Welcome to our inverter category - your source for efficient energy conversion in your home. Discover our selection of solar change judges for your own home and PV Verlechen, perfect for your home. Our products guarantee maximum efficiency and are ideal for the self -consumption of solar power. Regardless of whether you opt for mesh-coupled or hybrid inverter, we offer high-quality solutions for your photovoltaic system. #Energiezukun 🌞🔌🌱🏡
Inverter
-
Victron Victron Multiplus 24/3,000/70-50 24V 230V 2400W 6000W inverter 70a charger
The multiplus 24/3000/70-50 from Victron (MPN PMP243021011) is a device combination of 24V 2400W sinus inverter and battery charger. The permanently integrated battery charger makes a considerable 70a which can also be fully charged even if the land/network current is available. The 24V Sinus voltage converter built into the multiplus converted its electricity from the battery into 230V AC. Thanks to the real sine wave, the electricity quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, a lightning -fast 50a transfer switch is also installed with which numerous network -coupled solutions can also be implemented. In addition to the Ve.Bus Port, a COM port is also available for system integration, which almost enables unlimited networking of the Multiplus.Comprehensive and flexible can be usedSince he also has a lightning -fast 50a transfer switch in addition to inverning people and charger, it is an ideal inverter for the areas of motorhome, boat or yacht and the network -coupled area of the uninterrupted power supply in the case of network fluctuations or power failures. Also for use in network -coupled self -consumption systems that only draw electricity from the supplier if the battery current is no longer sufficient or as a UPS solution in which the multiplus stipulate when the electricity suddenly fails from the network operator and thus ensure an uninterrupted power supply.Essential performance features of the Multiplus C 24/3000/70-50 2400W continuous output and 6000W peak output, for 24V battery voltage Device combination of inverter with transfer switch and 70a battery charger delivers the purest 230V sinus voltage and a clean 50Hz frequency Ve.Bus communication sport ensures extensive possibilities of networking, system integration, configuration and control of the multiplus devices from Victron. Support the three-phase operation (3 equal units of the same model required) Multiplus devices are parallel -switched, up to 6 devices can be connected in parallel and the system performance can therefore be significantly increased if necessary 2 AC exits from Multiplus 3000 and larger. For example, devices that should only run can be connected to the second output if network current is available from the Multiplus 3000 a COM port in addition to the VE.Bus port available, so that there are no longer any limits to the system integration PowerControl function enables working with limited generator performance as well as limited land or network electricity Power assist function enables “increase in performance” by generators and land connection support in the event of can be used as a UPS solution for interruption -free power supply, thanks to the integrated transfer switch with 16A or 50A for network -coupled self -consumption systems that can only be used by the network operator if the battery capacity is no longer sufficient or other programmable events have taken place Compatible with numerous Victron tax and display panels Three phase operation with identical multiplus interverters possible Solid performance expansion possibleApart from the parallel connection, three units of the same model can also be configured for a three-phase output. However, this is not enough: up to six sets with three units can be switched in parallel to achieve a huge 75 kW / 90 kva inverter and over 2,000 A charging capacity (calculated with the 5000 version)PowerControl- Working with limited generator performance, limited land or network electricity The Multiplus is a very powerful battery charger. Therefore, it takes up a lot of electricity from the generator or the land power supply (almost 10A pro 5kva multi at 230 VAC). With the remote control panel Multi Control, the maximum network or generator current can be set. The Multiplus then takes into account other connected alternating current consumers and only uses the electricity for charging, which is still “left”. This prevents the generator or land power connection from being overloaded. Power assist - “performance increase” by generators and land connection support With this function, the PowerControl principle receives a new dimension. It enables the multiplus to support too weak alternative sources. Load tips often only occur for a limited period of time. In such a case, the Multiplus ensures that too weak land current or generator output is immediately compensated for by energy from the battery. Backup system: alternating current even in the event of a network failure The Multiplus can be used in both non-linked and network-coupled PV systems as well as in other alternative energy