2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This modular acti9 ICV40N error voltage circuit breaker is a plant control switch equipped with earth closure protection. It is a 3P+N error voltage control switch with 3 protected poles and a connected neutral conductor, a nominal current of 40 A and passage current characteristics C. The earth closure protection class is type A-SI with the earth's sensitivity of 30 mA. The earth closure protection is triggered immediately and has no time delay. The ICN unloading capacity is 6000 A at 400 VAC according to EN/IEC 61009-2-1.
This error voltage circuit breaker protects circuit circuits from short circuits, overload currents, dangerous electrical blows and fire. The two one-time visitrip indicators shorten the search for the triggered line protection switch by clearly displaying it. The green visitors guarantee the physical opening of the contacts to enable downstream maintenance. This product corresponds to standard EN/IEC 61009-2-1 for fault voltage control switch. This Schneider Electric error voltage control switch has an electric lifespan of up to 10,000 cycles and a mechanical lifespan of up to 20,000 cycles.
The assigned UE operating voltage is 230 VAC. The assigned UI insulation voltage is 440 VAC. The assigned UIMP-incorrect resistance is 4 kv. The network frequency is 50/60 Hz. For modular installation on DIN rail. The width of this fault voltage circuit breaker is 5 modules of 18 mm each. This product is designed in the color white (RAL 9003). The dimensions are 90 mm (W) x 93 mm (h) x 73 mm (t). The weight is 500 g. According to the IEC 60529 standard, the protection class IP20 is. It increases to IP40 in assembly in a modular housing with insulating class II. The operating temperature is between -25 ° C and 60 ° C. The storage temperature is between -40 ° C and 85 ° C.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
The Acti 9 IID from Schneider Electric is a 4-pin modular residual current circuit breaker (RCCB) with a nominal current of 40A and an operating voltage of 400V. It is characterized by a short-circuit and overload tracery of 1500a (IM/IδM), an electrical lifespan of 15,000 cycles and a mechanical lifespan of 20,000 cycles. The IP20 protective degree increases in a housing to IP40. The assembly is simplified by attaching to a DIN rail, and it can be installed on the entrance and on the output side of the system. It corresponds to the standards IEC/EN 61008-2-1 and IEC/EN 62423, with the fault current protection class B-SI, which makes it particularly suitable for EV installations.
This environmentally friendly product is completely recyclable and reusable. It improves the continuity of the service thanks to the Visitrip indicator. The selection of the right component is simplified by clear part numbers, and the installation is facilitated by ergonomic and secure IP20B terminal covers and robust connections.
New for residual current circuit breakers in the final distribution, especially for EV installations
Improved service contact with visitrip
Simple selection through sensible part numbers
Easy installation with quick, ergonomic & secure IP20B terminal covers & robust connections
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
Evink Home is a simple and easy-to-install charging station, which ensures the correct load of your e-vehicle in order to minimize top loads and to avoid power crossing and associated penalties.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
Evink Home is a simple and easy-to-install charging station, which ensures the correct load of your e-vehicle in order to minimize top loads and to avoid power crossing and associated penalties.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
Evink Home is a simple and easy-to-install charging station, which ensures the correct load of your e-vehicle in order to minimize top loads and to avoid power crossing and associated penalties.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
Evink Home is a simple and easy-to-install charging station, which ensures the correct load of your e-vehicle in order to minimize top loads and to avoid power crossing and associated penalties.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
Evink Home is a simple and easy-to-install charging station, which ensures the correct load of your e-vehicle in order to minimize top loads and to avoid power crossing and associated penalties.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This evil Pro AC product is a wall-mounted charging station for all electrical vehicles. The charging station corresponds to the IEC 61851-1 standard. It can be attached to a stand on the floor or integrated into a housing set. The stand and housing set must be ordered separately. Installation possible inside and outside. The IP protection class is IP55. The IK protection type is IK10.
The operating temperature is between -30 ° C and 50 ° C. The storage temperature is between -40 ° C and 80 ° C. The output type is a connected 5 meter cable with a T2 connector with flap (T2S) at the end, installed at the top of the charging station. All contacts of the T2 connector are silvered to avoid overheating. The nominal output power is 11 kW. Provision three -phase (3P+N). The nominal charging current is 16 A at 380 V to 415 VAC at a frequency of 50 Hz to 60 Hz.
