Solar technology
-
Victron Victron Smartsolar Mppt 250/70-TR
The SmartSolar Mppt 250/70-TR from Victron Energy (MPN SCC125070210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. The controller processes a whopping 70a solar power and can flexibly work with 12/24/36/48 V batteries and that with a maximum PV input voltage of 250V DC. The ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. In addition, this model dominates the parallel operation with other controllers of the same type. Compared to the SmartSolar 150/..... series, the 250/.... series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 250/70-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-L TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/70-TR 70a 12V 24V 48V Mppt Victron Energy Part number: SCC125070210 Max. PV performance: 12 V 1000 W / 24 V 2000 W / 48 V 4000 W max. ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation options Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/70-TR prefers to use and configure, which can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second, which is used with the Loader are coupled and thus offers the possibility of communication with additional devices such as the system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC125070210 SmartSolar Mppt 250/70-TR 12V 24V 48V 70A Loader1x operating instructions
€434,00
-
Victron Victron Multiplus 12/1200/50-16 230V Ve.Bus
The new Multiplus 12/1200/50-16 (Victron Energy, PMP122120000) is the successor to the Multiplus Compact 12/1200. This device is a modern device combination consisting of a powerful inverter with a pure sine wave, an advanced 50a battery loader that uses adaptive charging technology, and a 16A high-speed switch-voltage transfer switch. In the event of a mains error or, if the country current or on -board generator is interrupted, the inverter of the multis is automatically switched on and takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. Most important features of the Multiplus 12/1200/50-16 Account. at 25 ° C: 1200W Victron Energy MPN: PMP122120000 For 12V system voltage Integrated 50A network charger for your batteries Integrated 16A network transfer switch USV operation possible Extensive accessories available Can be used in numerous areas of application, whether on land or mobile Proven reliability The complete bridging with a ring transformer popology has proven itself for years. The inverter is short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature). PowerControl - (Multiplus 800VA 1200VA). With the remote control panel Multi Control, the maximum network or generator current can be set. The Multiplus then takes into account other connected alternating current consumers and only uses the electricity for charging, which is still “left”. This prevents the generator or land power connection from being overloaded. Power Assist - (Multiplus 800VA 1200VA) Load tips often only occur for a limited period of time. In such a case, the Multiplus ensures that too weak land current or generator output is immediately compensated for by energy from the battery. The load is reduced, i.e. h. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. High switch -on power This is required to switch on loads with high input flows such as voltage formers for LED lamps, halogen lamps or power tools. Search mode If the search mode is up to 'on', the power consumption of the inverter is reduced by approximately 70% for zero-load operation. In this mode, the multi switches when it is operated in the inverter mode, at zero load or with only low loads and switches on again for a short period of time every two seconds. If the output current exceeds a set limit, the inverter resumes the operation. If this is not the case, the inverter switches off again. Programmable relay In the basic setting, the multifunction relay acts as an alarm relay. Scope of delivery: Victron Energy PMP122120000, Multiplus 12/1200-16
€617,00
-
Victron Victron Phoenix inverter 12/3000 230V Smart
The Phoenix 12/3000 Smart inverter from Victron Energy (MPN PIN122300000), is a progressive inverter based on the proven Phoenix series. It offers a continuous output of 3000W and is designed for 12V battery voltage. Compared to the predecessor models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration. The Phoenix 12/3000 Smart continues to be characterized by its high switching power and reliability and thanks to the integrated ECO mode, also plays in the top division of this device class in terms of self-consumption and efficiency. Problem features Phoenix 12/3000 Smart for 12V battery voltage, output voltage range 210c - 245V Output power (not linear): 3000W, 2400W linear permanent load at 25 degrees ambient temperature 6000W top performance coping with high starting currents Integrated Bluetooth module and VE.Direct Port for wireless surveillance and system integration designed for high insertion flows Integrated alarm relay, eco mode Monitoring of the input and output voltage, load and alarms etc. via bluetooth or ve.direct Integrated, two-pin connector to connect an on/off switch (remote control) About bluetooth or ve.direct configurable parameters Alarm low battery voltage Threshold values for switching off and restarting with low battery voltage values Dynamic switching off: load-dependent switch-off threshold value Output voltage: 210 - 245V, frequency: 50 Hz or 60 Hz Threshold value for ECO mode on/off and ECO mode sensor Alarm relay High reliability thanks to the ring transformeropology The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature). Very high switching power This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools. Eco mode In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on every 2.5 seconds for a short period of time (can be regulated). If the load exceeds the preset threshold value, the inverter remains on. Remote -controlled on/off circuit A remote-controlled on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, the connection H (left) of the two-pin connector can be switched to a battery plus pole or the connection l (right) of the two-pin connector to the battery minus pole (or for example to the body of a vehicle). Scope of delivery: 1x Victron Pin122300000 Phoenix Smart 12/30001x operating instructions
€782,00
-
Victron Victron Wallbox EV charging station-NS up to 22kW 1 and 3-phase electric car
The EV Charging Station NS 22 KW (MPN: EVC200300200) from Victron Energy is a powerful electric vehicle charging station that you can operate both 3-pahsig and 1-phase. It delivers impressive 22 kW AC output in 3-phase operation, while in 1-phase mode there is still solid 7.3 kW available. Although technically identical to the EV Charging station, the new version is characterized by a modern design, which is available in 3 different colors. The setup, configuration and monitoring takes place conveniently from VictronConnect via Bluetooth and /or the integrated web interface, which can be reached via a WiFi access point or WiFi LAN. Furthermore, a GX device can be integrated and thereby enable you to control the remote control. It is particularly noteworthy that excess solar energy is used directly to charge your vehicle. Manual and time -controlled modes offer additional flexibility to meet the requirements of the electric vehicle, the energy supply system and your general electromobility. Via the EV Charging Station NS Powerful e-vehicle charging station WLAN communication 1- or 3-phase operation Easy operation and control Via Bluetooth and VictronConnect app Leuchtring to