-
Victron Victron AGM 12V 170Ah Super Cycle Battery C20
The 12V 170Ah Super Cycle battery Victron Energy (MPN BAT412117081) is based on the latest findings in the electrochemistry of batteries and therefore offers significantly more cycles and high resistance to deep discharge. The use of a Super Cycle battery is recommended if an occasional discharge to 100% (deep discharge) or more frequent discharge up to 60-80% is expected. Truly innovative: the Victron AGM 12V 170Ah Victron's AGM Super Cycle batteries incorporate the latest innovations from current advancements in battery electrochemistry. The paste on the positive plates does not soften quickly, even if the battery has been discharged by 100% several times. In addition, the battery chemistry has been supplemented with some additives that significantly reduce sulfation in the event of deep discharge. The bottom line is that they manage Ultra Thanks to these technical innovations, deep cycle batteries have significantly more cycles and therefore reach a longer age. Features of the Victron 12V 170Ah Super Deep Cycle AGM battery Victron part number: BAT412117081 Battery nominal voltage: 12V Battery capacity: 170Ah powerful, even after three hundred 100% deep discharges Lifespan at 20°C 7-12 years Cycles at 20°C and 40% discharge: 1000 Cycles at 20°C and 60% discharge: 700 Cycles at 20°C and 80% discharge: 500 Cycles at 20°C and 100% discharge: 300 low internal resistance smaller and lighter than conventional deep-cycle batteries very good tolerance of high current discharge Weight: 45 kg, dimensions (WxLxH): 17.2 x 33.6 x 28 cm Exceptional performance with repeated deep discharge Tests have shown that the Super Cycle battery is still powerful even after at least three hundred 100% deep discharges. During the test, the batteries were discharged daily to 10.8 V with I = 0.2 C20. They were then left in a discharged state for two hours and then charged again with I = 0.2 C20. Most batteries will be damaged if left discharged 100 times for two hours, but not the Victron 12V 170Ah Super Cycle battery. Super Cycle Batteries: Smaller and lighter Another advantage of the new chemical composition is that the batteries are smaller and weigh less compared to our previous deep cycle AGM batteries. Typical areas of application Applications with high current discharge, for example solar systems with inverters on the solar battery Applications in which complete deep discharge can occasionally occur or more frequent discharge up to 60-80% can be expected Perfect for use as a starter battery Drive battery Thrusters, winches etc. Low self-discharge Thanks to the processing of highly pure materials and lead-calcium grids in the Super Cycle AGM 12V 170Ah, it is ensured that the self-discharge of this battery is particularly low. This prevents the battery from discharging itself too quickly during long periods without charging. Scope of delivery: 1x Victron Energy BAT412117081 AGM 12V 170Ah Super Cycle battery
€480,00
-
Victron Victron Blue Smart 12/13 IP67 13A charger 12/230 volts
The Blue Smart IP 67 12/13 12V 230V battery charger from Victron Energy (MPN BPC121313006) is a smart, high-performance battery charger of the latest generation with 13A charging current for charging 12V AGM, gel and lead acid batteries as well as lithium ion batteries. In terms of functionality, the Blue Smart IP67 series is identical to the chargers in the Blue Smart IP 65 and IP 22 device families, with the exception of a few functions. Only the operating environment for which these chargers are designed differs.Thanks to integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new functions are available.Key features of the Blue Smart IP67 12/13 13A battery charger Victron part number: BPC121313006 Model name: Blue Smart IP 67 12/13 max. charging current: 13A for battery voltage: 12V DC for mains voltage: 180-265 VAC 45-65 Hz fully encased: waterproof, shockproof and fire-retardant Smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage charging algorithm extends the life of your batteries thanks to the integrated storage mode can be used to power 12V consumers High-quality cast aluminum housing Application error protection: Reverse polarity on battery (fuse), over temperature protection, output short circuit protection Fully encased: waterproof, shockproof and fire retardantWater, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are covered with resin.One of the highest charging efficiencies of all time!Setting a new industry standard: With an efficiency of at least 92% or more, these chargers produce three to four times less heat.Adaptive 5-stage charging algorithmThe Blue Smart charger is characterized by its microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adapted to the type of battery use. "Bulk" (constant current phase) "Absorption" (constant voltage phase) "Recondition" (regeneration phase) "Float" (float voltage phase) "Storage" (storage mode) Storage mode: Less maintenance and aging when the battery is idleStorage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the trickle charge voltage is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) to minimize gas evolution and corrosion on the positive plates. Once pro week the voltage is increased to the level of the gassing voltage. This creates a type of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Significant differences to the Blue Smart IP 65 familyThe two device groups differ in the following points: the protection class, the IP 67 devices have the best possible protection Blue Smart IP 65 devices have a 7-stage charging algorithm, the IP67 has 5 stages Scope of delivery:1x Victron BPC121313006 Blue Smart IP67 12/13 13A 12V 230V battery charger1x user manual1x 1.5m battery connection cable red/black
€134,00
-
Victron Victron Lynx Smart BMS 500 battery management system
Victron Energy's Lynx Smart BMS (MPN LYN034160200) is a dedicated battery management system for Victron lithium smart batteries. It includes a positive and negative bus bar, a BMS, a circuit breaker and a battery monitor. The Lynx Smart BMS is part of the modular Lynx Distribution system. Properties Built-in 500A circuit breaker for fail-safe protection Battery monitor that displays the charge status in percent and other data Alarm relay: provides a warning before the system shuts down Status and Bluetooth LED Communication via Bluetooth with VictronConnect app Communication via VE.Can with GX device Includes two VE.Can RJ45 terminators Technical data Supply voltage range: 9-58VDC Supported system voltages: 12, 24 or 48V Reverse polarity protection: yes Main safety protection continuous current: 500A continuous Peak Current Main Safety Protection: 600A for 5 minutes Power consumption in active mode: approx. 2.6W (200mA at 13V) Operating temperature range: -40°C - +60°C Protection class: IP22 Dimensions: 190 x 180 x 80 mm Weight: 2kg The Lynx distribution system The Lynx distribution system is a modular busbar system that includes DC connections, distribution, backup, battery monitoring and/or lithium battery management.The Lynx Distribution System consists of the following parts: Lynx Power In - A 4-terminal positive and negative bus bar for batteries or DC devices Lynx Distributor - A positive and negative busbar with 4 fused terminals for batteries or DC devices along with fuse monitoring Lynx Shunt VE.Can - A positive busbar with space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup in a GX device Lynx Smart BMS - For use with Victron Energy Smart Lithium batteries. It contains a positive busbar with a circuit breaker powered by a battery management system and a negative busbar with a shunt for battery monitoring. It has Bluetooth communication for monitoring and setup via the VictronConnect app and VE.Can communication for monitoring with a GX device and the VRM portal Scope of delivery: 1x Victron Energy Lynx Smart BMS (LYN034160200)2x RJ45 VE.Can terminating resistors1x user manual
€822,00
-
Victron Victron Quattro 24/5000/120 24V 230V 4000W sine wave converter 120A battery charger
The Quattro 24/5000/120-100/100 from Victron (MPN QUA245021010) is a device combination of a 24V 4000W sine wave inverter, a powerful battery charger and a transfer switch. It has two switchable AC outputs and 2 AC inputs, each equipped with a 100A transfer switch. The Quattro can be connected to two independent AC sources: for example to the public power grid and a generator or to two generators. The Quattro automatically connects to the active source.The permanently integrated battery charger delivers a remarkable 120A, which means that even large batteries can be quickly fully charged when shore/mains power is available. The 24V sine voltage converter installed in the Quattro converts your battery power into 230V alternating current. Thanks to the real sine wave, the power quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, 1 lightning-fast 100A transfer switch is installed for each AC input. Thanks to these switches, countless applications can also be implemented in the grid-connected area. In addition to the VE.Bus port, there are also 2 COM ports available for system integration, which enables virtually unlimited networking of the Quattro.Extremely flexible thanks to 2 AC inputs and 2 AC outputsThe main output ensures uninterrupted operation. In the event of a power failure or an interruption in the shore/generator power, the Quattro takes over the supply of the connected consumers. The switchover occurs so quickly (in less than 20 milliseconds) that computers and other electronic devices operate uninterrupted. The second output only supplies power when AC power is available at one of the Quattro's inputs. Consumers who are not allowed to discharge the battery, such as: B. a water heater can be connected to this output.key performance features of the Quattro 24/5000/120-100/100 4000W continuous power and 8000W peak power, for 24V battery voltage Device combination of inverter with transfer switch and 120A battery charger delivers the