Using with TT, TN-S or TN-C-S-sterming system possible. Also IT compatible with an additional separator in the power supply. The charging station is easy to install and put into operation. Recommended for use at home, in vehicle fleets, on the street or at the workplace. The dimensions are (b) 317 mm x (h) 529 mm x (t) 183 mm. The product weighs 10 kg. The color is white (RAL 9003). Included are a built-in creep electricity protection with 6 MA creeping stream detection (RDC-DD) and a 30 MA fault electricity protection device (RCD) of type A-SI. For safety reasons, an MNX subsequent trigger is also integrated into the charging station. In addition, the EV ready requirements must be met. The charging station can be fed by a cable that runs from behind, top or bottom. To charge electric vehicles, access control is carried out by user authentication via an RFID or NFC ID.
The charging station can also be used freely. The start of the charging process can be delayed. During the loading time, the performance can be limited to ensure service contact and optimize the loading time of all charging stations based on the same power supply. Two Ethernet RJ45 inputs for LAN connection. The parameters are defined with the Esetup app via Bluetooth or Ecostruxure EV Charging Expert. The charging station can be managed in standalone or clustered architecture. The communication protocol OCCP 1.6 is used to connect to the surveillance device. Available services are charging data, diagnostics and charging management. The charging station has CE and EV Ready certification.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This evil Pro AC product is a wall-mounted charging station for all electrical vehicles in accordance with standard IEC 61851-1. Installation on the floor is also possible, either attached to a stand or integrated into a housing set. The stand and housing set must be ordered separately. Installation possible inside and outside. The IP protection class is IP55. The IK protection type is IK10. The operating temperature is between -30 ° C and 45 ° C. The storage temperature is between -40 ° C and 80 ° C.
The output type is a T2 socket with flap (T2S), which is attached to the front of the station. All contacts of the T2S socket are silvered to avoid overheating. The nominal output power is 7.4 kW. Provision in phase (1p+n). The nominal charging current is 32 A at 220 V to 240 VAC at a frequency of 50 Hz to 60 Hz. IT compatible with an additional separator in the power supply. The charging station is easy to install and put into operation. Recommended for apartment buildings, vehicle fleets, street or workplace. The dimensions are (b) 317 mm x (h) 529 mm x (t) 153 mm. The product weight is 7.2 kg. The color is dark gray (RAL 7016). Included are a built-in protection against error-equal power current with 6 MA error equal strom detection (RDC-DD) and a 30 MA fault electricity protection device (RCD) of type A-SI. For safety reasons, an MNX undervoltage trigger is also integrated into the charging station. In addition, the EV ready requirements must be met.
In addition, a mid-energy counter with accuracy class 1 is integrated into the charging station. The charging station can be fed by a cable that runs from behind, top or bottom. To charge electric vehicles, access control is carried out by user authentication using RFID or NFC ID. The charging station can also be used freely. The charging process can be started in a time delay. During the loading time, the performance can be limited to ensure service contact and optimize the loading time of all charging stations based on the same feed. Two Ethernet RJ45 inputs for LAN connection. The parameters are defined with the Esetup app via Bluetooth or Ecostruxure EV Charging Expert.
The charging station can be managed in standalone or clustered architecture. The OCPP 1.6 Communication protocol is used to connect to the surveillance device. The available services are CDR, diagnostic options and charging management. The charging station has CE and EV Ready certification.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This evil Pro AC product (EVB3S22NC0M) is a wall-mounted charging station for all electrical vehicles. The charging station corresponds to the IEC 61851-1 standard. It can be attached to a stand on the floor or integrated into a housing set. The stand and housing set must be ordered separately. Installation possible inside and outside. The IP protection class is IP55. The IK protection type is IK10. The operating temperature is between -30 ° C and 50 ° C. The storage temperature is between -40 ° C and 80 ° C. The output type is a connected 5 meter cable with a T2 connector with flap (T2S) at the end, installed at the top of the charging station.
