Products
-
Victron Victron Smartsolar Mppt 250/100-MC4 loader Ve.CAN
The SmartSolar Mppt 250/100-MC4 from Victron Energy (MPN SCC125110310), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. This model also dominates parallel operation with other controls of the same type. Compared to the SmartSolar 150/XXX series, the 250/XXX series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-MC4 if necessary. The display then provides all important information about the controller. If necessary, the Mppt Wirbox-XL MC4 from Victron Energy The ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/100-MC4 100A 12V 24V 36V 48V Mppt ultra -quick Mppt-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Max. PV performance: 12V 1450W / 24V 2900W / 48V 5800W max. Max. PV input current: 250 volt integrated VE.Direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Mc4acker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/100-MC4 would prefer to use and configure the SmartSolar Control SCC900600010 display. The installation effort is limited to plug in the display to the SmartSolar. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The devices of classes 250/60-MC4 to 250/100-MC4 are also available as a version with MC4 connections on the solar side of the loader control instead of the screw terminals. Scope of delivery1x Victron SCC125110310 SmartSolar Mppt 250/100-MC4 12V 24V 36V 48V 85A Loader1x operating instructions
€975,00 €564,00
-
Victron Victron Smartsolar Mppt 250/100-TR loader Ve.can
The SmartSolar Mppt 250/100-TR from Victron Energy (MPN SCC125110210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. This model also dominates parallel operation with other controls of the same type. Compared to the SmartSolar 150/XXX series, the 250/XXX series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/100-TR 100a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Max. PV performance: 12V 1450W / 24V 2900W / 48V 5800W max. Max. PV input current: 250 volt integrated VE.Direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/100-TR prefer to use and configure, which can retrofit the SmartSolar Control SCC900600010 display. The installation effort is limited to plug in the display to the SmartSolar. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The devices of classes 250/60-TR up to 250/100-TR are also available as a version with MC4 connections on the solar page of the loader instead of the screw clamps. Scope of delivery1x Victron SCC125110210 SmartSolar Mppt 250/100-TR 12V 24V 36V 48V 85A Loader1x operating instructions
€950,00 €555,90
-
Victron Victron Smartsolar Mppt 250/60-TR
The SmartSolar Mppt 250/60-TR from Victron Energy, belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. The controller processes a whopping 60a solar power and can flexibly work with 12/24/36/48 V batteries and that with a maximum PV input voltage of 250V DC. The ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. In addition, this model dominates the parallel operation with other controllers of the same type. Compared to the SmartSolar 150/XX series, the 250/xx series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 250/60-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-L TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/60-TR 60a 12V 24V 48V Mppt Victron Energy Part number: SCC125060210 Max. PV performance: 12 V 860 W / 24 V 1720 W / 48 V 3440 W max. ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation options Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/60-TR prefers to use and configure, you can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second, which is used with the Loader are coupled and thus offers the possibility of communication with additional devices such as the system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The 250/60-TR is also available as a version with MC4 connections on the loader's solar side instead of the screw clamps and this can be found here. Scope of delivery1x Victron SCC125060210 SmartSolar Mppt 250/60-TR 12V 24V 48V 60A Loader1x operating instructions
€376,00
-
Victron Victron Smartsolar Mppt 250/70-TR