purest 230V sine wave voltage and a clean 50Hz frequency 2 AC inputs with integrated transfer switch / 2 x 100 A maximum switchable current 2 AC outputs + 1x additional output which only allows the current to pass to the consumer when the AC input is active. VE.Bus communication port provides extensive networking, system integration, configuration and control options for Victron's Multiplus devices. supports three-phase operation (3 identical units of the same model required) Multiplus devices can be connected in parallel; up to 6 devices can be connected in parallel, thereby significantly increasing system performance if necessary 2x COM ports are available in addition to the VE.Bus port, so there are virtually no limits to system integration PowerControl function enables working with limited generator power as well as limited shore or mains power PowerAssist function enables “performance increase” of generators and shore connection support when necessary Can be used as a UPS solution for uninterrupted power supply, thanks to the integrated transfer switch with 16A or 50A Can be used for grid-connected self-consumption systems that only draw electricity from the grid operator when the battery capacity is no longer sufficient or other programmable events have occurred 3 separately programmable relays Compatible with numerous Victron control and display panels very high efficiency and low self-consumption Massive performance expansion possibleUp to 6 Quattros can be connected in parallel. For example, with six 48/10000/140 units, this results in 54 kW/60 kVA output or 840 A charging current. Three units can be connected in a three-phase configuration. But that's not all: Up to 6 sets with three devices can be connected in parallel and you then get 162 kW/180 kVA inverter power and over 2,500 A charging capacity.PowerControl – Working with limited generator power, limited shore or grid powerThe MultiPlus is a very powerful battery charger. Therefore it draws a lot of power from the generator or shore power supply (almost 10A pro 5kVA Multi at 230 VAC). The maximum mains or generator current that can be drawn can be set using the Multi Control remote control panel. The MultiPlus then takes into account other connected AC consumers and only uses the electricity that is “left over” for charging. This prevents the generator or shore power connection from being overloaded.PowerAssist – “performance enhancement” of generators and shore connection supportThis function gives the PowerControl principle a new dimension. It allows the Quattro to support underpowered alternative sources. Load peaks often only occur for a limited period of time. In such a case, the Quattro ensures that weak shore power or generator output is immediately compensated for by energy from the battery.Back-up system: alternating current even in the event of a power failureThe Quattro can be used in both off-grid and grid-connected PV systems as well as other alternative energy systems. Power failure detection software is available.simple system configurationIf settings on a single device need to be changed, this can be done in a matter of minutes using a DIP switch setting procedure.Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software.On-site monitoring options and controlSeveral options are available: Battery monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).Remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and remote monitoring of the MultiPlus. In addition, the system data can be saved and viewed free of charge on the VRM (Victron Remote Management) website.Remote configurationWhen systems with a color control panel are connected to the Ethernet, they can be accessed and settings can be changed remotely.Scope of delivery:1x Victron QUA245021010 Quattro 24/5000/120-100/100 device combination consisting of 24V 4000W sine wave converter + 24V 120A battery charger + 2 AC inputs with integrated 100A transfer switches1x user manual
€2.272,00
-
Victron Victron MultiPlus 12/3000/120-16 12V 230V 2400W 6000W Inverter 120A Charger
The Multiplus 12/3000/120-16 from Victron Energy (MPN: PMP123020001) is a device combination of a 12V 2400W sine wave inverter and a battery charger. The permanently integrated battery charger delivers a remarkable 120A, which means that even large batteries can be quickly fully charged when shore/mains power is available. The 12V sine voltage converter built into the Multiplus converts your electricity from the battery into 230V alternating current. Thanks to the real sine wave, the power quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, a lightning-fast transfer switch is also installed, which can also be used to implement numerous grid-connected solutions. In addition to the VE.Bus port, there is also a COM port available for system integration, which enables virtually unlimited networking of the Multiplus. Can be used comprehensively and flexibly This inverter combines charger, inverter and a fast transfer switch, perfect for RVs, boats, yachts and grid connection. It ensures uninterrupted power supply in the event of network fluctuations or failures. Also ideal for self-consumption systems that only access mains power when battery power is low, or as a UPS solution that ensures uninterrupted power flow if the mains fails. About the Multiplus 12/3000/120-16 Powerful: 2400W continuous power, 6000W peak power at 12V battery voltage All-in-one device: inverter with transfer switch, 120A battery charger Reliable power supply: Pure 230V sine wave voltage, 50Hz frequency Networkability: VE.Bus communication port enables comprehensive networking, configuration and control Scalability: Parallel connection of up to 6 devices possible for higher performance Flexibility: 2 AC outputs, COM port from Multiplus 3000 for extended system integration Functions: PowerControl, PowerAssist for optimized power usage Versatility: Can be used as a UPS, suitable for grid-connected self-consumption systems Compatibility: Supports various Victron control and display panels Three-phase operation possible with identical MultiPlus inverters Massive performance expansion possible Apart from the parallel connection, three units of the same model can also be configured for a three-phase output. But that's not all: up to six sets of three units can be connected in parallel to achieve a huge 75 kW / 90 kVA inverter and over 2,000 A charging capacity (calculating with the 5000 version) Power Control Working with limited generator power, limited shore or grid power The MultiPlus is a very powerful battery charger. Therefore it draws a lot of power from the generator or shore power supply (almost 10A pro 5kVA Multi at 230 VAC). The maximum mains or generator current that can be drawn can be set using the Multi Control remote control panel. The MultiPlus then takes into account other connected AC consumers and only uses the electricity that is “left over” for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist “Increasing the performance” of generators and shore connection support This function gives the PowerControl principle a new dimension. It enables the MultiPlus to support alternative sources that are too weak. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that weak shore power or generator output is immediately compensated for by energy from the battery. Back-up system: alternating current even in the event of a power failure The Multiplus can be used in both off-grid and grid-connected PV systems as well as other alternative energy systems. Power failure detection software is available. Easy system configuration If settings on a single device need to be changed, this can be done in a matter of minutes using a DIP switch setting procedure.Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software. On-site monitoring options and control Several options are available: Battery monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and remote monitoring of the MultiPlus. In addition, the system data can be saved and viewed free of charge on the VRM (Victron Remote Management) website. Remote configuration When systems with a color control panel are connected to the Ethernet, they can be accessed and settings can be changed remotely. Technical data: Input voltage range: 9.5-17V, 19-33V, 38-66V Output voltage: 230VAC±2% - 50Hz ± 0.1% Peak power: 6000W Continuous power: 2400W Battery connection: Four M8 bolts (2 plus and 2 minus connections) 230VAC connection: screw terminals 13mm² (6 AWG) Max. efficiency: 95% Protection class: IP21 Dimensions: 362 x 258 x 218 mm Weight: 18kg Scope of delivery: 1x Victron PMP123020001 Multiplus 12/3000/120-16 device combination 1x user manual
€1.193,00
-
Victron Victron MultiPlus 12/2000/80-32 230V VE.Bus 2000W 3500W inverter 80A charger