systems. Software is available for recognizing a network failure.Simple system configuration If settings have to be changed to a single device, this can be done within a few minutes using a DIP switch setting process.Parallel switched and three-phase systems can be configured with the Ve.Bus Quick Configuret- und Ve.Bus System Configurator software. Monitoring options and controls on site Several options are available: battery teacher, Multi Control Paneel, Ve.net Blue Power Panel, Color Control Panel, smartphone or tablet (Bluetooth Smart), Laptop or Computer (USB or RS232). Monitoring and control from a distance Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and remote monitoring of the Multiplus. In addition, the system data can be saved and viewed free of charge on the VRM (Victron Remote Management) website.Configuration from a distanceIf systems are connected to the Ethernet with a color control panel, you can be accessed and settings can be changed from a distance. Scope of delivery:1x VICTRON PMP243021011 Multiplus 24/3000/70-50 device combination consisting of 24V 2400W Sinus converter + 24V 70A battery charger + 50A transfer switch1x operating instructions
€949,00
-
Fronius Fronius Symo Gen24 SC 12.0 Standard
The Fronius Symo Gen24 SC Plus convinces with a variety of integrated features that make the hearts of private system owners beat faster. Communication via WLAN and Ethernet as well as the simple and quick integration of third-party components offer high flexibility with other software and hardware products. The standard -based basic emergency power supply PV Point guarantees security of supply and the greatest possible independence.In the SC variant, Fronius has increased the possible DC input currents on the inverter. This allows high current modules to be connected without any problems. Thanks to the Multi Flow Technology, longer emergency power supply and higher self -consumption are made possible.Open interfaces can be easily integrated by third-party components. Optionally, Fronius offers a full backup emergency flow function for operation of heat pumps.
€2.237,00
-
Kostal Kostal Plenticoin card de
The QR code on the Plenticoin card is used to access activation codes to expand the Kostal inverter and wall boxes and can be used in the Kostal Solar Webshop. This is one Aweck voucher.
€139,00
-
Kostal Kostal Plenticore L G3
The Kostal Plenticore G3 is a transformerless inverter with 3 mpp trackers. Universal as a solar, hybrid or battery inverter can be used with basic services AC 4.0 (s) / 8.5 (m) / 15.0 kW (L). The services can optionally be expanded with 1 - 2x plasticoin.The battery input can be implemented with 3x plasticoin via the 3rd MPP tracker and thus enables the connection of a compatible HV memory. Prepared for additional battery charge via AC energy sources (e.g. for Kostal Doppower). Replacement electricity operation with manual switch Kostal Backup Switch G3 (08-000747) or via Enwitec Netz derivatslaltBox Kostal 3P 35KW (08-000772/773). 4 Digital outputs for load control or event report, SG-Ready.-Compatible Free monitoring via Kostal Solar Portal and Solar appWith the Kostal DC overvoltage protection module G3 (08-000746), direct integration of a ÜS possible.
€2.099,00
-
Kostal Kostal Plenticore S G3
The Kostal Plenticore G3 is a transformerless inverter with 3 mpp trackers. Universal as a solar, hybrid or battery inverter can be used with basic services AC 4.0 (s) / 8.5 (m) / 15.0 kW (L). The services can optionally be expanded with 1 - 2x plasticoin.The battery input can be implemented with 3x plasticoin via the 3rd MPP tracker and thus enables the connection of a compatible HV memory. Prepared for additional battery charge via AC energy sources (e.g. for Kostal Doppower). Replacement electricity operation with manual switch Kostal Backup Switch G3 (08-000747) or via Enwitec Netz derivatslaltBox Kostal 3P 35KW (08-000772/773). 4 Digital outputs for load control or event report, SG-Ready.-Compatible Free monitoring via Kostal Solar Portal and Solar appWith the Kostal DC overvoltage protection module G3 (08-000746), direct integration of a ÜS possible.
€1.199,00
-
Kostal Kostal Piko CI 100
The three-phase 100 kW inverter from Kostal has 16 DC inputs and 8 mpp trackers and an input current of 20 a pro Mppt. The DC installation is easy, inexpensive and possible without strand collection boxes. The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strands and is reliably used by its integrated and certified network service functions. We expect the required certificates for connecting to the medium -voltage network for April 2024.
€5.289,00
-
Kostal Kostal Piko CI 30 (HC)
The three -phase 30 - 60kW commercial inverter from KostalThe integrated Kostal Smart AC Switch replaces the external dome switch. The DC installation is simple, inexpensive and possible without strand collection boxes.The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strands and is reliably used by its integrated and certified network service functions.There is a free choice of monitoring through compatibility with many parking regulators and data loggers.