the status display 3 operating modes available Optionally available colored fronts: Black White Operation. Control and advertisement A single look in the VictronConnect app or via Bluetooth, gives you full control and overview of all operating parameters and statistics. Furthermore, a Cerbo GX communication center can optionally be consulted for remote monitoring. The charging station is equipped with a fully programmable RGB glow ring around the loading connection, which enables it to be attributed to the status of the device at a glance. With the help of the integrated web interface, this light ring can be individually configured in order to display different lighting effects according to the current state (separated, loaded, in operation, etc.). Operating modes Manual mode for configuring the output current: In manual mode it is possible to configure the output current flexibly in the range from 6 to 32 A. The charging capacity can be controlled in different ways. Either via the web interface, from a GX device and VRM remote monitoring or using VictronConnect. On this way, it is easy to initiate or end the charging process as soon as a vehicle is connected to the charging station.Optional GX device for VRM remote monitoring: Victron GX Touch 50 display panel for Cerbo GX Victron GX Touch 70 display panel for Cerbo GX Automatic mode to ensure the maximum efficiency of the PV system: The charging station automatically recognizes when excess energy is available and only uses them to charge the vehicle. Instead of energy loss that would arise, if excess energy would be lost, it is stored in the battery of the vehicle instead.Time -controlled mode for charging the vehicle at a certain point in time: Thanks to a fully programmable timer, the vehicle can be charged at different times. For example, during the night when the network costs are lower. Technical data Input voltage area: 170-265V AC Nominal charging current: 32a / phase Nominal output: 22 kW Power distribution area: 6-32 a Self -consumption: 15 mA at 230 V Operating temperature range: -25 ° C - +50 ° C Storage temperature range: -40 ° C - +80 ° C Protection class: IP44 Weight: 3 kg Dimensions: 372 x 292 x 122 mm Data communication: Modbus TCP via WLAN, Bluetooth Scope of delivery: 1x Victron Energy EV Charging Station NS 22 KW
€607,00
-
Victron Victron Lifepo4 12.8/100 smart battery 12.8V 100AH 1280Wh
The LIFEPO4 12.8V 100Ah Smart Battery (MPN BAT512110610) from Victron Energy is a Lifepo4 battery of the latest generation. At full load, the Lifepo4 saves 12.8/100 smart a whopping 1280Wh of electricity, with a very low self -discharge and outstanding lifespan. The Victron family's LIFEPO4 battery already has an integrated cell compensation and a BMS (battery management system) interface. The integrated Bluetooth to connect to the Li-Ion app round off the overall package. Victron Lifepo4 12.8V 100Ah Smart Battery Nominal voltage: 12.8V Integrated Bluetooth for connecting to the Victron Li-ion app Victron part number: BAT512110610 Name energy at 25 ° C*: 1280Wh Nominal capacity at 25 ° C / 0 ° C / -25 ° C: 100AH / 80AH / 50AH Cyclical number 80% / 70% / 50%: 2500/3000/5000 cycles Recommended continuous discharge current: 100a maximum continuous discharge current: 200a Weight: 16kg Connection terminal: M8 You can find more technical data in the official data sheet and below in the area of "technical data". Efficient, economical ...: LIFEPO4 12.8V 100Ah Smart Battery Lifepo4 batteries are expensive compared to AGM batteries or gel batteries, but in most cases the higher acquisition costs will be more than calculated. With a lifespan of up to 5000 cycles, you also exceed the maximum lifespan of the best lead-acid batteries. In addition, the LFP 12.8/100 scores with 70%in terms of space saving and weight savings. At 92%, the degree of energy is also significantly above the 80% of lead-acid batteries, which can be of essential importance, especially for offgrid systems, especially in the case of network-independent solar and/or wind turbines. MultiTalent: infinitely flexible with lithium technology from Victron Energy Lifepo4 Smart batteries from Victron can be implemented in almost all common applications. This technology has been playing an important role in the mobile area for a long time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and an irregular charging cannot harm you, they also make their way into land applications and can now be found in almost all system classes. Parallel and series circuit up to max. 3000AH at 48V Thanks to the integrated cell compensation and cell monitoring function, you can conveniently switch up to 10 batteries of this type in parallel and up to 4 10 blocks in series, which results in a maximum of 3000AH at 48V- this corresponds to a maximum storable name of around 154,000 WH (in use with the 300AH 12.8V version). Integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful to recognize a (possible) problem like a cell light weight in good time. Light note: The use of an additional BMS is imperative to interrupt or switch off if the voltage of a battery cell drops below 2.5V or to stop the charging process if the voltage of a battery cell increases to over 4.2V and switching off the system when the temperature of the cell exceeds 50 ° C. To do this, you have the choice between the BMS 12/200 and the Ve.Bus BMS - Further details can be found in the devices. Please ask the respective article descriptions. Due to the classification as a dangerous goods, this product is sent by forwarding agent! Scope of delivery: 1x Victron Energy BAT512110610 LIFEPO4 12.8V 100Ah Smart Battery1x operating instructions Further resources on the subject of lithium batteries: Victron Lifepo4 Batteries - All product families from the category LIFEPO4 battery from VE category Lithium batteries - Overall program with all available batteries from this area
€652,00
-
Victron Victron Blue Smart IP65 12/15 12V 230V battery charger
The Blue Smart IP65 12/15 12v 230V battery charger (BPC121531064R) is the latest professional, charger of Victron Energy With built -in Bluetooth. It is designed for charging 12V batteries of various types and provided a maximum charging current of 15a. Together with the free VictronConnect app, you can evaluate the activity of your battery loader easily and smartly via your smartphone, tablet or computer and even configure to a certain degree.Technical highlights of the Blue Smart IP65 12/15 battery charging devices Easy configuration and setup of the Blue Smart IP65 12/15 via Bluetooth interface Suitable for all 12V battery types Max. 15a charging current Solid protection against splash water. Dust and chemicals thanks to protection class IP65 has several functions to extend the battery life duration Automatic temperature comparison at low or high temperatures Automatic power supply function 7-stage, intelligent loading algorithm can restore fully discharged batteries "dead batteries" has low -energy mode for charging small batteries Victron article number: BPC121531064R Lithium-ion battery mode Ultra-High -efficient “green” battery chargerWith an efficiency of up to 95 %, these chargers generate three to four times less heat than the industrial standard. And, after the battery is fully charged, the power consumption is reduced to 0.5 watts, which is five to ten times better than the industrial standard.Durable, safe and quiet low heat load of the electronic components Protected against the penetration of dust, water and chemicals. Protection against overheating: The output current is