The Multiplus 12/2000/80-32 from Victron (MPN PMP122200000) is a device combination of 12V 2000W sine wave inverter and battery charger. The permanently integrated battery charger has an impressive output of 80A, which means that even large batteries can be fully charged quickly if shore/mains power is available. The 12V sine voltage converter built into the Multiplus converts your electricity from the battery into 230V alternating current. Thanks to the real sine wave, the power quality is also perfect for sensitive electronic devices. In addition to the two integrated device types, a lightning-fast 32A transfer switch is also installed, which can also be used to implement numerous grid-connected solutions. For system integration, the MultiPlus has a VE.Bus port, which enables virtually limitless networking.Can be used comprehensively and flexiblySince it also has a lightning-fast 32A transfer switch in addition to the inverter and charger, it is an ideal inverter for motorhomes, boats or yachts and the grid-connected area of uninterruptible power supply in the event of grid fluctuations or power outages. Also for use in grid-connected self-consumption systems that only draw power from the supplier when the battery power is no longer sufficient or as a UPS solution in which the Multiplus step in if the power from the grid operator suddenly fails, thus ensuring an uninterrupted power supply.Key performance features of the Multiplus 12/2000/80-32 1600W continuous power and 3500W peak power, for 12V battery voltage Device combination of inverter with transfer switch and 80A battery charger delivers the purest 230V sine wave voltage and a clean 50Hz frequency VE.Bus communication port provides extensive networking, system integration, configuration and control options for Victron's Multiplus devices supports three-phase operation (3 identical units of the same model required) Multiplus devices can be connected in parallel; up to 6 devices can be connected in parallel, thereby significantly increasing system performance if necessary PowerControl function enables working with limited generator power as well as limited shore or mains power PowerAssist function enables “performance increase” of generators and shore connection support if necessary Can be used as a UPS solution for uninterrupted power supply, thanks to the integrated transfer switch Can be used for grid-connected self-consumption systems that only draw electricity from the grid operator when the battery capacity is no longer sufficient or other programmable events have occurred Compatible with numerous Victron control and display panels Massive performance expansion possibleApart from the parallel connection, three units of the same model can also be configured for a three-phase output. But that's not all: up to six sets of three units can be connected in parallel to achieve huge loading capacityPowerControl – Working with limited generator power, limited shore or grid powerThe MultiPlus is a very powerful battery charger. Therefore, it draws a lot of power from the generator or shore power supply. The maximum mains or generator current to be drawn can be set using the Multi Control remote control panel. The MultiPlus then takes into account other connected AC consumers and only uses the electricity that is “left over” for charging. This prevents the generator or shore power connection from being overloaded.PowerAssist – “performance enhancement” of generators and shore connection supportThis function gives the PowerControl principle a new dimension. It enables the MultiPlus to support alternative sources that are too weak. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that weak shore power or generator output is immediately compensated for by energy from the battery.Back-up system: alternating current even in the event of a power failureThe Multiplus can be used in both off-grid and grid-connected PV systems as well as other alternative energy systems. Power failure detection software is available.Easy system configurationIf settings on a single device need to be changed, this can be done in a matter of minutes using a DIP switch setting procedure.Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software.On-site monitoring options and controlSeveral options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, Smartphone or Tablet (Bluetooth Smart), Laptop or Computer (USB or RS232).Remote monitoring and control Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and remote monitoring of the MultiPlus. The system data can also be saved and viewed free of charge on the VRM (Victron Remote Management) website.Remote configurationWhen systems with a color control panel are connected to the Ethernet, they can be accessed and settings can be changed remotely.Scope of delivery:1x Victron PMP122200000 Multiplus 12/2000/80-32 device combination consisting of 12V 2000W sine converter + 12V 80A battery charger + 32A transfer switch1x user manual
€927,00
-
Victron Victron SmartSolar MPPT 150/60-Tr solar charge controller
The Victron SmartSolar MPPT 150/60-Tr is a powerful solar charge controller from the SmartSolar series for demanding 12 V, 24 V, 36 V and 48 V battery systems. It processes up to 60 A charging current and is designed for a maximum PV open-circuit voltage of 150 V. The SmartSolar series is designed for high yield, smart monitoring and flexible system integration, which is demonstrated here, among other things, by Bluetooth and VE.Direct. The TR version is designed for PV connections using screw terminals and is therefore particularly suitable for fixed wiring. With a maximum efficiency of 98% and ultra-fast MPPT tracking, the device is very well suited for changing irradiation conditions. Within the series, this model positions itself as a strong solution for medium to larger off-grid and storage applications. 60A charging current for 12V, 24V, 36V and 48V battery systems Tr version with PV screw terminals Bluetooth and VE.Direct for monitoring and integration into the Victron system The Victron SmartSolar MPPT 150/60-Tr is an efficient MPPT solar charge controller for battery systems with up to 150 V PV input voltage and 60 A charging current. It combines high solar yield with modern monitoring, flexible configuration and typical SmartSolar system compatibility. Scope of delivery: 1x Victron SmartSolar MPPT 150/60-Tr solar charge controller
€310,00
-
Victron Victron SmartSolar MPPT 250/70-Tr
The smart solar MPPT 250/70-tr from Victron Energy (MPN SCC125070210), is part of the latest generation of smart solar controllers from the Dutch premium manufacturer. The controller processes a whopping 70A solar power and can work flexibly with 12/24/36/48 V batteries with a maximum PV input voltage of 250V DC. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just 2 of the many highlights of this new device class. This model also supports parallel operation with other controllers of the same type. Compared to the Smartsolar 150/..... series, the 250/.... series can handle a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar controller family was able to increase efficiency by another 1 percent to a total of 99%, thereby setting new standards across the industry. Of all the solar charge controllers we know, this value is currently the best. In comparison to the BlueSolar family, the Bluetooth module is already firmly integrated into the controller in the 250 Smartsolar series, which makes the smart dongle superfluous in this device if you want to analyze and configure the controller via Bluetooth via smartphone or tablet. Also new is the optionally available LCD display, which can easily be attached to the SmartSolar 250/70-tr if required. The display then provides all important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar Charge controller. It securely covers the cable inputs and the connection terminals of the controller and thus protects them from external influences and contact. Key product features of the SmartSolar 250/70-tr 70A 12V 24V 48V MPPT Victron Energy Part Number: SCC125070210 Max. PV power: 12V 1000W / 24V 2000W / 48V 4000W max. nominal charging current 70A, 250V maximum PV open circuit voltage ultra-faster MPP-Tracker of the latest generation ensures the best possible yield even when the sky is overcast automatic detection of the MPP Voltage with partial shading ensures a further improvement in yield compared to "simple" MPPT Charge controller with optional LCD display Permanently integrated Bluetooth module for app-supported analysis and configuration of the controller (via the free Victron app on compatible devices) Optional LCD display available Integrated VE.Direct data communication port for connection to communicate with additional devices, the GX Color Control Panel or a Smart BMV battery monitor groundbreaking efficiency 99% Parallel operation with other 250/85 controllers possible adjustable constant charging voltage adjustable trickle charging voltage Suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries fully programmable charging algorithms that are later activated and switched manually using a switch on the housing Integrated protection against battery polarity reversal multi-stage and adaptive loading algorithm Remote-controlled switching on and off possible via 2-pin plug Degree of protection IP 43 for the electronic components and degree of protection IP 22 for the connection area of the controller Integrated temperature sensor balances maintenance and constant charging voltage according to temperature Day/night time control and light dimming options Smart configuration and analysis via Victron Connect app Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point with partial shading In the case of partial shading, two or more points of maximum power (MPP) be present. Traditional MPPTs tend to rely on a local MPP to set. However, this may not be the optimal one MPP. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by focusing on the optimal one MPP sets. High speed MPP-Latest generation tracker Especially when the sky is overcast, when the light intensity is constantly changing, improving extremely quickly MPPT-Regulators increase the energy yield compared to PWM charging controllers by up to 30% and compared to slower ones MPPT-Controls by up to 10%. Optional LCD display available for retrofitting Who the Smartsolar MPPT If you prefer to operate and configure directly, you can retrofit the Smartsolar Control SCC900600010 display. The display allows the controller to be easily configured using key input, and it also offers all important performance data at a glance. Comprehensive electronic protection Protection against reverse polarity battery connection PV reverse current barrier Protection against overheating of the device Protection against short circuits Protection against reverse polarity PV connection The VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are connected to the Charge controller are coupled and thus offers the possibility of communication with additional devices such as the GX Color Control system panel. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC125070210 SmartSolar MPPT 250/70-tr 12V 24V 48V 70A Charge controller1x user manual
€434,00
-
Victron Victron MultiPlus 12/1200/50-16 230V VE.Bus