€2.592,00
-
Kostal Kostal Piko Ci 60 (HC)
The three -phase 30 - 60kW commercial inverter from KostalThe integrated Kostal Smart AC Switch replaces the external dome switch. The DC installation is simple, inexpensive and possible without strand collection boxes.The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strands and is reliably used by its integrated and certified network service functions.There is a free choice of monitoring through compatibility with many parking regulators and data loggers.
€3.630,00
-
Kostal Kostal Piko CI 50 (HC)
The three -phase 30 - 60kW commercial inverter from KostalThe integrated Kostal Smart AC Switch replaces the external dome switch. The DC installation is simple, inexpensive and possible without strand collection boxes.The PIKO CI inverter offers optimal monitoring and service by monitoring the connected PV strands and is reliably used by its integrated and certified network service functions.There is a free choice of monitoring through compatibility with many parking regulators and data loggers.
€3.444,00
-
Kostal Kostal activation code Smart Energy Meter
The activation code for the Kostal Smart Energy meter is used to activate the battery function in conjunction with the PIKO MP Plus. After you have received the activation code, please set up the inverter and battery as described in the instructions of the Kostal Smart Energy meter.
€398,00
-
Growatt Growatt 3ph inverter mid 50ktl3-X2
The Growatt MID 50KTL3-X inverter belongs to the MID series, a series of three-phase Growatt interverters with a lighter and more compact design than its predecessors. Growatt mid 50ktl3-X 50 kW The Growatt MID 50KTL3-X 50 kW inverter has a maximum output power of 50,000 W. This device is up to a maximum size of 55 kWp compatible. The maximum efficiency of the inverter is measured with a maximum efficiency of 98.5%. This efficiency applies to the average weather conditions in Europe. Functions mid 50ktl3-X The maximum performance of the MID 50KTL3-X is supported by 3 mpp trackers. The inverter is delivered without an intelligent meter and can be used for self -sufficiency or for a mesh feed. Security To ensure the safety of the system, the Growatt MID 50KTL3-X is equipped with the following integrated protective measures: DC separator DC and AC overvoltage protection, type 2 AFCI protection Protection class 66 This inverter communicates via the following interfaces with other devices in the network: RS485 USB WiFi (optional) GPRS (optional) Lan (optional)
€2.296,00
-
Growatt Growatt 3ph inverter MID 40KTL3-X
The Growatt MID 40KTL3-X inverter is part of the MID series, a series of three-phase Growatt interverters with a lighter and more compact design than its predecessors. Growatt mid 40ktl3-X 40 kW The Growatt MID 40KTL3-X 40 kW inverter has a maximum output power of 40,000 W. This device is up to a maximum size of 60 kWp compatible. The maximum efficiency of the inverter is measured with a maximum efficiency of 98.5%. This efficiency applies to the average weather conditions in Europe. Functions Mid 40ktl3-X The maximum performance of the MID 40KTL3-X is supported by 3 mpp trackers. The inverter is delivered without an intelligent meter and can be used for self -sufficiency or for a mesh feed. Security In order to ensure the safety of the system, the Growatt MID 40KTL3-X is equipped with the following integrated protective measures: DC separator DC and AC overvoltage protection, type 2 AFCI protection Protection class 66 This inverter communicates via the following interfaces with other devices in the network: RS485 USB WiFi (optional) GPRS (optional) Lan (optional)
€2.239,00
-
Growatt Growatt 3ph inverter MID 36KTL3-X
The Growatt MID 36KTL3-X inverter is part of the MID series, a series of three-phase Growatt interverters with a lighter and more compact design than its predecessors. Growatt mid 36ktl3-X 36 kW The Growatt MID 36KTL3-X 36 kW inverter has a maximum output power of 36,000 W. This device is up to a maximum size of 54 kWp compatible. The maximum efficiency of the inverter is measured with a maximum efficiency of 98.5%. This efficiency applies to the average weather conditions in Europe. Functions mid 36ktl3-X The maximum performance of the MID 36KTL3-X is supported by 3 mpp trackers. The inverter is delivered without an intelligent meter and can be used for self -sufficiency or for a mesh feed. Security To ensure the safety of the system, the Growatt Mid 36KTL3-X is equipped with the following integrated protective measures: DC separator DC and AC overvoltage protection, type 2 AFCI protection Protection class 66 This inverter communicates via the following interfaces with other devices in the network: RS485 USB WiFi (optional) GPRS (optional) Lan (optional)