reduced linearly when the temperature increases to up to 60 ° C, so the charger does not fail at extreme temperatures The chargers are absolutely noiseless thanks to passive cooling: no fan or other moving parts Reconding (recovery)A lead-construction battery. which was not sufficiently loaded or was left in the discharged state for days or weeks, deteriorates their performance due to sulfating. If the process is stopped in good time, it can partially undone the sulfation by loading the battery with low current until a higher voltage has been reached.Function for restoring fully discharged batteriesMost charging devices with polishing protection do not recognize a battery that was unloaded to zero volt or almost zero volt, and therefore do not charge them again. However, the Blue Power charger tries to recharge a fully discharged battery with low current and absorbs the normal charging process after sufficient voltage has been built up over the battery connections.Optional accessories Blue Smart IP 65 12/15 BPC121531064R 12 V cigarette lighter plug with fuse 2 meter extension cable Connection terminals with fuses M6 cable shoe connector with fuse Scope of delivery: 1x Victron BPC121531064R Blue Smart IP65 12/15 230V Battery charger1x operating instructions1x connection terminals1x M8 cable shoe connector
€163,00
-
Victron Victron Phoenix Inverter 24/1200 230V VE.Direct 1000W 24V
The Victron Phoenix 24/1200ve.direct (MPN PIN242120200) is a small sine inverter with a permanent performance of 1000W. The device converts 24V DC voltage from your battery into 230V AC AC, with a pure sine voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products. directional efficiency and modern system communicationThe efficiency of the Phoenix is excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter. The scope of the PHOENIX series Ve.direct 24/1200 is currently unique on the market for the price and goes far beyond the skills of other devices from the same performance classes.Technical features of the Phoenix 1241200 Ve.direct 1000 watts of continuous power at 230V 50Hz sinus voltage 1200 watt continuous output with non -linear load full control over almost all system parameters Suitable for all common 24V batteries 230V AC electricity with pure sinus shaft provides perfect power quality freely programmable input and offset swells freely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 1200VA Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free VICTRON app (Ve.direct Bluetooth Smart Dongle required). Fully programmable parameters: threshold values for triggering and resetting alarms with a low loading status of the battery + swelling values for switching off and restarting at low battery voltage values + output voltage 210 - 245V + swelling values for switching off and restarting at low battery voltage values + frequency 50 Hz or 60 Hz + swelling value for ECO mode on/off and Eco mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature). High switch-on power: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools. Remote-controlled insert/off connection possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug. Scope of delivery:1x Victron Pin242120200 Phoenix 24/1200 24V on 230V 1000W 50Hz 60Hz
€303,00
-
Victron Victron Phoenix Smart IP43 Charger 12/50 (1+1)
The Phoenix Smart Charger 12/50 (1+1) IP43 from Victron Energy (MPN PSC125051085) is a powerful battery charger of the latest generation. The device is designed for 12V battery voltage and, in addition to the strong 50a main charging output, also offers a secondary charging output with 3a charging power for a starter battery. The Phoenix Smart Charger 12/50 (1+1) IP43 fits into the integrated Bluetooth module in which the Victron smart family is becoming increasingly becoming, which can be perfectly networked and can also be controlled centrally. In addition to the Bluetooth module, there is also a VE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense to control the battery temperature compensation can also be connected. The proven five-stage loading algorithm and the possibility of programming its own charging algorithm make the Phoenix Smart Charger 12/50 (1+1) IP43 a universally applicable high-tec battery cador, which can optimally load almost every battery type. Perfect battery charger for boats and vehicles Phoenix smart battery charger devices that (1+1) contain in the model name have a main charging output, with a full charging current and a 3A ancillary charging output for charging starter batteries. These models are therefore particularly suitable for the mobile area. The Phoenix Smart models with (3) in the model name were developed particularly with regard to the needs in the marine area and offer three full power outputs for charging 3 battery benches. Highlights of the Phoenix Smart Charger 12/50 (1+1) IP43 Integrated Bluetooth module Integrated VE.Direct connections 1x 50a main charging output and 1 further side charging output for starter batteries Automatic voltage compensation adaptive, five -stage loading algorithm Variable constant stress phase Eye all common types of battery Prevention of damage caused by gastroplating thanks Reduced aging through storage with storage mode Lifepo4 also charges and can be connected to a BMS via optocoupler Fully programmable loading algorithm Remote on/off can be used as a power source Technical features of the Phoenix Smart 12/30 (1+1) Victron part number: PSC125051085 Number of batteries: 1 + 1 (1 main output with full power + 1x starter battery (max. 3a load) Maximum nominal charging current: 50A, battery voltage: 12V High efficiency: 94% Protection class: IP43 (electronic components), IP22 (connection area) You can find more data with the technical data Three integrated technologies for all -round healthy batteries Variable constant voltage phase: always delivers the correct load of charges With a low battery discharge (e.g. a yacht connected to the country current), a short constant voltage phase is chosen to avoid an overload. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. Prevention of damage caused by excessive gastung: Batterysafe mode In order to shorten the loading time, the highest possible charging current was selected together with a high constant voltage. However, in order for an excessive gas development to be avoided towards the end of the constant trump phase, the charger limits the speed of the voltage climb after the gas voltage has been reached (see also the graphics in the brochure). Less maintenance and aging in the resting state of the battery: the storage mode The warehouse mode is always activated if no discharge has been carried out within 24 hours. In storage mode, the loading tension is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) in order to minimize gas development and corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Also perfect for Lifepo4 battery The Phoenix Smart Charger 12/50 (1+1) IP43 can be attached to/off control by connecting a relay or an optocoupler output with an open collector by an Li-ion BMS to a remote-controlled one/output port. Alternatively, voltage and electricity can also be ruled completely via Bluetooth. Ve.direct interface, bluetooth and programmable relay The Phoenix Smart Charger 12/50 (1+1) IP43 from VICTRON is ideal thanks to the VE.Direct port for a wired data connection with a color control panel, a PC or other devices. Also note the VictronConnect app for Android and iOS, which you can use with any smartphone or tablet to be wireless and read out your Phoenix Charger via Bluetooth. Programmable relay can also be programmed via the VE.Direct interface or a Bluetooth-compatible device in order to trigger an alarm or other events. Required accessories Please note that an AC connection cable is required for the connection of the Phoenix Smart Charger 12/50 (1+1) IP43 to the power grid. This is not included. Scope of delivery1x PSC125051085 VICTRON Phoenix Smart Charger 12/50 (1+1) IP43 1x AC cable clamp 1x operating instructions