The SmartSolar Mppt 250/70-TR from Victron Energy (MPN SCC125070210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. The controller processes a whopping 70a solar power and can flexibly work with 12/24/36/48 V batteries and that with a maximum PV input voltage of 250V DC. The ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. In addition, this model dominates the parallel operation with other controllers of the same type. Compared to the SmartSolar 150/..... series, the 250/.... series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 250/70-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-L TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/70-TR 70a 12V 24V 48V Mppt Victron Energy Part number: SCC125070210 Max. PV performance: 12 V 1000 W / 24 V 2000 W / 48 V 4000 W max. ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation options Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/70-TR prefers to use and configure, which can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second, which is used with the Loader are coupled and thus offers the possibility of communication with additional devices such as the system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC125070210 SmartSolar Mppt 250/70-TR 12V 24V 48V 70A Loader1x operating instructions
€434,00
-
Victron Victron Smartsolar Mppt 250/85-TR loader controller Ve.can
The SmartSolar Mppt 250/85-TR from Victron Energy (MPN SCC125085210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. This model also dominates parallel operation with other controls of the same type. Compared to the SmartSolar 150/..... series, the 250/.... series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/85-TR 85A 12V 24V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Max. PV performance: 12V 1200W / 24V 2400W / 48V 4900W max. Max. PV input current: 250 volt integrated VE.Direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/85-TR prefer to use and configure, which can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The devices of classes 250/60-TR up to 250/100-TR are also available as a version with MC4 connections on the solar page of the loader instead of the screw clamps. Scope of delivery1x Victron SCC125085210 SmartSolar Mppt 250/85-TR 12V 24V 48V 85A Loader1x operating instructions
€498,00
-
Victron Victron Smartsolar Mppt 75/15 15a 12V 24V solar loader
The SmartSolar 75/15 from Victron Energy (MPN SCC075015060R) is one Mppt Solar Loader With 15a max. Charging current for charging 12V and 24V batteries. In contrast to the Bluesolar 75/15, the Smart version has integrated Bluetooth, which makes buying a Bluetooth dongels superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection.The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 75-10/15 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch.The most important technical properties at an overview 15a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 220W Nominal PV performance at 24V systems: 440W 15a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 75V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth modu Ultra -fast Maximum Power Point TrackingEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %.Intelligent load exitA deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof.Battery Life: Intelligent battery managementIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-acid battery within a few weeks or months.The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week. Number of charging outputs: 1 Battery type adjustable: Support of all common battery types Self -consumption in standby: 10mA Guarantee: 5 years Weight: 0.5 kg Manufacturer: Victron Energy Type of charge: Mppt Product type 1: MPPT loader 15a for 12V and 24V batteries with integrated Bluetooth and extensive setting options as well as an intelligent load exit. Protection class (IP): IP43 (electronic components) IP22 (connection area) Protection functions: Battery reolving fuse outdoor, output ceiling closure, overtemp. Solar module current (max.): 15a Ambient temperature: -30 ° C - +60 ° C Scope of delivery:1x Victron Energysc075015060R SmartSolar Mppt 75/15 15a 12V 24V solar Loader1x operating instructions
€61,00
-
Victron Victron Smartsolar Mppt RS 450/100 48V loader
The Mppt RS SmartSolar from Victron Energy (MPN SCC145110410) is a 48V-Solar loader With a PV input voltage of up to 450 VDC and an output of 100a. It is used in network -bound and network -independent solar applications in which maximum battery noise is required. Characteristics With ultra -fast Maximum Power Point Tracking (Mppt) Several independent Mppt-Tracking inputs Isolated PV connections for additional security Tall Mppt-Place Light, efficient and quiet Integrated display and Bluetooth communication PV isolation resistance monitoring for security at higher voltages Ve.can and ve.direct connection E/A compounds Configure and monitor with VictronConnect app or in the VRM portal The integrated BluetoothsMart connection enables quick monitoring or