Welcome to our inverter category - your source for efficient energy conversion in your home. Discover our selection of solar change judges for your own home and PV Verlechen, perfect for your home. Our products guarantee maximum efficiency and are ideal for the self -consumption of solar power. Regardless of whether you opt for mesh-coupled or hybrid inverter, we offer high-quality solutions for your photovoltaic system. #Energiezukun 🌞🔌🌱🏡
Inverter
-
Victron Victron GX Touch 50 display panel for Cerbo GX
The GX Touch 50 display from Victron Energy (MPN BPP900455050) is the display accessories for the Cerbo GX communication center. The 5-inch touchscreen display offers an immediate overview of your system and allows you to be presented in no time at all. The display is easily connected to Cerbo GX via a cable. Its super -slim, waterproof design and easy installation offer a lot of flexibility. Properties of the GX Touch 50 5-inch touchscreen display Immediate system overview Easy attachment from above Connection via a cable The addition to the Cerbo GX The GX Touch 50 display is the ideal addition to yours Cerbo GX To optimally use the communication center. Use the Bluetooth capability directly via GX Touch 50 and optimize your system and make changes easily and quickly. Scope of delivery: 1x GX Touch 50 display1x HDMI USB connection cable1x assembly material
€199,00
-
Victron Victron Orion-Xs 12/12-50a 700W DC-DC Battery charger
The Orion-XS 12/12-50 700W Battery charger from Victron Energy (MPN Ori121217040) offers extensive remote monitoring and remote control options, which gives you complete control over your device and system. The Orion-Xs revolutionizes the adaptive DC DC shop from batteries. It was specially developed for use in dual battery systems that are loaded by an (intelligent) alternator. The innovative technology for cooling the aluminum board ensures an astonishing efficiency of 98 %without fans. The Orion-Xs acts both as a DC-DC battery charger and as a power source and offers a large input and output voltage area. This is particularly important for vehicles with an intelligent alternator in the Euro 5 or Euro 6 classes, which often delivers too low charging voltage, even if the engine runs or in situations with longer cables, as often occurred on boats and motorhomes, voltage waste can occur. In such scenarios, precise and controlled charging is essential to completely load the service battery and protect the starter/input battery from unloading. Important features of the Orion-X 12/12-50 700W fully configurable Detection of the engine shutdown Switching off at low temperature Efficient cooling Works with VictronConnect Optional remote monitoring IP65 protection class (dust and waterproof) adaptive four -stage loading algorithm With lead batteries, it is crucial to keep the constant voltage phase short in flat discharges in order to prevent the battery from overloading. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery charges completely. The Orion XS offers fully programmable loading algorithms and eight pre -programmed battery settings. Remote-controlled ON/OFF switch The Orion XS can be switched on and off via the connector to the remote-controlled on/off or switched on and off using the VictronConnect app. Typical applications are the cabling of a switch or a battery management system (BMS). Intelligent alternator compatibility An integrated mechanism determines whether the engine is running (engine shutdown detection), which means that the charger is only activated if the alternator delivers electricity. This ensures that the charger only receives electricity when the alternator delivers electricity, i.e. when the engine runs. Comprehensive electronic protection The protective functions include overload, short circuit and overtemperature. The charger is protected against overheating by reducing the output power when the maximum device temperature is reached. Parallel connection to increase the output current It is possible to switch any number of devices in parallel. Technical data Max. constant short -circuit current: 50A Continuous starting performance up to 40 ° C: 700W Input voltage area: 9-17V Regulated output voltage area: 10-17V Tolerance Output voltage: +/- 0.25% Max. Effect: 98.5% Electricity consumption without load: Electricity consumption in standby operation: Temperature range: -20 ° C to +60 ° C Moisture: Max. 95% not condensing Weight: 0.330kg Dimensions: 137.3mm x 123.1 x 40mm Scope of delivery 1x Victron Energy Orion-Xs 12/12 50 700W DC-DC Battery charger
€354,00
-
Victron Victron Smartsolar Mppt 100/50 50a 12V/24V solar loader