€410,00
-
Victron Victron Orion-Tr 12/24-5 isolated DC DC Konverter 12V to 24V 5a 120W
The Victron Orion-Tr 12/24-5 (MPN Ori122410110) is an isolated DC DC voltage converter and ensures a regulated DC voltage and thus for the trouble-free operation of your DC consumers. The device converts the DC input voltage (8-17V) into a controllable output voltage (20-30V) and delivers a constant permanent current of 5A, which corresponds to an output of 120W. So you can supply every 12V consumer with exactly the right voltage. With many sensitive electronics devices, compliance with the exact operating tension is essential for an impeccable function. The Orion-TR 12/24-5 also dominates the parallel circuit with identical devices and has a remote-controllable on switch. Important features of the Orion-Tr 12/24-5 120W (with a galvanic separation) 12V DC operating voltage, adjustable output voltage 20-30V can be switched in parallel with similar devices for increasing performance Remote control on and off switch Protection class IP43 Wide input span area: 8V - 17V 120W power at 5A permanent current Max. 6.3a output current high efficiency of 87% only 0.42 kg weight Not suitable for charging batteries. Please consider the use of an Orion-Tr Smart to charge the batteries. DC-DC DC converters of the Orion Family generate a clean output voltage in the range of 20-30V DC and the same possible line losses as well as fluctuations in battery voltage from a 12V power source. Remote-controllable ON/OFF switchesDue to the remote control in/out connection, no high current switch in the input cabling is no longer necessary. The remote control in/out connection can be controlled with a power saving switch or by the run/stop switch of the engine (see manual). Can be switched in parallel to increase the output current Unlimited many, identical devices can be switched in parallel to increase the output power. Scope of delivery:1x Victron Energy Ori122410110 Orion 12/24-5 DC DC converter 12V to 24V (20-30V regulable) 5A 120W
€59,23
-
Victron Victron Multi RS Solar 48/6000/100-450/100 Dual Hybrid inverter
The Multi RS Solar 48/6000/100-450/100 Dual (MPN PMR482602020) from the renowned product range from Victron Energy combines the functions of a hybrid inverter and a battery charger in an extremely powerful combination of devices in order to fulfill your energy requirement efficiently and reliably. In mid-2023 the original single-Mppt-tracker to this dual-Mppt-Tracker model with two independent Mppt-tracker inputs for a total of 6 kWp PV performance further developed. Thanks to high-frequency technology and new design, the powerful device combination only weighs 11 kg, has an excellent efficiency, a low standby performance and is also very quiet in operation. Dual model with 4 operating modes Hybrid mode: Save excess solar energy in a battery to use it at night or in times of high demand. Delivers additional electricity from the battery if the need exceeds the network capacity. Reserve mode: Switch to reserve mode during a network failure. Network -independent mode: Works without a network connection. Generator mode: Controls the generator to minimize the term. Delivers additional electricity from the battery if the need exceeds the capacity of the generator. The Victron Multi RS Solar Hybrid inverter/charger Dual-Mppt-Tracker and 6000 VA performance Efficient battery charge, pulse width modulation (PWM) Protection functions: FKS device protection Masterbus compatible: integration into energy management systems Versatile applications Programmable relay Energy optimization through back feed User -friendly, intuitive display Powerful and flexible The state -of -the -art device combination offers an impressive peak output of 6000 VA (watt), which even copes with demanding applications such as the power supply of household appliances, office equipment or electric vehicles. It not only offers a reliable power supply, but also enables you to resort excess energy into the batteries and thus increase your own consumption. With an input voltage of 48 V and a charging current of 100 A, this device enables quick and efficient charging of your batteries. The integrated pulse width modulation (PWM) for the charging voltage control ensures the optimal load of your batteries, while the FKS (Fast-Blow Fuse) device protection protects the device and your energy system from overload and short circuit. PowerControl and Power Assist The PowerControl function limits the maximum network or generator current to get the Multi RS into account for other AC loads. As a result, it only uses excess electricity to load the battery, which prevents overload. The Power Assist function ensures that batteries are immediately supported during short-term load tips and charged with reduced load. Easy operation and monitoring With a user-friendly display and an intuitive user interface, you can easily monitor and adjust the operating status and settings, as well as the battery, inverter and solar parameters, the Victron Multi RS Solar 48/6000/100-450/1 100 dual. Thanks to the master bus compatibility, you can seamlessly integrate the device into an intelligent energy management system and also control several devices with a smartphone or another Bluetooth-enabled device via the VictronConnect app. Technical data: Inverter: DC input voltage area: 38-62 V AC output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0.1 % Max. Permanent current: 25 a ac Max. Output power: 5300 W at 52 VDC Top performance: 9 kW for 3 S /7 kW for 4 min Short -circuit output current: 45 a Max. Overflow protection of the AC output: 30 a Efficiency: 96.5 % at 1 k W load Solar: Max. PV lerial voltage: 450 V Consider voltage: 120 V Mppt-Operating voltage range 80-450 V Max. Operational PV input power limitation: 13 a Max. PV conversion performance: Insp. 6 KW - 3KW pro tracker Max. PV short-circuit current: 16 a Earth closing outlet: 30 mA Isolation failure level: 100 kΩ Charger: Nominal voltage: 230 VAC Input voltage area: 187-265 VAC Nominal frequency: 50 Hz Input frequency: 45-65 Hz AC hint power: N.Z. Programmable charging range area: 36-60 V Charging voltage "constant voltage": 57.6 V (adjustable) "Conservation" charging voltage: 55.2 V (adjustable) Max. Charging current from AC: 88 A @ 57.6 VDC Max. Charging current Insurance (AC+PV): 100 A DC Battery temperature sensor: included Battery spanning sensor: yes General: Additional outcome (AC-out-2): Yes Three-phase and parallel operation: 2x 2023 Q4 Connections: ve.direct, ve.can & bluetooth Bluetooth frequency and performance: 2402–2480 MHz, 4 dbm Operating temperature range -40 to +65 ° C Maximum height 2000 m Air humidity: max. 95 %not condensing Protection class: IP21 Battery connection: M8 bolt PV connection: 2 strings with MC4 230VAC connection: screw terminals 10 mm² (6 AWG) Dimensions: 425 × 460 × 125 mm Weight: 12.3 kg Scope of delivery: 1 × Victron Multi RS Solar 48/6000/100-450/100 Dual
€1.716,00
-
Victron Victron Blue Smart 12/7 IP67 12V 230V battery charger
