configuration and monitoring remotely Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed. Scope of delivery: 1x Victron PMP482505010 Multiplus-II 48/5000/70-50a1x operating instructions
€222,00
-
Victron Victron Multiplus-II 48/5000/70-50 230V
The Multiplus-II 48/5000/70-50 is a high-end device combination of Victron Energy (MPN: PMP482505010) combines the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 100 A and the potential area of application extends to eating applications. The inverter module provides a whopping 5000 W or 4000 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, with which it can be switched back and forth between the AC connections. Important performance features of the Multiplus-II 48/5000/70-50 PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* Technical features 5000 W power with non -linear load 4000 W continuous load and 9000 W Top output For 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 48/5000/70-50. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failure The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Many options for system expansion The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel. Configuration and monitoring remotely Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed. Scope of delivery: 1x Victron PMP482505010 Multiplus-II 48/5000/70-50a1x operating instructions
€933,00
-
Victron Victron Energy Lynx Power in (M8)
The Victron Lynx Power in-module (MPN LYN020102000) is used to connect batteries via an external backup. This can be useful if you have several parallel strings. Due to the extremely high short -circuit current potential of most batteries, it is recommended to use an external safety system with a suitable error vacuum assessment (e.g. an NH HRC). Properties of the Victron Lynx Power in 1000a Negative and positive DC collecting rail Easy installation Part of the modular Lynx distribution system Construction The power in module contains a negative and a positive DC collection rail with M8 screws to connect the battery cables. Cables with a diameter of up to 22mm can be guided through the lower introductions and over the two side connections. Scope of delivery: 1x victron lynx power in
€127,00
-
Victron Victron Smartsolar Mppt 100/20-48 20a 12V 24V 48V solar loader
The SmartSolar 100/20-48 from Victron Energy (MPN SCC110020160R) is one Mppt Solar Loader With 20A max. Charging current for charging 12V, 24V and 48V batteries. In contrast to the Bluesolar version, the Smart version has integrated Bluetooth, which makes buying a Bluetooth Dongles superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection. The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 100-20 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. The most important technical properties at an overview 20a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 290W Nominal PV performance at 24V systems: 580W Nominal PV performance at 48V systems: 1160W 20a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 100V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth module Ultra -fast Maximum Power Point Tracking Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Intelligent load exit A deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof. Battery Life: Intelligent battery management If the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-saucle battery within a few weeks or months. The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery: 1x Victron Energy SmartSolar Mppt 100/20-48 20a 12V 24V 48V solar Loader1x operating instructions Notice The device shows the print 48V - on the packaging of the device the data sheet of the 48V version is printed on the side. Contrary to this confusing information on the device itself, this is suitable for both 12V and 24V - and now now also for 48V batterys. Until recently, these were still separate devices - one for 12V/24V and one for 48V - these two were now summarized and the printing on the housing and packaging from the 48V version was taken over
€81,00
-
Victron Victron Smartsolar Mppt 75/15 15a 12V 24V solar loader
The SmartSolar 75/15 from Victron Energy (MPN SCC075015060R) is one Mppt Solar Loader With 15a max. Charging current for charging 12V and 24V batteries. In contrast to the Bluesolar 75/15, the Smart version has integrated Bluetooth, which makes buying a Bluetooth dongels superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection.The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 75-10/15 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch.The most important technical properties at an overview 15a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 220W Nominal PV performance at 24V systems: 440W 15a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 75V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth modu Ultra -fast Maximum Power Point TrackingEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %.Intelligent load exitA deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof.Battery Life: Intelligent battery managementIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-acid battery within a few weeks or months.The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week. Number of charging outputs: 1 Battery type adjustable: Support of all common battery types Self -consumption in standby: 10mA Guarantee: 5 years Weight: 0.5 kg Manufacturer: Victron Energy Type of charge: Mppt Product type 1: MPPT loader 15a for 12V and 24V batteries with integrated Bluetooth and extensive setting options as well as an intelligent load exit. Protection class (IP): IP43 (electronic components) IP22 (connection area) Protection functions: Battery reolving fuse outdoor, output ceiling closure, overtemp. Solar module current (max.): 15a Ambient temperature: -30 ° C - +60 ° C Scope of delivery:1x Victron Energysc075015060R SmartSolar Mppt 75/15 15a 12V 24V solar Loader1x operating instructions