The Victron Energy SmartSolar Mppt 100/50 50a 12V/24V solar Loader (MPN SCC110050210), is the new version of the Bluesolar 100/50. The smart version differs only in the Blue version, primarily by the permanently integrated Bluetooth communication module. This allows the SmartSolar-Loader Completely monitor and analyze on each app-enabled device. The VICTRON Connect app required for this can be installed free of charge. Optionally, the MPPT Wirbox-M from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 100/50 50a 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport high maximum efficiency of 98% For 12V and 24V systems Integrated Bluetooth module 50a maximum charging current Fully programmable loading algorithms that can later be activated and used manually via a switch on the housing 100V maximum PV empty voltage 700W maximum PV power at 12V, 1400W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Day/night-time control and light insulation option More protection compared to the smaller models of the SmartSolar Mppt seriesCompared to the 75/10, 75/15 and 100/15 model, the SmartSolar 100/30 has Mppt Via overheating protection with a switch-off function and automatic recovery after reaching a normal operating temperature.Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 100/50 has some other innovative technologies such as VE.Direct Communication. Options for programming, data in real time and display of the courseModern Apple and Android smartphones, tablets, macbooks and other devices can be used, for example, via the integrated Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Flexible loading algorithmsFully programmable loading algorithm (also note the software page on our website) and eight pre-programmed algorithms that can be selected using a rotary knob (further details can be found in our manual).Scope of delivery: 1x Victron Energy SCC110050210 SmartSolar Mppt 100/50 50a 12V/24V solar Loader1x operating instructions
€167,00
-
Victron Victron Blue Smart IP22 12/30 (1) Charger 12V 30A 1 battery
The Blue Smart IP22 12/30 (1) charger of Victron Energy (MPN BPC123047002), is a professional, compact 12V 30A battery charger of the latest generation with a charging output and built -in Bluetooth! The Blue Smart IP22 12/30 (1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/30 (1) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-downloaded "dead" batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 12/30 (1) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 12/30 (1) Blue Smart IP22 Charger Victron part number: BPC123042002 Lades 12V lead-acid, gel, agm and lithium batteries 30a maximum charging current 1 battery charging output Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other performance features of the 12/30 (1) Blue Smart IP22 battery loader Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 12/30 (1) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 12V battery) in order to minimize the gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC123047002 12/30 (1) IP22 Blue Smart Charger1x operating instructions
€197,00
-
Victron Victron Multiplus-II 48/5000/70-50 230V
The Multiplus-II 48/5000/70-50 is a high-end device combination of Victron Energy (MPN: PMP482505010) combines the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 100 A and the potential area of application extends to eating applications. The inverter module provides a whopping 5000 W or 4000 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, with which it can be switched back and forth between the AC connections. Important performance features of the Multiplus-II 48/5000/70-50 PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* Technical features 5000 W power with non -linear load 4000 W continuous load and 9000 W Top output For 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 48/5000/70-50. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failure The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Many options for system expansion The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel. Configuration and monitoring remotely Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed. Scope of delivery: 1x Victron PMP482505010 Multiplus-II 48/5000/70-50a1x operating instructions
€933,00
-
Victron Victron Energy Lynx Power in (M8)
The Victron Lynx Power in-module (MPN LYN020102000) is used to connect batteries via an external backup. This can be useful if you have several parallel strings. Due to the extremely high short -circuit current potential of most batteries, it is recommended to use an external safety system with a suitable error vacuum assessment (e.g. an NH HRC). Properties of the Victron Lynx Power in 1000a Negative and positive DC collecting rail Easy installation Part of the modular Lynx distribution system Construction The power in module contains a negative and a positive DC collection rail with M8 screws to connect the battery cables. Cables with a diameter of up to 22mm can be guided through the lower introductions and over the two side connections. Scope of delivery: 1x victron lynx power in
€127,00
-
Victron Victron Smartsolar Mppt 100/20-48 20a 12V 24V 48V solar loader
The SmartSolar 100/20-48 from Victron Energy (MPN SCC110020160R) is one Mppt Solar Loader With 20A max. Charging current for charging 12V, 24V and 48V batteries. In contrast to the Bluesolar version, the Smart version has integrated Bluetooth, which makes buying a Bluetooth Dongles superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection. The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 100-20 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. The most important technical properties at an overview 20a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 290W Nominal PV performance at 24V systems: 580W Nominal PV performance at 48V systems: 1160W 20a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 100V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth module Ultra -fast Maximum Power Point Tracking Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Intelligent load exit A deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof. Battery Life: Intelligent battery management If the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-saucle battery within a few weeks or months. The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery: 1x Victron Energy SmartSolar Mppt 100/20-48 20a 12V 24V 48V solar Loader1x operating instructions Notice The device shows the print 48V - on the packaging of the device the data sheet of the 48V version is printed on the side. Contrary to this confusing information on the device itself, this is suitable for both 12V and 24V - and now now also for 48V batterys. Until recently, these were still separate devices - one for 12V/24V and one for 48V - these two were now summarized and the printing on the housing and packaging from the 48V version was taken over