The Blue Smart IP 67 12/7 12v 230V battery charger from Victron Energy (MPN BPC120713006) is a smart, high-performance battery charger of the latest generation with 7A loading current for charging 12V AGM, gel and bleeding batteries as well as lithium ion batteries. In terms of function, the Blue Smart IP67 series is identical to the chargers of the Blue Smart IP 65 and IP 22 device families. Only the application environment for which these chargers are designed differ.Thanks to the integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and electricity, for adapting settings and updating the charger when new functions are available.Important features of the Blue Smart IP67 12/7 Battery charger Victron part number: BPC120713006 Model description: Blue Smart IP 67 12/7 Max. Charging current: 7a For battery voltage: 12V DC For mains voltage: 180-265 VAC 45-65 Hz Completely covered: waterproof, push -in and fire -retardant Smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage loading algorithm extends the life of your batteries thanks to the integrated warehouse mode can be used to supply 12V consumers High quality housing made of cast aluminum Protection against application errors: Polation on battery (fuse), protection against over temperature, protection against the start of the start Completely covered: waterproof, shock -protected and fire -retardantWater, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are covered with resin.One of the highest level of loading effects of all time!Set a new industrial standard: With an efficiency of at least 92 % or more, these chargers produce three to four times less heat.Adaptive 5-stage loading algorithmThe Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. "Bulk" (constant trump phase) "Absorption" (constant voltage phase) "Recondition" (regeneration phase) "Float" (loading tension phase) "Storage" (warehouse mode) Warehouse mode: Less maintenance and aging in the resting state of the batteryThe warehouse mode is always activated if no discharge has been carried out within 24 hours. In storage mode, the loading tension is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) in order to minimize gas development and corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Significant differences to the Blue Smart IP 65 familyThe two device groups differ in the following points: The type of protection, the IP 67 devices have the best possible protection Blue Smart IP 65 Retäte have a 7-stage loading algorithm, in the IP67 it is 5-stated Scope of delivery:1x Victron BPC120713006 Blue Smart IP67 12/7 7a 12V 230V Battery charger1x operating instructions1x 1.5m battery connection cable red/black
€101,00
-
Victron Victron Orion-Tr 48/12-9 isolated DC DC Konverter 48V on 12V 9a 110W
The Victron Orion-Tr 48/12-9 (MPN Ori481210110) is an isolated DC DC voltage converter and ensures a regulated DC voltage and thus for the trouble-free operation of your DC consumers. The device converts the DC input voltage (32-70V) into a adjustable 12V output voltage (10-15V) and delivers a constant permanent current of 9a, which corresponds to an output of 110W. So you can supply every 12V consumer with exactly the right voltage. With many sensitive electronics devices, compliance with the exact operating tension is essential for an impeccable function. The Orion-TR 48/12-9 also dominates the parallel circuit with identical devices and has a remote-controllable input switch. Important features of the Orion-Tr 48/12-9 110W (with a galvanic separation) 48V DC Operating voltage, controllable 12V output voltage 10-15V can be switched in parallel with similar devices for increasing performance Remote control on and off switch Protection class IP43 Wide input voltage area: 32V - 70V 110W power at 9a permanent current Max. 12.5A output current high efficiency of 87% only 0.42 kg weight Not suitable for charging batteries. Please consider the use of an Orion-Tr Smart to charge the batteries. DC-DC DC converters of the Orion Family generate a clean output voltage in the range of 10-15V DC and the same possible line losses from a 48V power source as fluctuations in battery voltage. Remote-controllable ON/OFF switchesDue to the remote control in/out connection, no high current switch in the input cabling is no longer necessary. The remote control in/out connection can be controlled with a power saving switch or by the run/stop switch of the engine (see manual). Can be switched in parallel to increase the output current Unlimited many, identical devices can be switched in parallel to increase the output power. Scope of delivery:1x Victron Energy Ori481210110 Orion 48/12-9 DC DC converter 48V to 12V (10-15V regulable) 9a 120W
€68,00
-
Victron Victron Smartsolar Mppt 250/85-TR loader controller Ve.can
The SmartSolar Mppt 250/85-TR from Victron Energy (MPN SCC125085210), belongs to the latest generation of smart solar regulators from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. This model also dominates parallel operation with other controls of the same type. Compared to the SmartSolar 150/..... series, the 250/.... series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar regulator family was able to increase the efficiency by 1 percent to a total of 99% and thus defined new standards across the sector. This value is currently the best among all solar loaders we know. Compared to the Bluesolar family, the Bluetooth module is already integrated in the controller on the 250 SmartSolar series, which makes the smart dongle unnecessary in this device if you want to analyze and configure the controller via a smartphone or tablet via Bluetooth. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 250/85-TR 85A 12V 24V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Max. PV performance: 12V 1200W / 24V 2400W / 48V 4900W max. Max. PV input current: 250 volt integrated VE.Direct data communication sport for connection with additional devices with additional devices the GX Color Control Panel or a Smart BMV battery monitor pioneering efficiency 99% Parallel operation with other 250/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart configuration and analysis via Victron Connect App Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Optionally available LCD display available for retrofitting Who the SmartSolar Mppt 250/85-TR prefer to use and configure, which can retrofit the SmartSolar Control SCC900600010 display. The display enables the controller to be easily configured via key input, and it also offers all important performance data at a glance. extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The devices of classes 250/60-TR up to 250/100-TR are also available as a version with MC4 connections on the solar page of the loader instead of the screw clamps. Scope of delivery1x Victron SCC125085210 SmartSolar Mppt 250/85-TR 12V 24V 48V 85A Loader1x operating instructions
€498,00
-
Victron Victron Bluesolar Mppt 150/35 12V 24V 48V 35A
The Victron Mppt 150/35 (MPN SCC020035000) belongs to the big family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. In addition to the larger loading and PV performance, this Blue differentiates even more from the next smaller model, the 100/30. Because the area of the battery voltage has also risen with the smallest 150 model so that 48V batterys can also be used.VE-DIRECT options for programming, data in real time and display of the course Modern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.High-speed Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 150/35 has some other innovative technologies such as Ve.direct Communication.Extensive electronic protection- Protection against the polished battery connection- PV backstream lock- Protection against overheating of the device- Protection before short circuits- Protection against the PV connection, PV connectionEssential product features of the Bluesolar 150/35 35a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 35a, 150V maximum PV empty voltage 12V: 500W/24V: 1000W/36V: 1500W/48V: 2000W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and lighting option Ve.direct data communication sportVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world.Scope of delivery1x Victron SCC020035000 Bluesolar Mppt 150/35 12V 24V 36V 48V 35A LoaderOperating instructions