€61,00
-
Fronius Fronius Symo Gen24 10.0 Plus
The Fronius Symo Gen24 series convinces with a variety of integrated features that make the hearts of private system owners beat faster. Communication via WLAN and Ethernet as well as the simple and quick integration of third-party components offer high flexibility with other software and hardware products. The standard -based basic emergency power supply PV Point guarantees security of supply and the greatest possible independence. Thanks to the Multi Flow Technology, longer emergency power supply and higher self -consumption are made possible. Open interfaces can be easily integrated by third-party components. Optionally, Fronius offers a full backup emergency flow function for operation of heat pumps. Your advantages Various emergency power variants Multi-flow technology Energy management functions Standard WLAN connection Quick easy assembly and commissioning Product specification: DC switch-on voltage: 80 V Maximum input current (MPPT1 / MPPT2): 25a / 12.5a Maximum AC performance: 10,000 VA Density class: IP66 Standard manufacturer's guarantee: 10 Years Easy installation and operation Save installation time and costs thanks to 180 ° fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.799,00
-
Fronius Fronius Symo Gen24 8.0 Plus
Product specification: DC hint tension: 80 V Maximum input current (MPPT1 / MPPT2): 25a / 12.5a Maximum alternating current performance: 8000 VA Density class: IP66 Standard manufacturer's guarantee: 2 years Easy installation and operation Save installation time and costs thanks to 180o fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.499,00
-
Fronius Fronius Symo Gen24 6.0 Plus
Product specification: DC hint tension: 80 V Maximum input current (MPPT1 / MPPT2): 25a / 12.5a Maximum alternating current performance: 6000 VA Density class: IP66 Standard manufacturer's guarantee: 2 Years Easy installation and operation Save installation time and costs thanks to 180o fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.563,08
-
Fronius Fronius Symo Gen24 4.0 Plus
Product specification: DC hint tension: 80 V Maximum input current (MPPT1 / MPPT2): 12.5 A / 12.5 a Maximum alternating current performance: 4000 va Density class: IP66 Standard manufacturer's guarantee: 2 Years Easy installation and operation Save installation time and costs thanks to 180º fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.201,68
-
Fronius Fronius Ohmpilot 9.0-3
Fronius Ohmpilot 9.0-3 The Fronius Ohmpilot is a consumer controller to use excess solar energy for hot water preparation. Thanks to the infinitely adjustable power of 0 to 9 kW, excess PV energy can be used for highly efficient use and supply of household consumers. Ohmpilot is primarily used to control heating bars for hot water preparation in boilers and buffer stores, but can also be used for infrared heaters or bathroom radiators. A single -family house with average water consumption can therefore cover the majority of hot water requirements from April to October with solar energy. The result is a maximum of self-sufficiency, reduced CO2 emissions in the household and the loss of the building of the building of the building in the summer months.
€749,00
-
Fronius Fronius DataManager 2.0 Galvo Symo-Primo
The Fronius DataManager is a versatile communication control panel for Fronius inverter. By connecting to the Internet via a LAN or WLAN interface, the "Fronius DataManager" transmits the values of a photovoltaic system directly to the online portal "Fronius Solar.web", which means that you have full control over the operation of the system at any time. With the Fronius DataManager, inverter can be connected directly to the Internet for the first time via a WLAN interface. The optimal monitoring of the plant operation and the configuration of the Fronius DatanManager is possible via a separate web interface on the server integrated in the device.
€299,78
-
Pylontech Pylontech Force H2 BMS FC0500M -40S - control module
The Pylontech Force H2 BMS FC0500M-40S Is the central control module for the modular high-voltage battery storage system Pylontech Force H2. It monitors and protects the connected battery modules and ensures safe and efficient operation of the entire system. Main characteristics Modular designEnables the storage system to be easily expanded by stacking 2 to 4 battery modules pro Tower, which means a total capacity of 7.1 kWh to 14.2 kWh can be achieved. Extended protective functionsThe BMS offers protection against deep discharge, overloading, overvoltage, overflow, over and under temperature, short circuit as well as reversal and thus ensures maximum operational safety. Intuitive operationAn integrated control panel with LED displays enables the system status to be monitored and the setting of the communication speed (baud rate). Width compatibilitySupports communication protocols such as CAN and Modbus and is compatible with numerous marketing inverters of leading manufacturers. Robust constructionDue to the protection class IP55, the system is suitable for both indoor and external installations. Technical data Model: FC0500M-40SDimensions (L × W × H): 450 × 296 × 190 mmWeight: 12 kgCommunication: Can, ModbusProtection class: IP55Guarantee: 5 years of manufacturer's guarantee Scope of delivery 1 × Pylontech Force H2 BMS FC0500M-40S control module The Pylontech Force H2 BMS FC0500M-40S is the perfect solution for everyone who is looking for a reliable, scalable and durable high-voltage battery system for private or commercial applications. The intelligent control and high compatibility ensure efficient and future -proof energy management.