€2.133,00
-
Growatt Growatt 3ph inverter MID 33KTL3-X
The Growatt MID 33KTL3-X inverter is part of the MID series, a series of three-phase Growatt interverters with a lighter and more compact design than its predecessors. Growatt mid 33ktl3-X 33 kW The Growatt MID 33KTL3-X 33 kW inverter has a maximum output power of 33,000 W. This device is up to a maximum size of 49.5 kWp compatible. The maximum efficiency of the inverter is measured with a maximum efficiency of 98.5%. This efficiency applies to the average weather conditions in Europe. Functions mid 33ktl3-X The maximum performance of the Mid 33KTL3-X is supported by 3 mpp trackers. The inverter is delivered without an intelligent meter and can be used for self -sufficiency or for a mesh feed. Security In order to ensure the safety of the system, the Growatt MID 33KTL3-X is equipped with the following integrated protective measures: DC separator DC and AC overvoltage protection, type 2 AFCI protection Protection class 66 This inverter communicates via the following interfaces with other devices in the network: RS485 USB WiFi (optional) GPRS (optional) Lan (optional)
€1.925,00
-
Growatt Growatt 3ph inverter mid 30ktl3-X
The Growatt Mid 30ktl3-X inverter belongs to the MID series, a series of three-phase Growatt interverters with a lighter and more compact design than its predecessors. Growatt mid 30ktl3-X 30 kW The Growatt Mid 30ktl3-X 30 kW inverter has a maximum output power of 30,000 W. This device is up to a maximum size of 45 kWp compatible. The maximum efficiency of the inverter is measured with a maximum efficiency of 98.5%. This efficiency applies to the average weather conditions in Europe. Functions mid 30ktl3-X The maximum performance of the mid 30ktl3-X is supported by 3 mpp trackers. The inverter is delivered without an intelligent meter and can be used for self -sufficiency or for a mesh feed. Security In order to ensure the safety of the system, the Growatt MID 30KTL3-X is equipped with the following integrated protective measures: DC separator DC and AC overvoltage protection, type 2 AFCI protection Protection class 66 This inverter communicates via the following interfaces with other devices in the network: RS485 USB WiFi (optional) GPRS (optional) Lan (optional)
€1.893,00
-
Growatt Growatt 3ph inverter mid 25ktl3-X1
The Growatt MID 25KTL3-X inverter is part of the MID series, a series of three-phase Growatt interverters with a lighter and more compact design than its predecessors. Growatt mid 25ktl3-X 25 kW The Growatt MID 25KTL3-X 25 kW inverter has a maximum output power of 25,000 W. This device is up to a maximum size of 37.5 kWp compatible. The maximum efficiency of the inverter is measured with a maximum efficiency of 98.5%. This efficiency applies to the average weather conditions in Europe. Functions Mid 25ktl3-X The maximum performance of the MID 25KTL3-X is supported by 3 mpp trackers. The inverter is delivered without an intelligent meter and can be used for self -sufficiency or for a mesh feed. Security To ensure the safety of the system, the Growatt MID 25KTL3-X is equipped with the following integrated protective measures: DC separator DC and AC overvoltage protection, type 2 AFCI protection Protection class 66 This inverter communicates via the following interfaces with other devices in the network: RS485 USB WiFi (optional) GPRS (optional) Lan (optional)
€1.715,00
-
Growatt Growatt 3ph inverter mid 25ktl3-X1
The Growatt MID 25KTL3-X inverter is part of the MID series, a series of three-phase Growatt interverters with a lighter and more compact design than its predecessors. Growatt mid 25ktl3-X 25 kW The Growatt MID 25KTL3-X 25 kW inverter has a maximum output power of 25,000 W. This device is up to a maximum size of 37.5 kWp compatible. The maximum efficiency of the inverter is measured with a maximum efficiency of 98.5%. This efficiency applies to the average weather conditions in Europe. Funktionen MID 25KTL3-X The maximum performance of the MID 25KTL3-X is supported by 3 mpp trackers. The inverter is delivered without an intelligent meter and can be used for self -sufficiency or for a mesh feed. Security To ensure the safety of the system, the Growatt MID 25KTL3-X is equipped with the following integrated protective measures: DC separator DC and AC overvoltage protection, type 2 AFCI protection Protection class 66 This inverter communicates via the following interfaces with other devices in the network: RS485 USB WiFi (optional) GPRS (optional) Lan (optional)