All contacts of the T2 connector are silvered to avoid overheating. The nominal output power is 22 kW. Provision three -phase (3P+N). The nominal charging current is 32 A at 380 V to 415 VAC at a frequency of 50 Hz to 60 Hz. Also IT compatible with an additional separator in the power supply. The charging station is easy to install and put into operation. Recommended for use at home, in vehicle fleets, on the street or at the workplace. The dimensions are (b) 317 mm x (h) 529 mm x (t) 183 mm. The product weighs 10 kg. The color is white (RAL 9003). Included are a built-in creep electricity protection with 6 MA creeping stream detection (RDC-DD) and a 30 mA fault voltage protection device (RCD) of type A-SI.
For safety reasons, an MNX subsequent trigger is also integrated into the charging station. In addition, the EV ready requirements must be met. The charging station can be fed by a cable that runs from behind, top or bottom. To charge electric vehicles, access control is carried out by user authentication via an RFID or NFC ID. The charging station can also be used freely. The start of the charging process can be delayed. During the loading time, the performance can be limited to ensure service contact and optimize the loading time of all charging stations based on the same power supply. Two Ethernet RJ45 inputs for LAN connection. The parameters are defined with the Esetup app via Bluetooth or Ecostruxure EV Charging Expert.
The charging station can be managed in standalone or clustered architecture. The communication protocol OCCP 1.6 is used to connect to the surveillance device. Available services are charging data, diagnostics and charging management. The charging station has CE and EV Ready certification.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This evil Pro AC product is a wall-mounted charging station for all electric vehicles that corresponds to the IEC61851-1 standard. It can also be ground, either attached to a base or integrated into a kit housing. The base and kit housing must be ordered separately. It can be installed both indoors and outdoors. The IP protective degree is IP55. The IK protective degree is IK10. The operating temperature is between -30 ° C and 50 ° C. The storage temperature is between -40 ° C and 80 ° C. The output type is a T2 socket with closure (T2S), which is attached to the front of the station.
All contacts of the T2S socket are silver-plated to avoid overheating. The nominal output power is 22 kW. It is delivered three -phase (3P+N). The nominal charging current is 32 A at 380 V to 415 VAC with a frequency of 50 Hz to 60 Hz. It can be used with a TT, TN-S or TN-C-S earth-inheritance system. It is also IT compatible with an additional separator on the power supply. The charging station is easy to install and put into operation. It is recommended at home and in fleet, on the street or at work. The dimensions are (b) 317 mm x (h) 529 mm x (t) 153 mm. The product weight is 7.2 kg. Its color is white (RAL9003). It has a built-in protection against error equivalent current with a 6-MA error-like current detection detection device (RDC-DD). In addition, it is necessary to meet the EV-Ready requirements. A mid-energy counter with an accuracy class of class 1 is also integrated into the charging station. The charging station can be supplied via a cable that comes from behind, at the top or below.
In order to charge an electric vehicle, access control is carried out via user authentication via RFID or NFC ID. The charging station can also be used for free access. The charging start can be delayed in a time delay. During the loading time, the performance can be limited to ensure operating continuity and optimize the loading time of all charging stations based on the same feed. It has 2 Ethernet RJ45 ports for the LAN connection. The parameters are set up via the Esetup app via Bluetooth or Ecostruxure EV Charging Expert. The charging station can be managed in an independent or in a cluster architecture. The communication protocol OCCP 1.6 is used to connect to the surveillance device. The available services are the charging line recordings, the diagnostic functions and load management. The charging station is CE and EV ready-certified. The firmware from Evink Pro AC is waited up to 2 years after the end of the marketing.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This evil Pro AC product is a wall-mounted charging station for all electric vehicles that corresponds to the IEC61851-1 standard. It can also be ground, either attached to a base or integrated into a kit housing. The base and kit housing must be ordered separately. It can be installed both indoors and outdoors. The IP protective degree is IP55. The IK protective degree is IK10. The operating temperature is between -30 ° C and 50 ° C. The storage temperature is between -40 ° C and 80 ° C.