€152,00
-
Victron Victron Phoenix Inverter 12/800 230V VE.Direct 700W 12V
The Victron Phoenix 12/800ve.direct (MPN PIN121800200) is a small sinus inverter with 700W permanent output. The device converts 12V DC voltage from your battery into 230V AC AC, with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products. directional efficiency and modern system communicationThe efficiency of the Phoenix is excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter. The scope of the PHOENIX series Ve.direct 12/800 is currently unique on the market for the price and goes far beyond the skills of other devices from the same performance classes.Technical features of the Phoenix 12/800 Ve.direct 700 watts of continuous power at 230V 50Hz sinus voltage 800 watt continuous output with non -linear load full control over almost all system parameters Suitable for all common 12V batteries 230V AC electricity with pure sinus shaft provides perfect power quality freely programmable input and offset swells freely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 800VA Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free VICTRON app (Ve.direct Bluetooth Smart Dongle required). Fully programmable parameters: threshold values for triggering and resetting alarms with a low loading status of the battery + swelling values for switching off and restarting at low battery voltage values + output voltage 210 - 245V + swelling values for switching off and restarting at low battery voltage values + frequency 50 Hz or 60 Hz + swelling value for ECO mode on/off and Eco mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature). High switch-on power: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools. Remote-controlled insert/off connection possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug. Scope of delivery:1x Victron Pin121800200 Phoenix 12/800 12V on 230V 700W 50Hz 60Hz
€229,00
-
Victron Victron VE.Bus BMS V2 Battery management system
The Victron Energy Ve.Bus BMS V2 (MPN: BMS300200200) is the next generation of VE.Bus BMS for Victron Lithium Smart Batteries (LFP-Smart) 12.8V and 25.6V. Each single cell of a Lifepo4 battery must be protected against overvoltage, undervoltage and over temperature. The Ve.Bus BMS V2 takes over exactly this task. The product is suitable for protecting 12V, 24V and 48V batterys and works in a operating voltage range of 9 - 70 VDC. VE-BUS BMS V2 in interaction with Victtrons Lifepo4 Batteries Victron LIFEPO4 batteries have a built-in cell compensation, temperature and voltage control (short brief designation: BTV) You will be connected to the VE.BUS BMS V2 via two M8 round connector cable sets. The BTVs of several batteries can be chained together. They can be switched in series, parallel and in a row and in parallel, which means that a battery range of 12V, 24V or 48V can be interpreted. Up to 20 batteries in one system are possible, which leads to an energy storage of max. 84KWH in a 12V system and 102kWh in a 24V and 48V system. For more details, please refer to the technical documents for our Lifepo4 battery. Core tasks of the Victron Ve.Bus BMS V2 Specially developed for use with Victron Lithium Battery Smart 12.8 V & 25.6 V batteries. Communicates directly with the lithium battery via the M8 circuit connecting cable of the battery Switch off or separate from VE.Bus inverter or inverters/chargers via Ve.bus and other loads via the terminal "load", in the event of a cell subtle voltage Switch off or separate from Ve.Bus inverter or inverters/chargers via Ve.bus, Ve.Direct and Ve.can solar charyer via a GX device and other chargers via the terminal "separate", in the case of a cell overvoltage, lower temperature or over temperature. Difference to the Ve.Bus BMS The VE.Bus BMS V2 was specially developed for use in systems with GX devices and is therefore perfect for eating or backup applications with a battery capacity of up to 84KWH (12V) or 102KWH (24V/48V).The BMS V2 also has a remote contact for remote control (on/off). Communication with Ve.Bus products Multiplus, Quattro or Phoenix inverters are connected to the "Multiplus/Quattro" connection with a standard RJ45 UTP cable.The BMS deactivates the inversion in the event of an undervoltage of the cell and loading in the event of overvoltage or over temperature of the cell Communication with remote control devices A GX device (e.g. Cerbo GX), a digital multi control (DMC) panel or a Ve.Bus Smart Dongle (including any combination) can be connected to the BMS via the "Remote control panel". This accessories can be used in combination with the BMS to controll the switching condition of the VE.Bus inverter or the inverter / charger (one / only / only charger) Clamps for additional inputs and outputs The BMS has a special power output (GX-Power) for a GX device and an additional power input (AUX-in) for an external DC source, e.g. B. a network adapter. In the event of a system shutdown, the GX device is further supplied with electricity to prevent a further unloading of the battery via the auxiliary voltage receipt or separated from the network Technical data Input voltage area: 9-70VDC Electricity intake - regular operation: 10mA (load cutting current not enclosed) GX-Pow output: 1A Aux-in input: 1a Ve.Bus interface: 2x RJ45 sockets for connection to all Ve.Bus products Operating temperature range: -20 ° C - +50 ° C Moisture: Max. 95% (not condensing) Protection class: IP20 Weight: 120gr Dimensions: 105.5 x 94.5 x 23.8 mm Scope of delivery: 1x VICTRON Energy BMS300200200 VE.Bus BMS V2 Battery Management System1x operating instructions
€167,00
-
Victron Victron charging station electric vehicle eV
The EV charging station of Victron Energy is both 3-phase and 1-phase. It delivers a maximum of 22kW AC in 3-phase mode or 7.3kw in 1-phase mode. With the integrated LCD touchscreen, the station can be monitored and controlled. An external fault current circuit breaker is required to secure (not included in the scope of delivery). A cable cross -section of 6mm² is recommended for the installation line. An electrical specialist should be consulted for connection. Important properties High charging power Wi-Fi communication LCD touchscreen Leuchtring for the quick display of the device status Configurable price/kwH-Computer Two working modes available Integration with GX devices possible Integration with VRM portal possible Two working modes to choose from You can between manual and automatic mode. The automatic mode recognizes when excess energy is available and only uses this energy to charge the vehicle. The manual mode enables a configurable output current between 6-32a. The charging capacity can be controlled either via the slider on the LCD touchscreen or via the website. It enables the loading process to start or stop manually when a vehicle is connected to the charging station. Programmable light ring The fully programmable light ring around the loading connection quickly and easily delivers the current device status. It can be programmed via the web interface so that depending on the current condition (charging, loading, separated, separated, etc.), different lighting effects are displayed. This enables the user to recognize the current charging status from a distance. 55 different lighting effects are available. Technical data Input voltage area: 170-265 V/AC Nominal charging current: 32a / phase Nominal output: 22kW Power output area: 6-32a Self -consumption: 15mA at 230V Operating temperature area. -25 ° C - +50 ° C Protection class: IP44 Weight: 3kg Dimensions: 390 x 300 x 150 mm Scope of delivery: 1x Victron Energy EV charging station