€1.715,00
-
Growatt Growatt 3ph inverter Max 80KTL3 LV with AFCI
The Growatt Max 80KTL3 inverter is part of the Growatt Max series, a series of three-phase commercial interverters with services from 50 kW to 125 kW. The Max version of Growatt has a maximum efficiency of 99%to ensure optimal energy generation in any commercial PV system. Growatt Max inverter All models are equipped with AFCI. This ARC-Fault Circuit Interruptter is a special backup that was developed as arc monetary monitoring. When a dangerous arc is recognized, the AFCI automatically interrupts the power supply, which significantly reduces the risk of electrical fires. Properties of the Growatt Max 80KTL3 inverter The Growatt Max 80KTL3 inverter is one of the medium-sized models of the Growatt Max inverter series. The maximum output power of the Growatt Max 80KTL3 inverter is 80,000 W. The maximum efficiency of the inverter is 98.8%. Among the weather conditions in Western Europe, the inverter achieves an efficiency of 98.5%. Optimal performance With 6 mpp trackers (MPPT), each of which takes over two strings, the system operator is also guaranteed by optimal energy generation if necessary. Interfaces available on the Growatt Max 80KTL3 LV inverter: GPRS (optional) 4G (optional) WiFi (optional) RF (optional)
€3.071,00
-
Growatt Growatt 3ph inverter Max 70KTL3 LV with AFCI
The Growatt Max 70KTL3 inverter is part of the Growatt Max series, a series of three-phase commercial inverters with services from 50 kW to 125 kW. The Max version of Growatt has a maximum efficiency of 99% for optimal energy generation in any commercial PV system. Growatt Max inverter All models are equipped with AFCI. This ARC-Fault Circuit Interruptter is a special security that was developed as arc protection. When a dangerous arc is recognized, the AFCI automatically interrupts the power supply and thus significantly reduces the risk of electrical fires. Properties of the Growatt Max 70ktl3 inverter The Growatt Max 70KTL3 inverter is one of the lighter models of the Growatt Max inverter series. The maximum output power of the Growatt Max 70KTL3 inverter is 70,000 W. The maximum efficiency of the inverter is 98.8%. Among the weather conditions in Western Europe, the inverter achieves efficiency of 98.5%. Optimal performance With 6 mpp trackers (MPPT), each processes two strings, the user of the system is also dependent on optimal energy generation when forming shadows. Interfaces available on the Growatt Max 70KTL3 LV inverter: GPRS (optional) 4G (optional) WiFi (optional) RF (optional)
€2.765,00
-
Growatt Growatt 3ph inverter Max 60KTL3 LV with AFCI
The Growatt Max 60KTL3 inverter is part of the Growatt Max series, a series of three-phase commercial inverters with services from 50 kW to 125 kW. The Max version of Growatt has a maximum efficiency of 99% for optimal energy generation in any commercial PV system. Growatt Max inverter All models are equipped with AFCI. This ARC-Fault Circuit Interruptter is a special security that was developed as arc protection. When a dangerous arc is recognized, the AFCI automatically interrupts the power supply and thus significantly reduces the risk of electrical fires. Properties of the Growatt Max 60ktl3 inverter The Growatt Max 60KTL3 inverter is the second smallest model of the Growatt Max inverter series. The maximum output power of the Growatt Max 60KTL3 inverter is 65,000 W. The product is compatible with a maximum system of 60,000 W. The maximum efficiency of the inverter is 98.8%. Among the weather conditions in Western Europe, the inverter achieves efficiency of 98.5%. Optimal performance With 6 mpp trackers (MPPT), each processes two strings, the user of the system is also dependent on optimal energy generation when forming shadows. Interfaces available on the Growatt Max 60KTL3 LV inverter: GPRS (optional) 4G (optional) WiFi (optional) RF (optional)
€2.947,00
-
Growatt Growatt 3ph inverter Max 125KTL3-X LV (AFCI)