The new MultiPlus 12/1200/50-16 (Victron Energy, PMP122120000) is the successor to the Multiplus Compact 12/1200. This device is a modern device combination consisting of a powerful pure sine wave inverter, an advanced 50A battery charger that uses adaptive charging technology, and a 16A high-speed AC transfer switch. In the event of a grid fault or if the shore power or on-board generator is interrupted, the Multi's inverter is automatically switched on and takes over the supply of the connected consumers. The switchover occurs so quickly (in less than 20 milliseconds) that computers and other electronic devices operate uninterrupted. Key features of the MultiPlus 12/1200/50-16 Cont. output power at 25°C: 1200W Victron Energy MPN: PMP122120000 for 12V system voltage Integrated 50A mains charger for your batteries Integrated 16A mains transfer switch UPS operation possible Extensive accessories available Can be used in numerous areas of application, whether on land or mobile Proven reliability Complete bridging with a ring transformer topology has proven itself for years. The inverter is short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). PowerControl – (Multiplus 800VA 1200VA only). The maximum mains or generator current that can be drawn can be set using the Multi Control remote control panel. The MultiPlus then takes into account other connected AC consumers and only uses the electricity that is “left over” for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist – (Multiplus 800VA 1200VA only) Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that weak shore power or generator output is immediately compensated for by energy from the battery. If the load is reduced, i.e. h. If consumers are switched off, the sufficient energy available can then be used to charge the batteries. High switching power This is required to switch on loads with high inrush currents such as voltage converters for LED lamps, halogen lamps or power tools. Search mode If the search mode is set to 'on', the power consumption of the inverter at no-load operation is reduced by approximately 70%. In this mode, when the Multi is operating in inverter mode, it will turn off at no or light load and turn back on for a short period of time every two seconds. If the output current exceeds a set limit, the inverter resumes operation. If this is not the case, the inverter switches off again. Programmable relay In the basic setting, the multifunction relay acts as an alarm relay, i.e. it switches off the device in the event of a fault (device becomes too hot, hum voltage at the input too high, battery voltage too low). Scope of delivery: Victron Energy PMP122120000, MultiPlus 12/1200/50-16
€617,00
-
Victron Victron Phoenix Inverter 12/3000 230V Smart
The Phoenix 12/3000 smart inverter from Victron Energy (MPN PIN122300000), is an advanced inverter based on the proven Phoenix series. It offers a continuous output of 3000W and is designed for 12V battery voltage. In comparison to the previous models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration. The Phoenix 12/3000 Smart is further characterized by its high switching power and reliability and, thanks to the integrated ECO mode, is also in the top league of this device class in terms of self-consumption and efficiency. Performance features Phoenix 12/3000 Smart for 12V battery voltage, output voltage range 210C – 245V Output power (non-linear): 3000W, 2400W linear continuous load at 25 degrees ambient temperature 6000W peak power to handle high starting currents Integrated Bluetooth module and VE.Direct port for wireless monitoring and system integration designed for high inrush currents Integrated alarm relay, ECO mode Monitoring of input and output voltage, load and alarms etc. via Bluetooth or VE.Direct Integrated, two-pin plug for connecting an on/off switch (remote control) Parameters configurable via Bluetooth or VE.Direct Low battery voltage alarm Thresholds for switching off and restarting at low battery voltage values Dynamic shutdown: load-dependent shutdown threshold Output voltage: 210 - 245V, frequency: 50 Hz or 60 Hz Threshold for ECO mode on/off and ECO mode sensor Alarm relay High reliability thanks to ring transformer topology Complete bridging with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). Very high switching power This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Eco mode In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on every 2.5 seconds for a short period of time (adjustable). If the load exceeds the preset threshold, the inverter remains switched on. Remote controlled on/off switch A remote-controlled on/off switch or a relay contact can be connected to the two-pin plug. Alternatively, the H (left) connection of the two-pin plug can be connected to a battery positive terminal or the L (right) connection of the two-pin plug can be connected to the battery negative terminal (or, for example, to the body of a vehicle). Scope of delivery: 1x Victron PIN122300000 Phoenix Smart 12/30001x user manual
€782,00
-
Victron Victron LiFePO4 12.8/100 Smart Battery 12.8V 100Ah 1280Wh
The LiFePO4 12.8V 100Ah Smart Battery (MPN BAT512110610) from Victron Energy is a latest generation LiFePO4 battery. When fully charged, the LiFePO4 12.8/100 Smart stores a whopping 1280Wh of electricity with a very low self-discharge and an outstanding service life. The LiFePO4 battery family from Victron already has integrated cell balancing and a BMS (Battery Management System) interface. The integrated Bluetooth for connection to the Li-Ion app completes the overall package. Victron LiFePO4 12.8V 100AH Smart Battery Rated voltage: 12.8V Integrated Bluetooth for connection to the Victron Li-Ion app Victron part number: BAT512110610 Rated energy at 25°C*: 1280Wh Rated capacity at 25°C/0°C/-25°C: 100Ah / 80Ah / 50Ah Number of cycles at discharge depth 80%/70%/50%: 2500 / 3000 / 5000 cycles Recommended continuous discharge current: 100A maximum continuous discharge current: 200A Weight: 16kg Connection terminal: M8 Further technical data can be found in the official data sheet and further down in the “technical data” section. Efficient, economical...: LiFePO4 12.8V 100Ah smart battery Although LiFePO4 batteries are expensive compared to AGM batteries or GEL batteries, the higher purchase costs are more than worth it in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries many times over. In addition, the LFP 12.8/100 scores 70% each in terms of space saving and weight saving. The energy utilization rate of 92% is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance in off-grid systems, especially in grid-independent solar and/or wind turbines. All-rounder: infinitely flexible with lithium technology from Victron Energy LiFePO4 smart batteries from Victron can be implemented in almost all common applications. This technology has long played an important role in the mobile sector. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000AH at 48V Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, which results in a maximum of 3000Ah at 48V - this corresponds to a maximum storable nominal energy of around 154,000 Wh (when used with the 300Ah 12.8V version). Integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful for detecting a (possible) problem such as cell imbalance in a timely manner. IMPORTANT NOTE: The use of an additional BMS is mandatory to interrupt the load when the voltage of a battery cell falls below 2.5V or to stop charging when the voltage of a battery cell rises above 4.2V and to shut down the system when the temperature of the cell exceeds 50°C. You can choose between the BMS 12/200 and the VE.Bus BMS - for further details on the devices, please refer to the respective item descriptions. Due to its classification as dangerous goods, this product will be sent by freight forwarder! Scope of delivery: 1x Victron Energy BAT512110610 LiFePO4 12.8V 100AH Smart Battery1x user manual Further resources on the topic of lithium batteries: Victron LiFePO4 batteries - All product families from the LiFePO4 battery category from VE Category Lithium batteries - Complete program with all available batteries from this range
€652,00
-
Victron Victron Blue Smart IP65 12/15 12V 230V battery charger
The Blue Smart IP65 12/15 12V 230V battery charger (BPC121531064R) is the latest professional charger from Victron Energy with built-in Bluetooth. It is designed to charge 12V batteries of various types and delivers a maximum charging current of 15A. Together with the free VictronConnect app, you can easily and smartly evaluate the activity of your battery charger via your smartphone, tablet or computer and even configure it to a certain extent.Technical highlights of the Blue Smart IP65 12/15 battery charger Easy configuration and setup of the Blue Smart IP65 12/15 via Bluetooth interface Suitable for all 12V battery types max. 15A charging current solid protection against splash water. Dust and chemicals thanks to protection class IP65 has multiple features to extend battery life Automatic temperature adjustment at low or high temperatures automatic power supply function 7-stage intelligent charging algorithm can restore completely discharged “dead batteries”. features low power mode for charging small batteries Victron part number: BPC121531064R Lithium-ion battery mode Ultra-Highly efficient “green” battery chargerWith up to 95% efficiency, these chargers produce three to four times less heat than the industry standard. And, after the battery is fully charged, power consumption is reduced to 0.5 watts, which is five to ten times better than the industry standard.Durable, safe and quiet low heat load on the electronic components protected against the ingress of dust, water and chemicals. Overheating protection: The output current is linearly reduced as the temperature increases up to 60°C, so the charger will not fail even in extreme temperatures The chargers are absolutely silent thanks to passive cooling: no fan or other moving parts Reconditioning (restoration)A lead-acid battery. that has not been sufficiently charged or left in a discharged state for days or weeks will degrade its performance due to sulfation. If the process is stopped in time, it allows the sulfation to be partially reversed by charging the battery with low current until a higher voltage is reached.Fully discharged battery recovery functionMost chargers with reverse polarity protection will not detect and therefore not recharge a battery that has been discharged to zero volts or close to zero volts. However, the Blue Power charger will attempt to recharge a fully discharged battery at low current and will resume normal charging after sufficient voltage has been established across the battery terminals.Optional accessories Blue Smart IP 65 12/15 BPC121531064R 12V cigarette lighter plug with fuse 2 meter extension cable Connection terminals with fuses M6 cable lug connector with fuse Scope of delivery: 1x Victron BPC121531064R Blue Smart IP65 12/15 12V 230V battery charger1x user manual1x connection terminals1x M8 cable lug connector