€81,00
-
Victron Victron Smartsolar Mppt 75/15 15a 12V 24V solar loader
The SmartSolar 75/15 from Victron Energy (MPN SCC075015060R) is one Mppt Solar Loader With 15a max. Charging current for charging 12V and 24V batteries. In contrast to the Bluesolar 75/15, the Smart version has integrated Bluetooth, which makes buying a Bluetooth dongels superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection.The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 75-10/15 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch.The most important technical properties at an overview 15a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 220W Nominal PV performance at 24V systems: 440W 15a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 75V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth modu Ultra -fast Maximum Power Point TrackingEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %.Intelligent load exitA deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof.Battery Life: Intelligent battery managementIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-acid battery within a few weeks or months.The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week. Number of charging outputs: 1 Battery type adjustable: Support of all common battery types Self -consumption in standby: 10mA Guarantee: 5 years Weight: 0.5 kg Manufacturer: Victron Energy Type of charge: Mppt Product type 1: MPPT loader 15a for 12V and 24V batteries with integrated Bluetooth and extensive setting options as well as an intelligent load exit. Protection class (IP): IP43 (electronic components) IP22 (connection area) Protection functions: Battery reolving fuse outdoor, output ceiling closure, overtemp. Solar module current (max.): 15a Ambient temperature: -30 ° C - +60 ° C Scope of delivery:1x Victron Energysc075015060R SmartSolar Mppt 75/15 15a 12V 24V solar Loader1x operating instructions
€61,00
-
Fronius Fronius Symo Gen24 10.0 Plus
The Fronius Symo Gen24 series convinces with a variety of integrated features that make the hearts of private system owners beat faster. Communication via WLAN and Ethernet as well as the simple and quick integration of third-party components offer high flexibility with other software and hardware products. The standard -based basic emergency power supply PV Point guarantees security of supply and the greatest possible independence. Thanks to the Multi Flow Technology, longer emergency power supply and higher self -consumption are made possible. Open interfaces can be easily integrated by third-party components. Optionally, Fronius offers a full backup emergency flow function for operation of heat pumps. Your advantages Various emergency power variants Multi-flow technology Energy management functions Standard WLAN connection Quick easy assembly and commissioning Product specification: DC switch-on voltage: 80 V Maximum input current (MPPT1 / MPPT2): 25a / 12.5a Maximum AC performance: 10,000 VA Density class: IP66 Standard manufacturer's guarantee: 10 Years Easy installation and operation Save installation time and costs thanks to 180 ° fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.799,00
-
Fronius Fronius Symo Gen24 8.0 Plus
Product specification: DC hint tension: 80 V Maximum input current (MPPT1 / MPPT2): 25a / 12.5a Maximum alternating current performance: 8000 VA Density class: IP66 Standard manufacturer's guarantee: 2 years Easy installation and operation Save installation time and costs thanks to 180o fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.499,00
-
Fronius Fronius Symo Gen24 6.0 Plus
Product specification: DC hint tension: 80 V Maximum input current (MPPT1 / MPPT2): 25a / 12.5a Maximum alternating current performance: 6000 VA Density class: IP66 Standard manufacturer's guarantee: 2 Years Easy installation and operation Save installation time and costs thanks to 180o fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.563,08
-
Fronius Fronius Symo Gen24 4.0 Plus
Product specification: DC hint tension: 80 V Maximum input current (MPPT1 / MPPT2): 12.5 A / 12.5 a Maximum alternating current performance: 4000 va Density class: IP66 Standard manufacturer's guarantee: 2 Years Easy installation and operation Save installation time and costs thanks to 180º fast locking screws, spring clamps and simple wall assembly system. Commissioning: Fronius Solar.Start Quick and easy setup of any smartphone or tablet in just three steps. Updates possible at any time Open interfaces enable the easy integration of third -party components such as home automation systems. Intelligent monitoring with solar.web Monitor, analyze and compare different PV systems quickly and easily on your smartphone, tablet or laptop. Solar.web helps you to offer your customers the best service.