Multiple MPPT design 2 strings pro MPP tracker, every MPP tracker can achieve the best performance, higher energy yields of the entire system. Compatible with high -performance modules String current up to 16 A, MPPT-Strom 32 A, best suited for high-performance and bifacial modules. Most important features High yields Multiple MPPT design, up to 10 mppt Compatible with high -performance modules DC/AC ratio of up to 1.5 Security and reliability AFCI protection optional Type II SPD on DC and AC page Protection class IP 66 Optimal electricity costs Compatible with AI and CU-AC cables DC 2 in 1 connection PLC communication optional
€4.877,00
-
Growatt Growatt 3ph inverter Max 120KTL3-X LV (AFCI)
The Growatt Max 125KTL3 inverter is part of the Growatt Max series, a series of three-phase commercial inverters with services from 50 kW to 125 kW. The Max version of Growatt has a maximum efficiency of 99%to ensure optimal energy generation in any commercial PV system. Growatt Max inverter All models are equipped with AFCI. This ARC-Fault Circuit Interruptter is a special backup that was developed as arc monetary monitoring. When a dangerous arc is recognized, the AFCI automatically interrupts the power supply, which significantly reduces the risk of electrical fires. Properties of the Growatt Max 125ktl3 inverter The Growatt Max 125KTL3 inverter is the most powerful model of the Growatt Max inverter series. The maximum output power of the Growatt Max 125KTL3 inverter is 110,000 W. The maximum efficiency of the inverter is 98.8%. Among the weather conditions in Western Europe, the inverter achieves an efficiency of 98.5%. Optimal performance With 6 mpp trackers (MPPT), each of which takes over two strings, the system operator is also guaranteed by optimal energy generation if necessary. Interfaces available on the Growatt Max 125KTL3 inverter: GPRS (optional) 4G (optional) WiFi (optional) RF (optional)
€4.856,00
-
Growatt Growatt 3ph inverter Max 110KTL3-X LV (AFCI)
The Growatt Max 110KTL3 inverter is part of the Growatt Max series, a series of three-phase commercial inverters with services from 50 kW to 125 kW. The Max version of Growatt has a maximum efficiency of 99%to ensure optimal energy generation in any commercial PV system. Growatt Max inverter All models are equipped with AFCI. This ARC-Fault Circuit Interruptter is a special backup that was developed as arc monetary monitoring. When a dangerous arc is recognized, the AFCI automatically interrupts the power supply, which significantly reduces the risk of electrical fires. Properties of the Growatt Max 110KTL3 inverter The Growatt Max 110KTL3 inverter is one of the more powerful models of the Growatt Max inverter series. The maximum output power of the Growatt Max 110KTL3 inverter is 110,000 W. The maximum efficiency of the inverter is 98.8%. Among the weather conditions in Western Europe, the inverter achieves an efficiency of 98.5%. Optimal performance With 6 mpp trackers (MPPT), each of which takes over two strings, the system operator is also guaranteed by optimal energy generation if necessary. Interfaces available on the Growatt Max 110KTL3 LV inverter: GPRS (optional) 4G (optional) WiFi (optional) RF (optional)
€4.491,00
-
Growatt Growatt 3ph inverter Max 100ktl3-X LV (AFCI)
The Growatt Max 100ktl3 inverter is part of the Growatt Max series, a series of three-phase commercial interverters with services from 50 kW to 125 kW. The Max version of Growatt has a maximum efficiency of 99%to ensure optimal energy generation in any commercial PV system. Growatt Max inverter All models are equipped with AFCI. This ARC-Fault Circuit Interruptter is a special backup that was developed as arc monetary monitoring. When a dangerous arc is recognized, the AFCI automatically interrupts the power supply, which significantly reduces the risk of electrical fires. Properties of the Growatt Max 100ktl3 inverter The Growatt Max 100ktl3 inverter is one of the more powerful models of the Growatt Max inverter series. The maximum output power of the Growatt Max 100ktl3 inverter is 100,000 W. The maximum efficiency of the inverter is 98.8%. Among the weather conditions in Western Europe, the inverter achieves an efficiency of 98.5%. Optimal performance With 6 mpp trackers (MPPT), each of which takes over two strings, the system operator is also guaranteed by optimal energy generation if necessary. Interfaces available on the Growatt Max 100ktl3 LV inverter: GPRS (optional) 4G (optional) WiFi (optional) RF (optional)
€3.098,00
They have 72 from 201 Seen products