€510,00
-
Victron Victron Smartsolar Mppt 150/85-TR loader controller Ve.can
The SmartSolar Mppt 150/85-TR from Victron Energy (MPN SCC115085411), belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in part shading are only 2 of the many highlights of this new device class. The devices of classes 150/45TR to 150/100-TR are also available as a version with MC4 connections on the solar side of the loading control instead of screw clamps. This model also dominates parallel operation with other controls of the same type. Compared to the Bluesolar series, the Bluetooth module is already integrated in the controller at the SmartSolar family, which makes the smart dongle superfluous in this device. Also new is the optionally available LCD display, which can simply be attached to the SmartSolar 150/85-TR if necessary. The display then provides all important information about the controller. If necessary, the MPPT Wirbox-XL TR from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch. Essential product features of the SmartSolar 150/85-TR 85A 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader With optional LCD display Fixed integrated Bluetooth module for app -based analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available Integrated VE.direct & Ve.CAN data communication sport for connection with additional devices with additional devices to the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/85 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 85a, 150V maximum PV empty voltage Maximum PV power: 12V 1200W / 24V 2400W / 48V 4900W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Remote-controlled switching on and off over 2-pin plugs possible Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and light insulation option Smart data communication via VE.Direct and lightning-fast Bluetooth module Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected thanks to the fixed Bluetooth module and the free VICTRON Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also delivers all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point With partial shading In the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the SmartSolar device will always maximize the energy yield by Mpp set. High-speed Mpp-Tracker of the latest generation Especially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Extensive electronic protection Protection against flat battery connection PV backstream lock Protection against overheating of the device Protection before short circuits Protection against flat PV connection The Ve.direct data communication sport Ve.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC115085411 SmartSolar Mppt 150/85-TR 12V 24V 36V 48V 85A LoaderOperating instructions
€410,00
-
Victron Victron Phoenix Inverter 12/1200 230V VE.Direct 1000W 12V
The Victron Phoenix 12/1200ve.direct (MPN PIN122120200) is a small sine inverter with a continuous output. The device converts 12V DC voltage from your battery into 230V AC AC, with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products.directional efficiency and modern system communicationThe efficiency of the Phoenix is excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter.The scope of services of the Phoenix series VE.Direct 12/1200 is currently unique on the market for the price and goes far beyond the skills of other devices from the same performance classes.Technical features of the Phoenix 12/1200 Ve.direct 1000 watts of continuous power at 230V 50Hz sinus voltage 1200 watt continuous output with non -linear load full control over almost all system parameters Suitable for all common 12V batteries 230V AC electricity with pure sinus shaft provides perfect power quality freely programmable input and offset swells freely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 1200VA Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free VICTRON app (Ve.direct Bluetooth Smart Dongle required). Fully programmable parameters: threshold values for triggering and resetting alarms with a low loading status of the battery + swelling values for switching off and restarting at low battery voltage values + output voltage 210 - 245V + swelling values for switching off and restarting at low battery voltage values + frequency 50 Hz or 60 Hz + swelling value for ECO mode on/off and Eco mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).High switch-on power: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.Remote-controlled insert/off connection possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug.Scope of delivery:1x Victron Pin122120200 Phoenix 12/1200 12V on 230V 1000W 50Hz 60Hz
€303,00
-
Victron Victron Bluesolar Mppt 100/50 12V 24V 50A
The Victron Mppt 100/50 (MPN SCC020050200) belongs to the big family of bluesolar Mppt Loader And like his big siblings, he also offers ultra-fast power tracking and can thus increase the yield of your solar system. In addition to the larger loading and PV performance, this Blue differentiates even more from the next smaller model, the 100/30. More protection compared to the smaller models of the Blursolar Mppt series Compared to the 75/10, 75/15 and 100/15 model, the Bluesolar 100/50 has Mppt Via overheating protection with a switch-off function and automatic recovery after reaching a normal operating temperature. In addition, a PV backstream protection exists from this device in the Blue Mppt Family can be found.High-speed Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. In addition, the 100/50 has some other innovative technologies such as VE.Direct Communication.Options for programming, data in real time and display of the courseModern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Essential product features of the Bluesolar 100/50 50a 12V 24V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 50a, 100V maximum PV empty voltage 700W maximum PV power at 12V, 1400W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and lighting option Ve.direct data communication sportVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete canbus integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world.Scope of delivery1x Victron SCC020050200 Bluesolar Mppt 100/50 12V 24V 50A LoaderOperating instructions
€152,00
-
Victron Victron Blue Smart IP22 12/30 (3) Charger 12V 30a 3 batteries