€866,58
-
Pylontech Pylontech Force H2 battery module FH9637M 96V 3.55kWh
The Pylontech Force H2 battery module FH9637M is a high-quality high-voltage lithium memory module, specially developed for modular energy storage systems in the private and commercial sector. With a capacity of 3.55 kWh And a nominal voltage of 96 V offers a reliable and efficient solution for network -coupled and hybrid photovoltaic systems. Characteristics Modular design: expandable by stacking up to four modules pro Tower, for total capacities of 7.1 kWh to 14.2 kWh High cycle strength: up to 6,000 charging cycles at 95 % discharge depth for a particularly long service life Safe and robust: Lithium iron phosphate (Lifepo₄) cells with integrated BMS (battery management system) for optimal protection against overloading, deep discharge, overflow and overheating Width compatibility: supports CAN and Modbus Communication protocols, compatible with many custom-market inverters Easy installation: Compact construction and stackable design enable a space -saving and uncomplicated assembly Technical data Model: FH9637MCapacity: 3.55 kWhNominal voltage: 96 VNominal capacity: 37 AhMaximum discharge current: 18.5 aDimensions (W × H × D): 450 × 296 × 296 mmWeight: 35 kgOperating temperature range: 0 ° C to +50 ° CProtection class: IP55Communication: Can, ModbusCycles life: up to 6,000 cycles (at 95 % DOD)Guarantee: 10 years of manufacturer's guarantee Scope of delivery 1 × Pylontech Force H2 FH9637M cordless module Notice A separate BMS control module is required for operation, for example the Pylontech FC0500M-40S. The Pylontech Force H2 FH9637M offers an ideal solution for everyone who is looking for a powerful, flexible and durable energy storage system to efficiently maximize the self -consumption of solar power.
€1.441,18
-
BYD BYD control unit set 12.8KWH, base + 5x BYD HVS 2.56 kWh battery
The kit consists of: 1 x BYD Battery Box Premium HV BCU (control unit) + base 5 x BYD 2.56 KWH HVS battery module
€5.258,00
-
BYD BYD control unit set 10.2KH, base + 4x BYD HVS 2.56 kWh battery
The kit consists of: 1 x BYD Battery Box Premium HV BCU (control unit) + base 4 x BYD 2.56 KWH HVS battery module
€4.499,00
-
BYD BYD control unit set 7.7KWH, base + 3x BYD HVS 2.56 kWh battery
The kit consists of: 1 x BYD Battery Box Premium HV BCU (control unit) + base 3 x BYD 2.56 KWH HVS battery module
€3.645,00
-
BYD BYD control unit set 5.1kWh, base + 2x BYD HVS 2.56 kWh battery
BYD 2.56 kWh HVS battery module. Suitable for powerful emergency power supply and network -independent functions. Superior performance with real high-voltage series circuit. The kit consists of: 1 x BYD Battery Box Premium HV BCU (control unit) + base 2 x BYD 2.56 KWH HVS battery module
€2.750,00
-
BYD BYD 2.56 KWH HVS battery module
The BYD 2.56 kWh HVS battery module is a highly developed energy storage product designed for use in the BYD-Battery Box Premium HVS home battery. It is a modular design that makes it possible to expand the storage capacity if necessary by simply adding additional modules. This premium battery module is equipped with a long-lasting lithium-iron-phosphate battery, which has a battery efficiency of over 96 % and is compatible with leading PV versions, which makes it suitable for use with powerful versectors. An individual HVS battery module can operate up to five modules in a row in a battery tower, and for larger storage capacity it is possible to cascade up to three such battery towers in order to a total of 38.4 kWh to reach. The dimensions of the module are 585x23x298 mm at a weight of 38 kg, and it has a nominal voltage of 102.4 volts with a usable capacity of 2.56 kWh pro Module. In addition, the module with a maximum output current of 25 A and a peak output current of 50 A is specified for 5 seconds, which underlines the high performance and reliability. It has protection class IP 55, which makes it dust and splash-proof. Modular growth: Easy to add modules to expand the storage capacity, perfect for the gradual expansion of the home storage solution. Highly efficient: Over 96 % battery efficiency with compatibility to leading PV clients, optimized for use in powerful systems. Extended storage options: Possibility of cascading several battery towers for a total capacity of up to 38.4 kWh. Robust and safe construction: Durable lithium-iron-phosphate cells with a protection class of IP 55, suitable for demanding environments.