The output type is a T2 socket with closure (T2S), which is attached to the front of the station. All contacts of the T2S socket are silver-plated to avoid overheating. The nominal output power is 22 kW. It is delivered three -phase (3P+N). The nominal charging current is 32 A at 380 V to 415 VAC with a frequency of 50 Hz to 60 Hz. It can be used with a TT, TN-S or TN-C-S earth-inheritance system. It is also IT compatible with an additional separator on the power supply. The charging station is easy to install and put into operation. It is recommended at home and for fleet, on the street or at work. The dimensions are (b) 317 mm x (h) 529 mm x (t) 153 mm. The product weight is 7.2 kg. Its color is white (RAL9003). It has built-in protection against error equal current with a 6-MA error-like current detection device (RDC-DD) and a 30-mA error current control switch (RCD) of the AT A-SI. For safety reasons, an MNX undervoltage trigger is also integrated into the charging station. In addition, it is necessary to meet the EV-Ready requirements.
The charging station can be supplied via a cable that comes from behind, at the top or below. In order to charge an electric vehicle, access control is carried out by user authentication via RFID or NFC ID. The charging station can also be used for free access. The charging start can be delayed in a time delay. During the loading time, the performance can be limited to ensure operating continuity and optimize the loading time of all charging stations based on the same feed. It has 2 Ethernet RJ45 ports for the LAN connection. The parameters are set up via the Esetup app via Bluetooth or Ecostruxure EV Charging Expert. The charging station can be managed in a standalone or cluster architecture. The communication protocol OCCP 1.6 is used to connect to the surveillance device. The available services are the charging line recordings, the diagnostic functions and load management. The charging station is CE and EV ready-certified. The firmware from Evink Pro AC is waited up to 2 years after the end of the marketing.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This evil Pro AC product is a wall-mounted charging station for all electric vehicles that corresponds to the IEC61851-1 standard. It can also be ground, either attached to a base or integrated into a kit housing. The base and kit housing must be ordered separately. It can be installed both indoors and outdoors. The IP protective degree is IP55. The IK protective degree is IK10. The operating temperature is between -30 ° C and 50 ° C.
The storage temperature is between -40 ° C and 80 ° C. The output type is a T2 socket with closure (T2S), which is attached to the front of the station. All contacts of the T2S socket are silver-plated to avoid overheating. The nominal output power is 22 kW. It is delivered three -phase (3P+N). The nominal charging current is 32 A at 380 V to 415 VAC with a frequency of 50 Hz to 60 Hz. It can be used with a TT, TN-S or TN-C-S earth-inheritance system. It is also IT compatible with an additional separator on the power supply. The charging station is easy to install and put into operation. It is recommended at home and in fleet, on the street or at work. The dimensions are (b) 317 mm x (h) 529 mm x (t) 153 mm. The product weight is 7.2 kg. Its color is white (RAL9003). It has built-in protection against error equal power with an residual current circuit breaker (RCD) of the type B-EP (electric vehicle). For safety reasons, an MNX undervoltage trigger is also integrated in the charging station. In addition, it is necessary to meet the EV ready requirements. The charging station can be supplied via a cable that comes from behind, at the top or below.
In order to charge an electric vehicle, access control is carried out via user authentication via RFID or NFC ID. The charging station can also be used for free access. The charging start can be delayed in a time delay. During the loading time, the performance can be limited to ensure operating continuity and optimize the loading time of all charging stations based on the same feed. It has 2 Ethernet RJ45 ports for the LAN connection. The parameters are set up via the Esetup app via Bluetooth or Ecostruxure EV Charging Expert. The charging station can be managed in an independent or in a cluster architecture. The communication protocol OCCP 1.6 is used to connect to the surveillance device. The available services are the charging line recordings, the diagnostic functions and load management. The charging station is CE and EV ready-certified. The firmware from Evink Pro AC is waited up to 2 years after the end of the marketing.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This evil Pro AC product is a wall-mounted charging station for all electric vehicles that corresponds to the IEC61851-1 standard. It can also be ground, either attached to a base or integrated into a kit housing. The base and kit housing must be ordered separately. It can be installed both indoors and outdoors. The IP protective degree is IP55. The IK protective degree is IK10. The operating temperature is between -30 ° C and 50 ° C. The storage temperature is between -40 ° C and 80 ° C.