configuration of the settings via app. The integrated 30-day course shows the individual performance of the individual Mppt-Tracker. The app enables the display of e.g. battery voltage and current, PV voltage and current, course data and trends. The VictronConnect app is available for Android, iOS, Windows and MacOS X.If the solar controller is connected to a GX device and the Internet, the Victron Remote Management Portal (VRM) offers access to the full performance of your SmartSolar RSLoader. Additional units switched into series The SmartSolar RSLoader is equipped with Ve.can bus connections. This enables communication with additional SmartSolar RS & VE.CAN Mppt-units. The additional units are simply "chained" with a RJ45 cable. If you are connected, synchronize all individuals Loader Your charging levels. You can also send your data to a GX device (such as the Cerbogx) via the same cable for monitoring. Technical data Battery voltage: 48V Nominal charging current: 100a Max. Charge power: 5.8kw at 57.6V Ladeal gorithm: multi -stage adaptive (adaptable) Max. DC-PV voltage: 450V Mppt-Operating voltage area: 80-450V Number of trackers: 2 Max. PV operating current: 18A pro tracker Protection class: IP21 Dimensions: 440 x 313 x 126 mm Weight: 7.9 kg Scope of delivery: 1x Victron Smartsolar Mppt RS 450/100 48V Loader
€1.004,00
-
Victron Victron Smartsolar Mppt RS 450/200-MC4 48V loader
The Mppt RS SmartSolar from Victron Energy (MPN: SCC145120410) is a 48V-Solar loader With a PV input voltage of up to 450 VDC and an output of 200A. It is used in network -bound and network -independent solar applications in which maximum battery noise is required. Characteristics With ultra -fast Maximum Power Point Tracking (Mppt) Several independent Mppt-Tracking inputs Isolated PV connections for additional security Tall Mppt-Place Light, efficient and quiet Integrated display and Bluetooth communication PV isolation resistance monitoring for security at higher voltages Ve.can and ve.direct connection E/A compounds Configure and monitor with VictronConnect app or in the VRM portal The integrated BluetoothsMart connection enables quick monitoring or configuration of the settings via app. The integrated 30-day course shows the individual performance of the individual Mppt-Tracker. The app enables the display of e.g. battery voltage and current, PV voltage and current, course data and trends. The VictronConnect app is available for Android, iOS, Windows and MacOS X.If the solar controller is connected to a GX device and the Internet, the Victron Remote Management Portal (VRM) offers access to the full performance of your SmartSolar RSLoader. Additional units switched into series The SmartSolar RSLoader is equipped with Ve.can bus connections. This enables communication with additional SmartSolar RS & VE.CAN Mppt-units. The additional units are simply "chained" with a RJ45 cable. If you are connected, synchronize all individuals Loader Your charging levels. You can also send your data to a GX device (such as the Cerbogx) via the same cable for monitoring. Technical data Battery voltage: 48V Nennladestrom: 200a Max. Charge power: 11.5 kW at 57.6V Ladeal gorithm: multi -stage adaptive (adaptable) Max. DC-PV voltage: 450V Mppt-Operating voltage area: 80-450V Number of trackers: 4 Max. PV operating current: 18A pro tracker Protection class: IP21 Dimensions: 487 x 434 x 146 mm Weight: 13.7 kg Scope of delivery: 1x Victron Smartsolar Mppt RS 450/200-RT 48V Loader
€1.758,00
-
Victron Victron VE.Bus BMS V2 Battery management system
The Victron Energy Ve.Bus BMS V2 (MPN: BMS300200200) is the next generation of VE.Bus BMS for Victron Lithium Smart Batteries (LFP-Smart) 12.8V and 25.6V. Each single cell of a Lifepo4 battery must be protected against overvoltage, undervoltage and over temperature. The Ve.Bus BMS V2 takes over exactly this task. The product is suitable for protecting 12V, 24V and 48V batterys and works in a operating voltage range of 9 - 70 VDC. VE-BUS BMS V2 in interaction with Victtrons Lifepo4 Batteries Victron LIFEPO4 batteries have a built-in cell compensation, temperature and voltage control (short brief designation: BTV) You will be connected to the VE.BUS BMS V2 via two M8 round connector cable sets. The BTVs of several batteries can be chained together. They can be switched in series, parallel and in a row and in parallel, which means that a battery range of 12V, 24V or 48V can be interpreted. Up to 20 batteries in one system are possible, which leads to an energy storage of max. 84KWH in a 12V system and 102kWh in a 24V and 48V