€163,00
-
Victron Victron Phoenix Inverter 24/1200 230V VE.Direct 1000W 24V
The Victron Phoenix 24/1200VE.Direct (MPN PIN242120200) is a small sine wave inverter with 1000W continuous power. The device converts 24V DC voltage from your battery into 230V AC alternating current with a pure sine wave voltage and uncompromising power quality, which is also ideal for sensitive electronic products. pioneering efficiency and modern system communicationThe efficiency of the Phoenix is excellent and, thanks to the ECO mode, one of the highest in its class. Using the VE.Direct communication port, you can use optional accessories to connect the device to a computer or smartphone and freely program some system parameters such as the switch-off voltage and restart voltage when the battery is empty! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter. The scope of services of the Phoenix VE.Direct 24/1200 series is currently unique on the market for the price and goes far beyond the capabilities of other devices in the same performance classes.technical characteristics of the Phoenix 1241200 VE.Direct 1000 watts continuous power at 230V 50Hz sine voltage 1200 watts continuous power with non-linear load full control over almost all system parameters Suitable for all common 24V batteries 230V AC power with pure sine wave delivers perfect power quality Freely programmable switch-on and switch-off thresholds Freely adjustable output voltage in the range of 210 – 245V technical highlights of the Phoenix VE.Direct series 250VA – 1200VA VE.Direct connection allows you to connect the current transformer to a computer (VE.Direct to USB interface cable required) or your smartphone on which you can always keep an eye on the status of your device using the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Low battery alarm trigger and reset thresholds + Low battery power off and restart thresholds + Output voltage 210 - 245V + Low battery power off and restart thresholds + Frequency 50 Hz or 60 Hz + ECO mode on/off threshold and ECO mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable standard setting: every 2.5 seconds). If the load exceeds a preset threshold, the inverter remains switched on. Proven Power Converter Reliability: Complete bridging with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). High switching power: This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Remote-controlled on/off switch possible: A remote-controlled on/off switch can be connected with a two-pin plug or between the positive terminal of the battery and the left contact of the two-pin plug. Scope of delivery:1x Victron PIN242120200 Phoenix 24/1200 24V to 230V 1000W 50Hz 60Hz
€303,00
-
Victron Victron Phoenix Smart IP43 Charger 12/50(1+1)
The Phoenix Smart Charger 12/50(1+1) IP43 from Victron Energy (MPN PSC125051085) is a powerful battery charger of the latest generation. The device is designed for 12V battery voltage and, in addition to the strong 50A main charging output, also offers a secondary charging output with 3A charging power for a starter battery. With its integrated Bluetooth module, the Phoenix Smart Charger 12/50(1+1) IP43 fits into Victron's ever-growing Smart family, which can be perfectly networked and centrally controlled via various methods. In addition to the Bluetooth module, there is also a VE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control the battery temperature compensation. The proven five-stage charging algorithm and the ability to program your own charging algorithm make the Phoenix Smart Charger 12/50(1+1) IP43 a universally applicable high-tech battery charger that can optimally charge almost any battery type. Perfect battery charger for boats and vehicles Phoenix Smart battery chargers, which contain (1+1) in the model name, have a main charging output with full charging current and a 3A secondary charging output for charging starter batteries. These models are therefore particularly suitable for the mobile sector. The Phoenix Smart models with (3) in the model name were developed specifically with the needs of the marine sector in mind and offer three full power outputs for charging 3 battery banks. Highlights of the Phoenix Smart Charger 12/50(1+1) IP43 integrated Bluetooth module Integrated VE.Direct connections 1x 50A main charging output and 1 additional secondary charging output for starter batteries automatic voltage compensation adaptive, five-stage charging algorithm variable constant voltage phase optimally charges all common types of batteries Prevent damage from gassing thanks to BatterySafe mode Reduced aging through storage with the storage mode also charges LiFePO4 batteries and can be connected to a BMS via optocoupler fully programmable charging algorithm Remote on/off Can be used as a power source Technical features of the Phoenix Smart 12/30(1+1) Victron part number: PSC125051085 Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max. 3A charge) maximum nominal charging current: 50A, battery voltage: 12V high efficiency: 94% Protection class: IP43 (electronic components), IP22 (connection area) Further data can be found in the technical data three integrated technologies for completely healthy batteries Variable constant voltage phase: always delivers the right amount of charge In case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is chosen to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. Preventing Damage from Excessive Gassing: The BatterySafe Mode In order to shorten the charging time, the highest possible charging current was selected together with a high constant voltage. However, to avoid excessive gas development towards the end of the constant current phase, the charger limits the rate of voltage increase after the gassing voltage has been reached (see also the graphics in the brochure). Less maintenance and aging when the battery is idle: the storage mode Storage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the trickle charge voltage is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) to minimize gas evolution and corrosion on the positive plates. Once pro week the voltage is increased to the level of the gassing voltage. This creates a type of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Also perfect for LiFePO4 batteries The Phoenix Smart Charger 12/50(1+1) IP43 can be fitted with on/off control by connecting a relay or open collector optocoupler output from a Li-Ion BMS to the remote on/off port. Alternatively, voltage and current can also be fully controlled via Bluetooth. VE.Direct interface, Bluetooth and programmable relay Thanks to the VE.Direct port, the Phoenix Smart Charger 12/50(1+1) IP43 from Victron is ideal for a wired data connection to a color control panel, a PC or other devices. Also note the VictronConnect app for Android and IOS, which you can use with any smartphone or tablet to wirelessly control and read your Phoenix Charger via Bluetooth. Also Programmable Relay can be programmed via the VE.Direct interface or a Bluetooth enabled device to trigger an alarm or other events. Required accessories Please note that an AC connection cable is required to connect the Phoenix Smart Charger 12/50(1+1) IP43 to the power supply. This is not included in delivery. Scope of delivery1x PSC125051085 Victron Phoenix Smart Charger 12/50(1+1) IP43 1x AC cable clamp 1x user manual
€410,00
-
Victron Victron Multi RS Solar 48/6000/100-450/100 Dual Hybrid Inverter
The Multi RS Solar 48/6000/100-450/100 Dual (MPN PMR482602020) from Victron Energy's renowned product range combines the functions of a hybrid inverter and a battery charger in an extremely powerful device combination to meet your energy needs efficiently and reliably. In mid-2023 the original singleMPPT-Tracker to this dual MPPT tracker model with two independent MPPT-Tracker inputs for a total of 6 kWp PV performance further developed. Thanks to high-frequency technology and a new design, the powerful device combination weighs only 11 kg, has excellent efficiency, low standby power and is also very quiet in operation. Dual model with 4 operating modes Hybrid mode: Stores excess solar energy in a battery for use at night or during times of high demand. Provides additional power from the battery when demand exceeds grid capacity. Reserve mode: Switches to reserve mode during a power failure. Off-grid mode: Works without a mains connection. Generator mode: Controls the generator to minimize runtime. Provides additional power from the battery when demand exceeds generator capacity. The Victron Multi RS Solar Hybrid inverter/charger dualMPPT-Tracker and 6000 VA power Efficient battery charging, pulse width modulation (PWM) Protective functions: FKS device protection MasterBus compatible: integration into energy management systems Versatile applications Programmable relay Energy optimization through feedback User-friendly, intuitive display Powerful and flexible The state-of-the-art device combination