The output type is a T2 socket with closure (T2S), which is attached to the front of the station. All contacts of the T2S socket are silver-plated to avoid overheating. The nominal output power is 22 kW. It is delivered three -phase (3P+N). The nominal charging current is 32 A at 380 V to 415 VAC with a frequency of 50 Hz to 60 Hz. It can be used with a TT, TN-S or TN-C-S earth-inheritance system. It is also IT compatible with an additional separator on the power supply.
The charging station is easy to install and put into operation. It is recommended at home and in fleet, on the street or at work. The dimensions are (b) 317 mm x (h) 529 mm x (t) 153 mm. The product weight is 7.2 kg. Its color is white (RAL9003). It has a built-in protection against error equivalent current with a 6-MA error-like current detection detection device (RDC-DD). For safety reasons, an MNX under-voltage resolution is also integrated in the charging station. In addition, it is necessary to meet the EV ready requirements. The charging station can be supplied via a cable that comes from behind, at the top or below. In order to charge an electric vehicle, access control is carried out via user authentication via RFID or NFC ID. The charging station can also be used for free access. The charging start can be delayed in a time delay. During the loading time, the performance can be limited to ensure operating continuity and optimize the loading time of all charging stations based on the same feed. It has 2 Ethernet RJ45 ports for the LAN connection. The parameters are set up via the Esetup app via Bluetooth or Ecostruxure EV Charging Expert. The charging station can be managed in an independent or in a cluster architecture. The communication protocol OCCP 1.6 is used to connect to the surveillance device. The available services are the charging line recordings, the diagnostic functions and load management. The charging station is CE and EV ready-certified. The firmware from Evink Pro AC is waited up to 2 years after the end of the marketing.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This evil Pro AC product is a wall-mounted charging station for all electrical vehicles in accordance with standard IEC 61851-1. Installation on the floor is also possible, either attached to a stand or integrated into a housing set. The stand and housing set must be ordered separately. Installation possible inside and outside. The IP protection class is IP55. The IK protection type is IK10.
The operating temperature is between -30 ° C and 45 ° C. The storage temperature is between -40 ° C and 80 ° C. The output type is a T2 socket with flap (T2S), which is attached to the front of the station. All contacts of the T2S socket are silvered to avoid overheating. The nominal output power is 7.4 kW. Provision in phase (1p+n). The nominal charging current is 32 A at 220 V to 240 VAC at a frequency of 50 Hz to 60 Hz. IT compatible with an additional separator in the power supply. The charging station is easy to install and put into operation. Recommended for apartment buildings, vehicle fleets, street or workplace. The dimensions are (b) 317 mm x (h) 529 mm x (t) 153 mm. The product weight is 7.2 kg.
The color is dark gray (RAL 7016). Included are a built-in protection against error-equal power current with 6 MA error equal strom detection (RDC-DD) and a 30 MA fault electricity protection device (RCD) of type A-SI. For safety reasons, an MNX undervoltage trigger is also integrated into the charging station. In addition, the EV ready requirements must be met. In addition, a mid-energy counter with accuracy class 1 is integrated into the charging station. The charging station can be fed by a cable that runs from behind, top or bottom. To charge electric vehicles, access control is carried out by user authentication using RFID or NFC ID. The charging station can also be used freely. The charging process can be started in a time delay. During the loading time, the performance can be limited to ensure service contact and optimize the loading time of all charging stations based on the same feed.