system. For more details, please refer to the technical documents for our Lifepo4 battery. Core tasks of the Victron Ve.Bus BMS V2 Specially developed for use with Victron Lithium Battery Smart 12.8 V & 25.6 V batteries. Communicates directly with the lithium battery via the M8 circuit connecting cable of the battery Switch off or separate from VE.Bus inverter or inverters/chargers via Ve.bus and other loads via the terminal "load", in the event of a cell subtle voltage Switch off or separate from Ve.Bus inverter or inverters/chargers via Ve.bus, Ve.Direct and Ve.can solar charyer via a GX device and other chargers via the terminal "separate", in the case of a cell overvoltage, lower temperature or over temperature. Difference to the Ve.Bus BMS The VE.Bus BMS V2 was specially developed for use in systems with GX devices and is therefore perfect for eating or backup applications with a battery capacity of up to 84KWH (12V) or 102KWH (24V/48V).The BMS V2 also has a remote contact for remote control (on/off). Communication with Ve.Bus products Multiplus, Quattro or Phoenix inverters are connected to the "Multiplus/Quattro" connection with a standard RJ45 UTP cable.The BMS deactivates the inversion in the event of an undervoltage of the cell and loading in the event of overvoltage or over temperature of the cell Communication with remote control devices A GX device (e.g. Cerbo GX), a digital multi control (DMC) panel or a Ve.Bus Smart Dongle (including any combination) can be connected to the BMS via the "Remote control panel". This accessories can be used in combination with the BMS to controll the switching condition of the VE.Bus inverter or the inverter / charger (one / only / only charger) Clamps for additional inputs and outputs The BMS has a special power output (GX-Power) for a GX device and an additional power input (AUX-in) for an external DC source, e.g. B. a network adapter. In the event of a system shutdown, the GX device is further supplied with electricity to prevent a further unloading of the battery via the auxiliary voltage receipt or separated from the network Technical data Input voltage area: 9-70VDC Electricity intake - regular operation: 10mA (load cutting current not enclosed) GX-Pow output: 1A Aux-in input: 1a Ve.Bus interface: 2x RJ45 sockets for connection to all Ve.Bus products Operating temperature range: -20 ° C - +50 ° C Moisture: Max. 95% (not condensing) Protection class: IP20 Weight: 120gr Dimensions: 105.5 x 94.5 x 23.8 mm Scope of delivery: 1x VICTRON Energy BMS300200200 VE.Bus BMS V2 Battery Management System1x operating instructions
€167,00
-
Victron VICTRON VM-3P75CT Energy meter 3-phase electricity meter 75a/phase
The Multiplus-II 48/5000/70-50 is a high-end device combination of Victron Energy (MPN: PMP482505010) combines the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 100 A and the potential area of application extends to eating applications. The inverter module provides a whopping 5000 W or 4000 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, with which it can be switched back and forth between the AC connections. Important performance features of the Multiplus-II 48/5000/70-50 PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* Technical features 5000 W power with non -linear load 4000 W continuous load and 9000 W Top output For 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 48/5000/70-50. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failure The device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Many options for system expansion The settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). There are several surveillance and control options available: Color Control GX, Venus GX, Octo, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle),) Battery guard, digital multi operating panel. Configuration and monitoring remotely Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed. Scope of delivery: 1x Victron PMP482505010 Multiplus-II 48/5000/70-50a1x operating instructions
€222,00
-
Victron Victron Wallbox EV charging station-NS up to 22kW 1 and 3-phase electric car