€2.201,68
-
SMA SMA STP Core1 50-41
The Sunny Tripower Core1 is the world's first free string inverter for decentralized roof and open space systems as well as covered parking spaces. The Core1 is the 3rd generation of the successful Sunny Tripower product line and revolutionizes the world of commercial inverter with its innovative concept. SMA engineers' stipulation was to combine a unique design and an innovative installation method in order to significantly increase the installation speed and to achieve an optimal return on investment for all target groups. From delivery to installation to operation, the Sunny Tripower Core1 enables comprehensive cost savings in logistics, workload, material and service. From now on, commercial PV installations are faster, safer and easier to realize than ever. Inexpensive Stand device with the lowest assembly effort No DC fuses required Integrated DC separation switch Consistently integrated Integrated WiFi access with any mobile device 12 direct string inputs reduce work and material expenditure AC/DC overvoltage protection (optional) • Argalbow protection function (AFCI) Shortest installation time Fast network connection through simple inverter configuration and commissioning Optimally accessible connection areas Maximum yields • Up to 150 % oversized PV generator Increased income without assembly effort through integrated shading management SMA Shadefix Technical features MPP voltage area 500 - 800 V Idle voltage 1,000 V Max. pro MPP tracker 120 a Number d. MPP tracker 6 AC 50,000 W Number d. Pie rabbits 3 dimension 569 x 733 x 621 mm Guarantee / warranty guarantee 5 years of manufacturer's guarantee - Note: The maximum guarantee period 15
€5.919,68
-
SMA SMA STP 10.0-3SE hybrid inverter 10kW Smart Energy
SMA Sunny Tripower 10.0 Smart Energy STP10.0-3SE Product specification: Storage system: Hybrid-WR Nominal output: 10,000 VA MPPT number: 2 MPP-MINDESTSTUNG: 280V Maximum MPP voltage: 800 V DC connection: Sunclix Dimensions: 173 mm x 500 mm x 598 mm Weight: 31 kg SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
€3.265,08
-
SMA SMA STP 8.0-3SE hybrid inverter 8KW Smart Energy
SMA Sunny Tripower 8.0 Smart Energy STP8.0-3SE Product specification: Storage system: Hybrid-WR Nominal output: 8000 VA MPPT number: 2 MPP-MINDESTSTUNG: 330V Maximum MPP voltage: 800 V DC connection: Sunclix Dimensions: 173 mm x 500 mm x 598 mm Weight: 31 kg SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
€2.238,08
-
SMA SMA STP 6.0-3SE hybrid inverter 6kW Smart Energy
SMA Sunny Tripower 6.0 Smart Energy STP6.0-3SE Product specification: Storage system: Hybrid-WR Nominal output: 6000 VA MPPT number: 2 MPP-MINDESTSTUNG: 250V Maximum MPP voltage: 800 V DC connection: Sunclix Dimensions: 173 mm x 500 mm x 598 mm Weight: 31 kg SMA is one of the world's leading manufacturers of inverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
€2.397,98
-
SMA SMA STP 5.0-3SE hybrid inverter 5KW Smart Energy
SMA Sunny Tripower 5.0 Smart Energy STP5.0-3SE Product specification: Storage system: Hybrid-WR Nominal output: 5000 VA MPPT number: 2 MPP-Mindest voltage: 210V Maximum MPP voltage: 800 V DC connection: Sunclix Dimensions: 173 mm x 500 mm x 598 mm Weight: 31 kg SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
€2.238,08
-
SMA SMA Sunny Tripower X 25 STP 25-50
SMA Sunny Tripower X 25 STP 25-50 Product specifications: Storage system: Na Nominal output: 25000 VA Number of MPPT: 3 MPP mini tension: 430V Mpp max. Voltage: 800V DC connection: Sunclix Dimensions: 266mm x 728mm x 762mm Weight: 35kg SMA Is one of the world's leading providers of inverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer support. The manufacturer of quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. In 35 years of experience, SMA has significantly shaped the development of renewable energies and continuously expands this competence.
€3.207,88
-
SMA SMA Sunny Tripower X 20 STP 20-50
SMA Sunny Tripower X 20 StP 25-50 Product specifications: Storage system: Na Nominal output: 20,000 VA Number of MPPT: 3 MPP-Minimal voltage: 340V Mpp max. Voltage: 800V DC connection: Sunclix Dimensions: 266mm x 728mm x 762mm Weight: 35kg SMA Is one of the world's leading providers of inverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer support. The manufacturer of quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. In 35 years of experience, SMA has significantly shaped the development of renewable energies and continuously expands this competence.