Two Ethernet RJ45 inputs for LAN connection. The parameters are defined with the Esetup app via Bluetooth or Ecostruxure EV Charging Expert. The charging station can be managed in standalone or clustered architecture. The OCPP 1.6 Communication protocol is used to connect to the surveillance device. The available services are CDR, diagnostic options and charging management. The charging station has CE and EV Ready certification.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This regulated ABLM switching power supply (SMPS) delivers DC voltage. It has a nominal input voltage from 100 V to 240 V AC, a nominal output current of 2.5 A at 24 V DC and a nominal output of 60 W. It is ideal for the provision of the DC voltage that is necessary for automation devices for applications in industrial, commercial and private applications such as support, taxes, food and drinks, mining, oil and gas and water. It is installed on an Omega rail or attached with a screw. It is 53 mm wide, 91 mm high and 55.6 mm deep. It offers protection against overloads and short circuits with automatic restart after the overload/short circuit source has been remedied. It weighs 0.221 kg. It is a power supply for industrial use for rail mounting. It corresponds to the standards EN62368-1, Enienc610-1/2-201, Enienc61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL61010-2-201/-201, CSAC22.2NO61010-2-201/NO61010-1 And is CE certified, Cul-Listed/recognized, RCM, CBScheme. The miniature performance switches of the ACTI9 IC60 series are recommended for your protection. The type of protection is 6 A, C curve or 10 A, B curve. On the front there is an LED that shows the presence of DC output voltage, as well as a QR code for access to the latest technical documentation. Thanks to your modular housing, you can either be installed in housings or industrial panels by clamping on an omega rail (DIN). They supply their automated systems with energy. The modular power supplies designed for simple machines and applications are primarily valued for their extreme compactness.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This regulated ABLM switching power supply (SMPS) delivers DC voltage. It has a nominal entrance from 100V to 240V AC, a nominal output current of 2.5A at 24V DC and a nominal output power of 60W. It is ideal for supplying DC voltage that is required for automation devices in industrial, commercial and private applications such as funding, packaging, control, food and drink technology, mining, oil and gas industry as well as water management. It is mounted on an omega rail or attached with a screw. Its width is 53mm, its height 91mm, its depth 55.6mm. It ensures protection against overload and short circuit with automatic re-accumulation after removing the overload/short circuit source. It weighs 0.221 kg. It is a power supply for industrial use, for rail mounting. It corresponds to the standards EN62368-1, Enienc610-1/2-201, Enienc61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL61010-2-201/-201, CSAC22.2NO61010-2-201/NO61010-1 And is certified according to CE, CUL Listed/Recognized, RCM, CBScheme. The Acti9 IC60 series of line protection switches is recommended for your protection. The type of protection is 6a, C-curve or 10a, B curve. On the front there is an LED, which indicates the presence of the output tension, as well as a QR code for access to the current technical documentation. Thanks to your modular housing, you can either be installed in cupboards or industrial boards by clamping on an omega rail (DIN). They bring energy into their automated systems. The modular power supplies are designed for simple machines and applications and are primarily valued for their extreme compactness.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
This product is part of the modicon networking range, an offer from Modicon Standard Unmanaged Switch. This unmanaged switch is delivered with Ethernet TCP/IP protocol. It has 8 transmission connections for copper cables. It offers simple connectivity for several Ethernet devices and gives customers more options for industrial applications. This product works with a power consumption of 1.5 W and a nominal voltage of 12 to 24 V DC. It has a removable 3-pin power supply connector. The dimensions are 38 mm (width) x 102 mm (height) x 79 mm (depth). The weight is 0.150 kg. The product has shielded connections that are suitable for small, isolated networks or systems with light network traffic and networking with low complexity. CE, UL, RCM, UKCA and EAC-certified and corresponds to the standards UL 61010 and EN/IEC 61131. Installation on a symmetrical DIN rail. Low power consumption and compact floor space. Simple connectivity for several Ethernet devices. The Modicon Networking series offers you an intelligent, flexible way to integrate Ethernet solutions into your company, from the device level to the control network to your company network.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
The PowerLogic PM5320 is a universal counter for front installation (96 mm x 96 mm) with a fully graphic, backlit LCD display. The meter with the accuracy class 0.5s (according to IEC 62053-22) measures energy, activity and blind power, voltage, electricity, frequency, performance factor and enables up to 31 upper vibrations. It is suitable for 50 Hz or 60 Hz applications and supply voltages in the range from 100 to 415 VAC and 125 to 250 VDC. Universal measurement for three-phase converter measurement of three or four-conductor rotary power networks via electricity converter (secondary 1 a or 5 a) and direct measurement up to 690 V AC or medium-voltage applications via voltage converter. The measurement voltage range between the phases is 35 to 690 V AC at 47 to 63 Hz, the measuring range between phase and neutral conductor 20 to 400 V AC at 47 to 63 Hz. Communication is via Ethernet (Modbus TCP, BACNET/IP, Ethernet/IP), there are also 2 configurable digital inputs and 2 configurable transistor outlets. The data is read via dynamic QR code displays. There are 35 configurable alarms and 15min load profile recording for 2 measurement sizes (e.g. kWh and KVAH) for 60 days. The product dimensions are width 96 mm, depth 72 mm, height 96 mm and weight 380 g.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
The Shelly Pro 3EM is a precise 3-phase power consumption measuring device that is simply connected via WLAN, LAN or Bluetooth. With an impressive measurement accuracy of 1%, it monitors the energy consumption of all of your household and work equipment individually, which enables you to control and optimize this data for up to 60 days, with detailed measured values being delivered every minute. In contrast to the Shelly 3em, the Pro An intelligent scripting function, has extended data and control functions and an improved firmware platform. Furthermore, the electricity meter can calculate the flow of energy in both directions - produced and consumed energy for each of the 3 phases. It also shows you the quality of your power grid by providing values for real power, blind power, tension and performance factor.