The EV Charging Station NS 22 KW (MPN: EVC200300200) from Victron Energy is a powerful electric vehicle charging station that you can operate both 3-pahsig and 1-phase. It delivers impressive 22 kW AC output in 3-phase operation, while in 1-phase mode there is still solid 7.3 kW available. Although technically identical to the EV Charging station, the new version is characterized by a modern design, which is available in 3 different colors. The setup, configuration and monitoring takes place conveniently from VictronConnect via Bluetooth and /or the integrated web interface, which can be reached via a WiFi access point or WiFi LAN. Furthermore, a GX device can be integrated and thereby enable you to control the remote control. It is particularly noteworthy that excess solar energy is used directly to charge your vehicle. Manual and time -controlled modes offer additional flexibility to meet the requirements of the electric vehicle, the energy supply system and your general electromobility. Via the EV Charging Station NS Powerful e-vehicle charging station WLAN communication 1- or 3-phase operation Easy operation and control Via Bluetooth and VictronConnect app Leuchtring to the status display 3 operating modes available Optionally available colored fronts: Black White Operation. Control and advertisement A single look in the VictronConnect app or via Bluetooth, gives you full control and overview of all operating parameters and statistics. Furthermore, a Cerbo GX communication center can optionally be consulted for remote monitoring. The charging station is equipped with a fully programmable RGB glow ring around the loading connection, which enables it to be attributed to the status of the device at a glance. With the help of the integrated web interface, this light ring can be individually configured in order to display different lighting effects according to the current state (separated, loaded, in operation, etc.). Operating modes Manual mode for configuring the output current: In manual mode it is possible to configure the output current flexibly in the range from 6 to 32 A. The charging capacity can be controlled in different ways. Either via the web interface, from a GX device and VRM remote monitoring or using VictronConnect. On this way, it is easy to initiate or end the charging process as soon as a vehicle is connected to the charging station.Optional GX device for VRM remote monitoring: Victron GX Touch 50 display panel for Cerbo GX Victron GX Touch 70 display panel for Cerbo GX Automatic mode to ensure the maximum efficiency of the PV system: The charging station automatically recognizes when excess energy is available and only uses them to charge the vehicle. Instead of energy loss that would arise, if excess energy would be lost, it is stored in the battery of the vehicle instead.Time -controlled mode for charging the vehicle at a certain point in time: Thanks to a fully programmable timer, the vehicle can be charged at different times. For example, during the night when the network costs are lower. Technical data Input voltage area: 170-265V AC Nominal charging current: 32a / phase Nominal output: 22 kW Power distribution area: 6-32 a Self -consumption: 15 mA at 230 V Operating temperature range: -25 ° C - +50 ° C Storage temperature range: -40 ° C - +80 ° C Protection class: IP44 Weight: 3 kg Dimensions: 372 x 292 x 122 mm Data communication: Modbus TCP via WLAN, Bluetooth Scope of delivery: 1x Victron Energy EV Charging Station NS 22 KW
€607,00
-
Wallbox Wallbox Commander 2 (22kW / 5 meters / type 2/4g / black)
Commander 2 was designed for uncomplicated access by several users. The charger is equipped with an easy-to-use 7-inch touchscreen, and each user can individually adapt their experience. Commander 2 offers various options for access control: via a password, RFID cards or the MyWallbox app. The device also offers a variety of functions with which you can control your charger via the MyWallbox platform. Commander 2 has several connectivity options and is available with many charging cables and charging capacity. You can therefore charge electric vehicles with up to 22 kW. The rain protection for the Wallbox Commander 2 EV charger must be installed if the charger is installed on a assembly mast.
€1.210,00
-
Wallbox Wallbox Commander 2 (22kW / 7 meters / type 2/4g / black)
Commander 2 was designed for uncomplicated access by several users. The charger is equipped with an easy-to-use 7-inch touchscreen, and each user can individually adapt their experience. Commander 2 offers various options for access control: via a password, RFID cards or the MyWallbox app. The device also offers a variety of functions with which you can control your charger via the MyWallbox platform. Commander 2 has several connectivity options and is available with many charging cables and charging capacity. You can therefore charge electric vehicles with up to 22 kW. The rain protection for the Wallbox Commander 2 EV charger must be installed if the charger is installed on a assembly mast.