€3.192,28
-
SMA SMA Sunny Tripower X 15 StP 15-50
SMA Sunny Tripower X 15 StP 15-50 Product specification: Storage system: Na Nominal output: 15000 VA MPPT number: 3 MPP mini tension: 257V MPP maximum voltage: 800V DC connection: Sunclix Dimensions: 266mm x 728mm x 762mm Weight: 35kg SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has significantly shaped the development of renewable energies and continuously expands this competence. The SMA manufacturer's guarantee for these products automatically extends to 10 years from the product introduction or invoice date for the first warranty receiver if the warranty receiver registered the product within 12 months of the product introduction or invoice date for the first guarantee receiver on the SMA website (www.my.sma-service.com/S/Product Registration) and the product launch or the invoice date for the first guarantee receiver after April 1, 2021. (only applies to Spain, Poland, the Netherlands, Belgium and Luxembourg) or October 1, 2021 (worldwide). The product can be registered in Spain from May 1, 2021 and worldwide from October 1, 2021. The acquisition of the Active/Comfort guarantee extension after the SMA manufacturer's guarantee of 5 years (without product registration) is not possible for these products. Only in the event of proper product registration and the associated extension of the SMA manufacturer's guarantee to 10 years can the guarantee beer acquire the optional Active/ Comfort warranty extension in accordance with the conditions of Active/ Comfort guarantee extension for the years 11 - 20 of the products. The option of acquiring the Flex guarantee extension in accordance with the conditions of the Flex guarantee extension is still available to the warrantyer up to 10 years after commissioning or invoicing to the first guarantee. SMA expressly reserves the right to grant the Active/Comfort/Flex extension guarantee to the customer after the first check of the device to be covered.
€3.023,28
-
SMA SMA Sunny Tripower X 12 StP 12-50
SMA Sunny Tripower X 12 StP 12-50 Product specifications: Storage system: Na Nominal output: 12000 VA Number of MPPT: 3 MPP-Minimal voltage: 206V Mpp max. Voltage: 800V DC connection: Sunclix Dimensions: 266mm x 728mm x 762mm Weight: 35kg SMA Is one of the world's leading providers of inverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer support. The manufacturer of quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. In 35 years of experience, SMA has significantly shaped the development of renewable energies and continuously expands this competence. The SMA manufacturer's guarantee for these products is automatically extended to 10 years from the commissioning of the product or invoice date for the first warranty receiver if the warranty receiver registered the product within 12 months of the start of the product or invoice date for the first guarantee receiver on the SMA websitewww.my.sma-service.com/S/Product Registration) and the commissioning of the product or the invoice date for the first warranty receiver after April 1, 2021. (only applies to Spain, Poland, the Netherlands, Belgium and Luxembourg) or October 1, 2021 (worldwide). The product can be approved worldwide from May 1, 2021 in Spain and from October 1, 2021. The acquisition of the Active/Comfort guarantee extension after the SMA manufacturer's guarantee of 5 years (without product registration) is not possible for these products. Only in the event of proper product registration and the associated extension of the SMA manufacturer's guarantee to 10 years can the warranty receiver acquire the optional Active/ Comfort guarantee extension according to the conditions of Active/ Comfort guarantee extension for the years 11 - 20 of the products. The option of purchasing the Flex Garantia extension according to the conditions of the Flex Garantia extension is still available to the warranty receiver by the year 10 from the commissioning of the product or invoicing the first guarantee recipient. SMA expressly reserves the right to grant the customer the Active/Comfort/Flex guarantee extension after a first check of the device to be insured.
€2.817,88
-
SMA SMA STP 10.0-3AV-40, 3-phase
SMA STP 10.0-3AV-40, 3-phase Product specification: Storage system: Na Nominal output: 10,000 VA MPPT number: 2 MPP-MINDESTSTUNG: 320V Maximum MPP voltage: 800 V DC connection: Sunclix Dimensions: 176 mm x 470 mm x 435 mm Weight: 20.5 kg SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
€2.435,68
-
SMA SMA STP 8.0-3AV-40, 3-phase, without WiFi
SMA STP 8.0-3AV-40, 3-phase Product specification: Storage system: Na Nominal output: 8000 VA MPPT number: 2 MPP-MindestStlung: 260V Maximum MPP voltage: 800 V DC connection: Sunclix Dimensions: 176 mm x 470 mm x 435 mm Weight: 20.5 kg SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
€2.170,48
-
SMA SMA STP 6.0-3AV-40, 3-phase
SMA STP 6.0-3AV-40, 3-phase Product specification: Storage system: Na Nominal output: 6000 VA MPPT number: 2 MPP-MindestStlung: 260V Maximum MPP voltage: 800 V DC connection: Sunclix Dimensions: 176 mm x 470 mm x 435 mm Weight: 17 kg SMA Is one of the world's leading manufacturers of interverters and energy storage solutions: SMA is characterized by innovation, top -time technology and maximum customer care. The manufacturer of high -quality products from Niestetal (Germany) convinces with innovative technology for the decentralized, digital and renewable energy supply from tomorrow. With over 35 years of experience, SMA has contributed significantly to the development of renewable energies and is constantly expanding this competence.
€1.802,58
They have 192 from 198 Seen products