The Blue Smart IP22 12/30 (3) charger from Victron Energy (MPN BPC123044002) is a professional, compact 12V 30A battery charger of the latest generation with 3 charging outputs and built -in Bluetooth! The Blue Smart IP22 12/30 (3) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 12V lead batteries and modern lithium batteries. It offers Highlights of the 12/30 (3) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-discharged batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 12/30 (3) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 12/30 (3) Blue Smart IP22 Charger Victron part number: BPC123044002 Lades 12V lead-acid, gel, agm and lithium batteries 30a maximum charging current 3 battery charging outputs Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other performance features of the 12/30 (3) Blue Smart IP22 Batterieladers Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 12/30 (3) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 12V battery) in order to minimize the gas development and thus prevent corrosion on the positive plates. Once pro The tension is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC123044002 12/30 (3) IP22 Blue Smart Charger 1x operating instructions
€221,00
-
Victron Victron Smartsolar Mppt 100/15 15a 12V 24V solar loader
The SmartSolar 100/15 from Victron Energy (MPN SCC110015060R) is one Mppt Solar Loader With 15a max. Charging current for charging 12V and 24V batteries. In contrast to the Bluesolar 100/15, the Smart version has integrated Bluetooth, which makes buying a Bluetooth dongels superfluous. In addition, there is communication with other Victron devices such as the Color Control GX or the Mppt Control continues to have a VE.Direct connection.The integrated Bluetooth in the SmartSolar series is the wireless solution to the setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. Optionally, the MPPT Wirbox-S 100-15 from Victron Energy is the ideal addition to your SmartSolar Loader. The cable inputs or the connection terminals of the controller are covered safely and thus protected by external influences and touch.The most important technical properties at an overview 15a max. Charging current, suitable for 12V and 24V batteries Nominal PV performance at 12V systems: 220W Nominal PV performance at 24V systems: 440W 15a load exit High top efficiency of 98% Free programmable battery loading algorithm (via the free Victron Connect App) Light-speed functions programmable (via the free Victron Connect App) Ultra -fast Maximum Power Point Tracking Max. PV empty voltage: 100V Ladeal gorithm: multi -stage, adaptive Integrated Bluetooth module Ultra -fast Maximum Power Point TrackingEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %.Intelligent load exitA deep discharge of the battery can be prevented by connecting all loads to the load exit. The load exit separates the loads when the battery has been unloaded to a given voltage value. Alternatively, an algorithm for intelligent battery management can also be selected: see BatterLife.The load exit is short -circuit -proof.Battery Life: Intelligent battery managementIf the solar charging controller is unable to charge the battery within one day to its full capacity, the status of the battery constantly changes between "partially charged" and "end of discharge". This operating mode (no regular charging) damages a lead-acid battery within a few weeks or months.The Battery-Life Algorithm monitors the charging status of the battery and if necessary, it lifts the threshold to separate the load every day (i.e. the load is separated earlier) until the energy obtained is sufficient to charge the battery to almost 100 %. From this point, the threshold value for switching off the load is modulated, so that the charge is almost 100 % reached about once a week.Scope of delivery:1x Victron Energy SCC110015060R SmartSolar Mppt 100/15 15a 12V 24V solar Loader1x operating instructions
€76,00
-
Victron Victron Orion-Tr 24/12-20 240W DC DC converter
The Victron Orion 24/12-20 240W (MPN ORI241220200R) DC DC converter ensures a regulated DC voltage and thus a fault-free operation of your electronic DC consumers. The 24/12 converts 24V direct current into 12V DC and delivers a constant permanent current of 20a which corresponds to an output of 240W. It delivers a clean 12V output voltage and compensates for any line losses and fluctuations in battery voltage. Important features of the Orion-Tr 24/12 20a 240W 24V DC operating voltage, 12V DC output voltage Wide input span area: 18V - 36V 240W power at 20A permanent current Version not isolated Scope of delivery:1x Victron Ori241220200R Orion 24/12-20 DC DC converter 24V on 12V 20A 240W
€51,00
-
Victron Victron Bluesolar Mppt 150/45 12V 24V 48V 45A
The Victron Mppt 150/45 (MPN SCC010045222) belongs to the big family of bluesolar Mppt Loader And a wide range of services for the demanding user. Ultra -fast power tracking and automatic adjustment of the Mpp There are only 2 of the many highlights of this device class. The devices of classes 150/45 to 150/100TR are also available as a version with MC4 connections on the solar side of the charge controller instead of screw clamps. In addition, this model dominates the parallel operation with other controllers of the same type.VE-DIRECT options for programming, data in real time and display of the courseModern Apple and Android Smartphones, Tablets, MacBooks and other devices, for example, can be used via VI Ve.direct with the Bluetooth Smart Dongles and the Mppt App or the GX Color Control. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us.Advanced Maximum Power Point Detection of partial shadingIn the event of a partial shading, two or more points of maximum performance can be found on the electricity voltage curve (Mpp) to be available. Conventional MPTS tend to get on a local Mpp to set. However, this may not be the optimal Mpp. The innovative algorithm of the Bluesolar device will always maximize the energy yield by Mpp set.Essential product features of the Bluesolar 150/45 45a 12V 24V 36V 48V Mppt ultra -quick Mpp-Tracker of the latest generation ensures the best possible yield even with a covered sky Automatic detection of the Mpp Tension in the case of partial shading ensures further earnings compared to "simpler" Mppt Loader Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Paralel operation with other 150/45 controls possible Regulatory constant charging voltage Regulatory conservation charging voltage Suitable for all AGM, gel, lead-acid calcium calcium and lithium batteries TR version = connection of the solar modules via screw terminals (max. 35mm²) Fully programmable charging algorithms that can later be activated and switched manually via a switch on the housing Nominal charging current 45a, 150V maximum PV empty voltage Maximum PV performance: 12V: 650W - 24V 1300W - 48V 2600W Integrated protection against battery reolving Multi-level and adaptive loading algorithm Protection level IP 43 for the electronic components and protection class IP 22 for the connection area of the controller Integrated temperature sensor compensates for conservation and constant charging voltage after temperature Day/night-time control and lighting option High-speed Mpp-Tracker of the latest generationEspecially when the sky is covered, when the light intensity changes constantly, an extremely faster improves Mppt-Regulator the energy yield compared to PWM charging controls by up to 30 % and compared to slower Mppt-Mear -down by up to 10 %. Extensive electronic protection- Protection against the polished battery connection- PV backstream lock- Protection against overheating of the device- Protection before short circuits- Protection against the PV connection, PV connectionVe.direct data communication sportVe.direct in text mode transmits all important parameters to other devices every second Loader are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete CANBUS integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world.Scope of delivery1x Victron SCC010045222 Bluesolar Mppt 150/45 12V 24V 36V 48V 45A LoaderOperating instructions
€382,00
They have 216 from 307 Seen products