€1.283,00
-
Wallbox Wallbox Commander 2 (22kW / 7 meters / type 2/4g / black)
Commander 2 was designed for uncomplicated access by several users. The charger is equipped with an easy-to-use 7-inch touchscreen, and each user can individually adapt their experience. Commander 2 offers various options for access control: via a password, RFID cards or the MyWallbox app. The device also offers a variety of functions with which you can control your charger via the MyWallbox platform. Commander 2 has several connectivity options and is available with many charging cables and charging capacity. You can therefore charge electric vehicles with up to 22 kW. The rain protection for the Wallbox Commander 2 EV charger must be installed if the charger is installed on a assembly mast.
€1.283,00
-
Wallbox Wallbox Copper SB (22kW / Shutter Socket / Type 2 / Black)
Copper SB is Wallbox flexible charger. Thanks to its integrated socket, it is compatible with type 1 and type 2 charging devices and can therefore charge any electric vehicle available on the market. Copper SB links smart technology with a breathtaking design. Choose who can operate your charger and protect access with a password, RFID cards or the MyWallbox app. Benefit from a series of functions to control your charger from the MyWallbox platform. Copper SB has several connectivity options and is available with a number of charging cables and charging capacity. You can therefore charge electric vehicles with up to 22 kW.
€895,00
-
Wallbox Wallbox Eiffel Plus Pedestal + 2 Copper SB 22KW (complete set)
Set made of two Wallbox Copper SB chargers with assembly stick, including electrical protective devicesEiffel Plus is a solution for Copper SB, which enables electrical plug & play installation. Electric protective devices (MCB + RCD) are included pro Charger, Ethernet switch, MID counter and the main electrical connection. Thanks to the perfect design, particularly suitable for half -public and private application, such as companies, shopping centers, hotels, apartments, etc. Wallbox also offers an optional 3G/4G router for the production of an internet connection.
€3.694,00
-
Wallbox Wallbox Kit Pulsar Max PLP2 (22kW / 5 meters / type 2 / black) & power measuring device (3ph) & Dock
This kit contains: 1x Pulsar Max 1x Wallbox 3-phase power meter 1x cable holder Pulsar Max keeps the advanced performance of the Pulsar family and at the same time introduces a future-proof design for more robustness and usability. Protection class IK10 with scratch -resistant, matt texture. Ultra -fast progressive CPU: Higher processing speeds for better connectivity and future -proof willingness for security updates - specially developed especially for charging. Return plate for easy installation: Reduce the installation time by 10 - 20 % with an easy -to -assemble design. Compatible with solar load Use Eco-Smart-and all Wallbox energy management solutions-to maximize cost and energy savings. 3-phase current meter: The combination of an energy meter with your intelligent charger is activated the power boost function.
€1.116,00
-
Wallbox Wallbox Kit Pulsar Max PLP2 (22kW / 5 meters / type 2 / white) & Power Boost meter (3ph) & Dock
This kit contains: 1x Pulsar Max 1x Wallbox three-phase power meter 1x cable holder Pulsar Max keeps the advanced performance of the Pulsar family and at the same time introduces a future-proof design for more robustness and usability. Protection class IK10 with scratch -resistant, matt texture. Ultra -fast, advanced CPU: Higher processing speeds for better connectivity And future -proof willingness for security updates - specially developed for the shop. Back plate for easy installation Reduce the installation time by 10 - 20 % with an easy -to -assemble design. Compatible with solar load Use Eco-Smart-and all Wallboxing energy management solutions-to maximize costs and energy savings. Three-phase power meter Get a current meter and keep control of your electricity bills If you combine an energy meter with your intelligent charger, the Power Boost function is activated.