The highlights of the Pro 3em
WLAN, LAN and Bluetoth
Two-way energy consumption monitoring
Scripting function
4-quadrant measurement (energy loss acquisition)
To 1% precise measurement
Modbus support
Electricity monitoring and control
Accuracy class B (work energy)
Internal temperature sensor
4 converter inputs
Including 3x current converter 120a
Assembly: DIN rail
Two-way energy consumption monitoring
The Pro 3EM helps you to avoid unnecessary expenses and voltage waste that could damage your devices. It calculates both the produced and the energy used for each of the three phases and can monitor three separate circuits in a single -phase system. In addition, it shows you the quality of your power grid. Including acting, blind power, voltage and performance factor. So you have an overview and effectively protects your technology.
Intelligent control for your home
With the scripting functionalities and web hooks of the electricity meter, you can easily control other Shelly or WLAN devices in your local network. Use these functions to set precise settings for heating, cooling or loading your electric car based on your PV production. Your devices are automatically separated from electricity consumption and smarter manages - without a cloud connection. This is how you reduce costs, save energy and effortlessly optimize your everyday life.
Industrial institution
The Shelly supports MODBUS for precisely recording tension, electricity, power and energy consumption. You will receive precise measured values and current values to optimally monitor your energy consumption. Thanks to the firmware platform, you can make individual adjustments and send all 100ms current data to your infrastructure. So you keep an overview and benefit from a smart energy control.
Solar panels and your system at a glance
With the electricity meter you can easily follow how much energy your solar modules generate. It provides you with real -time information in your system, as well as historical data to create and consumed energy. So you keep an eye on the energy flow and maximize the performance of your PV system.
First class security for your smart energy network
The Shelly offers security through MTLs for MQTT, HTTP and safe webockets. This means that you can connect directly and safely to your cloud infrastructure without having to set up expensive and complex networks or VPN`s. So your energy network not only becomes smarter, but also more secure and cost -efficient.
Full harmony and match
Shelly devices are compatible with Alexa, Google Home, Android and iOS. So you can easily control everything by voice command. To do this, download the Shelly Smart Control app in the App Store or Google Play.
Technical data
Voltage supply: 110-240V AC
Frequency: 50/60Hz
Ambient temperature: -20 ° C - +40 ° C
Air humidity: 30-70% relative humidity
Voltage meter (RMS for each phase): 100-260V
Electricity measuring devices (RMS via CT for each phase): 0-120a
Frequency band: 2.4 MHz
Max. HF performance:
WLAN protocol: Wi-Fi 802. 11 B/g/h
Electrical consumption:
WLAN reach inside: up to 30m
WLAN reach outside: up to 50m
Weight: 0.62 kg
Dimensions: 94 x 19 x 69 mm
Scope of delivery:
1x shelly Pro 3M Smarter 3-phases of electricity meters3x CT120 power converter
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
The SMA 1PH EV Charger 7.4 is a charger for electric vehicles. It can easily be integrated into existing PV systems and installed in new systems. The charger is inexpensive, has a PV boost and overload protection. Together with the Sunny Home Manager 2.0 and the Energy app, there are many ways to set up the system as desired.