offers an impressive peak performance of 6000 VA (watts), which can handle even demanding applications such as powering household appliances, office equipment or electric vehicles. It not only offers a reliable power supply, but also allows you to feed excess energy back into the batteries and thus increase your own consumption. With an input voltage of 48V and a charging current of 100A, this device allows you to charge your batteries quickly and efficiently. The integrated pulse width modulation (PWM) for charging voltage control ensures optimal charging of your batteries, while the device fuse FKS (Fast-Blow Fuse) protects the device and your energy system from overload and short circuits. PowerControl and PowerAssist The PowerControl function limits the maximum mains or generator current to make the Multi RS consider other AC loads. This means it only uses excess power to charge the battery, preventing overloads. The PowerAssist function ensures that batteries provide immediate support during short-term peak loads and are charged during reduced loads. Easy to use and monitor With a user-friendly display and intuitive interface, you can easily monitor and adjust the operating status and settings, as well as battery, inverter and solar parameters, of the Victron Multi RS Solar 48/6000/100-450/100 Dual. Thanks to MasterBus compatibility, you can seamlessly integrate the device into an intelligent energy management system and also control multiple devices centrally using a smartphone or other Bluetooth-enabled device via the VictronConnect app. Technical data: Inverter: DC input voltage range: 38-62V AC output voltage: 230 VAC ± 2% Frequency: 50Hz ± 0.1% Max. continuous current: 25 A AC Max output power: 5300W at 52VDC Peak power: 9 kW for 3 s / 7 kW for 4 min Short circuit output current: 45A Max. AC output overcurrent protection: 30A Efficiency: 96.5% at 1kW load Solar: Max. PV voltage: 450 V Starting voltage: 120V MPPT-Operating voltage range 80-450V Max. operational PV input current limit: 13 A Max. PV conversion power: total 6 kW - 3 kW pro Trackers Max. PV short circuit current: 16 A Ground fault trip level: 30 mA Insulation failure level: 100 kΩ Charger: Rated voltage: 230VAC Input voltage range: 187-265VAC Rated frequency: 50 Hz Input frequency: 45-65Hz AC inrush current: N/A Programmable charging voltage range: 36-60V Charging voltage "constant voltage": 57.6 V (adjustable) "trickle" charging voltage: 55.2 V (adjustable) Max. charging current of AC: 88 A @ 57.6 VDC Max. total charging current (AC+PV): 100 A direct current Battery temperature sensor: included Battery voltage sensor: yes General: Additional output (AC-out-2): yes Three-phase and parallel operation: 2x 2023 Q4 Connections: VE.Direct, VE.Can & Bluetooth Bluetooth frequency and power: 2402-2480 MHz, 4 dBm Operating temperature range -40 to +65 °C Maximum altitude 2000 m Humidity: max. 95% non-condensing Protection class: IP21 Battery connection: M8 bolt PV connection: 2 strings with MC4 230VAC connection: screw terminals 10 mm² (6 AWG) Dimensions: 425 × 460 × 125mm Weight: 12.3kg Scope of delivery: 1× Victron Multi RS Solar 48/6000/100-450/100 Dual
€1.716,00
-
Victron Victron Blue Smart 12/7 IP67 12V 230V battery charger
The Blue Smart IP 67 12/7 12V 230V battery charger from Victron Energy (MPN BPC120713006) is a smart, high-performance battery charger of the latest generation with 7A charging current for charging 12V AGM, gel and lead acid batteries as well as lithium ion batteries. In terms of functionality, the Blue Smart IP67 series is identical to the chargers in the Blue Smart IP 65 and IP 22 device families, with the exception of a few functions. Only the operating environment for which these chargers are designed differs.Thanks to integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new functions are available.Key features of the Blue Smart IP67 12/7 battery charger Victron part number: BPC120713006 Model name: Blue Smart IP 67 12/7 max. charging current: 7A for battery voltage: 12V DC for mains voltage: 180-265 VAC 45-65 Hz fully encased: waterproof, shockproof and fire-retardant Smart configuration and monitoring via integrated Bluetooth and free app adaptive, 5-stage charging algorithm extends the life of your batteries thanks to the integrated storage mode can be used to power 12V consumers High-quality cast aluminum housing Application error protection: Reverse polarity on battery (fuse), over temperature protection, output short circuit protection Fully encased: waterproof, shockproof and fire retardantWater, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are covered with resin.One of the highest charging efficiencies of all time!Setting a new industry standard: With an efficiency of at least 92% or more, these chargers produce three to four times less heat.Adaptive 5-stage charging algorithmThe Blue Smart charger is characterized by its microprocessor-controlled, “adaptive” battery management. “Adaptive” means that the charging process is automatically adapted to the type of battery use. "Bulk" (constant current phase) "Absorption" (constant voltage phase) "Recondition" (regeneration phase) "Float" (float voltage phase) "Storage" (storage mode) Storage mode: Less maintenance and aging when the battery is idleStorage mode is activated whenever there has been no discharge within 24 hours. In storage mode, the trickle charge voltage is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) to minimize gas evolution and corrosion on the positive plates. Once pro week the voltage is increased to the level of the gassing voltage. This creates a type of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure. Significant differences to the Blue Smart IP 65 familyThe two device groups differ in the following points: the protection class, the IP 67 devices have the best possible protection Blue Smart IP 65 devices have a 7-stage charging algorithm, the IP67 has 5 stages Scope of delivery:1x Victron BPC120713006 Blue Smart IP67 12/7 7A 12V 230V battery charger1x user manual1x 1.5m battery connection cable red/black
€101,00
-
Victron Victron Orion-Tr 48/12-9 isolated DC DC converter 48V to 12V 9A 110W
The Victron Orion-Tr 48/12-9 (MPN ORI481210110) is an isolated DC-DC voltage converter and ensures a regulated DC voltage and thus the trouble-free operation of your DC consumers. The device converts the DC input voltage (32-70V) into an adjustable 12V output voltage (10-15V) and delivers a constant continuous current of 9A, which corresponds to a power of 110W. This means you can supply every 12V consumer with exactly the right voltage. For many sensitive electronic devices, maintaining the exact operating voltage is essential for perfect function. Furthermore, the Orion-Tr 48/12-9 can be connected in parallel with identical devices and has a remote-controllable on/off switch. Important features of the Orion-Tr 48/12-9 110W (with galvanic isolation) 48V DC operating voltage, adjustable 12V output voltage 10-15V Can be connected in parallel with similar devices to increase performance Remote controllable on and off switch Protection class IP43 Wide input voltage range: 32V – 70V 110W power at 9A continuous current max. 12.5A output current high efficiency of 87% only 0.42 kg weight Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries. DC-DC DC converters from the Orion family generate a clean output voltage in the range of 10 - 15V DC from a 48V power source and compensate for possible line losses and fluctuations in the battery voltage. Remote controllable on/off switchThe remote-controlled on/off connection no longer requires a high-current switch in the input wiring. The remote on/off connection can be controlled with a power saving switch or with the motor's run/stop switch (see manual). Can be connected in parallel to increase output current An unlimited number of identical devices can be connected in parallel to increase the output power. Scope of delivery:1x Victron Energy ORI481210110 Orion 48/12-9 DC DC converter 48V to 12V (10-15V adjustable) 9A 120W
€68,00
-
Victron Victron SmartSolar MPPT 250/85-Tr charge controller VE.Can
The smart solar MPPT 250/85-tr from Victron Energy (MPN SCC125085210), is part of the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just 2 of the many highlights of this new device class. This model also supports parallel operation with other controllers of the same type. Compared to the Smartsolar 150/..... series, the 250/.... series can handle a maximum PV input voltage of 250V. This is also one of the reasons why the 250 solar controller family was able to increase efficiency by another 1 percent to a total of 99%, thereby setting new standards across the industry. Of all the solar charge controllers we know, this value is currently the best. In comparison to the BlueSolar family, the Bluetooth module is already firmly integrated into the controller in the 250 Smartsolar series, which makes the smart dongle superfluous in this device if you want to analyze and configure the controller via Bluetooth via smartphone or tablet. Also new is the optionally available LCD display, which can easily be attached to the SmartSolar 150/85-tr if required. The display then provides all important information about the controller. If required, the MPPT WireBox-XL Tr from Victron Energy is the ideal addition to your SmartSolar Charge controller. It securely covers the cable inputs and the connection terminals of the controller and thus protects them from external influences and contact. essential product features of the SmartSolar 250/85-Tr 85A 12V 24V 48V MPPT ultra-faster MPP-Tracker of the latest generation ensures the best possible yield even when the sky is overcast automatic detection of the MPP Tension with partial shading ensures a further improvement in yield compared to "simple" MPPT Charge controller with optional LCD display Permanently integrated Bluetooth module for app-supported analysis and configuration of the controller (via the free Victron app on compatible devices) Optional LCD display available Max. PV power: 12V 1200W / 24V 2400W / 48V 4900W max. rated charging current 85A, 150V maximum PV open circuit voltage Max. PV input current: 250 volts Integrated VE.Direct data communication port for connection For communication with additional devices the GX Color Control Panel or a Smart BMV battery monitor groundbreaking efficiency 99% Parallel operation with other 250/85 controllers possible Adjustable constant charging voltage Adjustable trickle charging voltage Suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries fully programmable charging algorithms that are later activated and switched manually using a switch on the housing Integrated protection against battery polarity reversal multi-stage and adaptive loading algorithm Remote-controlled switching on and off possible via 2-pin plug Degree of protection IP 43 for the electronic components and degree of protection IP 22 for the connection area of the controller Integrated temperature sensor balances maintenance and constant charging voltage according to temperature Day/night time control and light dimming option Smart configuration and analysis via Victron Connect app Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point with partial shading In the case of partial shading, two or more points of maximum power (MPP) to be available. Traditional MPPTs tend to rely on a local MPP to set. However, this may not be the optimal one MPP. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by focusing on the optimal one MPP sets. High speed MPP-Latest generation tracker Especially when the sky is overcast, when the light intensity is constantly changing, improving extremely quickly MPPT- Regulators the energy yield compared to PWM charging controllers by up to 30% and compared to slower ones MPPT-Controls by up to 10%. Optional LCD display available for retrofitting Who the Smartsolar MPPT If you prefer to operate and configure directly, you can retrofit the Smartsolar Control SCC900600010 display. The display allows the controller to be easily configured using key input, and it also offers all important performance data at a glance. extensive electronic protection Protection against reverse polarity battery connection PV reverse current barrier Protection against overheating of the device Protection against short circuits Protection against reverse polarity PV connection the VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices connected to the Charge controller are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand shop. Optionally also available as a version with MC4 connections The devices from classes 250/60-Tr to 250/100-Tr are also available as a version with MC4 connections on the solar side of the charge controller instead of the screw terminals. Scope of delivery1x Victron SCC125085210 SmartSolar MPPT 250/85-tr 12V 24V 48V 85A Charge controller1x user manual
€498,00
-
Victron Victron BlueSolar MPPT 150/35 12V 24V 48V 35A
The Victron MPPT 150/35 (MPN SCC020035000) belongs to the large BlueSolar family MPPT Charge controller And like its larger siblings, it also offers ultra-fast power tracking and can therefore increase the yield of your solar system. In addition to the greater charging and PV performance, this Blue is even more different from the next smaller model, the 100/30. Because the battery voltage range has also increased with the smallest 150 model, so that 48V battery banks can also be used.VE-Direct options for programming, real-time data and history viewing Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected via VE.Direct with the Bluetooth Smart Dongles and the MPPT App or the GX Color Control can be connected. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as an option.High speed MPP-Latest generation trackerEspecially when the sky is overcast, when the light intensity is constantly changing, improving extremely quickly MPPT- Regulators the energy yield compared to PWM charging controllers by up to 30% and compared to slower ones MPPT-Controls by up to 10%. In addition, the 150/35 has some other innovative technologies such as the VE.Direct communication port.Comprehensive electronic protection- Protection against reverse polarity battery connection- PV reverse current barrier- Protection against overheating of the device- Protection against short circuits- Protection against reverse polarity PV connectionKey product features of the BlueSolar 150/35 35A 12V 24V 36V 48V MPPT ultra-faster MPP-Tracker of the latest generation ensures the best possible yield even when the sky is overcast automatic detection of the MPP Tension with partial shading ensures a further improvement in yield compared to "simple" MPPT Charge controller Integrated VE.Direct data communication port for connection For communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% fully programmable charging algorithms that are later activated and switched manually using a switch on the housing Rated charging current 35A, 150V maximum PV open circuit voltage 12V:500W/24V:1000W/36V:1500W/48V:2000W Integrated protection against battery polarity reversal multi-stage and adaptive loading algorithm Integrated temperature sensor balances maintenance and constant charging voltage according to temperature Day/night time control and light dimming option VE.Direct data communication portVE.Direct in text mode transmits all important parameters every second to other devices connected to the Charge controller are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron brand world.Scope of delivery1x Victron SCC020035000 BlueSolar MPPT 150/35 12V 24V 36V 48V 35A Charge controllerInstruction manual
€152,00
-
Victron Victron Phoenix Inverter 12/800 230V VE.Direct 700W 12V
The Victron Phoenix 12/800VE.Direct (MPN PIN121800200) is a small sine wave inverter with 700W continuous power. The device converts 12V DC voltage from your battery into 230V AC alternating current with a pure sine wave voltage and uncompromising power quality, which is also ideal for sensitive electronic products. pioneering efficiency and modern system communicationThe efficiency of the Phoenix is excellent and, thanks to the ECO mode, one of the highest in its class. Using the VE.Direct communication port, you can use optional accessories to connect the device to a computer or smartphone and freely program some system parameters such as the switch-off voltage and restart voltage when the battery is empty! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter. The scope of services of the Phoenix VE.Direct 12/800 series is currently unique on the market for the price and goes far beyond the capabilities of other devices in the same performance classes.technical characteristics of the Phoenix 12/800 VE.Direct 700 watts continuous power at 230V 50Hz sine voltage 800 watts continuous power with non-linear load full control over almost all system parameters Suitable for all common 12V batteries 230V AC power with pure sine wave delivers perfect power quality Freely programmable switch-on and switch-off thresholds Freely adjustable output voltage in the range of 210 – 245V technical highlights of the Phoenix VE.Direct series 250VA – 800VA VE.Direct connection allows you to connect the current transformer to a computer (VE.Direct to USB interface cable required) or your smartphone on which you can always keep an eye on the status of your device using the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Low battery alarm trigger and reset thresholds + Low battery power off and restart thresholds + Output voltage 210 - 245V + Low battery power off and restart thresholds + Frequency 50 Hz or 60 Hz + ECO mode on/off threshold and ECO mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable standard setting: every 2.5 seconds). If the load exceeds a preset threshold, the inverter remains switched on. Proven Power Converter Reliability: Complete bridging with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). High switching power: This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Remote-controlled on/off switch possible: A remote-controlled on/off switch can be connected with a two-pin plug or between the positive terminal of the battery and the left contact of the two-pin plug. Scope of delivery:1x Victron PIN121800200 Phoenix 12/800 12V to 230V 700W 50Hz 60Hz
€229,00
-
Victron Victron charging station electric vehicle EV
The EV charging station from Victron Energy Can be used both 3-phase and 1-phase. It delivers a maximum of 22kW AC in 3-phase mode or 7.3kW in 1-phase mode. The station can be monitored and controlled with the integrated LCD touchscreen. An external residual current circuit breaker is required for protection (not included in the scope of delivery). A cable cross section of 6mm² is recommended for the installation cable. A qualified electrician should be consulted for connection. Important properties High charging performance Wi-Fi communication LCD touchscreen Illuminated ring for quick display of device status Configurable price/kwH-Calculator Two working modes available Integration with GX devices possible Integration with VRM portal possible Two working modes to choose from You can choose between manual and automatic mode. Automatic mode detects when excess energy is available and only uses this energy to charge the vehicle. Manual mode allows a configurable output current between 6-32A. The charging power can be controlled either via the slider on the LCD touchscreen or via the website. It makes it possible to start or stop the charging process manually when a vehicle is connected to the charging station. Programmable light ring The fully programmable light ring around the charging port provides the current device status quickly and easily. It can be programmed via the web interface to display different lighting effects depending on the current status (charged, charged, disconnected, etc.). This allows the user to see the current charging status even from a distance. There are 55 different lighting effects available. Technical data Input voltage range: 170-265V/AC Rated charging current: 32A/phase Rated power: 22kW Current output range: 6-32A Own consumption: 15mA at 230V Operating temperature range. -25°C - +50°C Protection class: IP44 Weight: 3kg Dimensions: 390 x 300 x 150 mm Scope of delivery: 1x Victron Energy EV charging station