€985,00
-
Huawei Huawei counter dtsu 666-h 3-phase
The DTSU666-H Smart Power Sensor power meter from Huawei is a high-precision device that was specially developed for monitoring and measuring electrical parameters in a 3-phase power supply system. It is known for its simple handling, intuitive operation and precise measurements. Here are the most important technical parameters and features of the device: The device has an LCD display that enables the measured values clear and easy to read. The total power consumption of the measuring device is very low with ≤ 1 w, which makes it an energy -efficient choice for monitoring and measuring electrical parameters.
€233,48
-
Huawei Huawei Sun 2000-600W-P optimizer
Huawei Sun 2000-600W-P optimizer -The product is characterized by its versatility, which makes it considerably easier to select the installation components -Optimizer can be quickly connected to the inverter (less than 1.5 minutes) -Automatic assignment of the modules so that you can monitor the operating parameters of each module that is equipped with the optimizer -The use of the optimizer enables a quick diagnosis and a problem -free and safe maintenance of the system. The installation of the optimizer ensures more efficiency, active protection and higher comfort when operating the PV system.
€117,91
-
Huawei Huawei Sun 2000-450W-P2 Optimizer
Huawei Sun 2000-450W-P optimizer The product is characterized by its versatility, which makes it considerably easier to select the installation components The optimizer can be quickly connected to the inverter (less than 1.5 minutes). Automatic assignment of the modules so that the operating parameters can be monitored in any module equipped with the optimizer The use of the optimizer enables a quick diagnosis and a problem -free and safe maintenance of the system. The installation of an optimist ensures more efficiency, active protection and increased comfort when operating PV systems.
€110,75
-
Huawei Huawei Smart Dongle-WLAN-FE (WIFI)
Interface for the remote configuration of Huawei Cversed. The Huawei Smart Dongle WLAN-FE Dongle is the connection between the Huawei Sun2000 M0 inverter and the Internet. The Huawei Fusion Solar portal enables the user to monitor the operation of the system. Up to 10 Huawei-Inverters can be connected to RS485 interface via a WLAN dongle. Product features Huawei Smart Dongle-WLAN-FE (WIFI) Communication via WLAN and Fast Ethernet (FE) Support for third -party surveillance systems "Plug & Play" Supports up to 10 devices Support for automatic re -connection
€138,58
-
Huawei Huawei Smart Dongle-4g
Interface for the remote configuration of Huawei interrichment over WiFi. The Huawei Smart Dongle 4G Dongle is the connection between the Huawei Sun2000 M0 Inverter and the Internet. The Huawei Fusion Solar Portal enables the user to monitor the operation of the system. Up to 10 Huawei-Inverters can be connected to RS485 interface via a WLAN dongle. In this case, the inverter takes on the role of the RS485 master with the WLAN dongle. Product features of the Huawei Smart Dongle 4G LTE USB dongle LED display 4G LTE mobile radio standard External LED display for displaying the registration status External design, easy to replace Protection class IP65, housing resistant to bad weather conditions, which increases stability Plag and Play version, no external power supply required, easy to install Maximum number of supported devices: 10
€220,48
-
Huawei Huawei Back Up Box B1 - for WR M1 series
Huawei Backup Box B1 Backup current module for three-phase inverter of the Huawei M1 series. The Backup Box B1 is used in roof PV systems to control the network and island operating status of the three-phase inverter of the Huawei M1 series. In the event of a network failure, the inverter switches to the island operation and does not supply electricity to the network connected to the network in backup mode. When the network failure has been remedied, the inverter switches back into the mesh -coupled condition. The Backup Box B1 supports the following network systems: TN-S / TN-C-S / TT. When installing the Backup Box B1 outdoors, avoid being exposed to direct sunlight. It is recommended to install them in a protected place or to provide them with a cover. In the circuit of the backup box B1, an SPD overvoltage protection device must be installed on the side of the power grid. Basic features: Emergency power module for three-phase inverter of the Huawei M1 series Separate single -phase circuit, maximum output 3.3kva, IP 65, weight 11.00 kg. Compatible with Huawei Change Model M0 and M1 Reliable 1-phase emergency power supply Automatic detection of a network failure and switching on battery Luna2000 Maximum apparatus 3.3kva
€852,28
They have 312 from 335 Seen products