Cost effectiveness
Conventional chargers do not use small solar capacities, for example in the early morning and evening hours. This is due to the standardized minimum charge capacity of electric vehicles. This charger optimizes the use of this energy of only 1.3 kW.
PV Boost
With a combination of network and solar energy, the SMA 1PH EV Charger 7.4 kW loads up to 7.4 kW, which is almost twice as fast as with conventional charging stations.
Overvoltage protection
This safety function protects the main house connection from overload. If several appliances are operated at the same time, this may exceed the amount that can process your connection, which overloads the system. The safety in this charger adapts the charging capacity dynamically to the maximum available level.
Integration with SMA Energy
System owners have all relevant information at any time. Current information on the charging process and maximum control by configuring the loading mode. With the SMA 1PH EV Charger 7.4 you can, for example, give preference to certain devices in front of others or set a time up to which your car should be charged, and the process is started automatically.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
The SMA 3PH EV Charger 22 is a charger for electric vehicles. It can easily be integrated into existing PV systems and installed in new systems. The charger is inexpensive, has a PV boost, automatic phase switching and overload protection. Together with the Sunny Home Manager 2.0 and the Energy app, there are many ways to set up the system as desired.
Cost effectiveness
Conventional chargers do not use small solar capacities, for example in the early morning and evening hours. This is due to the standardized minimum charge capacity of electric vehicles. This charger optimizes the use of this energy of only 1.3 kW.
PV Boost
The SMA 3PH EV charger 22 uses a combination of network and solar energy to charge up to 7.4 kW, which is almost twice as fast as with conventional charging stations.
Automatic phase switch
This switching enables maximum use of the available service by starting up to 7.4 kW with a single -phase load and then switching to three -phase charging for larger solar capacities.
Overvoltage protection
This safety function protects the main house connection from overload. If several appliances are operated at the same time, this may exceed the amount that can process your connection, which overloads the system. The safety in this charger adapts the charging capacity dynamically to the maximum available level.
Integration with SMA Energy
System owners have all relevant information at any time. Current information on the charging process and maximum control by configuring the loading mode. With the SMA 3PH EV charger 22, for example, you can give certain devices in front of others or set a time up to which your car should be charged, and the process is started automatically.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA energy measuring device
Specifications:
Fast and easy installation
Universal reading of the measured values
Graphical visualization of the current measured values in the Sunny Portal
Use of standard Ethernet cables for Speedwire Communication
Universal uses regardless of existing energy meters
Simple connection to SMA Smart Home System Components
Three -phase reading of the measured values for efficient energy management
The SMA Energy meters is a powerful measuring device for intelligent energy management in SMA Smart Home, which, like a counter, records phase -accurate and balanced measurements for the electricity covered from the network. It transmits these values via Speedwire. All data about the generated photovoltaic energy, the purchased electricity and the powered energy can be transferred via a standard Ethernet cable, for example to the Sunny Home Manager or in the future to the Sunny Boy Smart Energy. This enables optimal energy monitoring, efficient load and battery management as well as reliable reliable reduction in the network at the network connection point, taking into account self-consumption.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
SMA Energy meter is energy meter and data logger in one.This device optimizes communication, monitoring and control of solar modules, solar power storage systems and generators. This intuitive device significantly makes configuration and commissioning of inverter considerably easier. It is suitable for 50 Hertz and 60-Hertz operations for one- and three-phase connections. It can be installed at the switch or in the fuse box.
The parameters of installations and inverters can be adapted from afar thanks to the new Sunny Portal. The portal system is activated by Ennexos and is free of charge if the energy meter is registered within the first 6 months after purchase.
The SMA Energy Meter also supports inverter from other manufacturers if the inverters have the SunSpec Modbus / TCP interface. Incidentally, the Emeter-20 is compatible with the EMter-30.
2-4 working days
Delivery time depending on the product. The freight forwarding goods longer after appointment. Order goods are only ordered from the manufacturer and can therefore be delayed.