€510,00
-
Victron Victron SmartSolar MPPT 150/85-Tr charge controller VE.Can
The smart solar MPPT 150/85-tr from Victron Energy (MPN SCC115085411), is part of the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just 2 of the many highlights of this new device class. The devices from classes 150/45tr to 150/100-tr are also available as a version with MC4 connections on the solar side of the charge controller instead of screw terminals. This model also supports parallel operation with other controllers of the same type. In comparison to the BlueSolar series, the Bluetooth module in the Smartsolar family is already firmly integrated into the controller, which makes the smart dongle superfluous in this device. Also new is the optionally available LCD display, which can easily be attached to the SmartSolar 150/85-tr if required. The display then provides all important information about the controller. If required, the MPPT WireBox-XL Tr from Victron Energy is the ideal addition to your SmartSolar Charge controller. It securely covers the cable inputs and the connection terminals of the controller and thus protects them from external influences and contact. Key product features of the SmartSolar 150/85-Tr 85A 12V 24V 36V 48V MPPT ultra-faster MPP-Tracker of the latest generation ensures the best possible yield even when the sky is overcast automatic detection of the MPP Tension with partial shading ensures a further improvement in yield compared to "simple" MPPT Charge controller with optional LCD display Permanently integrated Bluetooth module for app-supported analysis and configuration of the controller (via the free Victron app on compatible devices) Optional LCD display available Integrated VE.Direct & VE.Can data communication port for connection to communicate with additional devices, the GX Color Control Panel or a Smart BMV battery monitor high maximum efficiency of 98% Parallel operation with other 150/85 controllers possible Adjustable constant charging voltage Adjustable trickle charging voltage Suitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteries fully programmable charging algorithms that are later activated and switched manually using a switch on the housing Rated charging current 85A, 150V maximum PV open circuit voltage maximum PV power: 12V 1200W / 24V 2400W / 48V 4900W Integrated protection against battery polarity reversal multi-stage and adaptive loading algorithm Remote-controlled switching on and off possible via 2-pin plug Degree of protection IP 43 for the electronic components and degree of protection IP 22 for the connection area of the controller Integrated temperature sensor balances maintenance and constant charging voltage according to temperature Day/night time control and light dimming option Smart data communication via VE.Direct and lightning-fast Bluetooth module Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the Maximum Power Point with partial shading In the case of partial shading, two or more points of maximum power (MPP) be present. Traditional MPPTs tend to rely on a local MPP to set. However, this may not be the optimal one MPP. The innovative algorithm of the SmartSolar device will always maximize the energy yield by focusing on the optimal one MPP sets. High speed MPP-Latest generation tracker Especially when the sky is overcast, when the light intensity is constantly changing, improving extremely quickly MPPT- Regulators the energy yield compared to PWM charging controllers by up to 30% and compared to slower ones MPPT-Controls by up to 10%. Comprehensive electronic protection Protection against reverse polarity battery connection PV reverse current barrier Protection against overheating of the device Protection against short circuits Protection against reverse polarity PV connection The VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices connected to the Charge controller are coupled and thus offers the possibility of communication with additional devices system panel GX Color Control. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand shop. Scope of delivery1x Victron SCC115085411 SmartSolar MPPT 150/85-Tr 12V 24V 36V 48V 85A Charge controllerInstruction manual
€410,00
-
Victron Victron Phoenix Inverter 12/1200 230V VE.Direct 1000W 12V
The Victron Phoenix 12/1200VE.Direct (MPN PIN122120200) is a small sine wave inverter with 1200W continuous power. The device converts 12V DC voltage from your battery into 230V AC alternating current with a pure sine wave voltage and uncompromising power quality, which is also ideal for sensitive electronic products.pioneering efficiency and modern system communicationThe efficiency of the Phoenix is excellent and, thanks to the ECO mode, one of the highest in its class. Using the VE.Direct communication port, you can use optional accessories to connect the device to a computer or smartphone and freely program some system parameters such as the switch-off voltage and restart voltage when the battery is empty! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter.The scope of services of the Phoenix VE.Direct 12/1200 series is currently unique on the market for the price and goes far beyond the capabilities of other devices in the same performance classes.technical features of the Phoenix 12/1200 VE.Direct 1000 watts continuous power at 230V 50Hz sine voltage 1200 watts continuous power with non-linear load full control over almost all system parameters Suitable for all common 12V batteries 230V AC power with pure sine wave delivers perfect power quality Freely programmable switch-on and switch-off thresholds Freely adjustable output voltage in the range of 210 – 245V technical highlights of the Phoenix VE.Direct series 250VA – 1200VA VE.Direct connection allows you to connect the current transformer to a computer (VE.Direct to USB interface cable required) or your smartphone on which you can always keep an eye on the status of your device using the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Low battery alarm trigger and reset thresholds + Low battery power off and restart thresholds + Output voltage 210 - 245V + Low battery power off and restart thresholds + Frequency 50 Hz or 60 Hz + ECO mode on/off threshold and ECO mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable standard setting: every 2.5 seconds). If the load exceeds a preset threshold, the inverter remains switched on. Proven Power Converter Reliability: Complete bridging with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature).High switching power: This is required to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools.Remote-controlled on/off switch possible: A remote-controlled on/off switch can be connected with a two-pin plug or between the positive terminal of the battery and the left contact of the two-pin plug.Scope of delivery:1x Victron PIN122120200 Phoenix 12/1200 12V to 230V 1000W 50Hz 60Hz
€303,00
-
Victron Victron BlueSolar MPPT 100/50 12V 24V 50A
The Victron MPPT 100/50 (MPN SCC020050200) belongs to the large BlueSolar family MPPT Charge controller And like its larger siblings, it also offers ultra-fast power tracking and can therefore increase the yield of your solar system. In addition to the greater charging and PV performance, this Blue is even more different from the next smaller model, the 100/30. More protection compared to the smaller BlurSolar models Mppt series Compared to the 75/10, 75/15 and 100/15 models, the BlueSolar has 100/50 Mppt Overheating protection with switch-off function and automatic switch-on again after normal operating temperature has been reached. There is also a PV reverse current protection which is only available in the Blue from this device onwards MPPT Family can be found.High speed MPP-Latest generation trackerEspecially when the sky is overcast, when the light intensity is constantly changing, improving extremely quickly MPPT- Regulators the energy yield compared to PWM charging controllers by up to 30% and compared to slower ones MPPT-Controls by up to 10%. In addition, the 100/50 has some other innovative technologies such as the VE.Direct communication port.Options for programming, real-time data and history viewingModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected via VE.Direct with the Bluetooth Smart Dongles and the MPPT App or the GX Color Control can be connected. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as an option.Key product features of the BlueSolar 100/50 50A 12V 24V MPPT ultra-faster MPP-Tracker of the latest generation ensures the best possible yield even when the sky is overcast automatic detection of the MPP Tension with partial shading ensures a further improvement in yield compared to "simple" MPPT Charge controller Integrated VE.Direct data communication port for connection For communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% fully programmable charging algorithms that are later activated and switched manually using a switch on the housing Rated charging current 50A, 100V maximum PV open circuit voltage 700W maximum PV power for 12V, 1400W for 24V systems Integrated protection against battery polarity reversal multi-stage and adaptive loading algorithm Integrated temperature sensor balances maintenance and constant charging voltage according to temperature Day/night time control and light dimming option VE.Direct data communication portVE.Direct in text mode transmits all important parameters every second to other devices connected to the Charge controller are coupled and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron brand world.Scope of delivery1x Victron SCC020050200 BlueSolar MPPT 100/50 12V 24V 50A Charge controllerInstruction manual
€152,00
You have seen 168 out of 212 products