€1.116,00
-
Wallbox Wallbox Kit Pulsar Max PLP2 (7.4kW / 5 meters / type 2 / white) & terminal (1ph) & dock
This kit contains: 1x Pulsar Max 1x Wallbox 1-phase power meter 1x cable holder Pulsar Max keeps the advanced performance of the Pulsar family and at the same time introduces a future-proof design for more robustness and usability. Protection class IK10 with scratch -resistant, matt texture. Ultra -fast progressive CPU: Higher processing speeds for better connectivity and future -proof willingness for security updates - specially developed especially for charging. Return plate for easy installation: Reduce the installation time by 10 - 20 % with an easy -to -assemble design. Compatible with solar load Use Eco-Smart-and all Wallbox energy management solutions-to maximize cost and energy savings. 1-phase current meter: The combination of an energy meter with your intelligent charger is activated.
€996,00
-
Wallbox Wallbox Pulsar Plus (11kw / 5 meters / type 2 / black)
Pulsar Plus is the smallest powerful e-car charging station from Wallbox. It finds space everywhere and changes its color depending on the charging status. So you know at a glance whether your car is still loading or is already ready for use. It is available with many charging cables and current strengths and can therefore load all electric cars with up to 22 kW. The MyWallbox app now makes it easier. It enables you to manage your charging station via WLAN and Bluetooth from any smart device. You can use it to control loading processes, create schedules, receive notifications and much more. With Pulsar Plus you check theCharging process and go with a full battery every morning.
€724,00
-
Wallbox Wallbox Pulsar Plus (11kw / 7 meters / type 2 / black)
Pulsar Plus is the smallest powerful e-car charging station from Wallbox. It finds space everywhere and changes its color depending on the charging status. So you know at a glance whether your car is still loading or is already ready for use. It is available with many charging cables and current strengths and can therefore load all electric cars with up to 22 kW. The MyWallbox app now makes it easier. It enables you to manage your charging station via WLAN and Bluetooth from any smart device. You can use it to control loading processes, create schedules, receive notifications and much more. With Pulsar Plus you check theCharging process and go with a full battery every morning.
€868,00
-
Wallbox Wallbox Pulsar Plus (22kW / 5 meters / type 2 / black)
Pulsar Plus is the smallest powerful e-car charging station from Wallbox. It finds space everywhere and changes its color depending on the charging status. So you know at a glance whether your car is still loading or is already ready for use. It is available with many charging cables and current strengths and can therefore load all electric cars with up to 22 kW. The MyWallbox app now makes it easier. It enables you to manage your charging station via WLAN and Bluetooth from any smart device. You can use it to control loading processes, create schedules, receive notifications and much more. With Pulsar Plus you check theCharging process and go with a full battery every morning.
€735,00
-
Wallbox Wallbox Pulsar Plus (22kW / 7 meters / type 2 / black)
Pulsar Plus is the smallest powerful e-car charging station from Wallbox. It finds space everywhere and changes its color depending on the charging status. So you know at a glance whether your car is still loading or is already ready for use. It is available with many charging cables and current strengths and can therefore load all electric cars with up to 22 kW. The MyWallbox app now makes it easier. It enables you to manage your charging station via WLAN and Bluetooth from any smart device. You can use it to control loading processes, create schedules, receive notifications and much more. With Pulsar Plus you check theCharging process and go with a full battery every morning.
€851,00
-
Wallbox Wallbox Pulsar Plus Socket (22KW / T2 / Black)
Pulsar Plus Socket is a practical, intelligent charging system for electric vehicles and plug-in hybrids, which connects to the MyWallbox app via WLAN or Bluetooth. Pulsar Plus Socket has an integrated socket with closure protection as well as a higher protection class and a new, easy -to -install design. Functions: Power sharingThanks to the cable locking function, you can switch from the socket to a firmly connected device at any time. Backplate design for easier and faster installation.Protection class IP55 and IK10 for even better protection against bumps, water or dust.New external safety screws for the theft fuse. Optional functions: Power Boost, DynamicPower sharingEco-smartExternal mid
€802,00
They have 456 from 465 Seen products